Professional Documents
Culture Documents
Catalogo Victor
Catalogo Victor
Catalogo Victor
victorequip.com
ENUINE
G
S
IN 3
CE 191
V ictor is one of the oldest and most widely recognized names in gas equipment in the
world. Its founder, L.W. Stettner, having suffered the loss of an eye in a welding accident,
set out to design and build safer products for welding and cutting. Founded in 1913, the Victor
Equipment Company, originally located in San Francisco, grew rapidly and moved its base of
operations to Denton, Texas in the 1960s. Victor is now manufactured and distributed around
the globe.
The tradition of unparalleled safety standards remains a cornerstone of the Victor brand today.
Victor, the L.W. Stettner legacy, is now a part of the Thermadyne family of welding and cutting
hard goods products. Thermadyne is committed to superior quality products and service.
Thermadyne is ISO 9001:2000 certified and most of Thermadyne branded products are tested
and certified by independent, accredited agencies including UL, CSA and ETL.
Victor is committed to providing superior quality and reliable equipment that earns confidence
from customers and end users alike. Victor equipment will be recognizably better than those of
competitors by consistently meeting or exceeding expectations and by providing safe, reliable
performance time and time again. Victor has a proud heritage and long standing reputation for
quality manufacturing and service. Insist on genuine Victor gas equipment.
Sections of this entire catalog are also available for downloading on our website at
www.victorequip.com.
Table of Contents
Outfits Machine Cutting Torches
Victor Professional . . . . . . . . . . . . . . . . . . . . . . . 4-8 Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Victor CutSkill . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Design & Construction Features . . . . . . . . . . . . . . . 79
Victor FirePower . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Victor Professional
Victor Professional & Victor CutSkill Machine Torches . . . . . . . . . . . . . . . . . . . . 80-81
Totes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Cutting Machines . . . . . . . . . . . . . . . . . . . . . 82
Victor Professional
Fire-Stick & Powder Torch . . . . . . . . . . . . . . . . 13 Cutting Accessories . . . . . . . . . . . . . . . . 83-84
Regulators Welding and Heating Nozzles / Tips
Design & Construction Features . . . . . . . . . . . . . . . 14 Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Pressure Drop Reference Charts. . . . . . . . . . . . . . . 15 Heating Guide . . . . . . . . . . . . . . . . . . . . . . . . . 86-87
Reference Guide . . . . . . . . . . . . . . . . . . . . . . . 16-17 Nozzle Reference Guide . . . . . . . . . . . . . . . . . . 88-89
General Information . . . . . . . . . . . . . . . . . . . . . 18-19 Victor Heavy Industry
Flow Data (SCFH) . . . . . . . . . . . . . . . . . . . . . . . 20-24 Heating Nozzles . . . . . . . . . . . . . . . . . . . . . 90-91
Victor Professional Victor Professional
Single Stage . . . . . . . . . . . . . . . . . . . . . . . . 25-31 Heating Nozzles . . . . . . . . . . . . . . . . . . . . . 92-93
Two Stage . . . . . . . . . . . . . . . . . . . . . . . . . 32-33 Heating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
'AUGELESS s 3INGLE 3TAGE . . . . . . . . . . . . . . . . . 34 Welding Nozzles . . . . . . . . . . . . . . . . . . . . . 95-98
&LOW 'AUGE s 3INGLE 3TAGE. . . . . . . . . . . . . 35-36 Replacement Tip Ends . . . . . . . . . . . . . . . . . . . 99
Flow Meter . . . . . . . . . . . . . . . . . . . . . . . . . 37-40 Cutting Tips
Liquid Cylinder . . . . . . . . . . . . . . . . . . . . . . . . 41 Reference Guide . . . . . . . . . . . . . . . . . . . . . 100-106
High Pressure. . . . . . . . . . . . . . . . . . . . . . . 42-43 Victor Professional
Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107-112
0IPELINE s 3TATION . . . . . . . . . . . . . . . . . . . . 45-47 Victor CutSkill
0IPELINE s ,INE . . . . . . . . . . . . . . . . . . . . . . 48-50 Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113-117
0IPELINE $EVICES s &LOW -ETER . . . . . . . . . . . . . 51 Competitive Style Operational Charts . . . 118-119
0IPELINE $EVICES s 3PECIAL !PPLICATION . . . . 52-53 Competitive Style Tips . . . . . . . . . . . . . . 120-122
Victor CutSkill
Single Stage . . . . . . . . . . . . . . . . . . . . . . . . 54-56 Safety Accessories
Flow Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . 123
Flow Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Victor Heavy Industry
Victor FirePower Flamebuster Flashback Arrestors &
Single Stage . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . 124
Victor Professional
Handles and Attachments Flamebuster Flashback Arrestors &
Design & Construction Features . . . . . . . . . . . . . . . 60 Check Valves . . . . . . . . . . . . . . . . . . . . . 125-127
Handles Victor CutSkill
Victor Heavy Industry . . . . . . . . . . . . . . . . . . . . 61 Flashback Arrestors . . . . . . . . . . . . . . . . . . . . 127
Victor Professional . . . . . . . . . . . . . . . . . . . 62-63
Victor CutSkill & Victor FirePower . . . . . . . . . . . 64 CGA Gas Cylinder Valve Outlets &
Attachments Connections . . . . . . . . . . . . . . . . . . . . . . . 128-133
Victor Professional . . . . . . . . . . . . . . . . . . . 65-66 Victor Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Victor CutSkill & Victor FirePower . . . . . . . . . . . 67
Victor Limited Warranty . . . . . . . . . . . . . 135
Straight Cutting Torches
Design & Construction Features . . . . . . . . . . . . . . . 68
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . 69
Victor Heavy Industry
Torches . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-75
Victor Professional
Torches . . . . . . . . . . . . . . . . . . . . . . . . . . . 76-77
3
Outfits 6ICTOR 0ROFESSIONAL s Heavy Duty
Journeyman
Journeyman
Journeyman II
Journeyman II
4
6ICTOR 0ROFESSIONAL s Heavy Duty
Outfits
Contender
This heavy duty outfit cuts up to 3/4" (19.1mm)
Contender
CUTTING, HEATING AND WELDING OUTFIT
or 8" (203.2mm) with optional tips. It welds up to 3"
(76.2mm) with optional nozzles.
s %33 3ERIES REGULATORS
s &# TORCH HANDLE WITH BUILT IN mASHBACK
arrestors and check valves
s #! CUTTING ATTACHMENT
and
We
ng,
Cutti lding Gu
ing
Heat ide
s -&! HEATING NOZZLE SIZE
s CUTTING TIP
s 4 GRADE HOSE g X M X MM
s 3TRIKER
Contender AF
This heavy duty outfit is capable of cutting up to 8"
Contender (204mm) with the appropriate cutting tip.
CUTTING, HEATING AND WELDING OUTFIT
5
Outfits 6ICTOR 0ROFESSIONAL s Heavy Duty
Journeyman Select
Journeyman This heavy duty outfit cuts up to 8" (203.2mm) and welds
WELDING & CUTTING OUTFIT
Select up to 3" (76.2mm) with accessories.
s &# TORCH HANDLE WITH BUILT IN mASHBACK
arrestors and check valves
s #! CUTTING ATTACHMENT
100
CUTTING
&
s #32 3ERIES REGULATORS
15 WELDING ING GUIDE
1500 20
00
40
16
1000
5
0
2500
00
30 500
200
3000
2000
3500
4000
00
24
2800
Journeyman
WELDING & CUTTING OUTFIT
Select
A THERMADYNE Company
6
6ICTOR 0ROFESSIONAL s Heavy Duty
Outfits
Cutter Select ST 1000FC
This heavy duty outfit cuts up to 5" (127.0mm) with
accessories.
s 34 &# CUTTING TORCH BOTTOM REAR LEVER POSITION
with built-in flashback arrestors and check valves
s #32 3ERIES REGULATORS
s !VAILABLE WITH OR ª HEAD ANGLE
7
Outfits 6ICTOR 0ROFESSIONAL s Medium Duty
Performer
Performer
Performer This medium duty ouftfit cuts up to 1/2" (12.7mm)
CUTTING, HEATING AND WELDING OUTFIT
or 6" (152.4mm) with optional tips. It welds up to 1/4"
(6.4mm) or 1.25" (31.8mm) with optional nozzles.
s %33 3ERIES REGULATORS
s &# TORCH HANDLE WITH BUILT IN
flashback arrestors and check valves
ng,
Cutti lding Gu
We
ing
Heat ide s #! CUTTING ATTACHMENT
and
8
6ICTOR #UT3KILL s Heavy Duty
Outfits
450 Outfit
EXTRA HEAVY DUTY
This heavy duty outfit cuts up to 3/4" (19.1mm) or 6"
WELDING & CUTTING OUTFIT
CutSkill
EQUIPEMENT DE SOUDRE ET DE DECOUPAGE1 PO DE SOLDADURA Y CORTE
(152.4mm) with optional tips. It welds up to 1/8" (3.2mm)
Features...
8
12
1500 2000
1000 2500
16
Caracteristiques... UL
800
1200 or 3" (76.2mm) with optional nozzles.
20
16
4
40
00
500 3000
0
3500
2000
4000
28 00
24
2800
C u tSk
ill Cu t
Sk
il s 7( &# 6 TORCH HANDLE WITH BUILT IN
l
flashback arrestors and check valves
s #! 6 CUTTING ATTACHMENT
s 5- WELDING NOZZLE
s CUTTING TIP
s 2- GRADE HOSE g X M X MM
and
Welding
Cutting, Guide ar
Heating ar y Cot
para Sold to page
Equip entamen e et Cou
y Cali dur
le Son
Ensemb uffage RTAN
T
et Cha
s 4OOLBOX
IMPO
350 Outfit
This heavy/medium duty outfit cuts up to 3/4" (19.1mm)
or 6" (152.4mm) with optional tips. It welds up to 1/8"
(3.2mm) or 3" (76.2mm) with optional nozzles.
s 2# 3ERIES REGULATORS
s 7( &# 6 TORCH HANDLE WITH BUILT IN
flashback arrestors and check valves
s #! 6 CUTTING ATTACHMENT
s 5- WELDING NOZZLE
s CUTTING TIP
s 2- GRADE HOSE g X M X MM
s 4OOLBOX
s 3TRIKER AND SOFT SIDED GOGGLES
9
Outfits 6ICTOR #UT3KILL s Medium Duty
250 Outfit
This medium duty outfit cuts up to 1/2" (12.7mm) or
5" (127.0mm) with optional tips. It welds up to 5/64"
(2.0mm) or 1.25" (31.8mm) with optional nozzles.
s 2# 3ERIES REGULATORS
s 7( &# 6 TORCH HANDLE WITH BUILT IN
flashback arrestors and check valves
s #! 6 CUTTING ATTACHMENT
s 5- WELDING NOZZLE SIZE
s CUTTING TIP
s 2- GRADE HOSE g X M X MM
s 4OOLBOX
s 3TRIKER AND SOFT SIDED GOGGLES
250AF Outfit
Capable of cutting up to 5" (127.0mm) with
appropriate cutting tip.
s 2# 3ERIES REGULATORS
s 7( &# 6 TORCH HANDLE WITH BUILT IN
flashback arrestors and check valves
s #! 6 CUTTING ATTACHMENT
s -&. HEATING NOZZLE SIZE
s '0. CUTTING TIP
s 4 GRADE HOSE g X M X MM
s 4OOLBOX
s 3TRIKER AND SOFT SIDED GOGGLES
10
6ICTOR &IRE0OWER s Heavy / Medium Duty
Outfits
350 SER
IES HEAVY
DUTY
FirePo
wer FP 350 Series
This heavy/medium duty outfit cuts up to 3/4" (19.1mm)
or 5" (127.0mm) with optional tips. It welds up to 1/8"
(3.2mm) or 3" (76.2mm) with optional nozzles.
WELDIN ENSEM
BLE DE
G & CU EQUIPO
SOUDAG
E ET
PARA SO DE COUPAGE s 2& HEAVYMEDIUM DUTY REGULATORS
TTING LDAR Y
COTAR
s 7( &# &3 TORCH HANDLE WITH BUILT IN
OUTFIT
flashback arrestors and check valves
s #! &3 CUTTING ATTACHMENT
s 5- WELDING NOZZLE
s CUTTING TIP
8
15
00 20
s 2 GRADE HOSE g X M X MM
4
10
50 00 00
0 25
00
Fir
e
Po
we
r
Fir
e
Po
w er
FP 250 Series
This medium duty outfit cuts up to 1/2" (12.7mm) or 3"
(76.2 mm) with optional tips. It welds up to 5/64" (2.0mm)
or 3" (76.2mm) with optional nozzles.
s 2& MEDIUM DUTY REGULATORS
s 7( &# &3 TORCH HANDLE WITH BUILT IN
flashback arrestors and check valves
s #! &3 CUTTING ATTACHMENT
s 5- WELDING NOZZLE
s CUTTING TIP
s 2 GRADE HOSE g X M X MM
s 3TRIKER AND GOGGLES
11
Outfits 6ICTOR 0ROFESSIONAL s Medium Duty
Portable Tote
This medium duty portable outfit cuts up to 1/2" (12.7mm)
or 4" (101.6mm) with optional tips. It welds up to 1/4"
(6.4mm) or 1.25" (31.8mm) with optional nozzles.
s #32 3ERIES REGULATORS
s &# TORCH HANDLE WITH BUILT IN mASHBACK
arrestors and check valves
s #! CUTTING ATTACHMENT
s 7 WELDING NOZZLE SIZE
s 3ERIES CUTTING TIP
s 4 GRADE HOSE g X M X MM
s 3TRIKER AND GOGGLES
A THERMADYNE Company
The Portable Torch
Optional
s CU FT #'! ACETYLENE CYLINDER
s CU FT #'! OXYGEN CYLINDER
Portable Tote
This medium duty portable outfit has a rugged patented
design with a molded plastic carrying case and cuts up to
1.25" (31.8mm) or welds up to 3/32" (2.4mm).
s 32 #2 REGULATOR
s 32 !2 REGULATOR
s 7( &# 6 WELDING TORCH WITH BUILT IN
flashback arrestors and check valves
s #! 6 CUTTING ATTACHMENT
s 5- WELDING NOZZLE
s CUTTING TIP
s 2- GRADE HOSE g X M X MM
CUTSKILL
Optional
s CU FT #'! ACETYLENE CYLINDER
s CU FT #'! OXYGEN CYLINDER
12 Totes
Victor Professional
Outfits
Fire-Stick
TORCH KIT
s 4WO MODELS AVAILABLE WITH OR WITHOUT REGULATOR
s &OR PROPANE HOSE APPROVED FOR ,0
Torch Kit 13
Regulators
Single Stage Regulators: Brass Adjusting Screw
Recommended for applications where With forged T-handle
slight delivery pressure increases (due to
decreasing cylinder pressures) would not Delrin Insert Bushing
affect the performance characteristics of the For durability, easier adjusting
work or test results.
