Professional Documents
Culture Documents
T&D Products Catalogue
T&D Products Catalogue
Distribution Transformer
Switchgear Panel
VCB Dry-type
Transformer
Turn-key Project
More >>>
CONTENTS
Transformer
Oil-immersed Power Transformer 1
Distribution Transformer 2
Dry-type Transformer 3
Reactor 4
Disconnector 7
CT & VT 8
MV Switchgear Panel 9
C-GIS 11
LV Switchgear Panel 12
Prefabricated Substation 13
Surge Arrester 16
Insulator 17
Application: For power station, transformer substation, and industrial enterprises, etc..
Standards: IEC 60076-1, IEC 60076-2, IEC 60076-3, IEC 60076-5; ANSI, IEEE, AS, VEIKI, EN, etc.
Parameters: Rated Voltage: up to 750kV
Capacity: up to 1200MVA (Three phases)
Capacity: up to 400MVA (Single phase)
Features: High security and reliability in operation.
Economic and efficient to reduce network loss and operation cost.
High short circuit strength and insulating strength.
Compact design, Low noise and light in weight.
Customized transformers are available on your requirement.
Competitive short delivery time.
Distribution Transformer
Dry-type Transformer
Reactor
Disconnector
Application: In rated voltage 35~220kV power system, to separating the circuits under off-
load status, set up air electrical clearning between the tested electrical
apparatuses and electrified circuit.
Standards: IEC 62271-102
Parameters: 40.5-252kV.
Features: Simple structure, reliable operation.
Simple installation and easy adjustment.
Adopt anti - corrosion design, anti - corrosion performance.
JW-126~252
CT
VT
Application:
Power transmission and distribution
Integration of renewable power generation units to the grid
Offshore and onshore wind power connections
Very large power plants
Industry applications
Long range power transmission
09
MV SWITCHGEAR PANEL
Application:
Power transmission and distribution
Integration of renewable power generation units to the grid
Offshore and onshore wind power connections
Very large power plants
Industry applications
Long range power transmission
NHM6-12 XGN15-12(F)/XGN15-12(F·R)
Application:
Power transmission and distribution
Integration of renewable power generation units to the grid
Offshore and onshore wind power connections
Very large power plants
Industry applications
Long range power transmission
Application: for circuit control, protection, monitoring and power distribution in power distribution system.
Standards: IEC 61439.2-2011
Parameters: up to 400V(690V), 50/60Hz
Features: High reliability
Simple structure
High insulation strength.
Fully sealed and reliable operation.
Application: as the DC power supply for the power plants and substations.
Features: High reliability
Simple structure
High insulation strength.
Prefabricated Substation
YBP(M)29 HV/LV
Prefabricated substation (PV, wind power) Prefabricated Substation
Application: It is suitable for the environment with relatively harsh Application: Development of standard distribution Smart Substation
natural conditions, for the design and development of new for national Power Grid Corp.
energy power generation. Standards: IEC 61439.2-2011
Standards: IEC 61439.2-2011 Parameters: up to 110kV
Features: Easy installation, short construction period, low Features: Fast Installation, short construction period improved
running cost, safety and reliability. engineering quality, safe operation.
Application: for making and breaking of load current, over-load current and short-circuit current to
control and protect the circuit and transformer, etc. in power distribution system.
Standards: IEC 61439.2-2011
Parameters: Rated voltage: 12-40.5kV.
Rated current: 630-1250A.
Features: Indication of the active contact to show the operation status of the switch.
High insulation level.
Fully sealed and reliable operation.
NE1-24 JN15-12
Application: It is suitable for power system with 24kV and below, AC Application: protection device for protecting power system from over-
50Hz for grounding protection during overhaul of high load and short-circuit failure.
voltage electrical equipment. Standards: IEC60282-2:2008, ANSI
Standards: IEC 62271-102 Parameters: 12kV~36kV
Parameters: 12kV~24kV Features: Excellent over-current protection
Features: Compact design, stale performances and reliable High power frequency withstand voltage
contact. Reliable insulation capability.
Easy installation and adjustment.
Application: for protection of power transmission & distribution system from over- voltage.
Standards: IEC 60120、IEC 60372、IEC 60471、IEC 60815、IEC 61109、IEC 62217
Parameters: up to 1000kV
Features: Secure and reliable operation on high mechanical strength.
Compact design and light in weight which is convenient for transportation. Good
anti-vibration capability. Good anti-moisture capability.
India Cambodia
CHINT India Energy Solution Private Limited CHINT (Cambodia) Power Equipment Co., Ltd
Address: Discovery Tower, Plot No. A-17, Ground Floor Industrial Area Sector 62 Address: No.15, St. 542, Sangkat Boeung Kok 1, Khan Toul Kork, Phnom Penh,
Noida, India 201309. Cambodia.
Tel: +91 1202 9750 57 Tel: +855 23 231 077
Email: marketing@chint.co.in Email: lbin3@chintglobal.com
Website: www.chint.co.in Website: www.chintglobal.com
Latin America
Brazil Ecuador
CHINT ELECTRICS (HONG KONG) LIMITED (Ecaudor Branch)
CHINT Elétricos América do Sul Ltda.
Add.: Calle: REP.DEL SALVADOR Número: 10-84 Intersección: AV NACIONES
Add: Av. Paulista, 1765 - Edifício Scarpa - Conjunto 22 , Bela Vista - CEP
UNIDAS
01311-200 - São Paulo - SP
Edificio: CENTRO COMERCIAL MANSION BLANCA
Tel. : +55 (11) 3266-7786
E-mail: lufz@chintglobal.com
E-mail: chintbr@chint.com
Peru
CHINT LATAM (PERU) S.A.C.
Add: Av. Camino Real No.348, Torre El Pilar, Oficina 603, San Isidro, Lima 27,
Peru
Tel: +51 1 763 4917
Email: chintlatamperu@chint.com