Professional Documents
Culture Documents
Subaru Tribeca Manuals - 2011 Tribeca Owner-s Manual (1)
Subaru Tribeca Manuals - 2011 Tribeca Owner-s Manual (1)
Owner Manual
Foreword
Congratulations on choosing a SUBARU vehicle. This Owner’s
Manual has all the information necessary to keep your SUBARU in
excellent condition and to properly maintain the emission control
system for minimizing emission pollutants. We urge you to read
this manual carefully so that you may understand your vehicle and
its operation. For information not found in this Owner’s Manual,
such as details concerning repairs or adjustments, please contact
the SUBARU dealer from whom you purchased your SUBARU or
the nearest SUBARU dealer.
The information, specifications and illustrations found in this
manual are those in effect at the time of printing. FUJI HEAVY
INDUSTRIES LTD. reserves the right to change specifications and
designs at any time without prior notice and without incurring any
obligation to make the same or similar changes on vehicles
previously sold. This Owner’s Manual applies to all models and
covers all equipment, including factory installed options. Some
explanations, therefore may be for equipment not installed in your
vehicle.
Please leave this manual in the vehicle at the time of resale. The
next owner will need the information found herein.
*
C Copyright 2010 FUJI HEAVY INDUSTRIES LTD.
1
– CONTINUED –
2
LATCH Lower anchors and tethers for Child restraint lower an-
children chorages
– CONTINUED –
4
Windshield wiper mist (for Instrument panel outlets Door unlock (transmitter)
single wipe)
Rear window wiper Instrument panel outlets and Rear gate (transmitter)
foot outlets
Safety precautions when . The SRS airbags deploy with & Child safety
driving considerable speed and force.
Occupants who are out of proper WARNING
& Seatbelt and SRS airbag position when the SRS airbag
deploys could suffer very serious . Never hold a child on your lap or
injuries. Because the SRS airbag in your arms while the vehicle is
WARNING moving. The passenger cannot
needs enough space for deploy-
. All persons in the vehicle should ment, the driver should always protect the child from injury in a
fasten their seatbelts BEFORE sit upright and well back in the collision, because the child will
the vehicle starts to move. Other- seat as far from the steering be caught between the passen-
wise, the possibility of serious wheel as practical while still ger and objects inside the vehi-
injury becomes greater in the maintaining full vehicle control cle.
event of a sudden stop or acci- and the front passenger should . While riding in the vehicle, in-
dent. move the seat as far back as fants and small children should
possible and sit upright and well always be placed in one of the
. To obtain maximum protection in
back in the seat. rear seating positions recom-
the event of an accident, the
driver and all passengers in the mended in this Owner’s Manual
For instructions and precautions, carefully in an infant or child restraint
vehicle should always wear seat- read the following sections.
belts when the vehicle is moving. system which is appropriate for
The SRS (Supplemental Restraint . For the seatbelt system, refer to “Seat- the child’s age, height and
System) airbag does not do away belts” F1-17. weight. If a child is too big for a
with the need to fasten seatbelts. . For the SRS airbag system, refer to child restraint system, the child
In combination with the seat- “*SRS airbag (Supplemental Restraint should sit in a REAR seat and be
belts, it offers the best combined System airbag)” F1-45. restrained using the seatbelts.
protection in case of a serious According to accident statistics,
accident. children are safer when properly
restrained in the rear seating
Not wearing a seatbelt increases positions than in the front seat-
the chance of severe injury or ing positions. Never allow a child
death in a crash even when the to stand up or kneel on the seat.
vehicle has the SRS airbag.
. Put children aged 12 and under in
a REAR seat properly restrained
– CONTINUED –
6
at all times in a child restraint . Never leave unattended children gine exhaust system to prevent
device or in a seatbelt. The SRS in the vehicle. They could acci- engine exhaust gas from enter-
airbag deploys with considerable dentally injure themselves or ing the vehicle.
speed and force and can injure or others through inadvertent op- . Never run the engine in a closed
even kill children, especially if eration of the vehicle. Also, on space, such as a garage, except
they are 12 years of age and hot or sunny days, temperature for the brief time needed to drive
under and are not restrained or in a closed vehicle could quickly the vehicle in or out of it.
improperly restrained. Because become high enough to cause
children are lighter and weaker severe or possibly fatal injuries . Avoid remaining in a parked
than adults, their risk of being to them. vehicle for a lengthy time while
injured from deployment is great- the engine is running. If that is
er. For instructions and precautions, carefully unavoidable, then use the venti-
read the following sections. lation fan to force fresh air into
. NEVER INSTALL A REARWARD the vehicle.
FACING CHILD SAFETY SEAT IN . For the seatbelt system, refer to “Seat-
THE FRONT SEAT. DOING SO belts” F1-17. . Always keep the front ventilator
RISKS SERIOUS INJURY OR . For the child restraint system, refer to inlet grille free from snow, leaves
DEATH TO THE CHILD BY PLA- “Child restraint systems” F1-31. or other obstructions to ensure
CING THE CHILD’S HEAD TOO that the ventilation system al-
. For the SRS airbag system, refer to ways works properly.
CLOSE TO THE SRS AIRBAG. “*SRS airbag (Supplemental Restraint
. Always use the child safety locks System airbag)” F1-45. . If at any time you suspect that
whenever a child rides in the exhaust fumes are entering the
rear. Serious injury could result & Engine exhaust gas (carbon vehicle, have the problem
checked and corrected as soon
if a child accidentally opened the monoxide) as possible. If you must drive
door and fell out. Refer to “Child
safety locks” F2-21. under these conditions, drive
WARNING only with all windows fully open.
. Always lock the passenger’s win-
dows using the lock switch when . Never inhale engine exhaust gas. . Keep the rear gate closed while
children are riding in the vehicle. Engine exhaust gas contains driving to prevent exhaust gas
Failure to follow this procedure carbon monoxide, a colorless from entering the vehicle.
could result in injury to a child and odorless gas which is dan-
operating the power window. Re- gerous, or even lethal, if inhaled.
fer to “Power windows” F2-21. . Always properly maintain the en-
7
& Drinking and driving & Drugs and driving & Driving when tired or sleepy
WARNING WARNING WARNING
Drinking and then driving is very There are some drugs (over the When you are tired or sleepy, your
dangerous. Alcohol in the blood- counter and prescription) that can reaction will be delayed and your
stream delays your reaction and delay your reaction time and impair perception, judgment and attentive-
impairs your perception, judgment your perception, judgment and at- ness will be impaired. If you drive
and attentiveness. If you drive after tentiveness. If you drive after taking when tired or sleepy, your, your
drinking - even if you drink just a them, it may increase your, your passengers’ and other persons’
little - it will increase the risk of passengers’ and other persons’ risk chances of being involved in a
being involved in a serious or fatal of being involved in a serious or serious accident may increase.
accident, injuring or killing yourself, fatal accident.
your passengers and others. In Please do not continue to drive but
addition, if you are injured in the If you are taking any drugs, check with instead find a safe place to rest if you
accident, alcohol may increase the your doctor or pharmacist or read the are tired or sleepy. On long trips, you
severity of that injury. literature that accompanies the medication should make periodic rest stops to refresh
Please don’t drink and drive. to determine if the drug you are taking can yourself before continuing on your journey.
impair your driving ability. Do not drive When possible, you should share the
Drunken driving is one of the most after taking any medications that can driving with others.
frequent causes of accidents. Since alco- make you drowsy or otherwise affect your
hol affects all people differently, you may ability to safely operate a motor vehicle. If
have consumed too much alcohol to drive you have a medical condition that requires
safely even if the level of alcohol in your you to take drugs, please consult with
blood is below the legal limit. The safest your doctor.
thing you can do is never drink and drive. Never drive if you are under the influence
However if you have no choice but to of any illicit mind-altering drugs. For your
drive, stop drinking and sober up comple- own health and well-being, we urge you
tely before getting behind the wheel. not to take illegal drugs in the first place
and to seek treatment if you are addicted
to those drugs.
– CONTINUED –
8
& Car phone/cell phone and & Driving a vehicle equipped handle. Never restrain pets or pet carriers
driving with a navigation system in the front passenger’s seat. For further
information, consult your veterinarian,
CAUTION WARNING local animal protection society or pet
shop.
Do not use a car phone/cell phone Do not allow the monitor to distract
while driving; it may distract your your attention from driving. Also, do & Tire pressures
attention from driving and can lead not operate the controls of the
to an accident. If you use a car navigation system while driving. WARNING
phone/cell phone, pull off the road The loss of attention to driving
and park in a safe place before could lead to an accident. If you Driving at high speeds with exces-
using your phone. In some States/ wish to operate the controls of the sively low tire pressures can cause
Provinces, only hands-free phones navigation system, first take the the tires to deform severely and to
may legally be used while driving. vehicle off the road and stop it in a rapidly become hot. A sharp in-
safe place. crease in temperature could cause
tread separation, and destruction of
& Modification of your vehicle the tires. The resulting loss of
& Driving with pets vehicle control could lead to an
CAUTION accident.
Unrestrained pets can interfere with your
driving and distract your attention from Check and, if necessary, adjust the
Your vehicle should not be modified driving. In a collision or sudden stop,
other than with genuine SUBARU pressure of each tire (including the spare)
unrestrained pets or cages can be thrown at least once a month and before any long
parts and accessories. Other types around inside the vehicle and hurt you or
of modifications could affect its journey.
your passengers. Besides, the pets can
performance, safety or durability, be hurt under these situations. It is also for Check the tire pressure when the tires are
and may even violate governmental their own safety that pets should be cold. Use a pressure gauge to adjust the
regulations. In addition, damage or properly restrained in your vehicle. Re- tire pressures to the values shown on the
performance problems resulting strain a pet with a special traveling tire placard. For detailed information, refer
from modification may not be cov- harness which can be secured to the rear to “Tires and wheels” F11-23.
ered under warranties. seat with a seatbelt or use a pet carrier
which can be secured to the rear seat by
routing a seatbelt through the carrier’s
9
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
Table of contents
– CONTINUED –
14
– CONTINUED –
16
1) Select lever (page 7-13)
2) Hazard warning flasher switch
(page 3-5)
3) Multi function display (page 3-23)
4) Glove box (page 6-6)
5) Audio (page 5-1)
6) Climate control (page 4-1)
7) Cup holder (page 6-8)
17
– CONTINUED –
18
& Light control and wiper control levers/switches 1) Parking light switch (page 3-31)
2) Windshield wiper (page 3-32)
3) Mist (page 3-33)
4) Windshield washer (page 3-34)
5) Rear window wiper and washer switch
(page 3-34)
6) Wiper intermittent time control switch
(page 3-33)
7) Wiper control lever (page 3-33)
8) Light control switch (page 3-26)
9) Fog light switch (page 3-31)
10) Headlight ON/OFF (page 3-26)
11) Headlight flasher High/Low beam
change (page 3-27)
12) Turn signal (page 3-28)
19
– CONTINUED –
20
& Warning and indicator lights Mark Name Page Mark Name Page
Mark Name Page Low fuel warning light 3-17 Cruise control set indica- 3-21
tor light
Driver’s seatbelt warning 3-10
light Low tire pressure warn-
AWD warning light 3-18 ing light 3-14
Front passenger’s seat- 3-10
belt warning light Vehicle Dynamics Con- Passenger airbag ON in-
trol operation indicator 3-18 dicator light 3-12
light
SRS airbag system 3-11
warning light Vehicle Dynamics Con- Passenger airbag OFF
trol warning light/Traction indicator light 3-12
Control system OFF in- 3-18
CHECK ENGINE warn-
ing light/Malfunction indi- 3-12 dicator light
cator lamp SPORT mode indicator 3-20
light
Security indicator light 3-19
Charge warning light 3-13
Windshield washer fluid 3-18
Turn signal indicator warning light
lights 3-20
Oil pressure warning light 3-13
Rear differential oil tem- 3-14
perature warning light
High beam indicator light 3-20
AT OIL TEMP warning 3-13
light
Front fog light indicator 3-21
light
/ ABS warning light 3-15
– CONTINUED –
22
Function settings
A SUBARU dealer can change the settings of the functions shown in the following table to meet your personal requirements. Contact
the nearest SUBARU dealer for details. If your vehicle is equipped with the genuine SUBARU navigation system, the settings for some
of these functions can be changed using the navigation monitor. For details, please refer to the Owner’s Manual supplement for the
navigation system.
Item Function Possible settings Default setting Page
Alarm system Alarm system Operation/Non-operation Operation 2-16
Monitoring start delay time (after closure of doors) 0 second/30 seconds 30 seconds 2-17
Impact sensor operation (only models with shock Operation/Non-operation Non-operation 2-20
sensors (dealer option))
Passive arming Operation/Non-operation Non-operation 2-19
Dome light/map lights illumination ON/OFF OFF 2-16
Remote keyless entry sys- Hazard warning flasher Operation/Non-operation Operation 2-8
tem
Audible signal Operation/Non-operation Operation 2-11
Key lock-in prevention Key lock-in prevention Operation/Non-operation Operation 2-7
Remote engine start system Horn chirp confirmation ON/OFF ON 7-10
(dealer option)
Rear window defogger Rear window defogger Operation for 15 minutes/ Operation for 15 minutes 3-36
Continuous operation
Windshield wiper deicer Windshield wiper deicer Operation for 15 minutes/ Operation for 15 minutes 3-35
Continuous operation
Map lights/Dome light Operation of map lights/dome light OFF delay OFF/Short/Normal/Long Normal 6-2/6-3
timer
Map lights Illumination in conjunction with a door open Operation/Non-operation Operation 6-3
(Illumination - ON)
Battery drainage prevention Battery drainage prevention function Operation/Non-operation Operation 2-6
function
– CONTINUED –
24
TOO CLOSE TO THE SRS AIRBAG. NOTE serious internal injury or death.