Die-Forged Brass
Spring Housing Cap
Stainless Ball in Key Provides greater strength
For easy adjustment and durability
Stainless Steel Diaphragm
Adjusting Spring Gives accurate long lasting service
Pretested for quality Stem-Type Seat Mechanism
assurance Inlet pressure aids in sealing
Die-Forged
Brass Body
For extra strength
Two stage regulators add the following in addition to the features listed above:
250 8.0 12.6 19.4 2.7 5.0 7.9 11.0 * * 2.2 3.9 * * * 2.6
50
500 14.1 18.2 3.4 5.9 7.7 13.3 * 2.9 4.7 8.0
750 8.8 12.3 17.8 3.8 6.0 9.8 10.9
100 * 2.6 3.8 7.1 * * * 2.8 * * * * * * * *
250 6.0 9.4 13.3 23.1 3.0 3.8 6.0 8.2 * * * 2.8 * * * 2.0
75 500 19.7 10.7 13.8 19.8 2.5 3.9 6.3 9.4 2.0 3.4 5.9
750 22.5 6.6 8.8 13.7 18.8 2.7 4.1 7.0 12.2
1000 11.8 14.7 22.6 4.9 6.9 12.0 20.3
100 * * 2.7 4 * * * * * * * * * * * *
250 4.7 6.7 10.3 16.9 2.2 2.8 4.3 6.0 * * * 2.2 * * * *
500 14.1 21.0 8.1 10.8 15.0 21.2 2.0 2.9 4.4 7.1 * * 2.1 4.6
100
750 17.7 23.0 32.3 42.8 4.7 6.9 10.3 15.4 * 2.9 4.9 8.7
1000 31.0 37.0 53.0 68.5 8.6 11.8 17.4 3.1 5.2 8.8 14.4
1500 65.5 82.0 19.1 7.7 11.8 19.4
150 4.0 1.2 1.7 2.7 4.8 0.5 0.8 1.2 2.2
25 0.3 0.5 0.8 1.4 ** ** 0.3 0.7 ** ** ** ** ** ** ** **
50 0.9 1.6 2.5 4.9 0.5 0.7 1.1 2.0 ** ** 0.3 0.6 ** ** ** 0.3
75 2.0 3.1 6.3 0.9 1.4 2.2 3.7 0.3 0.4 0.5 0.6 ** ** 0.3 0.6
10 100 4.5 5.4 1.6 2.0 3.6 6.0 0.4 0.6 0.9 2.2 ** 0.3 0.5 1.9
150 7.0 3.2 4.5 7.3 0.9 1.3 2.1 3.9 0.4 0.6 1.0 2.5
250 8.1 2.3 3.5 5.2 9.8 0.9 1.4 2.5 4.4
500 8.2 3.3 4.8 8.3
25 ** 0.4 1.3 ** ** 0.3 0.6 ** ** ** ** ** ** ** **
50 0.8 1.4 4.6 0.4 0.6 0.9 1.6 ** ** ** 0.4 ** ** ** 0.3
75 1.9 2.9 10.0 0.8 1.2 1.9 3.0 ** 0.3 0.5 1.0 ** ** 0.3 0.5
14 100 3.5 5.1 1.4 2.0 3.0 4.7 0.3 0.6 0.7 1.7 ** 0.3 0.4 0.8
150 7.9 2.9 4.0 6.0 8.7 0.8 1.2 1.7 3.4 0.3 0.5 0.9 1.6
250 7.4 9.5 2.0 3.1 4.5 8.1 0.7 1.2 2.3 3.8
500 8.7 10.5 13.7 2.9 4.0 8.1 11.5
Flow Meters
Model Stage Duty Type Feature/Type Kit/Outfit Usage
HSR Single Stage Medium Duty Cylinder Flow Meter -
HVTS Two Stage Medium Duty Cylinder Flow Meter -
HRF 2400 Single Stage Medium Duty Cylinder Flow Meter -
16 Reference Guide
Regulators
Flow Gauges
Model Stage Duty Type Feature/Type Kit/Outfit Usage
ESS3-FG Single Stage Medium Duty Cylinder Flow Gauge -
New
AF 250 / CF 253 Single Stage Medium Duty Cylinder Flow Gauge -
AF 150 / CF 153 Single Stage Light Duty Cylinder Flow Gauge -
Flow Meters
Model Stage Duty Type Feature/Type Kit/Outfit Usage
DFM (Dual) Single Stage Medium Duty Cylinder Flow Meter -
SR 310/311 Cylinder Flow Meter
SR 312 Single Stage Medium Duty Cylinder Flow Gauge -
(High Flow CO2) (100SCFH) Pressure Gauges
Pipeline Regulators
Model Stage Duty Type Feature/Type Kit/Outfit Usage
S 700 - Extra Heavy Duty Station Regulator -
L 700 - Extra Heavy Duty Line Regulator -
S 350 - -EDIUM(EAVY $UTY Station Regulator -
L 350 - -EDIUM(EAVY $UTY Line Regulator -
S 250 - Light Duty Station Regulator -
L 250 - Light Duty Line Regulator -
Meco Regulators
Model Stage Duty Type Feature/Type Kit/Outfit Usage
Type “P” Single Stage Heavy Duty Cylinder Regulator -
BR3, 5 Single Stage Medium Duty Cylinder Regulator -
Reference Guide 17
Regulators
Regulator Model Identification Symbols
Regulator Model Identification Regulator Delivery Ranges
SR ...........................Single Stage A .............................2-15 PSIG
HSR .........................Single Stage with Flow Meter B .............................2-40 PSIG
VTS .........................Two Stage Design C .............................4-80 PSIG
HVTS .......................Two Stage with Flow Meter D .............................5-125 PSIG
AR ...........................Air Relieving E..............................10-200 PSIG
S .............................Station F..............................50-750 PSIG
L..............................Line G .............................100-1500 PSIG
HRF .........................Single Stage with Internal Flow Meter J..............................200-3000 PSIG
AF ...........................Argon Flow Gauge K .............................300-4500 PSIG
CF ...........................CO2 Flow Gauge Outlet pressure delivery ranges are not minimum or
DL ...........................Dome Loaded maximum outlet pressure limits. Regulators can be
adjusted to zero PSIG outlet pressure and generally, to
BSL .........................Bulk System Line
pressures in excess of those specified. The use of these
VGS .........................Gaugeless Regulator Single Stage regulators to control pressures outside of the specified
DFM ........................Dual Flow Meter ranges is not recommended.
LC ...........................Liquid Cylinder
VGT .........................Victor Gaugeless Two Stage
18 General Information
Regulators
Model Numbering Explanation
Max. Delivery CGA
New Model No. Series Type Capacity Pressure Connection
General Information 19
Regulators
How to read the Flow Data Charts on the following pages:
The regulator flow data is provided to assist in determining Example
the proper regulator for the required application. The data An SR 450D with an inlet of 2000 PSIG and an internal
is given for reference purpose only. If additional information pressure setting of 125 PSIG (no flow) will flow 1000 SCFH, but
is necessary contact your local distributor or the Customer the delivery pressure will drop to 115 lb. As the flow increased
Service Department at: to 2000 SCFH, the pressure will drop to 108 PSIG.
Phone: 1-800-426-1888 With an inlet pressure of 200 PSIG and an initial setting of 125
The regulator flow data was established by connecting a valve PSIG, the regulator will flow 1000 SCFH with a pressure drop
to the regulator outlet. The valve was opened and the flow to 98 PSIG. At 2000 SCFH flow, the pressure will drop to 78
rates measured. The amount of pressure drop is shown on the PSIG. If a delivery pressure other than the ones shown on the
curves as the flow increases. flow charts is required, use an average curve rate between the
upper and lower pressures shown.
Acetylene 1.05
Argon 0.85
Carbon Dioxide 0.81
Helium 2.69
Hydrogen 3.79
Natural Gas 1.28
Nitrogen 1.02
Oxygen 0.95
Propane 0.80
160
140
125
120
100
80
60
40
40
15 20
S 700/Line Regulator - Extra Heavy Duty L 700/Line Regulator - Extra Heavy Duty
Regulators
SR 700 Series
s %XTRA HEAVY DUTY
s (IGH mOW RATE 5P TO 3#&(
s 3INGLE STAGE DESIGN
s -ANIFOLD MODELS AVAILABLE 3EE MANIFOLDS SECTION
Dimensions: ........... 7 X ( X $
(165.1mm x 200.2mm x 177.8mm)
Weight: ...................7 lb. 10 oz. (3.46kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM STAINLESS STEEL
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED TO
protect downstream equipment (no relief valve is
needed on SR 710 and SR 711 Series regulators).
s 3INTERED INLET lLTER BRONZE
PERFORMANCE
Maximum inlet .........3000 PSIG
Delivery range .........see chart
SR 700 A 540
Delivery Range
Gas Service Model No. (PSIG) Part No.
SR 700 D-540 5-125 0780-0727
SR 700 D-580 5-125 0780-0728
Air, Oxygen,
SR 700 E-346 10-200 0780-0742
Inert Gas
SR 700 E-540 10-200 0780-0739
SR 700 E-580 10-200 0780-0743
Methane,
SR 702 E-350 10-200 0780-0767
Hydrogen
Single Stage 25
Regulators 6ICTOR 0ROFESSIONAL s Extra Heavy Duty
ESS4 Series
s (EAVY DUTY
s (IGH CAPACITY
s 3INGLE 3TAGE $ESIGN
200 800
40 40 00
0 0
Dimensions: ........... 7 X ( X $
kPa psi CLASS
40
20
100 0
500
60
kPa
12 0
psi=pounds per
150 0
kPa= kilopascal in.
600
psi
psi=pounds per sq. in.
80
0
kPa=kilopascal
0 kPa 14 0 0 0
200 0
100
kPa
psi
psi 250 0
IV
120
sq.
20
Weight: ...................4.0 lb. (1.81kg)
800
40
300 0
0
140
180
350 0
00
160
14
0
28
0
20
00
10 0 00
12 00
0
0
0
240 00
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY
s :INC !LUMINUM HOUSING CAP
s (IGH IMPACT !"3 GAUGE GUARD
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED TO
protect downstream equipment (no relief valve is
needed on low pressure fuel gas models).
s 3INTERED INLET lLTER NICKEL PLATED BRONZE
s 3,!-© IMPACT ABSORBING SAFETY KNOB
s -EETS OR EXCEEDS #'! % 5, AND !34-
G-175 Promoted Ignition Test
PERFORMANCE
SAMPLE ORDERING INFORMATION Maximum inlet .........3000 PSIG
Delivery range .........see chart
Delivery Range CGA Inlet
Model No. (psi) Connection
26 Single Stage
6ICTOR 0ROFESSIONAL s Heavy Duty
Regulators
00
12000 kPa
16
00
0
SR 450 Series
80 1500 2p0s0i 0
150 2500 s (EAVY DUTY
kPa 1000 USE N
20000
10
0 O
s -EDIUM TO HIGH CAPACITY
4000
20 500 3000
15
ps
i
25
psi=
pou
kPa=k s p e r s q 3500
nd s 3INGLE STAGE DESIGN
ilopa .in.
O scal
s -ANIFOLD MODELS AVAILABLE 3EE MANIFOLDS SECTION
00
EN . psi
10 US
in 4000
240
q. kPa UL
200
rs
p e al
30
psi
ds sc
o u n opa
il ps
i
kP
a kPa Dimensions: ........... 7 X ( X $
50
i = p =k
p s kPa 00
5 UL 280
ps
i (184.2mm x 177.8mm x 130.3mm)
a
kP
Weight: ...................5 lb. 2 oz. (2.32kg)
The shape of the SR 450 Series regulator is a registered
trademark of Victor.
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM STAINLESS STEEL
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED TO
protect downstream equipment (no relief valve is
needed on SR 460 and SR 461 Series regulators).
s 3INTERED INLET lLTER BRONZE
SAMPLE ORDERING INFORMATION
PERFORMANCE
CGA Inlet
Maximum inlet .........3000 PSIG
Model No. Delivery Range Connection
Delivery range .........see chart
SR 450 D 540
Delivery Range
Gas Service Model No. (PSIG) Part No.
SR 450A-540 2-15 0781-0503
SR 450A-580 2-15 0781-0504
SR 450B-540 2-40 0781-0515
SR 450B-580 2-40 0781-0516
Air, Oxygen,
SR 450D-540 5-125 0781-0527
Inert Gas
SR 450D-580 5-125 0781-0528
SR 450D-346 5-125 0781-0532
SR 450E-540 10-200 0781-0539
SR 450E-580 10-200 0781-0543
SR 460A-300 2-15 0781-0583
Acetylene
SR 460A-510 2-15 0781-0584
Single Stage 27
Regulators 6ICTOR 0ROFESSIONAL s Medium Duty
ESS3 Series
s -EDIUM CAPACITY
s 3INGLE STAGE DESIGN
20 0 40
0 40 00 800
0
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY
kPa psi CLASS
40
20
100 0
500
60
kPa
12 0
psi=pounds per
150 0
kPa= kilopascal in.
psi
600
0 0 kPa 0 0 0
s :INC !LUMINUM HOUSING CAP
kPa=kilopascal
200 0
100
kPa
psi
psi 250 0
IV
14
120
sq.
800
40
300 0
0 140
180
350 0
00
160
14
28
0
20
00
10 0 00
12 00
0
0
0
24 00 0
PERFORMANCE
Maximum inlet .........3000 PSIG
Delivery range .........see chart
28 Single Stage
6ICTOR 0ROFESSIONAL s Medium Duty
Regulators
SR 350 Series
s -EDIUM DUTY
s !PPLICATIONS RANGING FROM SEVERE TO MODERATE CONDITIONS
s 3INGLE STAGE DESIGN
Dimensions: ........... 7 X ( X $
(190.5mm x 165.1mm x 114.3mm)
Weight: ...................3 lb. 8 oz. (1.59kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED
to protect downstream equipment (no relief valve
is needed on SR 360 Series regulators).
s 3INTERED INLET lLTER BRONZE
PERFORMANCE
SAMPLE ORDERING INFORMATION Maximum inlet .........3000 PSIG
Delivery range .........see chart
CGA Inlet
Model No. Delivery Range Connection
SR 350 D 540
Delivery Range
Gas Service Model No. (PSIG) Part No.
Single Stage 29
Regulators 6ICTOR 0ROFESSIONAL s Medium Duty
SR 250 Series
s -EDIUM DUTY
s )DEAL FOR WELDING AND CUTTING APPLICATIONS
s 3INGLE STAGE DESIGN
Dimensions: .......... 7 X ( X $
(162.0mm x 130.3mm x 108.0mm)
Weight: .................. 2 lb. 15 oz. (1.33kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED TO
protect downstream equipment (no relief valve is
needed on SR 260 and SR 261 Series regulators).
s 3INTERED INLET lLTER BRONZE
SAMPLE ORDERING INFORMATION
PERFORMANCE
CGA Inlet Maximum inlet .........3000 PSIG
Model No. Delivery Range Connection Delivery range .........see chart
SR 250 A 540 Regulators will deliver at least the stated upper range
at no flow and in some cases may exceed the stated
upper range.
