Professional Documents
Culture Documents
INOVANCE-AM600-0032ETN-DO-MODULE-PRODUCT-NOTE-ENGLISH-20-4-20
INOVANCE-AM600-0032ETN-DO-MODULE-PRODUCT-NOTE-ENGLISH-20-4-20
During control system design During maintenance & inspection ■■ General Specifications
CAUTION
". *OPWBODFNFEJVNTJ[FE 5XP34 POF$"/PQFO$"/MJOL JOQVU & -PHJD*0FYQBOTJPONPEVMF 3 3FMBZPVUQVU
A01
1-$BVUPNBUJPONPUJPO 0OF-"/ &UIFS$"5CVT
PVUQVUT 51 5SBOTJTUPSPVUQVU 4063$&
5XP34 POF-"/
5/ 5SBOTJTUPSPVUQVU 4*/,
1SP珝CVT%1CVT
90.0
◆◆ Prevent metal filings and wire ends from dropping into ventilation holes of the PLC
90.00
during installation. Failure to comply may result in fire, fault and malfunction. /BNFQMBUF
◆◆ Ensure there are no foreign matters on ventilation surface. Failure to comply may
1
.0%&- ".&5/
result in poor ventilation, which may cause fire, fault and malfunction. 108&3*/165 /0/&
◆◆ Ensure the module is connected to the respective connector securely and hook the
065165 /0/&
Figure 1 Description of model and nameplate Figure 3 Mounting dimensions (in mm)
Thank you for purchasing the AM600-0032ETN digital output expansion module WARNING
5. Electrical Design Reference
developed and manufactured independently by Inovance. Model Classification Description Applicable to
◆◆ Wiring must be carried out by personnel who have received the necessary electrical
This product provides NPN outputs, and is used together with the AM600CPU, AM600- Digital output 32-point DO module; AM600 series,
training and understood enough electrical knowledge.
AM600-RTU-ECT, AM600-RTU-COP, AM600-RTU-DP and H3U modules to expand the
digital output ports. ◆◆ Disconnect all external power supplies of the system before wiring. Failure to comply 0032ETN module transistor output (Drain) H3U ■■ Cable Selection
may result in electric shock, module fault or malfunction.
This guide describes the specifications, characteristics and using methods of
◆◆ Install the terminal cover attached to the product before power-on or operation after ■■ External Port Applicable Cable
AM600-0032ETN digital output expansion module. Please read this guide carefully wiring is completed. Failure to comply may result in electric shock. Cable Diameter Crimping
before using to ensure more safe usage. Please refer to the AM600 Series PLC Model Manufacturer
◆◆ Perform good insulation on terminals so that insulation distance between cables will not Name Tool
Hardware Manual and the AM600 Series PLC Programming Manual to understand
4JHOBMJOEJDBUPST
MM2 AWG
reduce after cables are connected to terminals. Failure to comply may result in electric
the use of the user program development environment and design method of the shock or damage to the equipment. Tubular lug GTVE10006 1.0 18 Suzhou Yuanli YAC-5
user program of the product. You can download the latest materials from www.
inovance.com. CAUTION Those cable lugs are applicable to AM600-0032ETN digital modules, and the cable
2. Safety Information and Precautions ◆◆ Prevent dropping metal filings and wire ends drop into ventilation holes of the PLC at
rated temperature is required to be above 75 ºC.
Safety information and precautions are identified into two grades: Warning and
wiring. Failure to comply may result in fire, fault and malfunction.
■■ Cable Preparing Procedures
◆◆ The external wiring specification and installation method must comply with local
Caution. Please make sure to operate properly with adequate safety assurance.
regulations. For details, see the wiring section in this guide. ◆◆ Strip back the wire outer coating by 6 mm. Pass the cable through the tube of
Indicates the improper operation which, if not avoided, may proper wire size.
90.00
◆◆ To ensure safety of equipment and operator, use cables with sufficient diameter and
WARNING
-PDBMFYUFOTJPO -PDBMFYUFOTJPO
◆◆ Insert the exposed end into the hole of the cable lug, and then crimp it with
JOUFSGBDF JOUFSGBDF
◆◆ Wire the module correctly after making clear of the connector type. Failure to comply recommended crimping tool.
Indicates the improper operation which, if not avoided, may
CAUTION may result in module and external equipment fault.
cause moderate or minor injury, as well as equipment damage. ◆◆ Put the cable lug onto the terminal and tighten the screw with a screwdriver.
◆◆ Tighten bolts on the terminal block in the specified torque range. If the terminal is not
In some cases, even failure to follow"Cautions" may also lead to serious tight, short-circuit, fire or malfunction may be caused. If the terminal is too tight, fall-off, The maximum tightening torque is 0.45 N.m.