According to accident statistics, During backward-forward adjustment
children are safer when properly of the seat, you cannot adjust the seat
restrained in the rear seating posi- cushion angle or seat height.
tions than in the front seating posi-
! Reclining the seatback
tions. For instructions and precau-
tions concerning child restraint sys-
tems, refer to “Child restraint sys-
tems” F1-31.
WARNING
. Never adjust the seat while driv-
ing to avoid the possibility of
loss of vehicle control and of
personal injury.
. Before adjusting the seat, make
sure the hands and feet of rear 2. While pressing the “SET” button, press
seat passengers or luggage are the desired button “1” or “2”.
clear of the adjusting mechan- 3. The chime sounds once, and the seat
ism. position is registered.
To adjust the seat height, pull up or push 1. With the select lever in the “P” posi- ! Retrieval of seat position
down the rear end of the control switch. tion, adjust the seat position.
WARNING
& Memory function (driver’s . Never retrieve the seat position
seat – if equipped) while driving to avoid the possi-
Two of your favorite seat positions can be bility of loss of vehicle control
registered. Register the seat position with and of personal injury.
button “1” or “2” and retrieve the seat . Perform the seat position retrie-
position by pressing either button. val before driving. Be sure to
The following seat positions can be confirm that the select lever
registered. position is in the “P” position.
. Forward/backward position of the seat Do not drive until the retrieval of
the seat position is complete.
Seat, seatbelt and SRS airbags 1-5
– CONTINUED –
1-6 Seat, seatbelt and SRS airbags
& Lumbar support Seat heater (if equipped) When the vehicle’s interior is warmed
enough or before you leave the vehicle,
always turn the switch off.
CAUTION
. There is a possibility that people
with delicate skin may suffer
slight burns even at low tempera-
tures if they use the seat heater
for a long period of time. When
using the heater, always be sure
to warn the persons concerned.
. Do not put anything on the seat
which insulates against heat,
Pull the lever forward or backward. such as a blanket, cushion, or
Pulling the lever forward will increase the The seat heater is equipped in the front
seats. similar items. This may cause the
amount of support for your lower back. seat heater to overheat.
Pulling the lever backward will decrease The seat heater operates when the igni-
the amount of support for your lower back. tion switch is in the “ON” position.
NOTE
The seat heater can be adjusted in three Use of the seat heater for a long period
levels. Press the button to activate the of time while the engine is not running
seat heater. Each subsequent press of the can cause battery discharge.
button will reduce the level. Pushing the
button four times or keeping the button
pressed for approximately 1 second will
turn the heater off. While the seat heater is
operating, its operating level is shown by
the number of illuminated indicators. To
warm the seat as quickly as possible, set
the heater with three indicators illumi-
nated.
1-8 Seat, seatbelt and SRS airbags
back and forth to make sure that it is vehicle is in motion. Also, do not
securely locked into place. place objects such as cushions
between the passenger and the
CAUTION seatback. If you do so, the risk of
sliding under the lap belt and of the
If you slide the seat or seat pair aft lap belt sliding up over the abdomen
of the lock point while the third-row will increase, and both can result in
seat is occupied, be careful not to serious internal injury or death.
trap the legs of the third-row pas-
sengers.
CAUTION
& Reclining the seatback . Never allow the third-row seat
When the right seat or the left seat pair is passengers to adjust the seat-
slid rearward, it stops partway at the lock back of the second row. Doing so
point so as not to trap the legs of is dangerous as the seatback will
passengers sitting on the third-row seat. tilt rapidly and could injure the
passengers.
It is possible to slide the seat or seat pair
further rearward by releasing the lock that . If the cargo area cover is
stops it. To do this, simultaneously pull the equipped, be careful not to pinch
lever under the outboard seat cushion and your hand between the headrest
turn the lever on the side of the seat and the cargo area cover when
cushion outward when sliding the seat or you recline the rear seat.
seat pair.
Once you have released the lock, you can
slide the seat or seat pair back and forth
with only the lever under the seat cushion
pulled. If you slide the seat or seat pair WARNING
forward of the lock point, you will need to To prevent the passenger from slid-
release the lock again before you can ing under the seatbelt in the event of
slide it behind the point. a collision, always put the seatback
Then release the lever and move the seat in the upright position while the
– CONTINUED –
1-10 Seat, seatbelt and SRS airbags
rapid acceleration.
. If passengers are sitting on the
third-row seat, never drive while
folding the second-row seat. It
can be a serious interference at
the time of braking and impact.
. If passengers are sitting on the
third-row seat, never drive while
the center seatback of the sec-
ond-row seat is folded. Doing so
may result in serious injury in the
event of hard braking or an
impact.
Pull the lever up and adjust the seatback 1. Slide the seat or seat pair to its
to the desired position. . When you return the seatback to rearmost position.
Then release the lever and make sure the its original position, shake the
2. Lower the head restraint to its lowest
seatback is securely locked into place. seatback slightly to confirm that
position. Refer to “Head restraint adjust-
it is securely fixed in place. If the
ment” F1-12.
& Folding down the seatback seatback is not securely fixed in
place, the seatback may sud- 3. Unlock the seatback by pulling the
denly fold down in the event of lever and then fold the seatback down.
WARNING sudden braking or objects may 4. To return the seatback to its original
move out from the cargo area, position, raise the seatback until it locks
. Never allow passengers to ride into place. Make sure it is securely locked.
on the folded seatback or in the which could cause serious injury
cargo area. Doing so may result or death.
in serious injury or death. . After returning the seatback to its
. Secure skis and other long items original position, be sure to place
properly to prevent them from all of the seatbelts and the tab
being thrown around inside the attached to the seat cushion
vehicle and causing serious in- above the seat cushion. And
jury during a sudden stop, a make certain that the shoulder
sudden steering maneuver or a belts are fully visible.
Seat, seatbelt and SRS airbags 1-11
NOTE
– CONTINUED –
1-12 Seat, seatbelt and SRS airbags
CAUTION
The head restraint is not intended to
be used at the lowest position.
Before sitting on the seat, raise the
head restraint to an appropriate
position depending on your sitting A) When not used (retracted position)
height. B) When used (extended position)
1) Head restraint
2) Release button
Seat, seatbelt and SRS airbags 1-13
1) Head restraint
2) Release button
To lower the armrest, pull on the strap of
To raise: the armrest.
Pull the head restraint up.
WARNING
To lower: WARNING Seatbelts provide maximum re-
Push the head restraint down while To avoid the possibility of serious straint when the occupant sits well
pressing the release button on the top of injury, passengers must never be back and upright in the seat. Do not
the seatback. allowed to sit on the center armrest put cushions or any other materials
while the vehicle is in motion. between occupants and seatbacks
The head restraint should be adjusted so or seat cushions. If you do so, the
that the center of the head restraint is risk of sliding under the lap belt and
closest to the top of the occupant’s ears. of the lap belt sliding up over the
When the center seat is not occupied, abdomen will increase, and both can
lower the head restraint to improve rear- result in serious internal injury or
ward visibility. death.
– CONTINUED –
1-14 Seat, seatbelt and SRS airbags
to move. Do not drive the vehicle Before driving the vehicle, adjust the fore/
with the seat in this state or allow aft position of the second-row seat, raise
anyone to sit on the seat unless it is the seatback, and make sure the seatback
completely locked. Doing so may is securely locked in position.
result in serious injury or death. ! To get out from the third-row seat
CAUTION
When getting into or out of the third-
row seat, make sure the second-row
seat is in the completely slid-for-
ward position and be sure to watch
your step.
WARNING
! To access the third-row seat
Never stack luggage or other cargo
higher than the top of the seatback
because it could tumble forward and
injure passengers in the event of a Raise the lever from the third-row seat.
sudden stop or accident. The seatback of the second-row seat will
tip forward and the seat will slide forward.
Before driving the vehicle, adjust the fore/
& Access to the third-row seat aft position of the second-row seat, raise
There are levers on both sides of the the seatback, and make sure the seatback
second-row seat. Each lever is used to is securely locked in position.
facilitate access to the third-row seat.
WARNING
In its slid-forward position with the Raise the lever. The seatback of the
seatback tipped forward, the sec- second-row seat will tip forward and the
ond-row seat is not locked and free seat will slide forward.
Seat, seatbelt and SRS airbags 1-15
& Folding down the seatback belts are fully visible. NOTE
WARNING
. Never allow passengers to ride
on the folded seatback or in the
cargo area. Doing so may result
in serious injury or death.
. Secure skis and other long items
properly to prevent them from
being thrown around inside the
vehicle and causing serious in-
jury during a sudden stop, a
sudden steering maneuver or a
rapid acceleration.
Place the head restraint in its lowest 1) Holder
. When you return the seatback to
its original position, shake the position, pull up the lever to release the
seatback lock, and fold down the seat- . Before folding or raising the seat-
seatback slightly to confirm that back of the third-row seat, confirm that
it is securely fixed in place. If the back. Refer to “Head restraint adjustment”
F1-16. the seatbelt is flat against the sidewall
seatback is not securely fixed in at the lower point and the webbing is
place, the seatback may sud- To return the seatback to its original
attached to the holder.
denly fold down in the event of position, raise the seatback until it locks
. When raising the seatback of the
sudden braking or objects may into place. Make sure it is securely locked.
third-row seat, if the seatbelt catches
move out from the cargo area, on the seatback, hold the belt forward
which could cause serious injury of the seatback while latching the
or death. seatback.
. After returning the seatback to its
original position, be sure to place
all of the seatbelts and the tab
attached to the seat cushion
above the seat cushion. And
make certain that the shoulder
– CONTINUED –
1-16 Seat, seatbelt and SRS airbags
1) Head restraint
2) Release button
To raise:
Pull the head restraint up.
Seat, seatbelt and SRS airbags 1-17
– CONTINUED –
1-18 Seat, seatbelt and SRS airbags
the face or neck, adjust the shoulder belt & Emergency Locking Retrac- Retractor (ALR) mode.
anchor height (window-side seating posi- tor (ELR) When the child restraint system is re-
tions only) and then if necessary move the moved, make sure that the retractor is
child closer to the belt buckle to help The driver’s seatbelt has an Emergency
Locking Retractor (ELR). restored to the Emergency Locking Re-
provide a good shoulder belt fit. Care must tractor (ELR) mode by allowing the seat-
be taken to securely place the lap belt as The emergency locking retractor allows belt to retract fully.
low as possible on the hips and not on the normal body movement but the retractor
locks automatically during a sudden stop, For instructions on how to convert the
child’s waist. If the shoulder portion of the retractor to the ALR mode and restore it to
belt cannot be properly positioned, a child impact or if you pull the belt very quickly
out of the retractor. the ELR mode, refer to “Installing child
restraint system should be used. Never restraint systems with A/ELR seatbelt”
place the shoulder belt under the child’s F1-34.
arm or behind the child’s back. & Automatic/Emergency Lock-
! Expectant mothers
ing Retractor (A/ELR) & Seatbelt warning light
Each passenger’s seatbelt has an Auto- and chime
matic/Emergency Locking Retractor (A/
ELR). The Automatic/Emergency Locking Your vehicle is equipped with a seatbelt
Retractor normally functions as an Emer- warning device at the driver’s and front
gency Locking Retractor (ELR). The A/ passenger’s seat.
ELR has an additional locking mode With the ignition switch turned to the “ON”
“Automatic Locking Retractor (ALR) position, this device reminds the driver
mode” intended to secure a child restraint and front passenger to fasten their seat-
system. When the seatbelt is once drawn belts by illuminating the warning lights in
out completely and is then retracted even the locations indicated in the following
slightly, the retractor locks the seatbelt in illustrations and sounding a chime.
that position and the seatbelt cannot be
extended. As the belt is rewinding, clicks
will be heard which indicate the retractor
Expectant mothers also need to use the
functions as ALR. When the seatbelt is
seatbelts. They should consult their doctor
retracted fully, ALR mode is released.
for specific recommendations. The lap belt
should be worn securely and as low as When securing a child restraint system on
possible over the hips, not over the waist. the passengers’ seats, the seatbelt must
be changed over to the Automatic Locking
Seat, seatbelt and SRS airbags 1-19
the ignition switch is turned to the “ON” turned ON next time, however, the
position, the seatbelt warning light(s) will complete sequence of the warning
flash for 6 seconds, to warn that the operation resumes. For further details
seatbelt(s) is/are unfastened. If the dri- about canceling the warning operation,
ver’s seatbelt is not fastened, a chime will please contact your SUBARU dealer.
also sound simultaneously. If there is no passenger on the front
NOTE passenger’s seat, the seatbelt warning
device for the front passenger’s seat will
. If the driver’s and/or front passen- be deactivated. The front passenger’s
ger’s seatbelt(s) is/are still not fastened occupant detection system monitors
6 seconds later, the seatbelt warning whether or not there is a passenger on
device operates as follows according the front passenger’s seat.
to the vehicle speed.
Driver’s warning light
Observe the following precautions. Failure
. At speeds lower than approxi-
to do so may prevent the device from
mately 9 mph (15 km/h)
functioning correctly or cause the device
The warning light(s) for unfastened
to fail.
seatbelt(s) will alternate between
steady illumination and flashing at . Do not install any accessory such as a
15-second intervals. The chime will table or TV onto the seatback.
not sound. . Do not store a heavy load in the
. At speeds higher than approxi- seatback pocket.
mately 9 mph (15 km/h) . Do not allow the second-row seat
The warning light(s) for unfastened occupant to place his/her hands or legs
seatbelt(s) will alternate between on the front passenger’s seatback, or
flashing and steady illumination at allow him/her to pull the seatback.