Delivery Range
Gas Service Model No. (PSIG) Part No.
SR 250A-540 2-15 0781-0003
SR 250A-580 2-15 0781-0004
SR 250B-580 2-40 0781-0016
Air,
SR 250C-346 4-80 0781-0002
Oxygen,
SR 250C-540 4-80 0781-0027
Inert Gas
SR 250C-590 4-80 0781-0029
SR 250D-346 5-125 0781-0010
SR 250D-540 5-125 0781-0043
SR 252A-350 2-15 0781-0056
Methane, SR 252B-350 2-40 0781-0059
Hydrogen SR 252C-350 4-80 0781-0065
SR 252D-350 5-125 0781-0068
SR 253B-320 2-40 0781-0075 Part No.
CO2 SR 253C-320 4-80 0781-0077 1429-0068 Steel Gauge Guard Green-Oxygen
SR 253D-320 5-125 0781-0079 1429-0069 Steel Gauge Guard Red-Acetylene
30 Single Stage
6ICTOR 0ROFESSIONAL s Extra Heavy Duty
Regulators
VTS 700 Series
s %XTRA HEAVY DUTY
s !PPLICATIONS REQUIRING PRECISE AND
constant outlet pressure
s (IGH mOW RATE UP TO 3#&(
s 4WO STAGE DESIGN
s -ANIFOLD MODELS AVAILABLE 3EE MANIFOLD SECTION
Dimensions: .......... 7 X ( X $
(171.5mm x 190.5mm x 219.1mm)
Weight: .................. 8 lb. 8 oz. (3.86kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s $IAPHRAGMS MM AND
(82.6mm) - stainless steel
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED
to protect downstream equipment (no relief valve
is needed on VTS 710 Series regulators).
SAMPLE ORDERING INFORMATION s 3INTERED INLET lLTER
CGA Inlet PERFORMANCE
Model No. Delivery Range Connection Maximum inlet .........3000 PSIG
Delivery range .........see chart
VTS 700 D 540
Delivery Range
Gas Service Model No. (PSIG) Part No.
VTS 700 D-580 5-125 0780-0928
Oxygen,
VTS 700 E-540 10-200 0780-0939
Inert Gas
VTS 700 E-580 10-200 0780-0943
Two Stage 31
Regulators 6ICTOR 0ROFESSIONAL s Heavy Duty
N3D
VTS 450 Series
SVL
86(12
s (EAVY DUTY
s -EDIUM TO HIGH CAPACITY
L Q
SVL SRXQGVSHUVT
N3D NLORSDVFDO
N3D
SVL
UL SVL
N3D
s !PPLICATIONS REQUIRING PRECISE AND
constant outlet pressure
86(1
s 4WO STAGE DESIGN
N3D
S V L
S V L N3D NLOR U L S N3D
s -ANIFOLD MODELS AVAILABLE 3EE MANIFOLD SECTION
N3D
2
SR
SV
XQ
L
GV
S H DO
SD
U V
VF
Dimensions: ........... 7 X ( X $
T L
Q
V L
(203.2mm x 203.2mm x 187.5mm)
Weight: ...................7 lb. 6 oz. (3.35kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s $IAPHRAGM MM AND MM
stainless steel
SAMPLE ORDERING INFORMATION s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED TO
CGA Inlet protect downstream equipment (no relief valve is
Model No. Delivery Range Connection needed on VTS 460 and VTS 461 Series regulators).
s 3INTERED INLET lLTER BRONZE
VTS 450 D 540 PERFORMANCE
Maximum inlet .........3000 PSIG
Delivery Range Delivery range .........see chart
Gas Service Model No. (PSIG) Part No.
Regulators will deliver at least the stated upper range and
VTS 450 A-580 2-15 0781-3907 in some cases may exceed the stated upper range.
VTS 450 A-580 2-15 0781-6030
VTS 450 B-540 2-40 0781-3904
VTS 450 B-580 2-40 0781-3908
VTS 450 -540 5-80 0781-3406*
Air, Oxygen, VTS 450 D-346 5-125 0781-4013
Inert Gas VTS 450 D-540 5-125 0781-3905
VTS 450 D-580 5-125 0781-3909
VTS 450 D-590 5-125 0781-3916
VTS 450 E-346 10-200 0781-4014
VTS 450 E-540 10-200 0781-3906
VTS 450 E-580 10-200 0781-3913
VTS 452 B-350 2-40 0781-3959
Methane,
VTS 452 D-350 5-125 0781-3963
Hydrogen
VTS 452 E-350 10-200 0781-3964
CO2 & N2O VTS 453 D-320 5-125 0781-3974
Part No.
VTS 460 A-300 2-15 0781-3983 1429-0056 Steel Gauge Guard Green-Oxygen
Acetylene
VTS 460 A-510 2-15 0781-3984 1429-0057 Steel Gauge Guard Red-Acetylene
VTS 461 B-510 2-40 0781-3993
L.P. Gas
VTS 461 D-510 5-125 0781-3994
Nitrous Oxide VTS 453 D-326 5-125 0781-1609
Delivery Range Key *with CGA 022 outlet
A 2-15 PSIG B 2-40 PSIG
D 5-125 PSIG E 10-200 PSIG
Outlet Connections: Cylinder Type
-
2(&
,(&
32 Two Stage
6ICTOR 0ROFESSIONAL s Medium Duty
Regulators
VTS 250 Series
s -EDIUM DUTY GAS SERVICE
s !PPLICATIONS REQUIRING PRECISE AND
constant outlet pressure
s )DEAL FOR SOME LABORATORY APPLICATIONS
s 4WO STAGE DESIGN
Dimensions: ........... 7 X ( X $
(165.1mm x 143.0mm x 155.7mm)
Weight: ...................4 lb. 10 oz. (2.10kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s $IAPHRAGM MM AND
MM FABRIC REINFORCED NEOPRENE
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED
to protect downstream equipment (no relief valve
is needed on VTS 260 Series regulators).
s 3INTERED INLET lLTER BRONZE
Delivery Range
Gas Service Model No. (PSIG) Part No.
VTS 250A-540 2-15 0781-3503
VTS 250A-580 2-15 0781-3507
VTS 250B-540 2-40 0781-3504
VTS 250B-580 2-40 0781-3508
Air,
VTS 250C-346 4-80 0781-3510
Oxygen,
VTS 250C-540 4-80 0781-3505
Inert Gas
VTS 250C-580 4-80 0781-3509
VTS 250D-346 5-125 0781-3512
VTS 250D-540 5-125 0781-3506
VTS 250D-580 5-125 0781-3513 Part No.
VTS 252A-350 2-15 0781-3558 1429-0068 Steel Gauge Guard Green-Oxygen
VTS 252B-350 2-40 0781-3559 1429-0069 Steel Gauge Guard Red-Acetylene
Hydrogen
VTS 252C-350 4-80 0781-3563
VTS 252D-350 5-125 0781-3564
Delivery Range Key
VTS 253A-320 2-15 0781-3569
A 2-15 PSIG B 2-40 PSIG
VTS 253B-320 2-40 0781-3573
CO2 C 4-80 PSIG D 5-125 PSIG
VTS 253C-320 4-80 0781-3574
Regulators will deliver at least the stated upper
VTS 253D-320 5-125 0781-3575
range at and in some cases may exceed the stated
VTS 260A-300 2-15 0781-3583 upper range.
Acetylene
VTS 260A-510 2-15 0781-3584 Outlet Connections: Cylinder Type
VTS 261B-510 2-40 0781-3594 -
L.P. Gas
VTS 261BL-555 2-40 0781-3525 2(&
,(&
Two Stage 33
Regulators 6ICTOR 0ROFESSIONAL s Heavy / Medium Duty
VGS 450
s 6'3 DELIVERY PRESSURE SET BY ADJUSTING KEY THAT
moves internal indicator through slot in housing
cap to inscribed pressure lines in housing cap
Dimensions: .......... 7 X ( X $
(155.7mm x 133.4mm x 162.1mm)
Weight: .................. 4 lb. 14 oz. (2.21kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM STAINLESS STEEL
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED
SAMPLE ORDERING INFORMATION to protect downstream equipment.
s 3INTERED INLET lLTER BRONZE
CGA Inlet
Model No. Connection VGS 350
s 6'3 DELIVERY PRESSURE SET BY ADJUSTING KNOB
VGS 350 540 to inscribed pressure lines in housing cap
Dimensions: ........... 7 X ( X $
(139.7mm x 108.0mm x 127.0mm)
Delivery Range Weight: ...................3 lb. 3 oz. (1.45kg)
Gas Service Model No. (PSIG) Part No.
Oxygen VGS 450-540 5-80 0781-3403
DESIGN/CONSTRUCTION
Acetylene VGS 460-300 2-15 0781-3404 s &ORGED BRASS BODY HOUSING CAP
Acetylene VGS 460-510 2-15 0781-3405 s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
Oxygen VGS 350-540 5-80 0781-3421 s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
Acetylene VGS 360-300 2-15 0781-3423 s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED
Acetylene VGS 360-510 2-15 0781-3422 to protect downstream equipment.
L.P. Gas VGS 361-510 2-40 0781-3424 s 3INTERED INLET lLTER BRONZE
Delivery Range Key
VGS 350 Model 5-80 PSIG
PERFORMANCE
VGS 360 Model 2-15 PSIG Maximum inlet .........3000 PSIG
VGS 361 Model 2-40 PSIG Delivery range .........see chart
VGS 450 Model 5-80 PSIG
VGS 460 Model 2-15 PSIG
Outlet Connections: -
Regulators
ESS3-FG Series
s -EDIUM CAPACITY
s 3INGLE STAGE DESIGN
5
10 800
Dimensions: ........... 7 X ( X $
40 00 0
L /m
TIG
(167.6mm x 111.8mm x 91.4mm)
in.
100 0
L/min.
500
10
20
kPa
12 0
CF
150 0
H
psi
ARGON–CO2
CFH
0
kPa=kilopascal
CLASS V
032" ORIFICE
0 kPa 14 0 0 0
200 0
30
15
psi 250 0
40
MI
40
50
CF
300 0
H
350 0
00
L /m
DESIGN/CONSTRUCTION
in.
25
28
20 20
00
00
0
0
240 00
SLR 100
s 3URGE LIMITING REGULATOR
s 2EDUCES GAS SURGE AT THE APPLICATION OF THE TORCHGUN
s 0ROVIDES A MORE CONSISTENT mOW RATE OF
shielding gas to welding machines
DESIGN/CONSTRUCTION
s !LL BRASS CONSTRUCTION
s .EOPRENE DIAPHRAGM
s MICRON SINTERED BRONZE INTERNAL lLTER
PERFORMANCE
s 2ECOMMENDED INLET PRESSURE ¢ 03)' MAX
s &LOW 3#&( PRESET
s #ONNECTIONS #'!
CGA Inlet
Gas Service Model No. Part No. Connection
Inert SLR 100 0781-1197 030
Connections: )NLET 2(&
/UTLET 2(-
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
s )NTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED
to protect downstream equipment.
SAMPLE ORDERING INFORMATION s 3INTERED INLET lLTER BRONZE
s /UTLET CONNECTION
Model No. CGA Inlet Connection If flow is shut off or restricted downstream of the
regulator, the flow gauge will show indicated flow even
AF 250 580 though there is none.
WARNING: High gas withdrawal rates may cause
regulator to freeze up and will require cylinder
Gas Flow Range CGA Inlet manifolding. Consult your gas supplier.
Service Model No. Part No. (SCFH) Connection
A regulator equipped with a flow gauge is not accurate
Argon AF 250-580 0781-0350 10-40 580 when a back pressure in excess of 2 PSIG exists at
CO2 CF 253-320 0781-0351 7-35 320 the outlet. Back pressure is caused by a restriction
in the equipment downstream of the flow gauge.
Outlet Connection: 2(& #'!
Metering valves, kinked hoses or even very long hoses are
restrictions that can cause back pressure. In applications
where back pressure in excess of 2 PSIG can be expected,
a regulator equipped with a flow meter should be used.
Gas Heaters: See Chart, single stage, manufactured
for either Carbon Dioxide (CO2) or Nitrous Oxide (N2O).
Gas Heaters
Manufactured for either Carbon Dioxide (CO2) or Nitrous
Oxide (N2O). These heaters operate on 110 Volts at 120
Watts and 1 Amp. They are thermostatically controlled
AT ª& ª AND RATED FOR mOWS UP TO 3#&(
Rated for standard cylinder pressures up to 3000 PSI.
Regulators
HRF 2400 Series
s -EDIUM DUTY
s 2EGULATOR mOW METER COMBINATION IN ONE COMPACT UNIT
-50
s -)' 4)' APPLICATIONS
-45
-40
s )DEAL FOR ALL APPLICATIONS WHERE DEPENDABILITY IS NEEDED
-35
s #ALIBRATED TUBE AT 03)' NOT ON (2&
-30 Dimensions: ........... 7 X ( X $
-25 (143.0mm x 209.6mm x 76.2mm)
-20 Weight: ...................2 lb. 8 oz. (1.13kg)
-15
-10 DESIGN/CONSTRUCTION
-5 s -ACHINED BRASS BODY HOUSING CAP
s "ACK PRESSURE COMPENSATED
s &ABRIC REINFORCED NEOPRENE DIAPHRAGM
s )NTERNAL SELF RESEATING RELIEF .OT DESIGNED
1200
0 160
00 to protect downstream equipment.
20
2500
00
800
1500
0
1000 3000
3500
4000
500
UL 4000
0
kPs kPs
00
28
USE NO OIL
PERFORMANCE
Maximum inlet .........3000 PSIG
Outlet pressure ........preset
HRF 2425 ................25 PSIG
HRF 2480 ................80 PSIG
Flow capacity ..........see chart
SAMPLE ORDERING INFORMATION
Model No. CGA Inlet Connection
Flow Meter 37
Regulators 6ICTOR 0ROFESSIONAL s Medium Duty
DESIGN/CONSTRUCTION
s "RASS BODY
s 4EmON SEAT MECHANISM
s 3INTERED INLET lLTER BRONZE
s -USIC WIRE SPRING
s 0ISTON BRASS
s "ALL mOW METER VERSION ALUMINUM
s #OVER TUBE LEXAN
Flow meter shows actual flow.