consequences. Please make sure to follow both warnings and cautions, otherwise, short-circuit, fire or malfunction may be caused. 6TFSPVUQVUUFSNJOBM
it may cause death or serious injury, as well as product and relevant equipment and
N
◆◆ If the connector is used to connect with external equipment, perform correct crimping or
N
1BTTUISPVHIUIFUVCFPG
system damage. welding with the tool specified by manufacturer. If connection is in poor contact, short- QSPQFSXJSFTJ[F $SJNQJUXJUIBDSJNQJOHUPPM
circuit, fire or malfunction may be caused. Figure 2 Diagram of digital output module interface
Please keep this guide well so that it can be read when necessary and forward this
guide to the end user. ◆◆ A label on the top of the module is to prevent foreign matters entering the module. Do
not remove the label during wiring. Remember to remove it before system operation, Interface Name Function
During control system design facilitating ventilation. User input terminals 4groups output with 8 channels in each group
◆◆ Do not bundle control wires, communication wires and power cables together. They must Corresponding to various output signals. ON: output
The AM600-0032ETN module supports 32-channel digital output and uses a 40-pin
$I2
$I2
$I2
$I2 $POWFSTJPOUFSNJOBMCMPDL
high-density terminal as a user terminal. The following figure shows the interface
)JHIEFOTJUZFYUFOTJPODBCMF $I2
UFSNJOBMBTTFNCMZ $I2
$I2 5, 4J30/
diagram:
$I2
$I2
$I2
$I2
$I2
$I2
$I2
$I2
$POWFSTJPOUFSNJOBMCMPDL $I2
① $0.
$0.
7
③ 7
$I2
39
$I2
40
7
② $I2
$I2 7
2) Select the module AM600-0032ETN to be added from the module list. Double-
$I2 $0.
$I2 $0.
$POOFDUJPOUP%0TJHOBMT $I2 $I2
click the module to automatically add it to the expansion rack, or use left
POUIFVTFSTJEF $I2 $I2
$I2
$I2
Do not bundle the terminal connection cables together with power cables (high
&YUFSOBM8JSJOH 5FSNJOBM/P *OUFSOBM$JSDVJU
$PMVNO# $PMVNO"
channels 0 and 1 of the AM600-0032ETN module respectively, as shown in the the Y port on the main module is Y37, series numbers of the Y port on the expansion
voltage, large current) which produce strong interference signals. Separate it from module are programmed to Y40~Y57.
following figure.
7QPXFSTVQQMZ 7QPXFSTVQQMZ *OUFSOBM
6. Programming Examples
DPNQPOFOU
-PBE $)PVUQVU $)PVUQVU
*TPMBUJOH
$I2 $I2 DPNQPOFOU
-PBE $)PVUQVU $)PVUQVU
Warranty Agreement
$)PVUQVU $)PVUQVU
When the inductive load is applied, large back EMF will be produced between
*TPMBUJOH
$I2 $I2
contacts and arc discharge is also caused when the inductive load stops. This may
DPNQPOFOU
-PBE $)PVUQVU $)PVUQVU
result in contact failure or contact sag, shortening the contact lifetime. Therefore, 1) Inovance provides an 18-month free warranty to the equipment itself from the
$I2 *TPMBUJOH
$I2 DPNQPOFOU
it is recommended to use the products which have built-in relay protection circuit.
-PBE
date of manufacturing for the failure or damage under normal use conditions.
$)PVUQVU $)PVUQVU
*TPMBUJOH
The freewheel diode must satisfy: ① reverse voltage is 5 to 10 times of load voltage;
$I2 $I2
2) Within the warranty period, maintenance will be charged for the damage
DPNQPOFOU
-PBE $)PVUQVU $)PVUQVU
② forward current is larger than load current.
caused by the following reasons:
$I2 *TPMBUJOH
$I2 DPNQPOFOU
-PBE $)PVUQVU $)PVUQVU
$I2
$I2 *OEVDUJWFMPBE 4) After successful compiling, log in to download the project and run it. a. Improper use or repair/modification without prior permission
7QPXFSTVQQMZ
7QPXFSTVQQMZ *OUFSOBM
QPXFSTVQQMZ
b. Fire, flood, abnormal voltage, natural disasters and secondary disasters
c. Hardware damage caused by dropping or transportation after
7%$ 7 7 1-$PVUQVU
$)DPNNPOUFSNJOBM $)DPNNPOUFSNJOBM DPOUBDU
$0.
$0. *TPMBUJOH 'MZXIFFMEJPEF procurement
d. Operations not following the user instructions
DPNQPOFOU 1、Build 2、Login 3、Start
■■ Electric Shock Protection When Using Capacitive Load ■■ Programming Example for H3U + AM600-0032ETN Module
DPNQPOFOU
-PBE $)PVUQVU $)PVUQVU
3) The maintenance fee is charged according to the latest Maintenance Price List
$I2 $I2 *TPMBUJOH
No large capacitive load shall be connected to the output interfaces of this product, Use H3U as the main control module and set the first channel of the AM600-0032ETN of Inovance.
-PBE DPNQPOFOU
$)PVUQVU $)PVUQVU
module to active; the usage of AM600-0016ETP is described as follows:
otherwise false fault may be detected when a channel is turned off.
$I2 $I2
4) If there is any problem during the service, contact Inovance's agent or
*TPMBUJOH
DPNQPOFOU
1) Create a project, select"H3U". Then the system enters the main page.
-PBE $)PVUQVU $)PVUQVU
Inovance directly.
■■ Programming Example for AM600+AM600-0032ETN
$I2 $I2
① Double-click"Module Configuration"; ② The simulation graphics of the rack
*TPMBUJOH
as follows:
-PBE $)PVUQVU $)PVUQVU
Address: No.16, Youxiang Road, Yuexi Town, Wuzhong District, Suzhou 215104,
$I2 $I2 *TPMBUJOH
P.R. China
-PBE DPNQPOFOU
$)PVUQVU $)PVUQVU
Website: http://www.inovance.com
$I2 $I2
When converting the wiring using a SIRON T024-K conversion terminal, the
following figure shows the relation between terminal numbers and module
terminal pin numbers (confirm the actual correspondence of the terminal when
using conversion terminals of other models):