15-second intervals and the chime
If the seatbelt warning device for the front
will sound while the warning light(s)
passenger’s seat does not function cor-
Front passenger’s warning light is/are flashing.
rectly (e.g., it is activated even when the
. It is possible to cancel the warning
! Operation front passenger’s seat is empty or it is
operation that follows the 6-second
If the driver and/or front passenger have/ deactivated even when the front passen-
warning after turning ON the ignition
has not yet fastened the seatbelt(s) when ger has not fastened his/her seatbelt),
switch. When the ignition switch is
take the following actions.
– CONTINUED –
1-20 Seat, seatbelt and SRS airbags
! Front seatbelts 4. Insert the tongue plate into the buckle ! Adjusting the front seat shoulder
until you hear a click. belt anchor height
1. Adjust the seat position according to
the following procedure.
Driver’s seat: Adjust the seatback to the
upright position. Move the seatback as far
from the steering wheel as practical while
still maintaining full vehicle control.
Front passenger’s seat: Adjust the seat-
back to the upright position. Move the seat
as far back as possible.
2. Sit well back in the seat.
3. Pick up the tongue plate and pull the
belt out slowly. Do not let it get twisted. If
the belt stops before reaching the buckle,
return the belt slightly and pull it out more 5. To make the lap part tight, pull up on The shoulder belt anchor height should be
slowly. If the belt still cannot be unlocked, the shoulder belt. adjusted to the position best suited for the
let the belt retract slightly after giving it a 6. Place the lap belt as low as possible driver/front passenger. Always adjust the
strong pull, then pull it out slowly again. on your hips, not on your waist. anchor height so that the shoulder belt
passes over the middle of the shoulder
without touching the neck.
To raise:
Slide the anchor up.
To lower:
Push the release button and slide the
anchor down.
Pull down on the anchor to make sure that
it is locked in place.
– CONTINUED –
1-22 Seat, seatbelt and SRS airbags
1) Holder
The shoulder belt anchor height should be
adjusted to the position best suited for the With the seatback folded, attach the
passenger. Always adjust the anchor tongue plate of each rear/second-row
height so that the shoulder belt passes seatbelt to the corresponding holder.
over the middle of the shoulder without Do the same also before someone gets
touching the neck. into the third-row seat.
To raise:
Slide the anchor up.
To lower:
Push the release button and slide the Push the button on the buckle.
anchor down.
Before closing the door, make sure that
Pull down on the anchor to make sure that the belts are retracted properly to avoid
it is locked in place. catching the belt webbing in the door.
– CONTINUED –
1-24 Seat, seatbelt and SRS airbags
2. Pull out the seatbelt slowly from the 5. To make the lap part tight, pull up on
overhead retractor. the shoulder belt. And place the lap belt as
low as possible on your hips, not on your
waist.
Push the release button of the center it in, and the connector (tongue) plate will
seatbelt buckle (on the left-hand side) to disconnect from the buckle.
unfasten the seatbelt.
CAUTION
2. With the belt held by hand, allow the . Do not allow the retractor to roll
retractor to roll up the belt slowly. You up the seatbelt too quickly.
should hold the webbing end and guide it Otherwise, the metal tongue
back into the retractor while it is rolling up. plates may hit against the trim,
Neatly store the tongue plate in the recess resulting in damaged trim.
on the ceiling and then insert the con-
nector (tongue) plate into the slot located . Have the seatbelt fully rolled up
at the front of the recess. so that the tongue plates are
neatly stored. A hanging tongue
plate can swing and hit against
the trim during driving, causing
damage to the trim.
– CONTINUED –
1-28 Seat, seatbelt and SRS airbags
& Seatbelt maintenance Front seatbelt pretensioners restrains the front seat occupant.
To clean the seatbelts, use a mild soap When a seatbelt pretensioner is activated,
and lukewarm water. Never bleach or dye an operating noise will be heard and a
the belts because this could seriously small amount of smoke will be released.
affect their strength. These occurrences are normal and not
Inspect the seatbelts and attachments harmful. This smoke does not indicate a
including the webbing and all hardware fire in the vehicle.
periodically for cracks, cuts, gashes, Once the seatbelt pretensioner has been
tears, damage, loose bolts or worn areas. activated, the seatbelt retractor remains
Replace the seatbelts even if only minor locked. Consequently, the seatbelt can not
damage is found. be pulled out and retracted and therefore
must be replaced.
CAUTION
NOTE
. Keep the belts free of polishes, . Seatbelt pretensioners are not de-
oils, chemicals and particularly The driver’s and front passenger’s seat-
belts have a seatbelt pretensioner. The signed to activate in minor frontal
battery acid. impacts, in minor side impacts or rear
seatbelt pretensioners for the driver’s seat
. Never attempt to make modifica- and front passenger’s seat operate at the impacts.
tions or changes that will prevent same time as the frontal, and side SRS . The seatbelt pretensioners for the
the seatbelt from operating prop- airbags. If the vehicle rolls over, they driver’s seat and front passenger’s
erly. operate simultaneously with the curtain seat operate at the same time as the
airbag. frontal, and side SRS airbags. If the
vehicle rolls over, they operate simul-
The front and side airbag sensors and the taneously with the curtain airbag.
rollover sensor are used as the preten- . Pretensioners are designed to func-
sioner sensors. If a sensor detects a tion on a one-time-only basis. In the
certain predetermined amount of force event that a pretensioner is activated,
during a frontal collision, a side impact both the driver’s and front passenger’s
collision or a rollover collision of the seatbelt retractor assemblies must be
vehicle, the front seatbelt is quickly drawn replaced and only by an authorized
back in by the retractor to take up the SUBARU dealer. When replacing seat-
slack so that the belt more effectively
Seat, seatbelt and SRS airbags 1-29
belt retractor assemblies, use only viceable parts. For required ser- module with the airbag system. Therefore,
genuine SUBARU parts. vicing of front seatbelt retractors if any malfunction occurs in a seatbelt
. If either front seatbelt does not equipped with seatbelt preten- pretensioner, the SRS airbag system
retract or cannot be pulled out due to s i o n e r s, s e e y o u r n e a r e s t warning light will illuminate. The SRS
a malfunction or activation of the SUBARU dealer. airbag system warning light will show
pretensioner, contact your SUBARU . When discarding front seatbelt normal system operation by lighting for
dealer as soon as possible. retractor assemblies or scrap- approximately 6 seconds when the igni-
. If the front seatbelt retractor assem- ping the entire vehicle due to tion switch is turned to the “ON” position.
bly or surrounding area has been collision damage or for other
damaged, contact your SUBARU dealer The following components are monitored
reasons, consult your SUBARU by the indicator.
as soon as possible. dealer.
. When you sell your vehicle, we urge . Front sub sensor (right-hand side)
you to explain to the buyer that it has . Front sub sensor (left-hand side)
seatbelt pretensioners by alerting him & System monitors . Airbag control module (including im-
to the contents of this section. pact and rollover sensors)
. Frontal airbag module (driver’s side)
WARNING . Frontal airbag module (front passen-
ger’s side)
. To obtain maximum protection, . Side airbag sensor (center pillar right-
occupants should sit in an up- hand side)
right position with their seatbelts
properly fastened. Refer to “Seat- . Side airbag sensor (center pillar left-
belts” F1-17. hand side)
. Side airbag module (driver’s side)
. Do not modify, remove or strike
the front seatbelt retractor as- . Side airbag module (front passenger’s
semblies or surrounding area. side)
This could result in accidental . Curtain airbag sensor (rear wheel
activation of the seatbelt preten- house right-hand side)
SRS airbag system warning light
sioners or could make the sys- . Curtain airbag sensor (rear wheel
A diagnostic system continually monitors house left-hand side)
tem inoperative, possibly result-
the readiness of the seatbelt pretensioner
ing in serious injury. Seatbelt . Curtain airbag module (right-hand side)
while the vehicle is being driven. The
pretensioners have no user-ser- . Curtain airbag module (left-hand side)
seatbelt pretensioners share the control
– CONTINUED –
1-30 Seat, seatbelt and SRS airbags
. Satellite safing sensor (under the sec- SRS airbags may inflate in a very trical test equipment on any
ond-row center seat) minor collision or not inflate in a circuit related to the seatbelt
. Seatbelt pretensioner (driver’s side) severe collision), which may in- pretensioner and airbag sys-
. Seatbelt pretensioner (front passen- crease the risk of injury. tems. For required servicing of
ger’s side) . Flashing or flickering of the warn- the seatbelt pretensioner, see
. Seatbelt buckle switch (driver’s side) ing light your nearest SUBARU dealer.
. Seatbelt buckle switch (front passen- . No illumination of the warning
ger’s side) light when the ignition switch is CAUTION
. Driver’s seat position sensor first turned to the “ON” position
. Front passenger’s seatbelt tension . Continuous illumination of the The front sub sensors are located
sensor warning light on both sides of the radiator panel,
. Front passenger’s occupant detection and the airbag control module in-
. Illumination of the warning light
system weight sensor cluding the impact sensors is lo-
while driving
. Front passenger’s occupant detection cated under the center console. If
control module you need service or repair in those
areas or near the front seatbelt
. Front passenger’s frontal airbag ON & System servicing retractors, we recommend that you
and OFF indicator
have an authorized SUBARU dealer
. All related wiring WARNING perform the work.
WARNING . When discarding a seatbelt re-
tractor assembly or scrapping NOTE
If the warning light exhibits any of the entire vehicle damaged by a
the following conditions, there may If the front part of the vehicle is
collision, consult your SUBARU damaged in an accident to the extent
be a malfunction in the seatbelt dealer.
pretensioners and/or SRS airbag that the seatbelt pretensioner does not
. Tampering with or disconnecting operate, contact your SUBARU dealer
system. Immediately take your vehi- the system’s wiring could result
cle to your nearest SUBARU dealer as soon as possible.
in accidental activation of the
to have the system checked. Unless seatbelt pretensioner and/or air-
checked and properly repaired, the bag or could make the system
seatbelt pretensioners and/or SRS inoperative, which may result in
airbags will operate improperly (e.g. serious injury. Do not use elec-
Seat, seatbelt and SRS airbags 1-31
& Precautions against vehicle Child restraint systems tether anchorages (LATCH)” F1-38).
modification Children could be endangered in an
Always consult your SUBARU dealer if accident if their child restraints are not
you want to install any accessory parts to properly secured in the vehicle. When
your vehicle. installing the child restraint system, care-
fully follow the manufacturer’s instructions.
CAUTION
According to accident statistics, children
Do not perform any of the following are safer when properly restrained in the
modifications. Such modifications rear seating positions than in the front
can interfere with proper operation seating positions.
of the seatbelt pretensioners.
All U.S. states and Canadian provinces
. Attachment of any equipment require that infants and small children be
(bush bar, winches, snow plow, restrained in an approved child restraint
skid plate, etc.) other than genu- system at all times while the vehicle is
ine SUBARU accessory parts to While riding in the vehicle, infants and
moving.
the front end. small children should always be placed in
an infant or child restraint system in one of
. Modification of the suspension
the rear seating positions recommended
system or front end structure.
in this Owner’s Manual.
. Installation of a tire of different
size and construction from the You should use an infant or child restraint
tires specified on the vehicle system that meets Federal Motor Vehicle
placard attached to the door Safety Standards or Canada Motor Vehi-
pillar or specified for individual cle Safety Standards, is compatible with
vehicle models in this Owner’s your vehicle and is appropriate for the
Manual. child’s age and size.
All child restraint systems are designed to
be secured in vehicle seats by lap belts or
the lap belt portion of a lap/shoulder belt
(except those described in “Installation of
child restraint systems by use of lower and
– CONTINUED –
1-32 Seat, seatbelt and SRS airbags
WARNING WARNING
Never let a passenger hold a child Children should be properly re-
on his or her lap while the vehicle is strained at all times. Never allow a
moving. The passenger cannot pro- child to stand up, or to kneel on any
tect the child from injury in a colli- seat. Unrestrained children will be
sion, because the child will be thrown forward during sudden stop
caught between the passenger and or in an accident and can be injured
objects inside the vehicle. Addition- seriously.
ally, holding a child in your lap or Additionally, children standing up or
arms in the front seat exposes that kneeling on or in front of the front
child to another serious danger. seat are exposed another serious
Since the SRS airbag deploys with danger. Since the SRS airbag de-
considerable speed and force, the A: Front passenger’s seat
ploys with considerable speed and
child could be injured or even killed. force, the child could be injured or You should not install a child restraint
even killed. system (including a booster seat) due to
the hazard to children posed by the
passenger’s airbag.
& Where to place a child re- B: Second-row outboard seats
straint system Recommended positions for all types of
The following are SUBARU’s recommen- child restraint systems.
dations on where to place a child restraint In these positions, Automatic/Emergency
system in your vehicle. Locking Retractor (A/ELR) seatbelts and
lower anchorages (bars) are provided for
installing a child restraint system.
Some types of child restraints might not be
able to be secured firmly due to projection
of the seat cushion.
In this seating position, you should use
only a child restraint system that has a
bottom base that fits snugly against the
Seat, seatbelt and SRS airbags 1-33
contours of the seat cushion and can be In this seating position, you should use
securely retained using the seatbelt. only a child restraint system that has a
bottom base that fits snugly against the
C: Second-row center seat contours of the seat cushion and can be
Installing a child restraint system is not securely retained using the seatbelt.
recommended, although the A/ELR seat-
belt and an upper anchorage (tether WARNING
anchorage) are provided in this position.