38 Flow Meter
6ICTOR 0ROFESSIONAL s Medium Duty
Regulators
SR 310, SR 311 &
SR 312 Series
SR 310 s $ESIGNED FOR #/2 application
(non-siphoned tube cylinders)
s (IGH mOW #/2 applications (SR 310 100 PSIG) (SR
3#&( WITH ADEQUATE SUPPLY OR SOURCE
s $ESIGNED FOR CORE WIRE APPLICATIONS
Dimensions: ........... 7 X ( X $
(212.9mm x 184.2mm x 63.5mm)
Weight: ...................2 lb. 15 oz. (1.33kg)
DESIGN/CONSTRUCTION
s -ACHINED ALUMINUM BODY HOUSING CAP
s MM GAUGE
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s 3ELF RESEATING RELIEF VALVE NOT DESIGNED
SR 311 to protect downstream equipment)
s 3INTERED INLET lLTER BRONZE
PERFORMANCE
Maximum inlet .........1500 PSIG
Delivery range .........100 SCFH
High gas withdrawal rates may cause regulator freeze up
and will require cylinder manifolding. Consult your gas
supplier. See page 36, for Gas Heater.
A regulator equipped with a flow gauge is not accurate
when a back pressure in excess of 2 PSIG exists at the
outlet. Back pressure is caused by a restriction in the
equipment downstream of the flow gauge. Metering
valves, kinked hoses or even very long hoses are
restrictions that can cause back pressure. In applications
SR 312 where back pressure in excess of 2 PSIG can be expected,
a regulator equipped with a flow meter should be used.
Flow Meter 39
Regulators 6ICTOR 0ROFESSIONAL s Medium Duty
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM HIGH PRESSURE GAUGE
s 3TEM TYPE SEAT MECHANISM
s &ABRIC REINFORCED NEOPRENE DIAPHRAGM
s %XTERNAL SELF RESEATING RELIEF VALVE .OT DESIGNED
to protect downstream equipment
s 3INTERED INLET lLTER BRONZE
HVTS Series
PERFORMANCE
Maximum inlet ...................3000 PSIG
Outlet pressure ..................25 PSIG (preset)
SAMPLE ORDERING INFORMATION Flow capacity ....................see chart
WARNING: High gas withdrawal rates on carbon dioxide may require cylinder manifolding. Consult your gas supplier.
40 Flow Meter
6ICTOR 0ROFESSIONAL s Medium Duty
Regulators
LC 350DR Series
s -EDIUM DUTY
s )DEALLY SUITED FOR FULL RANGE CONTROL OF VAPORIZED GAS
s 6APOR SIDE OF LIQUID VESSEL
s )DEALLY SUITED TO REPLACE CYLINDER REGULATOR
often used on liquid vessel
s (IGH mOW RATES WITH PROPER SIZING OF SUPPLY
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM DIAMETER GAUGE BRASS
s 3TEM TYPE SEAT MECHANISM FABRIC REINFORCED NEOPRENE
s MM DIAPHRAGM STAINLESS STEEL
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENT
s %XTERNAL PRESSURE RELIEF VALVE ON
high pressure side (500 PSI)
s $ESIGNED FOR VAPOR SIDE APPLICATION ON LIQUID VESSEL
s )NLET lLTER STAINLESS STEEL
PERFORMANCE
Maximum inlet .........500 PSIG
Delivery range .........5-325 PSIG
WARNING: Safety feature, not designed for
SAMPLE ORDERING INFORMATION high pressure cylinder use. Relief will activate
if connected to high pressure cylinder.
Model No. Delivery Range CGA Inlet Connection
LC 350 DR 540
Delivery Range
Gas Service Model No. (PSIG) Part No.
Liquid Cylinder 41
Regulators 6ICTOR 0ROFESSIONAL s Heavy Duty
SR 4 Series
s (EAVY DUTY
s (IGH PRESSURE
s )DEALLY SUITED FOR PRESSURE VESSEL TESTING
s $EAD END TESTING
s $ELIVERY PRESSURES UP TO 03)' ON SOME MODELS
s -AY BE PANEL MOUNTED
s 3INGLE STAGE DESIGN
Dimensions: ........... 7 X ( X $
(152.4mm x 165.1mm x 158.8mm)
Weight: ...................4 lb. (1.81kg)
42 High Pressure
6ICTOR 0ROFESSIONAL s Heavy Duty
Regulators
SR 600 Series
s (EAVY DUTY
s $ESIGNED FOR PRESSURE TESTING
s )DEAL WHERE OR 03)' MAXIMUM
delivery pressures are needed
s $EAD END TESTING
s 3INGLE STAGE DESIGN
Dimensions: ........... 7 X ( X $
(190.5mm x 152.4mm x 127.0mm)
Weight: ...................5 lb. 7 oz. (2.47kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES BRASS LB HIGH
pressure, 600 lb. and 1000 lb. low pressure)
s #ARTRIDGE TYPE SEAT ASSEMBLY WITH 0#4&% SEAT
s $IAPHRAGM STAINLESS STEEL
s %XTERNAL SELF RESEATING RELIEF VALVE
s #'! HAVE A MAXIMUM
inlet pressure of 3000 PSIG
High
Pressure SR 600-350-680 5-350 0781-1604
Inert Gas
High
Pressure SR 600-350-347 5-350 0781-1605
Air
High Pressure 43
Regulators 6ICTOR 0ROFESSIONAL s Heavy Duty
44 Manifold
6ICTOR 0ROFESSIONAL s Extra Heavy Duty
Regulators
S 700 Series
s %XTRA HEAVY DUTY
s $ESIGNED FOR GAS DISTRIBUTION SYSTEM PIPELINE
s !VAILABLE FOR A WIDE RANGE OF GAS SERVICES
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGE BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
WARNING: The S 700 Series regulators have a maximum
inlet pressure of 350 PSIG. Not for use on cylinders.
S 700 D 996
Delivery Range
Gas Service Model No. (PSIG) Part No.
Oxygen,
Inert Gas, S 700D-996 5-125 0780-1273
CO2
Delivery Range Key:
A 2-15 PSIG B 20-40 PSIG
C 4-80 PSIG D 5-125 PSIG CSR
Inlet Connection: .03&
Outlet Connections: h#v -
0IPELINE s 3TATION 45
Regulators 6ICTOR 0ROFESSIONAL s Heavy / Medium Duty
S 350 Series
s -EDIUM TO HEAVY DUTY
s 'AS DISTRIBUTION SYSTEMS PIPELINE
s 7IDE RANGE OF DELIVERY PRESSURES AVAILABLE
s -ATCHED TO THE #'! INLET CONNECTION FOR SPECIlC GAS
service and valve (See connection key on chart)
DIMENSIONS: ...... side inlet: 7 X ( X $
(139.7mm x 165.1mm x 127.0mm)
rear inlet: 7 X ( X $
(76.2mm x 165.1mm x 177.8mm)
WEIGHT: ...............3 lb. 5 oz. (1.50kg)
DESIGN/CONSTRUCTION
s &ORGED BODY HOUSING CAP
s MM GAUGE BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
WARNING: The S 350 Series regulators have a maximum
inlet pressure of 200 PSIG. Not for use on cylinders.
CS 350
SAMPLE ORDERING INFORMATION
CGA Inlet
Model No. Delivery Range Connection
S 350 D 024
Delivery Range
Gas Service Model No. (PSIG) Part No.
SIDE INLET
S 350C-024 4-80 0781-2492
Connections Key:
S 350D-024 5-125 0781-2493
024: OXYGEN
Oxygen REAR INLET
S 350BR-024 2-40 0781-2458 CGA Inlet Connection: 2(&
S 350CR-024 4-80 0781-2459 Outlet Connection: h"v 2(-
S 350CR-024 4-80 0781-2460 025: FUEL GAS
*CS 350DR-024 5-125 0781-2509
CGA Inlet Connection: ,(&
Inert Gas, REAR INLET Outlet Connection: h"v ,(-
CO2 S 350DR-034 5-125 0781-2465
034: INERT GAS
SIDE INLET CGA Inlet Connection: 2(-
Acetylene
S 360A-025 2-15 0781-2500
Outlet Connection: &
Hydrogen, S 361C-025 4-80 0781-2505 Delivery Range Key:
L.P. Gas S 361D-025 5-125 0781-2506 A 2-15 PSIG B 2-40 PSIG
C 4-80 PSIG D 5-125 PSIG
REAR INLET
Acetylene Regulators will deliver at least the stated upper range
S 360AR-025 2-15 0781-2472
at no flow and in some cases may exceed the stated
Hydrogen, S 361CR-025 4-80 0781-2485 upper range.
L.P. Gas S 361DR-025 5-125 0781-2486 *CS Green Gauges-Oxygen
46 0IPELINE s 3TATION
6ICTOR 0ROFESSIONAL s Light Duty
Regulators
S 250 Series
s ,IGHT DUTY APPLICATION
s $ESIGNED FOR GAS DISTRIBUTION SYSTEM PIPELINE
s !VAILABLE WITH #'! INLET
and 034 inlet connections
s 7IDE RANGE OF GAS SERVICE APPLICATIONS
DIMENSIONS: ...... 4" 7 X ( X $
(101.6mm x 152.4mm x 114.3mm)
WEIGHT: ...............2 lb. 6 oz. (1.14kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGE BRASS
s 3TEM TYPE SEAT MECHANISM
PERFORMANCE
Maximum inlet ...............................200 PSIG
Delivery ranges..............................see chart
WARNING: Maximum inlet pressure 200
PSIG. Not for use on cylinders.
S 250 A 024
Connections Key:
024: OXYGEN
Delivery Range
Gas Service Model No. (PSIG) Part No. CGA Inlet Connection: 2(&
Outlet Connection: h"v 2(-
S 250B-024 2-40 0781-1253
Oxygen S 250C-024 4-80 0781-1254 025: FUEL GAS
S 250D-024 5-125 0781-1255 CGA Inlet Connection: ,(&
Inert Gas, S 250D-034 5-125 0781-1248 Outlet Connection: h"v ,(-
CO2, S 2570-034 - 0781-1245
034: INERT GAS
N2O With Flow Meter
CGA Inlet Connection: 2(-
Acetylene S 260A-025 2-15 0781-1256 Outlet Connection: &
Delivery Range Key:
Hydrogen, S 261C-025 4-80 0781-1257 A 2-15 PSIG B 2-40 PSIG
L.P. Gas S 261D-025 5-125 0781-1258 C 4-80 PSIG D 5-125 PSIG CSR
0IPELINE s 3TATION 47
Regulators 6ICTOR 0ROFESSIONAL s Extra Heavy Duty
L 700 Series
s %XTRA HEAVY DUTY
s $ESIGNED FOR GAS DISTRIBUTION SYSTEM PIPELINE
s !VAILABLE IN EITHER .04& OR .04& INLET
DIMENSIONS: ...... 4" 7 X ( X $
(101.6mm x 177.8mm x 152.4mm)
WEIGHT: ...............4 lb. 15 oz. (2.4kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGE BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
PERFORMANCE
Maximum inlet ...............................350 PSIG
Delivery ranges..............................see chart
WARNING: Maximum inlet pressure 350
PSIG. Not for use on cylinders.
L 700 C 500
Delivery Range
Gas Service Model No. (PSIG) Part No. Inlet & Outlet Ports
L 700C-500 0780-1229 .04&
4-80
L 700C-750 0780-1220 .04&
Air, Oxygen, L 700D-500 0780-1207 .04&
Inert Gas, L 700D-500 PMT 5-125 0780-1236 .04&
CO2, N20 L 700D-750 0780-1209 .04&
L 700E-500 0780-1221 .04&
10-200
L 700E-750 0780-1222 .04&
48 0IPELINE s ,INE
6ICTOR 0ROFESSIONAL s Heavy / Medium Duty
Regulators
L 350 Series
s -EDIUM TO HEAVY DUTY
s $ESIGNED FOR GAS DISTRIBUTION SYSTEMS PIPELINE
s )NLET PORT .04&
s 7IDE RANGE OF GAS SERVICES
Dimensions: ........... 7 X ( X $
(76.2mm x 165.1mm x 127.0mm)
Weight: ...................3 lb. (1.36kg)
DESIGN/CONSTRUCTION
s &ORGED BODY HOUSING CAP
s MM GAUGE BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s $ELRIN CAP BUSHING FOR SMOOTH ADJUSTMENTS
PERFORMANCE
Maximum inlet .........350 PSIG
Delivery ranges........see chart
WARNING: Maximum inlet pressure 350
PSIG. Not for use on cylinders.
L 350 D 250
0IPELINE s ,INE 49
Regulators 6ICTOR 0ROFESSIONAL s Light Duty
L 250 Series
s ,IGHT DUTY APPLICATION
s $ESIGNED FOR GAS DISTRIBUTION SYSTEM PIPELINE
s )NLET .04&
s 7IDE RANGE OF GAS SERVICE APPLICATIONS
Dimensions: ........... 7 X ( X $
(76.2mm x 152.4mm x 114.3mm)
Weight: ...................2 lb. 6 oz. (1.14kg)
DESIGN/CONSTRUCTION
s ,IGHT DUTY APPLICATIONS
s $ESIGNED FOR GAS DISTRIBUTION SYSTEM PIPELINE
s )NLET .04&
PERFORMANCE
Maximum inlet ...............................350 PSIG
Delivery ranges..............................see chart
WARNING: Maximum inlet pressure 350
PSIG. Not for use on cylinders.
L 250 D 250
L 260A-250 0781-1296
Acetylene 2-15 0-30 .04&
L 260A-250 PMT 0781-1281
50 0IPELINE s ,INE
6ICTOR 0ROFESSIONAL s Heavy / Medium Duty
Regulators
Flow Meter
s 'AS mOW MEASUREMENT IN 3#&(
s -)' 4)' APPLICATIONS
s &LOWTUBE AND OUTER TUBE ARE MADE OF IMPACT
resistant lexan for severe applications
s 0RESSURE COMPENSATED FOR LOW SURGE REQUIREMENT
s #OVER TUBE CONTAINS OVERPRESSURE PROTECTION
All Victor flow meters are back pressure compensated
to ensure accurate readings at all times, even if line
restrictions are present. All flow meters are calibrated
to operate at 25 PSIG inlet pressure to minimize surge,
except the FM 200 which is calibrated to operate at
80 PSIG.
WARNING: Not designed for cylinder use. Do
not exceed calibrated inlet pressure.
Model No. Part No. Flow Range (SCFH) Inlet Fitting Outlet Fitting Flowtube Inlet Pressure (PSIG)
UNITS WITH SINGLE GAS CALIBRATION
FM 200 1000-0264 30-100 CO2 .04- 2(& 1015-0066 80
UNITS WITH TWO GAS CALIBRATIONS
10-60 AIR
FM 150 1000-0268 .04- 2(& 1015-0060 25
10-60 NITROGEN
4-18 ARGON
FM 135 1000-0255 2(& 2(& 1015-0063 25
10-50 HELIUM
4-18 ARGON
FM 145 1000-0256 2(- 2(& 1015-0063 25
10-50 HELIUM
4-18 ARGON
FM 155 1000-0257 .04- 2(& 1015-0063 25
10-50 HELIUM
15-65 ARGON
FM 137 1000-0261 2(& 2(& 1015-0064 25
40-200 HELIUM
15-70 ARGON
FM 147 1000-0262 2(- 2(& 1015-0064 25
40-200 HELIUM
15-65 ARGON
FM 157 1000-0263 .04- 2(& 1015-0064 25
40-200 HELIUM
UNITS WITH THREE GAS CALIBRATIONS
5-40 CO2
FM 370 1000-0258 5-50 ARGON 2(& 2(& 1015-0057 25
20-150 HELIUM
5-40 CO2
FM 371 1000-0259 5-50 ARGON 2(- 2(& 1015-0057 25
20-150 HELIUM
5-40 CO2
FM 372 1000-0182 5-50 ARGON .04- 2(& 1015-0057 25
20-150 HELIUM
DL 700 Series
s (EAVY DUTY
s %XTERNALLY DOME LOADED
s 0ILOT REGULATOR OR PRESSURE REGULATOR REQUIRED
s 2EMOTELY CONTROLLED PRESSURE ADJUSTMENT
s $ESIGNED FOR CUTTING MACHINES
s $ESIGNED FOR APPLICATIONS THAT DEMAND
very consistent delivery pressures
DIMENSIONS: ......... 7 X ( X $
(95.3mm x 101.6mm x 143.0mm)
WEIGHT: ..................4 lb. 8 oz. (2.04kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s 3TEM TYPE SEAT MECHANISM FABRIC REINFORCED NEOPRENE
s .04& INLET OUTLET PORTS
PERFORMANCE
Maximum inlet .............................500 PSIG
Maximum outlet...........................125 PSIG
Temperature operating range ....... ª &
Dome load inlet size .................... .04&
Maximum dome load pressure .....125 PSIG
SAMPLE ORDERING INFORMATION WARNING: Not for use on cylinders.
Model No. Delivery Range
DL 700 D
Delivery Range
Gas Service Model No. (PSIG) Part No.
A wide range
DL 700 5-125 0780-1188
of gases
Delivery Range Key
D 5-125 PSIG
Connections: .04& )NLET /UTLET 0ORTS
Requires pilot regulator to control pressure in dome for control of
delivery pressure.
The DL 700 line regulator is externally dome loaded for remote
control of gases. The delivery pressure on the DL 700 is
controlled by the pressure supplied from a remote pilot regulator.
Regulators
BSL 700 Series
s (EAVY DUTY
s $ESIGNED FOR DOWNSTREAM VAPOR APPLICATIONS
s )DEAL FOR BULK SYSTEM INSTALLATIONS
s $URABLE AND WILL WITHSTAND MOST
environmental situations
s )NLET PRESSURE UP TO 03)'
DIMENSIONS: ......... 7 X ( X $
(82.6mm x 215.9mm x 190.5mm)
WEIGHT: ..................5 lb. 8 oz. (2.49kg)
DESIGN/CONSTRUCTION
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGE BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM STAINLESS STEEL
s "LEED VALVE IN LOW PRESSURE PORT
s .OZZLE BRASS
s 3EAT RETURN SPRING STAINLESS STEEL
s 3EALS SILICON AND NYLON
PERFORMANCE
Maximum inlet .........350 PSIG
Outlet range.............10-200 PSIG
4EMPERATURE OPERATING RANGE ª &
WARNING: Maximum inlet pressure 350
PSIG. Not for use on cylinders.
SAMPLE ORDERING
INFORMATION
Model No.
BSL 700
60
0
kPa
800
20
10
00
0
12000
kPa
RC 450 Series
100 i 1 800
140
ps
150 20 s (EAVY DUTY
16
80
160 0
0
100 U 0 p s i 0
1200
00
NO
400
USE
60
400
180 0 SE N 250
sq.i
n. 500 0 s 3INGLE STAGE DESIGN
0
O
per
40 nds
20000
al
p o u lopasc ps
psi= 200i i= p 300
20
kPa=
ki
p s kPa
ou
n d 0 s &ORGED BRASS BODY HOUSING CAP
00
UL kPa =kil s p e
20
ps s 3
sca q .i n 50
14
o r
kPa i pa
0
psi 0
kPa
UL l
400
p 0
.
s MM GAUGES
0
00
si
24
kPa
28000
s 3TEM TYPE SEAT MECHANISM
s 3TAINLESS STEEL DIAPHRAGM
Cut s -AXIMUM INLET PRESSURE 03)'
Sk
s OUTLET CONNECTION
ill s )NTERNAL RELIEF
Dimensions: ........... 7 X ( X $
(184.2mm x 177.8mm x 130.3mm)
Weight: ................... 5 lb. 2 oz. (2.32kg)
RC 350 Series
s -EDIUM TO HEAVY DUTY
s 3INGLE STAGE DESIGN
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES
s 3TEM TYPE SEAT MECHANISM
s .EOPRENE DIAPHRAGM
s -AXIMUM INLET PRESSURE 03)'
s OUTLET CONNECTION
s )NTERNAL RELIEF
Dimensions: ........... 7 X ( X $
(190.5mm x 152.4mm x 127.0mm)
Weight: ................... 3 lb. 8 oz. (1.59kg)
54 Single Stage
6ICTOR #UT3KILL s Medium Duty
Regulators
RC 250 Series
s -EDIUM DUTY
s 3INGLE STAGE DESIGN
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES
s 3TEM TYPE SEAT MECHANISM
s .EOPRENE DIAPHRAGM
s -AXIMUM INLET PRESSURE 03)'
s OUTLET CONNECTION
s )NTERNAL RELIEF
Dimensions: .......... 7 X ( X $
(162.1mm x 130.3mm x 108.0mm)
Weight: .................. 2 lb. 15 oz. (1.33kg)
Single Stage 55
Regulators 6ICTOR #TU3KILL s Light Duty
SR 5/SR 6 Series
s ,IGHT DUTY
s ,IGHT WEIGHT COMPACT
s 3INGLE STAGE DESIGN
Dimensions: .......... 7 X ( X $
(120.7mm x 108.0mm x 82.6mm)
Weight: .................. 1 lb. 12 oz. (0.79kg)
DESIGN/CONSTRUCTION
s -ACHINED BRASS BODY HOUSING CAP
s MM GAUGES BRASS
s 3TEM TYPE SEAT MECHANISM
s MM DIAPHRAGM FABRIC REINFORCED NEOPRENE
s )NTERNAL SELF RESEATING DIAPHRAGM RELIEF VALVE
(no relief valve is needed on SR 6 Series regulators).
s 3INTERED INLET lLTER BRONZE
PERFORMANCE
Maximum inlet .......................3000 PSIG
SAMPLE ORDERING INFORMATION Delivery range ........................see chart
Regulators will deliver at least the stated upper range
CGA Inlet
at no flow and in some cases may exceed the stated
Model No. Delivery Range Connection
upper range.
SR 5 60 540
Delivery Range
Gas Service Model No. (PSIG) Part No.
SR 5-40-320 2-40 0780-2544
Oxygen,
SR 5-40-580 2-40 0780-2537
CO2,
SR 5-60-540 CS 2-60 0780-2520
Inert Gas
SR 5-60-540R CS 2-60 0781-2545
SR 6-15-510 CS 2-15 0780-2521
SR 6-15-200 2-15 0780-2524
Acetylene
SR 6-15-200R CS 2-15 0781-2546
SR 7-40-510 CS 2-40 0780-2533
Delivery Range Key:
15 2-15 PSIG (A Range)
40 4-40 PSIG (B Range)
60 4-60 PSIG (C Range)
CS Clamshell Pkg.
Outlet Connections: -
&
Delivery pressure gauge only. No H.P. gauge.
56 Single Stage
6ICTOR #UT3KILL s Light Duty
Regulators
TPR 250 Series
Purging Regulator
s 3INGLE STAGE DESIGN
s &ORGED BRASS BODY HOUSING CAP
s MM GAUGES
s 3TEM TYPE SEAT MECHANISM
s .EOPRENE DIAPHRAGM
s -AXIMUM INLET PRESSURE 03)'
Dimensions: .......... 7 X ( X $ MM
x 130.3mm x 108.0mm)
Weight: .................. 2 lb. 15 oz. (1.33kg)
Delivery Pressure
Part No. Model No. (PSIG)
0781-9133 TPR 250-125-580 5-125
0781-9127 TPR 250-125-320 5-125
0781-9134 TPR 250-200-580 10-250
0781-9135 TPR 250-500-580 10-500
Outlet Connection: ª mARE
Flow Meter 57
Regulators 6ICTOR #UT3KILL s Light Duty
AF 200 Series
s 3INGLE STAGE DESIGN
8000
12 0
0 0
kP
s &ORGED BRASS BODY HOUSING CAP
a
10 15 0 2 0
s 3TEM TYPE SEAT MECHANISM
14
400
00 0 00
0
ps
50
00
i2
50
0 ps
i=
kP pou
a = nd 30
0
s !RGON !RGON#/2 mix & CO2 models
200 00
kP p kil s
op pe 00
a si as r s
40 00
BU
-2
58
1-A
M
0
280 00 24
00
s 5P TO #&( FOR !RGON AND UP TO #&( FOR #/2
s !VAILABLE IN #'! INLET CONNECTIONS
s 2(& OUTLET CONNECTION EXCEPT WHEN NOTED
s /PTIONAL -)' KIT AVAILABLE WITH g M HOSE
58 Flow Gauge
6ICTOR &IRE0OWER s Heavy / Medium Duty
Regulators
RF 350 Series
s 3INGLE STAGE DESIGN
s &ORGED BRASS BODY HOUSING CAP
(housing cap is finished in a black powder coat)
s 3TEM TYPE SEAT MECHANISM
s .EOPRENE DIAPHRAGM
s )NTERNAL RELIEF
s -AXIMUM DELIVERY PRESSURE 03)'
RF 250 Series
s 3INGLE STAGE DESIGN
s &ORGED BRASS BODY HOUSING CAP
(housing cap is finished in a black powder coat)
s 3TEM TYPE SEAT MECHANISM
s .EOPRENE DIAPHRAGM
s )NTERNAL RELIEF
s -AXIMUM DELIVERY PRESSURE 03)'
Single Stage 59
Handles and Attachments
Control Valves With Stainless Steel Ball
Model 315FC (Illustrated) Stems have TEFLON packing for smooth gas tight operation
Victor Others
60
Design & Construction Features
Victor Heavy Industry
Flashback Arrestors:
Oxygen - (Select one of the following)
Part No. Model No. Type
0657-0010 *FB-O Torch Mount
0657-0014 FB-OR Regulator Mount
Fuel - (Select one of the following)
Part No. Model No. Type
0657-0011 *FB-F Torch Mount
0657-0015 FB-FR Regulator Mount
*Torch mount models also protect the hose.
Pair Packs
Part No. Model No. Type
0656-0001 *FB-1 /XY&UEL 4ORCH -OUNT
0656-0004 FBR-1 /XY&UEL 2EGULATOR -OUNT
Handles 61
Handles and Attachments 6ICTOR 0ROFESSIONAL s Extra Heavy Duty & Heavy Duty
Part No. Model No. Description Hose Connection Gas Weight Length
0382-0316 H 315FC High Flow Torch Handle All 20 oz. MM
0382-0034 315FC “VanGuard” Heavy Duty All 18 oz. MM
0387-0008 315FC “VanGuard” Heavy Duty (Clamshell) All 18 oz. MM
62 Handles
6ICTOR 0ROFESSIONAL s Medium Duty
Part No. Model No. Description Hose Connection Gas Weight Length
0382-0032 100FC “VanGuard” Medium Duty All 14 oz. MM
0387-0011 100FC “VanGuard” Medium Duty (Clamshell) All 14 oz. MM
J-40
J-28
Part No. Model No. Description Hose Connection Gas Weight Length
0382-0006 J-40 Standard Light Duty All 5.5 oz. MM
0382-0127 J-28 Light Duty All 8.5 oz. MM
J-40 handle does not have check valves or flashback arrestors.
J-28 handle includes accessory reverse flow check valves for regulator use.
Handles 63
Handles and Attachments 6ICTOR #UT3KILL s Heavy & Medium Duty
WH 370FC-V &
WH 270FC-V
s "UILT IN RESERVE mOW CHECK VALVES
and flashback arrestors
s 4UBE WITHIN A TUBE DESIGN
WH 370FC-V
s 4HREE PIECE h9v REAR ASSEMBLY WITH
Heavy Duty
threaded connection
s HOSE CONNECTIONS
s 3TAINLESS STEEL BALL VALVES
Heavy and medium duty handles for
cutting attachments, welding tips and
heating assemblies. Each includes built in
reverse flow check valves and flashback
arrestors for added operator safety.
WH 270FC-V
Medium Duty
WH 370FC-FS &
WH 270FC-FS
s "UILT IN REVERSE mOW CHECK VALVES
and flashback arrestors
s 6ICTOR TUBE WITHIN A TUBE DESIGN
WH 370FC-FS s 4HREE PIECE h9v REAR ASSEMBLY
Heavy Duty with threaded connection
s HOSE CONNECTIONS
s 3TAINLESS STEEL BALL VALVES
WH 270FC-FS
Medium Duty
64 Handles
6ICTOR 0ROFESSIONAL s Heavy Duty
Part No. Model No. Cutting Range Tip Series Head Angle Outfits with 2460 Series
0381-0816 CA 2460 MM 1 ª Cutting Attachments:
0387-0000 CA 2460 CS MM 1 ª Journeyman
0381-0817 CA 2461 MM 1 ª Journeyman II
0381-0818 CA 2462 MM 1 ª Journeyman “Select”
0381-0823 CA 2470 MM 3 ª Contender
CS Clamshell Pkg.
CA 1350
100 SERIES
Performance matched for each torch handle series.
s $IE FORGED BRASS HEAD
s 3PIRAL MIXER BLENDS OXYGEN FUEL
s 3MOOTH CUTTING VALVE PULL TYPE
s 3TAINLESS STEEL TUBES
s "RASS COUPLING NUT DOUBLE h/v RING SEAL GIVES
quick gas-tight seal tightening with out wrench
s ,ENGTH MM 7EIGHT OZ KG
Part No. Model No. Cutting Range Tip Series Head Angle Outfits with 1350 Series
0381-0418 CA 1350 MM 3 ª Cutting Attachments:
0387-0005 CA 1350 CS MM 3 ª Performer
0381-0420 CA 1351 MM 3 ª Portable Torch Kits
0381-0421 CA 1352 MM 3 ª
CS Clamshell Pkg.
Attachments 65
Handles and Attachments 6ICTOR 0ROFESSIONAL s Light Duty
CA 1260
J SERIES
Performance matched for each torch handle series.
s $IE FORGED BRASS HEAD
s 3PIRAL MIXER BLENDS OXYGEN FUEL
s 3MOOTH CUTTING VALVE PULL TYPE
s 3TAINLESS STEEL TUBES
s "RASS COUPLING NUT DOUBLE h/v RING SEAL GIVES
quick gas-tight seal tightening without wrench
s ,ENGTH MM 7EIGHT OZ KG
Part No. Model No. Cutting Range Tip Series Head Angle
0381-0162 CA 1260 MM 3 ª
0387-0003 CA 1260 CS MM 3 ª
CS Clamshell Pkg.