Some types of child restraints might not be Put children aged 12 and under in
able to be secured firmly due to projection the rear seat properly restrained at
of the seat cushion. all times. The SRS airbag deploys
In this seating position, you should use with considerable speed and force
only a child restraint system that has a and can injure or even kill children,
bottom base that fits snugly against the especially if they are 12 years of age
contours of the seat cushion and can be and under and are not restrained or WARNING
securely retained using the seatbelt. improperly restrained. Because chil-
dren are lighter and weaker than SINCE YOUR VEHICLE IS
D: Third-row seat adults, their risk of being injured EQUIPPED WITH A PASSENGER’S
Installing a child restraint system is not from deployment is greater. SRS AIRBAG, DO NOT INSTALL A
recommended, although the A/ELR seat- Consequently, be sure to secure R E A R WA R D F A C I N G C H I L D
belt and two upper anchorages (tether ALL types of child restraint devices SAFETY SEAT IN THE FRONT PAS-
anchorages) are provided in these posi- (including forward facing child SENGER’S SEAT. DOING SO RISKS
tions. seats) in the REAR seats at all times. SERIOUS INJURY OR DEATH TO
These seating positions are not equipped You should choose a restraint de- THE CHILD BY PLACING THE
with lower anchorages (bars) for installing vice which is appropriate for the CHILD’S HEAD TOO CLOSE TO
LATCH system-type child restraints. How- child’s age, height and weight. Ac- THE SRS AIRBAG.
ever, child restraint devices can be used in cording to accident statistics, chil-
these position using the A/ELR seatbelts dren are safer when properly re-
and upper anchorages (tether an- strained in the rear seating posi-
chorages) provided. tions than in the front seating posi-
Some types of child restraints might not be tions.
able to be secured firmly due to projection
of the seat cushion.
– CONTINUED –
1-34 Seat, seatbelt and SRS airbags
& Choosing a child restraint & Installing child restraint sys- child suffering personal injury in the
system tems with A/ELR seatbelt event of an accident may be in-
creased.
WARNING
! Installing a rearward facing child
. Child restraint systems and seat- restraint
belts can become hot in a vehicle
that has been closed up in sunny
weather; they could burn a small
child. Check the child restraint
system before you place a child
in it.
. Do not leave an unsecured child
restraint system in your vehicle.
Unsecured child restraint sys-
Choose a child restraint system that is tems can be thrown around in-
appropriate for the child’s age and size side of the vehicle in a sudden
(weight and height) in order to provide the stop, turn or accident; they can
child with proper protection. The child strike and injure vehicle occu-
restraint system should meet all applic- pants as well as result in serious
1. Slide the seat or seat pair to its
able requirements of Federal Motor Vehi- injuries or death to the child.
rearmost position.
cle Safety Standards for United States or
2. Adjust the seatback to the upright
Canada Motor Vehicle Safety Standards
CAUTION position.
for Canada. It can be identified by looking
for the label on the child restraint system 3. Place the child restraint system in the
When you install a child restraint rear seating position.
or the manufacturer’s statement of com-
system, follow the manufacturer’s 4. Run the lap and shoulder belt through
pliance in the document attached to the
instructions supplied with it. After or around the child restraint system
system. Also it is important for you to
installing the child restraint system, following the instructions provided by its
make sure that the child restraint system
check to ensure that it is held manufacturer.
is compatible with the vehicle in which it
securely in position. If it is not held 5. Insert the tongue plate into the buckle
will be used.
tight and secure, the danger of your until you hear a click.
Seat, seatbelt and SRS airbags 1-35
6. Take up the slack in the lap belt. 8. Push and pull the child restraint 10. To remove the child restraint system,
7. Pull out the seatbelt fully from the system forward and from side to side to press the release button on the seatbelt
retractor to change the retractor over from check if it is firmly secured. buckle and allow the belt to retract
the Emergency Locking Retractor (ELR) Sometimes a child restraint can be more completely. The belt will return to the
to the Automatic Locking Retractor (ALR) firmly secured by pushing it down into the ELR mode.
mode. Then, allow the belt to rewind into seat cushion and then tightening the
the retractor. As the belt is rewinding, seatbelt. WARNING
clicks will be heard which indicate the 9. Pull at the shoulder portion of the belt
retractor functions as ALR. to confirm that it cannot be pulled out (ALR NEVER INSTALL A REARWARD FA-
properly functioning). CING CHILD SEAT IN THE FRONT
PASSENGER’S SEAT. DOING SO
RISKS SERIOUS INJURY OR DEATH
TO THE CHILD BY PLACING THE
CHILD’S HEAD TOO CLOSE TO THE
SRS AIRBAG.
– CONTINUED –
1-36 Seat, seatbelt and SRS airbags
CAUTION
When you install a child restraint
system, follow the manufacturer’s The lower anchorages (bars) are used for
instructions supplied with it. After installing a child restraint system only on
installing the child restraint system, the window-side seating positions. For
check to ensure that it is held each window-side seating position, two
securely in position. If it is not held lower anchorages are provided.
tight and secure, the danger of your
Each lower anchorage is located where
child suffering personal injury in the
the seat cushion meets the seatback.
event of an accident may be in-
creased.
Each lower anchorage is located where cushion and seatback a little wider to
the seat cushion meets the seatback. locate the two anchorages (bars) for the
position where you want to install the child
CAUTION restraint system.
When you install a child restraint
system, follow the manufacturer’s
instructions supplied with it. After
installing the child restraint system,
check to ensure that it is held
securely in position. If it is not held
tight and secure, the danger of your
child suffering personal injury in the
event of an accident may be in-
The tether anchorages (upper an-
creased.
chorages) are provided for all the seating
positions of the second-row seat.
system manufacturer.
Since a top tether can provide additional
stability by offering another connection
between a child restraint system and the
vehicle, we recommend that you use a top
tether whenever one is required or avail-
able.
! Tether anchorage location
! Second-row seat
CAUTION
1. Lower the head restraint to its lowest
Do not route the top tether over the position.
head restraint. It may happen that
the top tether cannot be fastened
tightly.
CAUTION
Be sure to install the top tether with
the head restraint raised to the
highest position. If the head re-
straint is in any of the lower posi-
tions, the top tether will touch the
head restraint and the resulting
slack will prevent its secure installa- 2. Open the lid of the cargo area, then
tion. remove the covers for the anchorages.
– CONTINUED –
1-44 Seat, seatbelt and SRS airbags
CAUTION
Do not pass the top tether under the
head restraint. The top tether will
touch the head restraint and the
resulting slack will prevent its se-
cure installation.
CAUTION
Do not use the top tether with the
head restraint in a raised position,
otherwise the top tether cannot be
fastened tightly.
Seat, seatbelt and SRS airbags 1-45
NOTE
When you sell your vehicle, we urge
you to explain to the buyer that it is
equipped with SRS airbags by alerting
him or her to the applicable section in
this Owner’s Manual.
– CONTINUED –
1-48 Seat, seatbelt and SRS airbags
1) Airbag control module (including impact 5) Front sub sensor (right-hand side)
and rollover sensors) 6) Side airbag module (driver’s side)
2) Frontal airbag module (driver’s side) 7) Side airbag module (front passenger’s
3) Frontal airbag module (front passenger’s side)
side) 8) Side airbag sensor (center pillar left-hand
4) Front sub sensor (left-hand side) side)
Seat, seatbelt and SRS airbags 1-49
WARNING WARNING
Never hold a child on your lap or in The SRS airbag deploys with con-
your arms. The SRS airbag deploys siderable speed and force. Occu-
with considerable force and can pants who are out of proper position
injure or even kill the child. when the SRS airbag deploys could
suffer very serious injuries. Be-
cause the SRS airbag needs enough WARNING
space for deployment, the driver
should always sit upright and well Do not put any objects over the
back in the seat as far from the steering wheel pad and dashboard.
steering wheel as practical while If the SRS frontal airbag deploys,
still maintaining full vehicle control those objects could interfere with its
and the front passenger should proper operation and could be pro-
move the seat as far back as pelled inside the vehicle and cause
possible and sit upright and well injury.
back in the seat.
It is also important to wear your
Seat, seatbelt and SRS airbags 1-51
. Do not apply any strong impact to the SUBARU advanced frontal airbag system. The indicators are located in the center
front passenger’s seat such as by kicking. Have your vehicle inspected at your portion of the instrument panel.
. Do not spill liquid on the front passen- SUBARU dealer. When the ignition switch is turned to the
ger’s seat. If liquid is spilled, wipe it off “ON” position, both the ON and OFF
immediately. NOTE indicators illuminate for 6 seconds during
. Do not remove or disassemble the front The front passenger’s SRS side airbag, which time the system is checked. Follow-
passenger’s seat. SRS curtain airbag and seatbelt pre- ing the system check, both indicators turn
tensioner are not controlled by the off for 2 seconds. After that, one of the
. Do not install any accessory (such as
SUBARU advanced frontal airbag sys- indicators illuminates depending on the
an audio amplifier) other than a genuine
tem. status of the front passenger’s SRS frontal
SUBARU accessory under the front pas-
senger’s seat. airbag determined by the SUBARU ad-
! Passenger’s frontal airbag ON and
. Do not place anything (shoes, umbrel- vanced frontal airbag system monitoring.
OFF indicators
la, etc.) under the front passenger’s seat. If the front passenger’s SRS frontal airbag
. The front passenger’s seat must not be is activated, the passenger’s frontal airbag
used with the head restraint removed. ON indicator will illuminate while the OFF
indicator will remain off.
. Do not leave any article including a
child restraint system on the front passen- If the front passenger’s SRS frontal airbag
ger’s seat or the seatbelt tongue and is deactivated, the passenger’s frontal
buckle engaged when you leave your airbag ON indicator will remain off while
vehicle. the OFF indicator will illuminate.
. Do not place a magnet near the With the ignition switch turned to the “ON”
seatbelt buckle and the seatbelt retractor. position, if both the ON and OFF indica-
tors simultaneously remain illuminated or
If the seatbelt buckle switch and/or front off even after the system check period, the
passenger’s occupant detection system system is malfunctioning. Contact your
have failed, the SRS airbag system : Front passenger’s frontal airbag ON SUBARU dealer immediately for an in-
warning light will illuminate. Have the indicator spection.
system inspected by your SUBARU deal- : Front passenger’s frontal airbag OFF
er immediately if the SRS airbag system indicator
warning light illuminates. The front passenger’s frontal airbag ON
If your vehicle has sustained impact, this and OFF indicators show you the status of
may affect the proper function of the the front passenger’s SRS frontal airbag.
Seat, seatbelt and SRS airbags 1-53
! Conditions in which front passen- WARNING . Do not place any article on the seat
ger’s SRS frontal airbag is not other than the child occupant and a child
activated NEVER INSTALL A REARWARD FA- restraint system.
The front passenger’s SRS frontal airbag CING CHILD SEAT IN THE FRONT . Do not place more than one child on
will not be activated when any of the PASSENGER’S SEAT EVEN IF THE the seat.
following conditions are met regarding the FRONT PASSENGER’S SRS FRON- . Do not install any accessory such as a
front passenger’s seat. TAL AIRBAG IS DEACTIVATED. Be table or TV onto the seatback.
. The seat is empty. sure to install it in one of the rear . Do not store a heavy load in the
seating positions recommended in seatback pocket.
. The seat is equipped with a rearward
this Owner’s Manual in a correct . Do not allow the rear/second-row seat
facing child restraint system and an infant
manner. Also, it is strongly recom- occupant to place his/her hands or legs on
is restrained with it. (See WARNING that
mended that any forward facing the front passenger’s seatback, or allow
follows.)
child seat or booster seat be in- him/her to pull the seatback.