66 Attachments
6ICTOR #UT3KILL s Heavy & Medium Duty
Outfits with
350-FS Series Cutting
Part No. Model No. Cutting Range Tip Series Head Angle Attachments:
0381-0744 CA 350-FS MM 1 ª FirePower 350
0381-0740 CA 250-FS MM 3 ª Outfits with
Heavy and medium duty cutting attachments for use with all fuel gases (natural gas 2 PSI and 250-FS Series Cutting
above). Proper tip required. Cutting attachment accepts Victor Professional and CutSkill Victor Attachments:
Style Tips. FirePower 250
Attachments 67
Straight Cutting Torches
Victor “Universal Torches”
They combine the spiral and injector mixer principles. The result is a high
performance torch that operates on any fuel gas.
5NIVERSAL TORCH CUTTING CAPACITY FROM MM TO MM
Die-Forged
Brass head
for maximum durability
Stainless Steel
Cutting oxygen lever
for extra durability &
operator comfort
Ribbed Brass Handle
For sure grip &
operator comfort
Built-in
Flashback
arrestors
for added safety Built-in
53 0ATENT Reverse flow
check valve
for added operator safety
Warning
Use add-on flashback arrestors
4O REDUCE THE RISK OF PERSONAL INJURY DEATH ANDOR PROPERTY DAMAGE USE SUFFICIENT
capacity flashback arrestors with all Victor Heavy Industry torch products.
Alternative fuel gas only refers to propane, natural gas, propylene gases.
Acetylene, hydrogen and gasoline are NOT included as an alternative gas.
69
Straight Cutting Torches Victor Heavy Industry
2-285N TWO PIECE TIPS - FOR USE WITH THE HC 1500C TORCHES
Cutting *Cutting Preheat Preheat
Model Cutting Orifice Oxy Cutting Oxy Oxy *Fuel Fuel
Part No. No. Size Range Dia. (PSIG) Oxy (SCFH) (PSIG) (SCFH) (PSIG) (SCFH)
0336-0041 2-285N 0.250 TO 0.250
0336-0042 2-285N 0.312 TO 0.312
0336-0043 2-285N 0.375 TO 0.375
0336-0044 2-285N 0.437 /VER 0.437
*Pressure is measured at back of torch when torch is flowing.
Oxygen Consumption: 1. Adequate volume required. Dual supplies recommended when using cylinders.
2. When operating from bulk oxygen supply it is recommended that separate oxygen drop stations are used.
70
Victor Heavy Industry
71
Straight Cutting Torches Victor Heavy Industry
HC 1200C Series
The HC 1200C Series torches are high
capacity, heavy duty cutting torches that
Flashback Arrestors:
have a cutting capacity up to 18" (45.7cm).
Oxygen: (Select one of the following) Tip Sizes These torches are used in a wide variety of
Recommended for heavy industrial applications that include
Part No. Model Type use with each Model scrapping and demolition. Straight torch
0657-0010 *FB-O Torch Mount Up to size: 8 without built-in flashback arrestors. With
reverse flow check valves.
0657-0014 FB-OR Regulator Mount Up to size: 8
s &OR USE WITH ANY FUEL GAS 03)' AND ABOVE
0657-0076 *FBHC-O 4ORCH -OUNT(IGH &LOW 10 and larger s 5NIVERSAL MIXER
0657-0078 FBHC-OR 2EGULATOR -OUNT(IGH &LOW 10 and larger s #UTTING CAPACITY CM
s 3TANDARD ,ENGTHS
Fuel: (Select one of the following) CM CM
0657-0011 *FB-F Torch Mount - s 5SES 3ERIES CUTTING TIPS
s h"v HOSE CONNECTIONS
0657-0015 FB-FR Regulator Mount -
s %XTRA LENGTH MODELS AVAILABLE UPON REQUEST
*Torch mount models also protect the hose s ,OCK DOWN LEVER KIT AVAILABLE
Hoses: (Contact local distributor for hose information.) part number 0307-0062
Oxygen: MM )$ WITH h"v HOSE ,( CONNECTIONS WARNING:
Use T-grade hose. s 5SE ADD ON mASHBACK ARRESTORS
s !LTHOUGH BUILT TO 6ICTORS QUALITY AND SAFETY
Fuel: MM )$ WITH h"v HOSE ,( CONNECTIONS standards, due to the cutting capacity
Use T-grade hose. ANDOR DESIGN OF EACH TORCH mASHBACK
Regulators: arrestors are not manufactured into
these Victor heavy industry torches.
Oxygen: SR 450D- 540 Cylinder, SR 700D-540 cylinder
s 4O REDUCE THE RISK OF PERSONAL INJURY DEATH
OR , $% LINE SUPPLY
ANDOR PROPERTY DAMAGE USE SUFlCIENT
Fuel: 32 $ CYLINDER 32 "#$ capacity flashback arrestors with all
, "#$ LINE SUPPLY Victor heavy industry torch products.
s !LTERNATIVE FUEL GAS ONLY REFERS TO
propane, natural gas, propylene gases.
Torch Head Acetylene, hydrogen and gasoline are
Part No. Model No. Angle Length NOT included as an alternative gas.
72
Victor Heavy Industry
73
Straight Cutting Torches Victor Heavy Industry
Flashback Arrestors:
Oxygen: (Select one of the following) Tip Sizes
TM
Recommended
for use with each
Bulldog - HC 1100C
Part No. Model Type Model With Bulldog torches, superior performance
and productivity are assured. The low profile
0657-0010 *FB-O Torch Mount Up to size: 8 head and lightweight design, strength and
0657-0014 FB-OR Regulator Mount Up to size: 8 durability put Bulldog in a class by itself.
0657-0076 *FBHC-O 4ORCH -OUNT(IGH &LOW Size: 10 and larger Straight torch without built-in flashback
arrestors, with reverse flow check valves. For
0657-0078 FBHC-OR 2EGULATOR -OUNT(IGH &LOW Size: 10 and larger
use with propane & pressurized natural gas
Fuel: (Select one of the following) ONLY.
0657-0011 *FB-F Torch Mount - s 0ATENTED HEAD AND MIXER
s "OTTOM REAR LEVER WITH PINCLIP DESIGN
0657-0015 FB-FR Regulator Mount -
s 3PECIALLY DESIGNED @SUPERCHARGED
*Torch mount models also protect the hose preheat oxygen valve
Hoses: (Contact local distributor for hose information.) s 2EDUCES mAME BLOW OFF
s "OTTOM LOCATED VALVES FOR
Oxygen: MM )$ WITH h"v HOSE ,( CONNECTIONS right or left hand use
Use T-grade hose.
s 4HREADED INLET CONNECTIONS WITH INTEGRAL
Fuel: MM )$ WITH h"v HOSE ,( CONNECTIONS check valve for ease of repair
Use T-grade hose. s "ODY DESIGNED FOR HIGH mOW APPLICATIONS
Regulators: s HEAVY DUTY TUBE SUPPORTS FOR
ultra strength and durability
Oxygen: SR 450D-540, SR 700D-540 cylinder, SR 700E-540 cylinder or s 5LTRA-IX LOW PRESSURE MIXER
, $% LINE SUPPLY ,# $2 LIQUID CYLINDER specially designed for LP gas
Fuel: 32 $ CYLINDER 32 "#$ s 3LEEK LOW PROlLE HEAD WITH NO
, "#$ LINE SUPPLY protrusions to hinder cutting
WARNING: Use add-on flashback arrestors.
VICTOR BULLDOG WITH VICTOR HEAD
Part No. Model No. Lever Position Tip Series Head Angle Overall Length
0381-1702 SHC 1102C ª CM
0381-1703 HC 1100C ª CM
0381-1704 HC 1101C ª CM
0381-1709 HC 1130C ª CM
0381-1710 HC 1131C ª CM
0381-1711 HC 1132C ª CM
0381-1712 HC 1150C ª CM
Bottom Rear 1
0381-1713 HC 1151C ª CM
0381-1714 HC 1152C ª CM
0381-1716 HC 1161C ª CM
0381-1717 HC 1162C ª CM
0381-1718 HC 1170C ª CM
0381-1719 HC 1171C ª CM
0381-1720 HC 1172C ª CM
74
Victor Heavy Industry
VICTOR CUTSKILL BULLDOG TIPS FOR USE WITH LP PROPANE AND NATURAL GAS
Preheat
Model Metal Thickness Cutting Oxygen Pressure Oxygen Fuel Pressure
Part No. No. in mm PSIG SCFH SCFH PSIG SCFH
Victor Style Tips
6700C0710 VBN-3 2.5 63.5
6700C0711 VBN-4 3 76.2
6700C0712 VBN-5 5 127.0
6700C0713 VBN-6 8 203.2
6700C0715 VBN-8 10 254.0
6700C0716 VBN-10 12 304.8
6700C0717 VBN-12 14 355.6
Harris Style Tips
6700C0723 HBN-3 3 76.2
6700C0724 HBN-4 5 127.0
6700C0725 HBN-5 6.5 165.1
6700C0726 HBN-6 8 203.2
Preheat oxygen pressure is controlled by cutting oxygen pressure when using cutting tips.
Harris® is a registered trademark of the Lincoln Electric Company.
Bulldog tips by Victor CutSkill offer a cost effective alternative for efficient scrap cutting
s &OR SCRAP CUTTING
s (EAVY WALL TWO PIECE DESIGN
s 2ESISTS SLAG BUILD UP
s !VAILABLE IN 6ICTOR AND (ARRIS STYLES
75
Straight Cutting Torches 6ICTOR 0ROFESSIONAL s Heavy Duty
OXY
USA V
FUEL
76
6ICTOR 0ROFESSIONAL s Heavy Duty
77
Machine Cutting Torches
STRAIGHT CUTTING TORCHES & CUTTING MACHINE REFERENCE GUIDE
Torch Model Tip Usage Fuel Gas Usage Cut Capacity
“FC” Models
ST 2600FC VanGuard™ Series 1 Any Fuel Gas MM TO MM
ST 1000FC VanGuard Series 1 Any Fuel Gas MM TO MM
ST 900FC VanGuard Series 1 Any Fuel Gas MM TO MM
CST 800FC VanGuard Series 3 Any Fuel Gas MM TO MM
Machine Torches
MT 200 (2 Hose) Series 1 Any Fuel Gas MM
MT 300 (3 Hose) Series 1 Any Fuel Gas MM
MT 1065 (3 Hose) Series 1 Any Fuel Gas MM
MT 5 (3 Hose) Series 1 Any Fuel Gas MM
CUTTING MACHINES
Torch Model Tip Usage Length Circle
VCM 200 (Cutting Machine) - CM CM
TIP TYPE: BTN FOR USE WITH NATURAL GAS & PROPANE. BTMP FOR USE WITH PROPYLENE
GASES (FOR USE WITH MT200, MT300 SERIES MACHINE CUTTING TORCHES).
Cutting Oxygen
Length of Bevel Tip Size Speed IPM Oxygen Pressure Fuel Pressure Pressure
MT 200 Series
1 4 -
1.5 4 -
2 4 -
2.5 4 -
3 5 -
3.5 5 -
4 5 -
4.5 5 -
5 6 -
5.5 6 -
6 6 -
MT 300N Series
1 4
1.5 4
2 4
2.5 4
3 5
3.5 5
4 5
4.5 5
5 6
5.5 6
6 6
"EVELS OF ª TO ª ARE POSSIBLE ON MILD STEEL AND MOST ALLOY STEEL WITHOUT A PREHEAT ATTACHMENT
High gas withdrawal rates will require manifolding. Consult your gas supplier.
78 Reference Guide
Machine Cutting Torches
Victor Machine Torches
They are available in two and three hose versions. Two hose
TORCHES ARE AVAILABLE IN MM MM AND
MM MODELS AND THREE HOSE TORCHES ARE AVAILABLE
The Check Valve
Prevents the reverse flow of gases.
IN MM AND MM MODELS
Retainer Seat Guide
Check Valve - Pair Pack
Gas Outlet
Flow Side
High Performance
Mixer Design
Provide optimum
performance
Rugged Brass
Torch head
and body
for maximum
strength
Victor machine cutting torches are available in two and three hose models. Three hose torches are a high performance “straight through”
design that minimizes turbulence and improves cut quality. Accessory reverse flow check valves are supplied for use at the torches inlet
connection. All machine torches use Series 1 cutting tips and are supplied with accessory reverse flow check valves.
MT 200 Series
(Two Hose)
V
C
T
R
I
s #UT CAPACITY MM
s 3ERIES CUTTING TIPS
Part No. Model No. Total Length Barrel Length Racking Length Gas
0380-0215 MT 204A MM MM - *Acetylene
0380-0217 MT 210A MM MM MM *Acetylene
0380-0216 MT 210N MM MM MM ,0.ATURAL 'AS
*May also be used on other pressurized fuel gases.
**May also be used on other fuel gases except acetylene
Other machine torch models available. Ask for details.
Gear racks: Must be ordered separately.
MT 300 Series
(Three Hose)
s #UT CAPACITY MM
s 3ERIES CUTTING TIPS
Part No. Model No. Total Length Barrel Length Racking Length Gas
0380-0222 MT 310A MM MM MM *Acetylene
0380-0220 MT 310N MM MM MM ,0.ATURAL 'AS
0380-0221 MT 310NV MM MM MM ,0.ATURAL 'AS
0380-0223 MT 310AV MM MM MM *Acetylene
0380-0227 MT 318A MM MM MM Acetylene
0380-0228 MT 318AV MM MM MM *Acetylene
0380-0225 MT 318N MM MM MM ,0.ATURAL 'AS
0380-0226 MT 318NV MM MM MM ,0.ATURAL 'AS
*May also be used on other pressurized fuel gases.
**May also be used on other fuel gases except acetylene
Other machine torch models available. Ask for details.
Gear racks: Must be ordered separately.
80
Victor Professional
Cutting Machines
MT 1065 (Three Hose)
s #UT CAPACITY MM
s &OR USE WITH ALL FUEL GASES
s 3ERIES CUTTING TIPS
s -ULTI TORCH BEVELING
Part No. Model No. Total Length Barrel Dia. Barrel Length Racking Length Gas
0399-1065 MT 1065N MM MM MM - All
0399-1121 MT 1065A MM MM MM - Acetylene
MT 5 (Three Hose)
s #UTTING CAPACITY MM
s &OR USE WITH ANY FUEL GAS 03) AND ABOVE
s 3ERIES CUTTING TIPS
Part No. Model No. Total Length Barrel Dia. Barrel Length Racking Length Gas
0380-0208 MT 5 MM MM MM MM All
81
Cutting Machines Victor Professional
DRIVE
opposite the torch for cooler, more efficient operation
s #OUNTER BALANCED DESIGN ALLOWS TORCH RACKING
DISTANCE UP TO MM FROM THE MACHINE
s 3PEED CONSTANT OVER WIDE RANGE OF TEMPERATURES
s 4ORCH HOLDER DESIGNED FOR
(35.1mm) barrel diameter torches
Package Description #1:
s #UTTING MACHINE
s -4 ! TORCH TORCH RACK
VCM 200 SERIES ORDERING INFORMATION s (OSES lTTINGS FOR HOSE OPERATION
s PITCH PINION TORCH HOLDER
Speed Range/ s HOSE MANIFOLD BLOCK
Model No. Part No. Minute Pkg. Includes
Package Description #2:
See Package s #UTTING MACHINE
0200-0220 VCM 200
(25.4mm-152.4cm) $ESCRIPTION s (OSES lTTINGS FOR HOSE OPERATION
See Package s PITCH PINION TORCH HOLDER
0200-0224 VCM 200HS s HOSE MANIFOLD BLOCK
(127mm-304.8cm) $ESCRIPTION
82
Victor Professional
Cutting Accessories
Model BHA 2
Model BHA 2 adjustable head adds flexibility to machine
cutting torches by allowing bevel cuts without changing
THE POSITION OF THE TORCH )T CAN BE SET AT ANY ANGLE FROM ª
TO ª ON EITHER SIDE OF VERTICAL
s 5SES 3ERIES CUTTING TIPS
s /PTIONAL PREHEAT ATTACHMENT IS AVAILABLE FOR USE
with the BHA adjustable head attachment. The
preheat attachment uses replaceable tip ends.
Model 591
Model 591 strip cutter for use with machine
cutting torches only. It is designed to accept two tips
for use with a common torch.
s 5SES 3ERIES CUTTING TIPS
s !DJUSTABLE FOR CUTTING STRIPS FROM MM TO
MM WIDE AND THICKNESS UP TO MM
83
Cutting Accessories Victor Professional
Test Gauges
For use when accurate line pressure is needed.
Gear Racks
For use with MT 200 and MT 300 Series cutting torches
(must be ordered separately).
84
Victor Professional
CA 2460 ª 1 TE
315FC RTE, W, ET !( MFA !(
CA 2461 ª 1 TEN
All
MFN .'0 CA 2462 ª 1 TEMFA
H 315FC RTEN .'0
Type 55 *ALL CA 2470 ª 3 TEMFN
Reference Guide 85
Welding and Heating Nozzles / Tips Victor Heavy Industry
WARNING:
s 5SE mASHBACK ARRESTORS
To approximate gross BTU s !LTHOUGH BUILT TO 6ICTORS QUALITY AND SAFETY STANDARDS
output, multiply flow rate by DUE TO THE CUTTING CAPACITY ANDOR DESIGN OF EACH
BTU value listed below. torch, flashback arrestors are not manufactured
Acetylene.................1470 into these Victor heavy industry torches.
Propane ...................2498 s 4O REDUCE THE RISK OF PERSONAL INJURY DEATH ANDOR
Methane ..................1000 property damage, use sufficient capacity flashback
Natural Gas..............1000 arrestors with all Victor heavy industry torch products.
Butane .....................3374 s !LTERNATIVE FUEL GAS ONLY REFERS TO PROPANE NATURAL
Propylene ................2371 gas, propylene gases. Acetylene, hydrogen and
gasoline are NOT included as an alternative gas.
86 Heating Guide
Victor Professional
MFN / MFN-1 – For Use with 100 and 300 Series Torch Handles
Type MFN, MFN-1 – for use with Propane & Natural Gas
Oxygen Pressure Fuel Pressure Oxygen Consumption Fuel Consumption
Tip Size (PSIG) (PSIG) (SCFH) (SCFH) BTU Per Hour
6
8 See Below
10
WARNING: Not for use with acetylene.
Heating Guide 87
Welding and Heating Nozzles / Tips
Heating Tip
Fuel Gas
Type
MFTA A
Application/ Available
Description Size
Available
Length
Available
Angles Part No.
Type 55 Components
The Type 55 Series multi-flames are available as
8 - - 0311-0241 components. Threaded elbows give you the flexibility
Multi-Flame
10 - - 0311-0230 to easily service or extend the length of the nozzles.
Heads
15 - - 0311-0231 By using the special extension adapter you can build
(Only)
20 - - 0311-0232 the length to suit your customer’s needs.
- MM ª 0304-0002
Multi-Flame
- MM ª 0304-0095
Elbows
- MM ª 0304-0011
Mixer and nut assembly, for use with pressures from
0328-0012
10 PSIG and up.
%XTENSION !DAPTER 4HREAD SPECIlCATIONS
0312-0064
.04& X 5.3&
All Type 55 heating nozzles must be used with HD 310C torch handle
AND MM HOSE
90 Heating Nozzles
Victor Heavy Industry
Heating Nozzles 91
Welding and Heating Nozzles / Tips Victor Professional
Application Available
/Description Size
Available
Length
Available
Angles Part No.
Type 55 Components
300 SERIES
Multi-Flame 6 - - 0311-0240 Type 55 Series multi-flames are available as components.
Heads 8 - - 0311-0241 Threaded elbows give you the flexibility to easily
service or extend the length of the nozzles. Use the
- MM ª 0304-0002
Multi-Flame special extensions adapter to extend the tip tube to the
- MM ª 0304-0095 required length.
Elbows
- MM ª 0304-0011
Mixer and nut assembly, for use with pressures from 10
0328-0012
PSIG and up.
%XTENSION !DAPTER 4HREAD SPECIlCATIONS
0312-0064
.04& X 5.3&
Not for use with acetylene.
92 Heating Nozzles
Victor Professional
MFN
Multi-flame heating head for
preheating priming, straightening, etc.
s &UEL GAS USAGE PROPANE NATURAL GAS
Tip End
Model Size Part No. Length Replacement Series
8 0323-0292 MM 0311-0560
MFN 300
10 0323-0302 MM -
6 0324-0117 0311-0611
MFN-1 MM 100
8 0324-0118 0311-0612
Heating Nozzles 93
Welding and Heating Nozzles / Tips Victor Professional
Series 1 Series 1
TYPE MFTA TYPE MFTN
Acetylene LP (Propane/Natural Gas)
For preheating before For preheating before
welding, descaling and paint welding, descaling and paint
burning etc. burning etc.
94 Heating Tips
6ICTOR 0ROFESSIONAL s Heavy, Medium & Light Duty
Welding Nozzles 95
Welding and Heating Nozzles / Tips 6ICTOR 0ROFESSIONAL s Heavy, Medium & Light Duty
ET-J
For use with J Series torch handles
96 Welding Nozzles
Victor Professional
Type Part No. Fuel Gas Usage Elbow Tips Length Series
4-UM-1 0328-0005 000-2 ET, 3 ET-1, 4 ET-1,
Oxy-Acetylene MM 100
7-UM-1 0328-0009 5 ET-1, 6 ET-1
RTEN
s 'ENERAL PURPOSE BRAZING PREHEATING
s ,ONG CONE mAME
s 5SES 4%. TIP ENDS
Welding Nozzles 97
Welding and Heating Nozzles / Tips Victor Professional
FE Series
Flexible Elbow
s &LEXIBLE ELBOW FOR SPECIAL WELDING
brazing, & heating needs
s -ULTI FUEL GAS SERVICE
s 5SES REPLACEMENT TIP ENDS
s 4HREAD
Type Part No. Fuel Gas Usage Tip End Replacements Length Series
FE 0323-0191 Multi-Gas Fuel Service TE, TEN,TEMFA,TEMFN MM 300
FE-1 0324-0066 Multi-Gas Fuel Service TE, TEN,TEMFA,TEMFN MM 100
FE-J 0325-0102 Multi-Gas Fuel Service TE, TEN,TEMFA, TEMFN MM J
Type Part No. Fuel Gas Usage Tip End Replacements Length Series
DFE 0323-0192 Multi-Gas Fuel Service TE, TEN,TEMFA,TEMFN - 300
DFE-1 0324-0092 Multi-Gas Fuel Service TE, TEN,TEMFA,TEMFN - 100
DFE-J 0325-0108 Multi-Gas Fuel Service TE, TEN,TEMFA,TEMFN - J
UN Series
Universal Nozzle
s 3TANDARD BEND NOZZLE FOR WELDING
brazing & heating
s 5SES REPLACEMENT TIP ENDS
s ª TIP ANGLE
s 4HREAD
Type Part No. Fuel Gas Usage Tip End Replacements Length Series
UN 0323-0242 Multi-Gas Fuel Service TE, TEN,TEMFA,TEMFN MM 300
UN-1 0324-0094 Multi-Gas Fuel Service TE, TEN,TEMFA,TEMFN MM 100
UN-J 0325-0101 Multi-Gas Fuel Service TE, TEN,TEMFA,TEMFN MM J
98 Welding Nozzles
Victor Professional
Straight Torches
101-L A ST 2600FC -
ST 1000FC -
All
ST 900FC -
108 A *HC 1200C -
Machine Torches
112 A
MT 200 -
A, LP
MT 300 -
118 A *Refer also to straight torch section.
Tip (Round)
100
Cutting Tips
Propylene
The information shown on this page shows Series 1 tip style, fuel gas usage and Victor equipment compatibility.
GTB P
101
Cutting Tips
LP (Propane/Natural Gas)
The information shown on this page shows Series 1 tip style, fuel gas usage and Victor equipment compatibility.
218 LP
Straight Torches
ST 2600FC - All
ST 1000FC - All
244 LP ST 900FC - All
*HC 1200C - All
*HC 1100C - Non-A
MCN LP
Machine Torches
MT 200 -
GPN LP A, LP
MT 300 -
*Refer also to straight torch section.
MTHN LP
HPN LP
GTB LP
102
Cutting Tips
Acetylene Propylene LP (Propane/Natural Gas)
The information shown on this page shows Series 3 tip style, fuel gas usage and Victor equipment compatibility.
GPP P
GPN LP
103
Cutting Tips
Cutting Tip Preheat Reference Chart
*Cutting
Oxygen
Tip Orifice Preheat Sizes for Various Tips
Size Size 100 101 1-104 108 110 111 112 129 200 116 117 118
000 74(0.023)
00 74(0.023) 65(0.035) 67(0.032)
0 71(0.027) 74(0.023) 75(0.022) 60(0.040) 60(0.040) 67(0.032) 71(0.027)
1 67(0.032) 71(0.027) 73(0.024) 56(0.046) 64(0.036) 56 (0.047) 64(0.036)
2 60(0.040) 67(0.032) 66(0.033) 54(0.055) 53 (0.060) 57 (0.043) 62(0.038) 66(0.033) 63(0.037)
3 66(0.034) 63(0.037) 53(0.060) 56(0.046) 52 (0.055) 60(0.040) 64(0.036)
4 66(0.034) 60(0.040) 52 (0.055) 55 (0.052) 56(0.046) 61(0.039) 56(0.048)
5 66(0.034) 53(0.060) 55(0.053)
6 63(0.037) 54(0.055) 57(0.044)
7 63(0.037)
8 63(0.037) 63(0.037) 57(0.044)
10 55(0.052) 57(0.044)
12 55(0.052) 56(0.048)
0.027 0.033 0.041 0.047 0.060 0.071 0.083 0.100 0.121 0.141 0.162 0.185 0.221
Data compiled using mild steel as test material. WARNING: At no time should the withdrawal rate of
*Applicable for three hose machine torch only. With a two- AN INDIVIDUAL ACETYLENE CYLINDER EXCEED OF THE
hose cutting torch, preheat pressure is set by the cutting cylinder contents per hour. If additional flow capacity
oxygen. is required use an acetylene manifold system of
&OR BEST RESULTS USE 34&# SERIES TORCHES AND sufficient size to supply the necessary volume.
hose when using tip size: 6 or larger.
!LL PRESSURES ARE MEASURED AT THE REGULATOR USING g X
HOSE THROUGH TIP SIZE AND g X HOSE FOR TIP
size: 6 and larger.
****Oxygen consumption is 1.1 times the acetylene under
neutral flame conditions.
Data compiled using mild steel as test material. Torch Preheat Preheat
*Applicable for three hose machine torch only. With a two-hose Series Oxygen (PSIG) Fuel (PSIG)
cutting torch, preheat pressure is set by the cutting oxygen.
&OR BEST RESULTS USE 34&# SERIES TORCHES AND HOSE MT 200 - 8 oz. and UP
when using tip size: 6 or larger. MT 300 8 oz. and UP
!LL PRESSURES ARE MEASURED AT THE REGULATOR USING g X ST 2600FC - 1 PSIG and UP
HOSE THROUGH TIP SIZE AND g X HOSE FOR TIP SIZE AND
larger. ST 900FC
- 5 PSIG and UP
ST 1000FC
Cutting Tips
TYPE 101
Size Series 1 Series 3
Boxed Clamshell 30° 101L Boxed Clamshell
000 0330-0003 - - - 0331-0002 -
00 0330-0004 0387-0133 - - 0331-0009 0387-0144
0 0330-0012 0387-0134 0330-0198 - 0331-0013 0387-0145
1 0330-0005 0387-0135 0330-0199 - 0331-0014 0387-0146
2 0330-0006 0387-0136 0330-0284 - 0331-0015 0387-0147
3 0330-0002 - - - 0331-0016 -
4 0330-0007 - - 0330-0531 0331-0017 -
5 0330-0008 - - - 0331-0018 -
6 0330-0009 - - 0330-0535 - -
7 0330-0013 - - - - -
8 0330-0014 - - - - -
Series 1 Series 1
TYPE 101 TYPE 101L
s 'ENERAL PURPOSE s 'ENERAL PURPOSE
s (AND MACHINE TORCH CUTTING s %XTRA LENGTH TIPS
Series 1 Series 3
TYPE 101 30° TYPE 101
s 'ENERAL PURPOSE s 'ENERAL PURPOSE
s (AND MACHINE TORCH CUTTING s (AND MACHINE TORCH CUTTING
ª WITH TORCH PERPENDICULAR
000 1 101
Acetylene 107
Cutting Tips Victor Professional
Series 1 Series 1
TYPE 108 TYPE 112
s "OILER TUBE REMOVAL s #UTTING CLOSE TO BULK HEADS
s 4IP IS SHORT TO INSERT s (AND CUTTING OF RIVET HEADS
head & tip inside tube
TYPE 118
Series 1 Series 3 Series 1
Size Round Cutaway Round TYPE 118
0 0330-0109 - - (Round)
2 0330-0113 - 0331-0035 s $ESEAMING SCARlNG
s 2IVET WASHING
4 0330-0114 - -
s 7ELD PREPARATION
6 - 0330-0115 -
8 - 0330-0116 -
Series 1 Series 3
TYPE 118 TYPE 118
(Sides Cutaway) (Round)
s $ESEAMING SCARlNG s $ESEAMING SCARlNG
s 2IVET WASHING s 2IVET WASHING
s 7ELD PREPARATION s 7ELD PREPARATION
108 Acetylene
Victor Professional
Cutting Tips
Series 1 Series 3 Series 1
TYPE GPP TYPE GPP TYPE HPP
s 'ENERAL PURPOSE s 'ENERAL PURPOSE s (EAVY PREHEAT
s (AND MACHINE s (AND MACHINE s 3CRAP AND BEVEL
torch cutting torch cutting
Series 1 Series 1
TYPE 318MP TYPE MTHP
s 'ENERAL PURPOSE s (IGH SPEED MACHINE CUTTING
s 'OUGING RIVET WASHING UP TO MM
Propylene 109
Cutting Tips Victor Professional
Series 1 Series 1
TYPE 200 TYPE 207
s 'ENERAL PURPOSE s 5SED FOR hBLOWINGv RIVETS
s (AND MACHINE TORCH CUTTING s 0OPULAR WITH VARIOUS
railroad applications
Series 1 Series 1
TYPE GTB TYPE 218
s 'OUGING TIP s $ESEAMING SCARlNG
s 2IVET WASHING
s 7ELD PREPARATION
Cutting Tips
Series 1 Series 1
TYPE 244 TYPE MCN
s #UTTING CLOSE TO BULK HEADS s %XTRA HEAVY PREHEAT
s 2IVET WASHING s 7IDE KERF
Series 1 Series 3
TYPE GPN TYPE GPN
s 'ENERAL PURPOSE s 'ENERAL PURPOSE
s (AND MACHINE TORCH CUTTING s (AND MACHINE TORCH CUTTING
Series 1 Series 1
TYPE HDNL TYPE MTHN
s %XTRA HEAVY DUTY s (IGH SPEED MACHINE CUTTING
cutting torches UP TO MM
s %MERGING BILLET CUTTING
s &OUNDRY STEELMILL WORK Size Part No.