. The seat is equipped with a forward stalled in one of the rear seating
facing child restraint system and a small positions recommended in this
child is restrained with it. (See WARNING ! If the front passenger’s frontal air-
Owner’s Manual, and that even bag ON indicator illuminates and the
that follows.) children who have outgrown a child
. The seat is equipped with a booster OFF indicator turns off even when
restraint system be also seated in a an infant or a small child is in a child
seat and a small child is in the booster REAR seat. This is because children
seat. (See WARNING that follows.) restraint system (including booster
sitting in the front passenger’s seat seat)
. The seat is relieved of the occupant may be killed or severely injured
load for a time exceeding the predeter- should the front passenger’s SRS Turn the ignition switch to the “LOCK”
mined monitoring time period. frontal airbag deploy. REAR seats position if the front passenger’s frontal
. The seat is occupied by a child who are the safest place for children. airbag ON indicator illuminates and the
has outgrown a child restraint system OFF indicator turns off even when an
(See WARNING that follows.) or by a When the front passenger’s seat is occu- infant or a small child is in a child restraint
small adult. pied by a child, observe the following system (including booster seat). Remove
precautions. Failure to do so may increase the child restraint system from the seat. By
. The front passenger’s occupant detec-
the load on the front passenger’s seat, referring to the child restraint manufac-
tion system is malfunctioning.
activating the front passenger’s SRS turer’s recommendations as well as the
frontal airbag even though that seat is child restraint system installation proce-
occupied by a child. dures in the “Child restraint systems” F1-
31 section in this chapter, correctly install
– CONTINUED –
1-54 Seat, seatbelt and SRS airbags
the child restraint system. Turn the ignition frontal airbag is activated (the ON . When a heavy article is placed on the
switch to the “ON” position and make sure indicator remains illuminated while seat.
that the front passenger’s frontal airbag the OFF indicator turns off), take the
ON indicator turns off and the OFF following actions. When the front passenger’s seat is occu-
indicator illuminates. . Ensure that no article is placed on pied by an adult, observe the following
the seat other than the occupant. precautions. Failure to do so may lessen
If the ON indicator still remains illuminated the load on the front passenger’s seat,
while the OFF indicator turns off, take the . Ensure that there is no article left in
the seatback pocket. deactivating the front passenger’s SRS
following actions. frontal airbag despite the fact that the seat
. Ensure that no article is placed on the If the ON indicator still remains illumi- is occupied by an adult.
seat other than the child restraint system nated while the OFF indicator turns off . Do not allow the rear seat occupant to
and the child occupant. despite the fact that the actions noted lift the front passenger’s seat cushion
. Ensure that there is no article left in the above have been taken, seat the child/ using his/her feet.
seatback pocket. small adult in the rear seat and im- . Do not place any article under the front
mediately contact your SUBARU dealer passenger’s seat, or squeeze any article
If the ON indicator still remains illuminated for an inspection. Even if the system from behind and under the seat. This may
while the OFF indicator turns off after has passed the dealer inspection, it is lift the seat cushion.
taking relevant corrective actions de- recommended that on subsequent trips
scribed above, relocate the child restraint . Do not squeeze any article between
the child/small adult always take the the front passenger’s seat and side trim/
system to one of the rear seating positions rear seat.
recommended in this Owner’s Manual and pillar, door or center console box. This
immediately contact your SUBARU dealer Children who have outgrown a child may lift the seat cushion.
for an inspection. restraint system should always wear the
seatbelt irrespective of whether the airbag ! If the passenger’s frontal airbag OFF
NOTE is deactivated or activated. indicator illuminates and the ON
When a child who has outgrown a child ! Conditions in which front passen- indicator turns off even when the
restraint system or a small adult is ger’s SRS frontal airbag is activated front passenger’s seat is occupied
seated in the front passenger’s seat, by an adult
The front passenger’s SRS frontal airbag
the SUBARU advanced frontal airbag will be activated for deployment upon This can be caused by the adult incor-
system may or may not activate the impact when any of the following condi- rectly sitting in the front passenger’s seat.
front passenger’s SRS frontal airbag tions is met regarding the front passen- Turn the ignition switch to the “LOCK”
depending on the occupant’s seating ger’s seat. position. Ask the front passenger to set
posture. If the front passenger’s SRS the seatback to the upright position, sit up
. When the seat is occupied by an adult.
Seat, seatbelt and SRS airbags 1-55
straight in the center of the seat cushion, ! Effect vehicle modifications made <Guam>
correctly fasten the seatbelt, position his/ for persons with disabilities may Shen’s Corporation dba Prestige Automo-
her legs out forward, and adjust the seat to have on SUBARU advanced frontal bile
the rearmost position. Turn the ignition airbag system operation (U.S. only) 491, East Marine Drive, Route 1 Dededo,
switch to the “ON” position. If the OFF Changing or moving any parts of the front Guam
indicator remains illuminated while the ON seats, seatbelts, front bumper, front side 671-633-2698
indicator remains off, take the following frame, instrument panel, combination me-
actions. ter, steering wheel, steering column, tire, <Puerto Rico>
. Turn the ignition switch to the “LOCK” suspension or floor panel can affect the Trebol Motors
position. operation of the SUBARU advanced air- P.O. Box 11204, San Juan, Puerto Rico
. Ensure that there are no articles, bag system. If you have any questions, 00910
books, shoes, or other objects trapped you may contact the following SUBARU 787-793-2828
under the seat, at the rear of the seat, or distributors.
on the side of the seat. There are currently no SUBARU distribu-
. Next, turn the ignition switch to the <Continental U.S., Alaska and the District tors in any other U.S. territories. If you are
“ON” position and wait 6 seconds to allow of Columbia> in such an area, please contact the
the system to complete self-checking. Subaru of America, Inc. SUBARU distributor or dealer from which
Following the system check, both indica- Customer Dealer Services Department you bought your vehicle.
tors turn off for 2 seconds. Now, the ON P.O. Box 6000
indicator should illuminate while the OFF Cherry Hill, NJ 08034-6000
indicator remains off. 1-800-SUBARU3 (1-800-782-2783)
If the OFF indicator still remains illumi- <Hawaii>
nated while the ON indicator remains off, Servco Subaru Inc., dba Subaru Hawaii
ask the occupant to move to the rear seat 2850 Pukoloa Street, Suite 202, Honolulu,
and immediately contact your SUBARU HI 96819
dealer for an inspection.
808-839-2273
– CONTINUED –
1-56 Seat, seatbelt and SRS airbags
! Operation system is designed to determine the After deployment, the SRS airbag imme-
activation or deactivation condition of the diately starts to deflate so that the driver’s
front passenger’s SRS frontal airbag vision is not obstructed. The time required
depending on the total load on the front from detecting impact to the deflation of
passenger’s seat monitored by the front the SRS airbag after deployment is short-
passenger’s occupant detection system er than the blink of an eye.
weight sensor. For this reason, only the
driver’s SRS frontal airbag may deploy in When only the driver’s SRS frontal airbag
the event of a collision, but this does not deploys and both the driver’s and front
mean failure of the system. passenger’s SRS frontal airbags deploy,
the driver’s and front passenger’s seatbelt
If the front sub sensors located on both pretensioners operate at the same time.
sides of the radiator panel and the impact
sensors in the airbag control module Although it is highly unlikely that the SRS
detect a predetermined amount of force airbag would activate in a non-accident
during a frontal collision, the control situation, should it occur, the SRS airbag
module sends signals to the airbag will deflate quickly, not obscuring vision
module(s) (only driver’s module or both and will not interfere with the driver’s
driver’s and front passenger’s modules) ability to maintain control of the vehicle.
instructing the module(s) to inflate the When the SRS airbag deploys, a sudden,
SRS frontal airbag(s). The driver’s and fairly loud inflation noise will be heard and
front passenger’s SRS frontal airbags use some smoke will be released. These
dual stage inflators. The two inflators of occurrences are a normal result of the
each airbag are triggered either sequen- deployment. This smoke does not indicate
tially or simultaneously, depending on the a fire in the vehicle.
severity of impact, backward-forward ad-
justment of the driver’s seat position and CAUTION
fastening/unfastening of the seatbelt in the
1) Driver’s side Do not touch the SRS airbag system
case of the driver’s SRS frontal airbag and
2) Passenger’s side components around the steering
depending on the severity of impact and
The SRS airbag can function only when the total load on the seat in the case of the wheel and dashboard with bare
the ignition switch is in the “ON” position. front passenger’s SRS frontal airbag. hands right after deployment. Doing
The SUBARU advanced frontal airbag so can cause burns because the
Seat, seatbelt and SRS airbags 1-57
components can be very hot as a ! Examples of accidents in which the ! Examples of the types of accidents
result of deployment. driver’s/driver’s and front passen- in which it is possible that the
ger’s SRS frontal airbag(s) will most driver’s/driver’s and front passen-
The driver’s SRS frontal airbag and front likely deploy. ger’s SRS frontal airbag(s) will de-
passenger’s SRS frontal airbag are de- ploy.
signed to deploy in the event of an
accident involving a moderate to severe
frontal collision. It is basically not designed
to deploy in lesser frontal impacts be-
cause the necessary protection can be
achieved by the seatbelt alone. Also, they
are basically not designed to deploy in
side or rear impacts or in rollover acci-
dents because deployment of only the
driver’s SRS frontal airbag or both driver’s
and front passenger’s SRS frontal airbags
would not help the occupant in those
situations. The driver’s and front passen-
A head-on collision against a thick con-
ger’s SRS frontal airbags are designed to
crete wall at a vehicle speed of 12 to 19
function on a one-time-only basis.
mph (20 to 30 km/h) or higher activates
SRS airbag deployment depends on the only the driver’s SRS frontal airbag or both
level of force experienced in the passen- driver’s and front passenger’s SRS frontal
ger compartment during a collision. That airbags. The airbag(s) will also be acti-
level differs from one type of collision to vated when the vehicle is exposed to a
another, and it may have no bearing on frontal impact similar in fashion and
the visible damage done to the vehicle magnitude to the collision described
itself. above.
– CONTINUED –
1-58 Seat, seatbelt and SRS airbags
! Examples of the types of accidents in which deployment of the driver’s/driver’s 1) The vehicle strikes an object, such as a
telephone pole or sign pole.
and front passenger’s SRS frontal airbag(s) is unlikely to occur. 2) The vehicle slides under the load bed of
a truck.
3) The vehicle sustains an oblique offset
frontal impact.
4) The vehicle sustains an offset frontal
collision.
There are many types of collisions which
might not necessarily require deployment
of driver’s/driver’s and front passenger’s
SRS frontal airbag(s). In the event of
accidents like those illustrated, the dri-
ver’s/driver’s and front passenger’s SRS
frontal airbag(s) may not deploy depend-
ing on the level of accident forces in-
volved.
– CONTINUED –
1-60 Seat, seatbelt and SRS airbags
! Examples of the types of accidents to deploy if the vehicle is struck from the & SRS side airbag and SRS
in which the driver’s/driver’s and side or from behind, or if it rolls onto its curtain airbag
front passenger’s SRS frontal side or roof, or if it is involved in a low-
airbag(s) will basically not deploy. speed frontal collision. The SRS side airbag is stored in the door
side of each front seat seatback, which
bears an “SRS AIRBAG” label.
In a moderate to severe side impact
collision, the SRS side airbag on the
impacted side of the vehicle deploys
between the occupant and the door panel
and supplements the seatbelt by reducing
the impact to the occupant’s chest and
waist. The SRS side airbag operates only
for front seat occupants.
The SRS curtain airbag on each side of
the cabin is stored in the roof side
(between the front pillar and a point over
1) First impact the rear seat). An “SRS AIRBAG” mark is
2) Second impact located at the top of each center pillar.
In an accident where the vehicle is In a moderate to severe side impact
impacted more than once, the driver’s collision, the SRS curtain airbag on the
and/or front passenger’s SRS frontal impacted side of the vehicle deploys
airbag(s) will deploy only once on the first between the occupant and the side
impact. window and supplements the seatbelt by
reducing the impact on the occupant’s
Example: In the case of a double collision, head.
first with another vehicle, then against a In a rollover, SRS curtain airbags on both
concrete wall in immediate succession, sides of the vehicle deploy between the
once either or both of the driver’s and front occupant and the side window and sup-
passenger’s SRS frontal airbags is/are plement the seatbelt by reducing the
The driver’s and front passenger’s SRS activated on the first impact, it/they will not impact to the occupant’s head.
frontal airbags are designed basically not be activated on the second impact. The SRS curtain airbag does not operate
Seat, seatbelt and SRS airbags 1-61
– CONTINUED –
1-62 Seat, seatbelt and SRS airbags
right center pillars and rear wheel houses. pretensioners also operate at the same deployment.
Another impact sensor, which also senses time. After deployment, do not touch any
impact force, is located under the second- part of the SRS curtain airbag
row center seat. In addition, a rollover After deployment, the SRS side airbag
immediately starts to deflate. The time system (from the front pillar to the
sensor is located inside the airbag control part of the roof side over the rear
module. required from detection of an impact to
deflation of an SRS side airbag after seat). Doing so can cause burns
If one of the center pillar impact sensors deployment is shorter than the blink of because the components can be
and the impact sensor that is located an eye. very hot as a result of deployment.
under the second-row center seat to-
gether sense an impact force above a The SRS curtain airbag remains inflated The SRS side airbag and SRS curtain
predetermined level in a side collision, the for a while following deployment then airbag are designed to deploy in the event
control module causes both the SRS side slowly deflates. of an accident involving a moderate to
airbag and curtain airbag on the impacted The SRS side airbag and SRS curtain severe side impact collision. Also, in the
side to inflate regardless of whether the airbag deploy even when no one occupies case of a rollover, the SRS curtain airbag
rear wheel house impact sensor on the the seat on the side on which an impact is deploys. They are basically not designed
same side senses an impact. At this time, applied. to deploy in a lesser side impact. Also,
the driver’s and front passenger’s seatbelt they are basically not designed to deploy
pretensioners also operate at the same When the SRS side airbag and SRS in frontal or rear impacts because SRS
time. curtain airbag deploy, a sudden, fairly loud side airbag and SRS curtain airbag
inflation noise will be heard and some deployment would not help the occupant
If one of the rear wheel house impact smoke will be released. These occur- in those situations.
sensors and the impact sensor that is rences are a normal result of the deploy-
located under the second-row center seat ment. This smoke does not indicate a fire Each SRS side airbag and SRS curtain
together sense an impact force above a in the vehicle. airbag are designed to function on a one-
predetermined level in a side collision, the time-only basis.
control module causes only the SRS CAUTION SRS side airbag and SRS curtain airbag
curtain airbag on the impacted side to deployment depend on the level of force
inflate. Do not touch the SRS side airbag
experienced in the passenger compart-
system components around the
If the rollover sensor detects rollover of the ment during a side impact collision. That
front seat seatback with bare hands
vehicle, the control module inflates the level differs from one type of collision to
right after deployment. Doing so can
SRS curtain airbags. At this time, the another, and it may have no bearing on
cause burns because the compo-
driver’s and front passenger’s seatbelt the visible damage done to the vehicle
nents can be very hot as a result of
Seat, seatbelt and SRS airbags 1-65
itself. Also, the SRS curtain airbag de- ! Example of the type of accident in
ploys depending on the vehicle’s position which the SRS side airbag will most
and inclination at the time of the rollover. likely deploy.
– CONTINUED –
1-66 Seat, seatbelt and SRS airbags
! Examples of the types of accidents in which the SRS curtain airbag will most 1) A severe side impact near the front seat
or the rear seat activates the SRS curtain
likely deploy. airbag.
2) The vehicle rolls onto its side or the roof.
3) If the angle of vehicle tip-up is marginal
or if the skidding vehicle’s tires hit a
curbstone laterally.
Seat, seatbelt and SRS airbags 1-67
! Examples of the types of accidents in which it is possible that the SRS side 1) Hitting a curb, edge of pavement or hard
surface
airbag and the SRS curtain airbag will deploy. 2) Falling into or jumping over a deep hole
3) Landing hard or vehicle falling
It is possible that the SRS side and curtain
airbags will deploy if a serious impact
occurs to the underside of your vehicle.
Some examples are shown in the illustra-
tion.
– CONTINUED –
1-68 Seat, seatbelt and SRS airbags
! Examples of the types of accidents in which the SRS side airbag is unlikely to 1) The vehicle is involved in an oblique
side-on impact.
deploy. 2) The vehicle is involved in a side-on
impact in an area outside the vicinity of
the passenger compartment.
3) The vehicle strikes a telephone pole or
similar object.
4) The vehicle is involved in a side-on
impact from a motorcycle.
5) The vehicle rolls onto its side or the roof.
There are many types of collisions which
might not necessarily require SRS side
airbag deployment. In the event of acci-
dents like those illustrated, the SRS side
airbag may not deploy depending on the
level of accident forces involved.
Seat, seatbelt and SRS airbags 1-69
! Examples of the types of accidents in which the SRS curtain airbag is unlikely 1) The vehicle is involved in an oblique
side-on impact.
to deploy. 2) The vehicle is involved in a side-on
impact in an area outside the vicinity of
the passenger compartment.
3) The vehicle is involved in a side-on
impact from a motorcycle.
There are many types of collisions which
might not necessarily require SRS curtain
airbag deployment. In the event of acci-
dents like those illustrated, the SRS
curtain airbag may not deploy depending
on the level of accident forces involved.
– CONTINUED –
1-70 Seat, seatbelt and SRS airbags
! Examples of the types of accidents 2) The vehicle is struck from behind. and SRS curtain airbag are activated on
in which the SRS side airbag and The SRS side airbag and SRS curtain the first impact, they will not be activated
SRS curtain airbag will basically not airbag are basically not designed to on the second.
deploy. deploy if the vehicle is involved in a frontal ! Example of the type of accident in
collision or is struck from behind. Exam- which the SRS curtain airbag will
ples of such accidents are illustrated. basically not deploy.
1) First impact
2) Second impact The SRS curtain airbags are not basically
A) SRS curtain airbag designed to deploy if the vehicle pitches
B) SRS side airbag end over end.
In an accident where the vehicle is struck
from the side more than once, the SRS
side airbag and SRS curtain airbag deploy
only once on the first impact.
Example: In the case of a double side
impact collision, first with one vehicle and
1) The vehicle is involved in frontal collision immediately followed by another from the
with another vehicle (moving or station- same direction, once the SRS side airbag
ary).
Seat, seatbelt and SRS airbags 1-71
& SRS airbag system monitors ger’s side) and OFF indicator
. Side airbag sensor (center pillar right- . All related wiring
hand side)
. Side airbag sensor (center pillar left- WARNING
hand side)
If the warning light exhibits any of
. Side airbag module (driver’s side) the following conditions, there may
. Side airbag module (front passenger’s be a malfunction in the seatbelt
side) pretensioners and/or SRS airbag
. Curtain airbag sensor (rear wheel system. Immediately take your vehi-
house right-hand side) cle to your nearest SUBARU dealer
. Curtain airbag sensor (rear wheel to have the system checked. Unless
house left-hand side) checked and properly repaired, the
. Curtain airbag module (right-hand side) seatbelt pretensioners and/or SRS
. Curtain airbag module (left-hand side) airbags will operate improperly (e.g.
A diagnostic system continually monitors SRS airbags may inflate in a very
the readiness of the SRS airbag system . Satellite safing sensor (under the sec-
minor collision or not inflate in a
(including front seatbelt pretensioners) ond-row center seat)
severe collision), which may in-
while the vehicle is being driven. The . Seatbelt pretensioner (driver’s side) crease the risk of injury.
SRS airbag system warning light “AIR- . Seatbelt pretensioner (front passen-
BAG” will show normal system operation . Flashing or flickering of the warn-
ger’s side)
by lighting for approximately 6 seconds ing light
. Seatbelt buckle switch (driver’s side)
when the ignition switch is turned to the . No illumination of the warning
. Seatbelt buckle switch (front passen-
“ON” position. light when the ignition switch is
ger’s side)
first turned to the “ON” position
The following components are monitored . Driver’s seat position sensor
by the indicator. . Continuous illumination of the
. Front passenger’s seatbelt tension
warning light
. Front sub sensor (right-hand side) sensor
. Front sub sensor (left-hand side) . Front passenger’s occupant detection . Illumination of the warning light
system weight sensor while driving
. Airbag control module (including im-
pact and rollover sensors) . Front passenger’s occupant detection
. Frontal airbag module (driver’s side) control module
. Frontal airbag module (front passen- . Front passenger’s frontal airbag ON
– CONTINUED –
1-72 Seat, seatbelt and SRS airbags
& SRS airbag system servicing . Under the center console the driver’s SRS frontal airbag or both
. Inside each front fender driver’s and front passenger’s SRS
WARNING frontal airbags did not deploy.
. Steering wheel and column and . The pad of the steering wheel, the
. When discarding an airbag mod- nearby areas cover over the front passenger’s SRS
ule or scrapping the entire vehi- . Top of the dashboard on front frontal airbag, or either roof side (from
cle damaged by a collision, con- passenger’s side and nearby the front pillar to a point over the rear
sult your SUBARU dealer. areas seat) is scratched, cracked, or other-
. The SRS airbag has no user- . Each front seat and nearby area wise damaged.
serviceable parts. Do not use . Center pillar, rear wheel house or
. Inside each center pillar
electrical test equipment on any rear floor pan, or an area near these
. In each roof side (from the front parts, was involved in an accident in
circuit related to the SRS airbag
pillar to a point over the rear seat) which the SRS side airbag and SRS
system. For required servicing of
the SRS airbag, consult your . Between the rear seat cushion curtain airbag did not deploy.
nearest SUBARU dealer. Tamper- and rear wheel house on each . The fabric or leather of either front
ing with or disconnecting the side seatback is cut, frayed, or otherwise
system’s wiring could result in . Under the second-row center damaged.
accidental inflation of the SRS seat . The rear part of the vehicle was
airbag or could make the system involved in an accident in which no
inoperative, which may result in In the event that the SRS airbag is SRS airbag was deployed.
serious injury. deployed, replacement of the system
should be performed only by an author- & Precautions against vehicle
ized SUBARU dealer. When the compo- modification
CAUTION nents of the SRS airbag system are
replaced, use only genuine SUBARU WARNING
If you need service or repair in areas parts.
indicated in the following list, have
To avoid accidental activation of the
the work performed by an author- NOTE system or rendering the system
ized SUBARU dealer. The SRS air- In the following cases, contact your inoperative, which may result in
bag control module, impact sensors SUBARU dealer as soon as possible. serious injury, no modifications
and airbag modules are stored in . The front part of the vehicle was should be made to any components
these areas. involved in an accident in which only or wiring of the SRS airbag system.
Seat, seatbelt and SRS airbags 1-73
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
Keys and doors
Keys box locked when you leave your vehicle & Key number plate
and valet key at a parking facility.
CAUTION
Do not attach a large key holder or
key case to either key. If it bangs
against your knees while you are
driving, it could turn the ignition
switch from the “ON” position to the
“Acc” or “LOCK” position, thereby
stopping the engine.
Immobilizer stantly, the immobilizer system does not windows and lock the doors and rear
impede normal starting of the engine. gate.
If the engine does not start, pull out the . Do not leave spare keys or any
CAUTION key once before trying again. Refer to record of your key number in the
“Ignition switch” F3-3. vehicle.
FCC WARNING
This device complies with Part 15 of
Changes or modifications not ex-
the FCC Rules and RSS-Gen of IC & Security ID plate
pressly approved by the party re-
sponsible for compliance could void Rules. Operation is subject to the
the user’s authority to operate the following two conditions: (1) this de-
equipment. vice may not cause harmful interfer-
ence, and (2) this device must accept
The immobilizer system is designed to any interference received, including
prevent an unauthorized person from interference that may cause undesired
starting the engine. Only keys registered operation.
with your vehicle’s immobilizer system can
be used to operate your vehicle. Even if
CAUTION
an unregistered key fits into the ignition . Do not place the key under direct
switch and can be turned to the “START” sunlight or anywhere it may
position, the engine will automatically stop become hot.
after several seconds. 1) Key number plate
. Do not get the key wet. If the key
Each immobilizer key contains a trans- gets wet, wipe it dry with a cloth 2) Security ID plate
ponder in which the key’s ID code is immediately. The security ID is stamped on the security
stored. When a key is inserted into the ID plate attached to the key set. Write
ignition switch and turned to the “ON” down the security ID and keep it in
position, the transponder transmits the NOTE
another safe place, not in the vehicle.
key’s ID code to the immobilizer system’s To protect your vehicle from theft, This number is needed to make a replace-
receiver. If the transmitted ID code please pay close attention to the fol- ment key if you lose your key or lock it
matches the ID code registered in the lowing security precautions. inside the vehicle.
immobilizer system, the system allows the . Never leave your vehicle unattended This number is also needed for replace-
engine to be started. Since the ID code is with its keys inside. ment or repair of the engine control unit,
transmitted and acted upon almost in- . Before leaving your vehicle, close all
– CONTINUED –
2-4 Keys and doors
integrated unit, and combination meter. NOTE option can register up to three keys for
Even if the security indicator light use with one vehicle.
& Security indicator light flashes irregularly or its fuse blows
(the light does not flash if its fuse is
blown), the immobilizer system will
function normally.
It also helps prevent passengers ging. The following interior lights are
from falling out if a door is acciden- affected by this function.
tally opened, and intruders from
unexpectedly opening doors and Item Switch Automatically turning
position off
entering your vehicle.
Map lights OFF Approximately 30
seconds later
door locking switches. tional setting can be changed by a Remote keyless entry system
SUBARU dealer. Contact a SUBARU
& Key lock-in prevention func- dealer for details.
tion CAUTION
NOTE
This function prevents the doors from When leaving the vehicle, make sure . Do not expose the remote trans-
being locked with the key still in the you are holding the key before locking mitter to severe shocks, such as
ignition switch. the doors. those experienced as a result of
! Behavior with key lock-in preven- dropping or throwing.
tion function operational . Do not take the remote transmit-
. With either the driver’s or front passen- ter apart except when replacing
ger’s door open, the doors automatically the battery.
remain unlocked even if the “ ” side of the . Do not get the remote transmitter
door locking switch is pushed. wet. If it gets wet, wipe it dry with
. It is possible to lock the all doors and a cloth immediately.
the rear gate by holding the “ ” side of the . When you carry the remote trans-
door locking switch pushed for 3 seconds mitter on an airplane, do not
with the driver’s door open and then press the button of the remote
closing the driver’s door. transmitter while in the airplane.
! Behavior with key lock-in preven- When any button of the remote
tion function non-operational transmitter is pressed, radio
waves are sent and may affect
. If the lock lever is turned to the rear the operation of the airplane.
(“LOCK”) position with the driver’s door When you carry the remote trans-
open and the driver’s door is then closed mitter in a bag on an airplane,
with the lock lever in that position, the take measures to prevent the
driver’s door is locked. buttons of the remote transmitter
. If the spare key is used to lock the from being pressed.
driver’s door from the outside of the
vehicle, the door is locked. This device complies with Part 15 of
the FCC Rules and with RSS-210 of
This function’s operational/non-opera-
Industry Canada. Operation is subject
Keys and doors 2-9
to the following two conditions: (1) This equipment emitting strong radio waves & Locking the doors
device may not cause harmful inter- such as a power plant, broadcast station,
ference, and (2) this device must TV tower, or remote controller of home
accept any interference received, in- electronic appliances.
cluding interference that may cause
undesired operation. NOTE
Changes or modifications not ex- The remote keyless entry system does
pressly approved by the party respon- not operate when the ignition key is
sible for compliance could void the inserted in the ignition switch or when
user’s authority to operate the equip- any of the doors or the rear gate is not
ment. fully closed.
The transmitter for the remote keyless
entry system is located inside the key
head.
Press the “ ” button to lock all doors and
The remote keyless entry system has the rear gate. An electronic chirp will sound
following functions. once and the turn signal lights will flash
. Locking and unlocking the doors and once.
rear gate without a key If any of the doors or the rear gate is not
. Unlocking the rear gate without key fully closed, an electronic chirp will sound
. Sounding a panic alarm five times and the turn signal lights will
. Arming and disarming the alarm sys- flash five times to alert you that any of the
tem. For detailed information, refer to doors or the rear gate is not properly
“Alarm system” F2-16. closed. When you close the door, it will
: Rear gate unlock button automatically lock and then an electronic
The operable distance of the remote : Unlock/disarm button
chirp will sound once and the turn signal
keyless entry system is approximately 30 : Lock/arm button
lights will flash once.
A: Panic button
feet (10 meters). However, this distance
will vary depending on environmental
conditions.