00 0333-0363
0 0333-0364
Size Part No. 1 0333-0365
2 0333-0366
6 0330-0553 3 0333-0367
8 0330-0554 4 0333-0368
10 0330-0547 5 0333-0369
12 0330-0548 6 0333-0370
14 0330-0549 8 0333-0372
16 0330-0550
Series 1 Series 1
TYPE HPN TYPE BTN
s (EAVY PREHEAT s (EAVY PERFORMANCE
s 3CRAP AND BEVEL bevel cutting for use
with mild steel
s (3,! 4 (6
Size Part No.
Size Part No.
0 0333-0322
1 0333-0323 4 0333-0206
2 0333-0324 5 0333-0207
3 0333-0325 6 0333-0208
4 0333-0326
5 0333-0327
6 0333-0328
8 0333-0330
10 0333-0331
12 0333-0332
Series 1
TYPE CSN
s 3CRAP CUTTING
s 5SE WITH NATURAL GAS
Cutting Tips
Series 1 Series 1
TYPE 101 TYPE 108
s 'ENERAL PURPOSE s "OILER TUBE REMOVAL
s -EDIUM PREHEAT s -EDIUM PREHEAT
s !CETYLENE s !CETYLENE
Series 1
TYPE 118
s 'OUGING GROOVING
rivet washing
s -EDIUM PREHEAT
s !CETYLENE
Sizes: 0, 2, 4
Sizes: 6, 8
Acetylene 113
Cutting Tips Victor CutSkill
Series 1 Series 1
TYPE 303MP TYPE 318MP
s 'ENERAL PURPOSE s 'OUGING GROOVING
s -EDIUM PREHEAT rivet washing
s 0ROPYLENE s -EDIUM PREHEAT
s 0ROPYLENE
Series 1
TYPE HPP
s (AND MACHINE CUTTING
s (EAVY PREHEAT
s 0ROPYLENE
114 Propylene
Victor CutSkill
Cutting Tips
Series 1 Series 1
TYPE GPP TYPE MTHP
s 'ENERAL PURPOSE s (IGH SPEED MACHINE CUTTING
s 4WO PIECE s 4WO PIECE
s -EDIUM PREHEAT s -EDIUM PREHEAT
s 0ROPYLENE s 0ROPYLENE
Series 1
TYPE GPP-P (PLATED)
s 'ENERAL PURPOSE
s 4WO PIECE
s -EDIUM PREHEAT
s 0ROPYLENE
Propylene 115
Cutting Tips Victor CutSkill
Series 1 Series 1
TYPE 218 TYPE GPN &
s 'OUGING GROOVING GPN-P (PLATED)
rivet washing s 'ENERAL PURPOSE
s -EDIUM PREHEAT s (AND MACHINE CUTTING
s .ATURAL GASPROPANE s 4WO PIECE
s -EDIUM PREHEAT
s .ATURAL GASPROPANE
Cutting Tips
Series 3 Series 3 Series 3
TYPE 101 TYPE 118 TYPE 318MP
s 'ENERAL PURPOSE s 'OUGING GROOVING s 'ENERAL PURPOSE
s -EDIUM PREHEAT rivet washing s 'OUGING RIVET WASHING
s !CETYLENE s -EDIUM PREHEAT
s !CETYLENE
Series 3 Series 3
TYPE GPP TYPE GPN
s 'ENERAL PURPOSE s 'ENERAL PURPOSE
s 4WO PIECE s 4WO PIECE
s -EDIUM PREHEAT s -EDIUM PREHEAT
s 0ROPYLENE s .ATURAL GASPROPANE
Harris and Airco are in no way affiliated with Victor CutSkill or Thermadyne Industries, Inc. The parts advertised for sale are not genuine manufacturer parts, but are parts
made for and by Victor CutSkill and Thermadyne Industries, Inc. Reference to Harris and Airco products are for your convenience only. We reserve the right to substitute
genuine manufacturer parts in place of Victor CutSkill parts.
Cutting Tips
SMITH® Cutting Tips
Standard Cutting Tips (SC-12, SC-60)
Material thickness up to: (in) 3/16 3/8 5/8 1.25 2 4 8 12
Material thickness up to: (mm) 5 9 16 32 51 101 200 305
Tip Size 00 0 1 2 3 4 5 6
Drill Size 68 62 56 54 51 45 41 32
Oxygen Pressure (PSI) 20 30-35 35-40 35-40 40-45 35-50 50-70 70-90
Oxygen Pressure (BAR) 1.4 2.4-2.4 2.4-2.8 2.4-2.8 2.8-3.1 2.4-3.4 3.4-4.8 4.8-6.2
Fuel Pressure (PSI) 10 10 10 10 10 10 10 10
Fuel Pressure (BAR) 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68
Smith is in no way affiliated with Victor CutSkill or Thermadyne Industries, Inc. The parts advertised for sale are not genuine manufacturer parts, but are parts made for and
by Victor CutSkill and Thermadyne Industries, Inc. Reference to Smith products are for your convenience only. We reserve the right to substitute genuine manufacturer parts in
place of Victor CutSkill parts.
Airco - Style
TYPE 245 (A-FS)
s 4WO PIECE
s -EDIUM PREHEAT
s 0ROPYLENE
Airco is in no way affiliated with Victor CutSkill or Thermadyne Industries, Inc. The parts advertised for sale are not genuine manufacturer parts, but are parts made for and
by Victor CutSkill and Thermadyne Industries, Inc. Reference to Airco products are for your convenience only. We reserve the right to substitute genuine manufacturer parts in
place of Victor CutSkill parts.
Cutting Tips
Harris® - Style Harris - Style
TYPE 6290 TYPE 6290-GG
s 'ENERAL PURPOSE s 'OUGING GROOVING RIVET WASHING
s -EDIUM PREHEAT s -EDIUM PREHEAT
s !CETYLENE s .ATURAL GASPROPANE
Harris - Style
TYPE 6290-NX (PLATED)
s (AND AND MACHINE CUTTING
s -EDIUM PREHEAT
s .ATURAL GASPROPANE
s 4WO PIECE
Harris is in no way affiliated with Victor CutSkill or Thermadyne Industries, Inc. The parts advertised for sale are not genuine manufacturer parts, but are parts made for and
by Victor CutSkill and Thermadyne Industries, Inc. Reference to Harris products are for your convenience only. We reserve the right to substitute genuine manufacturer parts in
place of Victor CutSkill parts.
Smith - Style
SC-60
s 'ENERAL PURPOSE
s (AND MACHINE CUTTING
s -EDIUM PREHEAT
s -APPPROPYLENE
s 4WO PIECE
Smith is in no way affiliated with Victor CutSkill or Thermadyne Industries, Inc. The parts advertised for sale are not genuine manufacturer parts, but are parts made for and
by Victor CutSkill and Thermadyne Industries, Inc. Reference to Smith products are for your convenience only. We reserve the right to substitute genuine manufacturer parts in
place of Victor CutSkill parts.
Note: The use of both regulator and torch mount flashback arrestors with heavy industry equipment
requiring high gas volume is not recommended because it may cause excessive flow
restriction. It is always better to place the safety devices at the rear of the torch than at the
regulator.
Nut and
swivel Gas-tight Brass Check-valve Retainer Seat Guide
assembly O-ring seal housing assembly
Threads for Seating cup Stainless-steel Disk assembly Spring compresses under
connection to sintered filter seals tight against normal flow, moving
torch or regulator acts as a seat in event of disk assembly forward
flame block reverse flow. and allowing gas flow.
Safety Accessories
FB-O FB-F
Torch Mount Torch Mount
FB-OR FB-FR
Regulator Mount Regulator Mount
Safety Accessories
KWIK-CONNECT™ TORCH/HOSE CONNECTIONS
Part No. Model/Description
Torch /Hose Connections
0656-0000 KC-1 Kwik Connect Pair Pack (Oxygen and Fuel)
0312-0090 KCO Kwik Connect (Oxygen)
0312-0091 KCF Kwik Connect (Fuel)
Victor CutSkill
Acetylene ...............300, 200, 520, 510 Carbon Dioxide ......320 Nitrogen .................**680, 580
Air (industrial)........590 Helium ....................**680, 580 Nitrous Oxide .........326
Air (Breathing) .......**347, 346 Hydrogen ................**695, 350 Oxygen ...................**701, H577, 540
Argon ......................**680, 580 Methane .................**695, 350 Propane ..................510
Butane ....................510 Natural Gas ............**695, 350
These CGA connections are designed by Compressed Gas Association, Standard V-1, 6th Edition, 1987. For latest standards and
connections, contact Compressed Gas Association.
*Inlet pressure up to 4000 PSIG
**Inlet pressure up to 5500 PSIG
128
Victor Professional
129
CGA Gas Cylinder Valve Outlets & Connections Victor Professional
130
Victor Professional
CGA 695 FUEL GASES to 5500 PSIG CGA 701 OXYGEN to 5500 PSIG
Part No. Description Part No. Description
0959-0003 .54 .'/ 2(- #HROME 0988-0003 .54 .'/ 2(&
131
CGA Gas Cylinder Valve Outlets & Connections Victor Professional
VICTOR 993 BRITISH FUEL GAS VICTOR 997 MANIFOLD FUEL GAS
Part No. Description Part No. Description
0993-0003 .54 .'/ ,(- "RASS 0997-0004 .54 .03 ,(& "RASS
0970-0005 37)6%, .04 "RASS MM ,ONG 0996-0005 37)6%, .04 "RASS
0970-0008 37)6%, .04 "RASS MM ,ONG .O &ILTER MM ,ONG
0970-0015 37)6%, .04 "RASS MM ,ONG 0996-0031 37)6%, .04 "RASS
.O &ILTER MM ,ONG
/RIlCE (YDROGEN /NLY
0996-0032 37)6%, .04 "RASS
.O &ILTER MM ,ONG
/RIlCE (YDROGEN /NLY
132
Victor Professional
133
NOT JUST SAFE. VICTOR SAFE.
Follow these rules for maximum safety on the job.
ENUINE
G
S
IN 3
CE 191
1-800-426-1888
1
Read operating instructions
2
Always keep cylinders
www.victorequip.com carefully before using equipment. securely chained. Keep
A guide to safe operation is valve caps on when not
included in all Victor outfits. in use.
This is
where the
FBA is
4
Stand to the side when
5
Always use flashback
3
Inspect regulator inlet and
cylinder valve for any evidence opening the cylinder valve. arrestors and reverse
of oil or grease. If oil or grease is Always open the valve flow check valves when
found – do not use regulator! slowly and carefully. operating gas equipment.
7
Always purge the system
8
Wear protective clothing.
6
Carefully inspect
torch connections for before lighting the torch. Insure proper ventilation.
damaged or missing Use tip charts when setting Always keep sparks away
“O” rings. operating pressure. from combustibles.
134
STATEMENT OF WARRANTY
LIMITED WARRANTY: THERMADYNE warrants that its products will be free of defects in workmanship or mate-
rial. Should any failure to conform to this warranty appear within the time period applicable to the THERMADYNE
products as stated below, THERMADYNE shall, upon written notification thereof and substantiation that the product
has been stored, installed, operated, and maintained in accordance with THERMADYNE’s specifications, instruc-
tions, recommendations and recognized standard industry practice, and not been subject to misuse, repair, neglect,
alteration, or accident, correct such defects by suitable repair or replacement, at THERMADYNE’s sole option, of
any components or parts of the product determined by THERMADYNE to be defective.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
LIMITATION OF LIABILITY: THERMADYNE shall not under any circumstances be liable for special, indirect or
consequential damages, such as, but not limited to, damage or loss of purchased or replacement goods, business
interruption or loss of profit, or claims of customers of distributor (hereinafter the “Purchaser”) for service inter-
ruption. The remedies of the Purchaser set forth herein are exclusive and the liability of THERMADYNE with respect
to any contract, or anything done in connection therewith such as the performance or breach thereof, or from the
manufacture, sale, delivery, resale, or use of any goods covered by or furnished by THERMADYNE whether arising
out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as expressly provided
herein, exceed the price of the goods upon which such liability is based.
THIS WARRANTY BECOMES INVALID IF REPLACEMENT PARTS OR ACCESSORIES ARE USED WHICH MAY
IMPAIR THE SAFETY OR PERFORMANCE OF ANY THERMADYNE PRODUCT.
This warranty is effective for the time stated in the Warranty Schedule beginning on the date that the authorized
distributor delivers the products to the Purchaser.
Warranty repairs or replacement claims under this limited warranty must be submitted by an authorized
THERMADYNE repair facility within thirty (30) days of the repair. No transportation costs of any kind will be paid
under this warranty. Transportation charges to send products to an authorized warranty repair facility shall be the
responsibility of the Purchaser. All returned goods shall be at the Purchaser’s risk and expense. This warranty
supersedes all previous THERMADYNE warranties.
WARRANTY SCHEDULE
The warranty is effective below for the time stated in the Warranty Schedule beginning on the date that
the authorized distributor delivers the products to the purchaser. THERMADYNE reserves the right to
request documented evidence of date of purchase.
ISO 9001
REGISTERED FIRM
The Quality System of
Thermadyne at our
Denton, Roanoke and
Hermosillo locations
is registered to meet the
requirements of ISO 9001
U.S. Customer Care: 800-426-1888 / FAX 800-535-0557 U Canada Customer Care: 905-827-4515 / FAX 800-588-1714
International Customer Care: 940-381-1212 / FAX 940-483-8178 U www.victorequip.com