The system’s operable distance will be
shorter in areas near a facility or electronic
– CONTINUED –
2-10 Keys and doors
& Unlocking the doors & Unlocking the rear gate positions:
Map light: OFF position
Dome light: DOOR position
Cargo area light: DOOR position
A SUBARU dealer can change the illumi-
nation period setting of the interior lights in
accordance with your preference. Contact
the nearest SUBARU dealer for details.
& Sounding a panic alarm signal. You can also use the same steps swallow them.
to restore the function. . There is a danger of explosion if
1. Sit in the driver’s seat and shut all an incorrect replacement battery
doors and the rear gate. is used. Replace only with the
2. Hold down the UNLOCK side of the same or equivalent type of bat-
power door locking switch. tery.
3. While holding down the “UNLOCK” . Batteries should not be exposed
side of the power door locking switch, pull to excessive heat such as sun-
the key out and re-insert it into the ignition shine, fire or the like.
switch at least 6 times within 10 seconds
after Step 2. When the transmitter battery begins to get
4. Open and close the driver’s door once weak, transmitter range will begin to
within 10 seconds after step 3. decrease. Replace the battery as soon
5. The turn signal lights flash 3 times to as possible.
To activate the alarm, press the “PANIC” indicate completion of the setting.
button once. To replace the battery:
The horn will sound and the turn signal You may have the above settings done by
lights will flash. your SUBARU dealer.
To deactivate the panic alarm, press any & Replacing the battery
button on the remote transmitter. Unless a
button on the remote transmitter is CAUTION
pressed, the alarm will be deactivated
after approximately 30 seconds. . Do not let dust, oil or water get on
or in the transmitter when repla-
& Selecting audible signal op- cing the battery.
eration . Be careful not to damage the
Using an electronic chirp, the system will printed circuit board in the trans-
give you an audible signal when the doors mitter when replacing the battery.
lock and unlock. If desired, you may turn . Be careful not to allow children to 1. Remove the screw on the key head.
the audible signal off. touch the battery and any re-
Do the following to deactivate the audible moved parts; children could
– CONTINUED –
2-12 Keys and doors
form the whole procedure again begin- ter code. For example, push the locking
ning with part 1. switch eight times if the leftmost digit of
the code is 8.
4. Open and close the door once within
15 seconds. NOTE
NOTE . The electronic tone will stop sound-
ing when you start entering the num-
. When part 4 of the procedure is
ber.
completed, an electronic tone will
. If you do not start entering the
sound for 30 seconds.
number using the lock knob before
. If you do not perform the operations
the electronic tone stops sounding, an
in part 4 within 15 seconds, an error
error will occur. In this event, perform
will occur and the electronic tone will
the registration steps again beginning
not sound. In this event, perform the
with part 3 of the procedure. 6. When you have finished entering the
registration steps again beginning with
. If the interval between one push of number, push the “ ” side of the locking
part 3 of the procedure.
the knob and the next exceeds 5 switch within 5 seconds.
seconds, an error will occur. In this
event, perform the procedure again NOTE
beginning with part 4. If an error occurs . An electronic tone will sound.
six times, perform the procedure again . If you push the “ ” side of the
starting with part 3. locking switch when more than 5
seconds have passed, an error will
occur. In this event, perform the proce-
dure again beginning with part 4. If an
error occurs six times, perform the
procedure again starting with part 3.
7. Perform parts 5 and 6 of the procedure
for each of the remaining digits of the
5. Before the electronic tone stops transmitter code beginning with the sec-
sounding, push the “ ” side of the power ond digit (counting from the left) and
door locking switch the same number of finishing with the eighth digit.
times as the leftmost digit of the transmit-
Keys and doors 2-15
NOTE NOTE you have only one current transmitter,
. When you finish entering the eighth If the code entered the second time is program it four times. If you have two
digit, an electronic tone will sound for not identical to the code entered the current transmitters, program each one
30 seconds. first time, an error will occur. In this twice. If you have three current transmit-
. If the interval between one push of event, perform the procedure again ters, program two of them once and the
the switch and the next exceeds 5 beginning with part 5. If an error occurs third one twice. This process will leave
seconds, an error will occur. In this five times, perform the procedure again only current transmitter codes in the
event, perform the procedure again starting with part 3. system’s memory.
beginning with part 4. If an error occurs
six times, perform the procedure again
10. If you wish to program another trans- NOTE
mitter code into the system (up to four Make sure no one else is operating
starting with part 3.
transmitter codes can be programmed into their keyless entry system within range
8. Before the electronic tone stops the system), perform the procedure begin- of your vehicle when programming
sounding, use the power door locking ning with part 4. When you have finished transmitters. If someone else were to
switch to reenter the transmitter code programming all of the necessary trans- operate their remote transmitter while
beginning with the leftmost digit. mitter codes into the system, remove the you are programming your transmit-
key from the ignition switch. ters, it is possible that their transmitter
NOTE 11. Test every registered transmitter to code will be programmed into your
If you do not start entering the number confirm correct operation. system, allowing them unauthorized
using the lock knob before the electro- access to your vehicle.
nic tone stops sounding, an error will ! Deleting old transmitter codes
occur. In this event, perform the proce-
The control unit of the remote keyless
dure again beginning with part 3.
entry system has four memory locations to
9. When you have finished entering the store transmitter codes, giving it the ability
code a second time, an electronic tone will to operate with up to four transmitters.
sound for 1 second and automatic door When you lose a transmitter, the lost
locking and unlocking operation will take transmitter’s code remains in the memory.
place once to indicate completion of For security reasons, lost transmitter
registration, provided the code entered codes should be deleted from the mem-
the second time is identical to that entered ory.
the first time. To delete old transmitter codes, program
four transmitter codes into the system. If
2-16 Keys and doors
& If you have accidentally trig- once and the indicator lights will start
gered the alarm system flashing rapidly. After rapid flashing for 30
seconds (standby time), the indicator
! To stop the alarm lights will then flash slowly (twice approxi-
Do any of the following operations. mately every 2 seconds), indicating that
. Press any button on the remote trans- the system has been armed for surveil-
mitter. lance.
. Turn the ignition switch to the “ON” If any of the doors or the rear gate is not
position. fully closed, an electronic chirp sounds
five times, the turn signal lights flash five
& Arming the system times to alert you that the doors or the rear
gate are not properly closed. When you
! To arm the system using remote close the door, the system will automati-
transmitter : Press to Arm the system.
: Press to Disarm the system. cally arm and doors will automatically lock.
1. Close all windows and the moonroof. ! To arm the system using power
2. Remove the key from the ignition door locking switches
switch.
1. Close all windows.
3. Open the doors and get out of the
vehicle. 2. Remove the key from the ignition
switch.
4. Make sure that the engine hood is
locked. 3. Open the doors and get out of the
vehicle.
5. Close all doors and the rear gate.
4. Make sure that the engine hood is
locked.
5. Close the doors and the rear gate but
leave only the driver’s door or the front
passenger’s door open.
6. Briefly press the “ ” button (for less
than 2 seconds). All doors and the rear
gate will lock, an electronic chirp will
sound once, the turn signal lights will flash
– CONTINUED –
2-18 Keys and doors
– CONTINUED –
2-20 Keys and doors
& Tripped sensor identification & Shock sensors (dealer op- Example:
The security indicator light flashes when tion) – Vibration from construction site
the alarm system has been triggered. The shock sensors trigger the alarm – Vibration in multistory car park
Also, the number of flashes indicates the system when they sense impacts applied – Vibration from trains
location of unauthorized intrusion or the to the vehicle and when any of their . You can have the sensitivity of the
severity of impact on the vehicle. electric wires is cut. The alarm system shock sensors adjusted to your pre-
causes the horn to sound and the turn ference by your SUBARU dealer.
When the ignition switch is turned to the
signal lights to flash for a short time when
“ON” position, the indicator light will
the sensed impact is weak, but it warns of
illuminate for 1 second and then flash as
a strong impact or multiple impacts by
follows.
sounding the horn and flashing the turn
. When a door or rear gate was opened: signal lights, both lasting approximately 30
5 times seconds.
. When the ignition switch was turned to If you desire, your SUBARU dealer can
the “ON” position by using a key not connect them and set them for activation
registered with your immobilizer system: 3 or deactivation.
times
. When a strong impact or multiple NOTE
impacts were sensed: twice (only vehicles . The shock sensors are not always
with shock sensors (dealer option)) able to sense impacts caused by break-
. When a light impact was sensed: once ing in, and cannot sense an impact that
(only vehicles with shock sensors (dealer does not cause vibration (such as
option)) breaking the glass using a rescue
hammer).
NOTE . The shock sensors may sense vi-
Any of the above indicator light flash- bration like those shown in the follow-
ing patterns will recur each time the ing list and trigger the alarm system.
ignition switch is turned to the “ON” Select the settings of the alarm system
position. Rearming the alarm system and shock sensors appropriately de-
cancels the flashing pattern of the pending on where you usually park
security indicator light. your vehicle.
Keys and doors 2-21
To close:
1) Open Pull the switch up lightly and hold it. The
2) Automatically open window will close as long as the switch is
held.
To open:
To close:
Push the switch down lightly and hold it. ! Operating the passengers’ windows
Pull the switch up and hold it until the
The window will open as long as the
window reaches the desired position.
switch is held.
This switch also has a one-touch auto
down feature that allows the window to be
opened fully without holding the switch.
Push the switch down until it clicks and
release it, and the window will fully open.
To stop the window halfway, pull the
switch up lightly.
Keys and doors 2-23
– CONTINUED –
2-26 Keys and doors
CAUTION
Never attempt to test this function
using fingers, hands or other parts
of your body.
NOTE
For the sake of safety, it is recom-
mended that you avoid driving with the
moonroof fully opened.
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
Instruments and controls
Light control switch ........................................... 3-26 Rear window wiper and washer switch ............... 3-34
Headlights.......................................................... 3-26 Windshield wiper deicer.................................... 3-35
High/low beam change (dimmer)......................... 3-27 Rear window defogger button .......................... 3-36
Headlight flasher ................................................ 3-27 Mirrors ................................................................ 3-37
Daytime running light system ............................. 3-27 Type A inside mirror (if equipped) ...................... 3-37
Turn signal lever ................................................ 3-28 Type B inside mirror (if equipped) ...................... 3-37
Illumination brightness control ......................... 3-28 Type C inside mirror (if equipped) ...................... 3-40
Headlight beam leveler (if equipped) ................ 3-29 Outside mirrors ................................................. 3-41
Parking light switch ........................................... 3-31 Tilt steering wheel ............................................. 3-43
Front fog light switch......................................... 3-31 Horn .................................................................... 3-43
Wiper and washer .............................................. 3-32
Windshield wiper and washer switches ............... 3-33
Instruments and controls 3-3
Ignition switch tion to the “Acc” or “LOCK” posi- . If the ignition switch will not move
tion, thereby stopping the engine. from the “LOCK” position to the “Acc”
Also, if the key is attached to a position, turn the steering wheel
WARNING keyholder or to a large bunch of slightly to the left and right as you turn
other keys, centrifugal force may act the ignition switch.
. Never turn the ignition switch to on it as the vehicle moves, resulting
“LOCK” while the vehicle is in unwanted turning of the ignition & LOCK
being driven or towed because switch.
that will lock the steering wheel, The key can only be inserted or removed
preventing steering control. And in this position. The ignition switch will lock
The ignition switch has four positions:
when the engine is turned off, it the steering wheel when you remove the
LOCK, Acc, ON and START.
takes a much greater effort than key.
usual to steer. If turning the key is difficult, turn the
. Before leaving the vehicle, al- steering wheel slightly to the right and left
ways remove the key from the as you turn the key.
ignition switch for safety and
never allow an unattended child
to remain in the vehicle. Failure
to follow this procedure could
result in injury to a child or
others. Children could operate
the power windows, the moon-
roof or other controls or even
make the vehicle move.
NOTE
CAUTION . Keep the ignition switch in the
“LOCK” position when the engine is
Do not attach a large key holder or not running. The key can be turned from “Acc” to
key case to either key. If it banged . Using electrical accessories for a “LOCK” only when the select lever is in the
against your knees or hands while long time with the ignition switch in the “P” position.
you were driving, it could turn the “ON” or “Acc” position can cause the
ignition switch from the “ON” posi- battery to go dead.
– CONTINUED –
3-4 Instruments and controls
Hazard warning flasher Meters and gauges ignition switch to start the engine. This
is not a malfunction.
meter needles and gauges when the combination meter when the ignition & Speedometer
ignition switch is turned to the “ON” switch is turned to the “ON” position. To The speedometer shows the vehicle
position. To change the current setting, change the current setting, press the trip speed.
press the trip knob for at least 2 seconds. knob for at least 2 seconds.
: Activated : Activated & Odometer
: Deactivated : Deactivated
With the function deactivated, the combi- Briefly press the knob to return to the A trip
nation meter illuminates as follows. meter indication.
1. Warning lights, indicator lights, meter If you turn the ignition switch to the
rims, meter needles, odometer, trip meter, “LOCK” position, turn the ignition switch
and gauge back lights illuminate. to the “ON” position, or open and close the
2. Meter and gauge dials illuminate. driver’s door during the setting procedure,
3. Regular illumination (for driving) be- the new setting will be canceled.
gins. Also, if you do not press the trip knob for a
period of 10 seconds, the new setting will
be canceled.
NOTE This meter displays the odometer when
. It is not possible to cancel sequen- the ignition switch is in the “LOCK”, “Acc”
tial illumination of the combination or “ON” position.
meter while sequential illumination is The odometer shows the total distance
actually taking place. Cancel sequen- that the vehicle has been driven.
tial illumination when regular illumina-
tion (for driving) has begun. If you press the trip knob when the ignition
. When you open the driver’s door switch is in the “LOCK” or “Acc” position,
with the ignition switch in the “LOCK” the odometer/trip meter will light up. If you
position, the meters’ needles and rims do not press the trip knob within 10
are lit. The illumination stops working seconds of illumination of the odometer/
Briefly press the trip knob again. You can trip meter, the odometer/trip meter will turn
when you shut the driver’s door or
now establish the activated/deactivated off.
automatically after 30 seconds.
setting for sequential illumination of the
Instruments and controls 3-7
pointer of the tachometer in the red level movement in the tank. ! Low fuel warning light
zone. This may cause severe da- If you press the trip knob while the ignition
mage to the engine. switch is in the “LOCK” or “Acc” position,
the fuel gauge will light up and indicate the CAUTION
amount of fuel remaining in the tank.
NOTE Promptly put fuel in the tank when-
To protect the engine while the select NOTE ever the low fuel warning light
lever is in the “P” or “N” position, the illuminates. Engine misfires as a
engine is controlled so that the engine result of an empty tank could cause
speed may not become too high even if damage to the engine.
the accelerator pedal is depressed
hard. The low fuel warning light illuminates
when the tank is nearly empty (approxi-
& Fuel gauge mately 2.6 US gal [10 liters, 2.2 Imp gal]).
It only operates when the ignition switch is
in the “ON” position. When this light
illuminates, fill the fuel tank immediately.
NOTE
This light does not turn off unless the
tank is replenished up to an internal
You will see the “ ” sign in the fuel fuel quantity of approximately 4.0 US
gauge meter. gal (15 liters, 3.3 Imp gal).
This indicates that the fuel filler door
(lid) is located on the right side of the
vehicle.
– CONTINUED –
3-10 Instruments and controls
The warning light(s) for unfastened . Do not install any accessory such as a & SRS airbag system
seatbelt(s) will alternate between table or TV onto the seatback. warning light
steady illumination and flashing at . Do not store a heavy load in the
15-second intervals. The chime will seatback pocket. When the ignition switch is turned to the
not sound. “ON” position, the SRS airbag system
. Do not allow the rear seat occupant to
– At speeds higher than approxi- warning light will illuminate for approxi-
place his/her hands or legs on the front
mately 9 mph (15 km/h) mately 6 seconds and turn off. This shows
passenger’s seatback, or allow him/her to
The warning light(s) for unfastened the SRS frontal airbag and SRS side
pull the seatback.
seatbelt(s) will alternate between airbag and SRS curtain airbag and seat-
flashing and steady illumination at If the seatbelt warning device for the front belt pretensioners are in normal operation.
15-second intervals and the chime passenger’s seat does not function cor-
will sound while the warning light(s) rectly (e.g., it is activated even when the WARNING
is/are flashing. front passenger’s seat is empty or it is
If the warning light exhibits any of
. It is possible to cancel the warning deactivated even when the front passen-
the following conditions, there may
operation that follows the 6-second ger has not fastened his/her seatbelt),
be a malfunction in the seatbelt
warning after turning ON the ignition take the following actions.
pretensioners and/or SRS airbag
switch. When the ignition switch is . Ensure that no article is placed on the system. Immediately take your vehi-
turned ON next time, however, the seat other than a child restraint system cle to your nearest SUBARU dealer
complete sequence of the warning and its child occupant. to have the system checked. Unless
operation resumes. For further details . Ensure that there is no article left in the checked and properly repaired, the
about canceling the warning operation, seatback pocket. seatbelt pretensioners and/or SRS
please contact your SUBARU dealer. airbags will operate improperly (e.g.
If still the seatbelt warning device for front
If there is no passenger on the front SRS airbags may inflate in a very
passenger’s seat does not function cor-
passenger’s seat, the seatbelt warning minor collision or not inflate in a
rectly after taking relevant corrective ac-
device for the front passenger’s seat will severe collision), which may in-
tions described above, immediately con-
be deactivated. The front passenger’s crease the risk of injury.
tact your SUBARU dealer for an inspec-
occupant detection system monitors . Flashing or flickering of the warn-
tion.
whether or not there is a passenger on ing light
the front passenger’s seat. Observe the
following precautions. Failure to do so . No illumination of the warning
may prevent the device from functioning light when the ignition switch is
correctly or cause the device to fail. first turned to the “ON” position
– CONTINUED –
3-12 Instruments and controls
. Continuous illumination of the When the ignition switch is turned to the & CHECK ENGINE warn-
warning light “ON” position, both the ON and OFF ing light/Malfunction in-
. Illumination of the warning light indicators illuminate for 6 seconds during dicator lamp
while driving which time the system is checked. Follow-
ing the system check, both indicators turn CAUTION
off for 2 seconds. After that, one of the
indicators illuminates depending on the If the CHECK ENGINE light illumi-
& Front passenger’s frontal status of the front passenger’s SRS frontal nates while you are driving, have
airbag ON and OFF indica- airbag determined by the SUBARU ad- your vehicle checked/repaired by
tors vanced frontal airbag system monitoring. your SUBARU dealer as soon as
If the front passenger’s SRS frontal airbag possible. Continued vehicle opera-
is activated, the passenger’s frontal airbag tion without having the emission
ON indicator will illuminate while the OFF control system checked and re-
indicator will remain off. paired as necessary could cause
If the front passenger’s SRS frontal airbag serious damage, which may not be
is deactivated, the passenger’s frontal covered by your vehicle’s warranty.
airbag ON indicator will remain off while
the OFF indicator will illuminate. If this light illuminates steadily or blinks
If both the ON and OFF indicators remain while the engine is running, it may indicate
illuminated or off simultaneously, the that there is a problem or potential
system is malfunctioning. Contact your problem somewhere in the emission con-
SUBARU dealer immediately for an in- trol system.
spection. ! If the light illuminates steadily
: Front passenger’s frontal airbag ON
indicator If the light illuminates steadily while driving
: Front passenger’s frontal airbag OFF or does not turn off after the engine starts,
indicator an emission control system malfunction
The front passenger’s frontal airbag ON has been detected.
and OFF indicators show you the status of You should have your vehicle checked by
the front passenger’s SRS frontal airbag. an authorized SUBARU dealer immedi-
The indicators are located in the center ately.
portion of the dashboard.
Instruments and controls 3-13
NOTE The CHECK ENGINE warning light may is not working properly.
This light also illuminates when the fuel stop blinking and illuminate steadily after If the light illuminates while driving or does
filler cap is not tightened until it clicks. several driving trips. You should have your not turn off after the engine starts, stop the
vehicle checked by an authorized engine at the first safe opportunity and
If you have recently refueled your vehicle,
SUBARU dealer immediately. check the engine oil level. If the oil level is
the cause of the CHECK ENGINE warning
light/malfunction indicator lamp illuminat- low, add oil immediately. If the engine oil is
ing could be a loose or missing fuel filler
& Charge warning light at the proper level but the light remains
cap. Remove the cap and retighten it until If this light illuminates when the engine is illuminated, contact your nearest
it clicks. Make sure nothing is interfering running, it may indicate that the charging SUBARU dealer immediately.
with the sealing of the cap. Tightening the system is not working properly.
cap will not make the CHECK ENGINE & AT OIL TEMP warning
warning light turn off immediately. It may If the light illuminates while driving or does light
take several driving trips. If the light does not turn off after the engine starts, stop the
engine at the first safe opportunity and The AT oil temperature warning light “AT
not turn off, take your vehicle to your OIL TEMP” illuminates when the ignition
authorized SUBARU dealer immediately. check the alternator belt. If the belt is
loose, broken or if the belt is in good switch is turned to the “ON” position and
! If the light is blinking condition but the light remains illuminated, turns off after approximately 2 seconds.
If the light is blinking while driving, an contact your nearest SUBARU dealer If this light illuminates when the engine is
engine misfire condition has been de- immediately. running, it may indicate that the automatic
tected which may damage the emission transmission fluid temperature is too hot.
control system. & Oil pressure warning If the light illuminates while driving, im-
To prevent serious damage to the emis- light mediately stop the vehicle in a safe place
sion control system, you should do the and let the engine idle until the warning
following. CAUTION light turns off.
. Reduce vehicle speed. ! Automatic transmission control
Do not operate the engine with the
. Avoid hard acceleration. oil pressure warning light illumi- system warning
. Avoid steep uphill grades. nated. This may cause serious en- If the light flashes after the engine starts, it
. Reduce the amount of cargo, if possi- gine damage. may indicate that the automatic transmis-
ble. sion control system is not working prop-
. Stop towing a trailer as soon as If this light illuminates when the engine is erly. Contact your nearest SUBARU deal-
possible. running, it may indicate that the engine oil er for service immediately.
pressure is low and the lubricating system
– CONTINUED –
3-14 Instruments and controls
& Rear differential oil . The rear differential oil will deterio- more of your tires is significantly under-
temperature warning rate if its temperature increases en- inflated. Accordingly, when the low tire
ough for the rear differential oil tem- pressure telltale illuminates, you should
light perature warning light to illuminate. It is stop and check your tires as soon as
CAUTION advisable to have the rear differential possible, and inflate them to the proper
oil replaced as soon as possible. pressure. Driving on a significantly under-
Reduce vehicle speed and park the inflated tire causes the tire to overheat and
vehicle in a safe place as soon as & Low tire pressure can lead to tire failure. Under-inflation also
possible if the R.DIFF TEMP light reduces fuel efficiency and tire tread life,
warning light and may affect the vehicle’s handling and
illuminates. Continued driving with
this light illuminated can damage When the ignition switch is turned to the stopping ability.
the rear differential and other parts “ON” position, the low tire pressure warn- Please note that the TPMS is not a
of the powertrain. ing light will illuminate for approximately 2 substitute for proper tire maintenance,
seconds to check that the tire pressure and it is the driver’s responsibility to
If this light illuminates when the engine is monitoring system (TPMS) is functioning maintain correct tire pressure, even if
running, it may indicate that the rear properly. If there is no problem and all tires under-inflation has not reached the level
differential oil temperature is too hot. are properly inflated, the light will turn off. to trigger illumination of the TPMS low tire
Each tire, including the spare (if provided), pressure telltale.
If the light illuminates while driving, reduce should be checked monthly when cold Your vehicle has also been equipped with
vehicle speed and stop the vehicle at the and inflated to the inflation pressure a TPMS malfunction indicator to indicate
nearest safe place. recommended by the vehicle manufac- when the system is not operating properly.
Park the vehicle for several minutes. After turer on the vehicle placard or tire inflation The TPMS malfunction indicator is com-
the light turns off, you can start driving. pressure label. (If your vehicle has tires of bined with the low tire pressure telltale.
If the light does not turn off, contact the a different size than the size indicated on When the system detects a malfunction,
nearest SUBARU dealer for service. the vehicle placard or tire inflation pres- the telltale will flash for approximately one
sure label, you should determine the minute and then remain continuously
NOTE proper tire inflation pressure for those illuminated. This sequence will continue
. If the tire pressures are not correct tires.) upon subsequent vehicle start-ups as long
and/or the tires are not all the same as the malfunction exists. When the
size and brand, the rear differential will As an added safety feature, your vehicle
has been equipped with a tire pressure malfunction indicator is illuminated, the
be heavily loaded when the vehicle is system may not be able to detect or signal
driven, resulting in an abnormally high monitoring system (TPMS) that illuminates
a low tire pressure telltale when one or low tire pressure as intended. TPMS
oil temperature.
Instruments and controls 3-15
malfunctions may occur for a variety of serious vehicle damage and serious pressure should be checked peri-
reasons, including the installation of re- personal injury could occur. odically (at least monthly) using a
placement or alternate tires or wheels on If this light still illuminates while tire gauge. After any change to tire
the vehicle that prevent the TPMS from driving after adjusting the tire pres- pressure(s), the tire pressure mon-
functioning properly. Always check the sure, a tire may have significant itoring system will not re-check tire
TPMS malfunction telltale after replacing damage and a fast leak that causes inflation pressures until the vehicle
one or more tires or wheels on your the tire to lose air rapidly. If you have is first driven more than 20 mph (32
vehicle to ensure that the replacement or a flat tire, replace it with a spare tire km/h). Therefore, after adjusting the
alternate tires and wheels allow the TPMS as soon as possible. tire pressures, increase the vehicle
to continue to function properly. speed to at least 20 mph (32 km/h) to
When a spare tire is mounted or a start the TPMS re-checking of the
Should the warning light illuminate stea-
wheel rim is replaced without the tire inflation pressures. If the tire
dily after blinking for approximately one
original pressure sensor/transmitter pressures are now above the severe
minute, have the system inspected by
being transferred, the Low tire pres- low pressure threshold, the low tire
your nearest SUBARU dealer as soon as
sure warning light will illuminate pressure warning light should turn
possible.
steadily after blinking for approxi- off a few minutes later. Therefore, be
WARNING mately one minute. This indicates sure to install the specified size for
that the TPMS is unable to monitor the front and rear tires.
If this light does not illuminate all four road wheels. Contact your
briefly after the ignition switch is SUBARU dealer as soon as possible
turned ON or the light illuminates for tire and sensor replacement and/ & ABS warning light
steadily after blinking for approxi- or system resetting. If the light
mately one minute, you should have illuminates steadily after blinking The ABS warning light illuminates when
your Tire Pressure Monitoring Sys- for approximately one minute, the ignition switch is turned to the “ON”
tem checked at a SUBARU dealer as promptly contact a SUBARU dealer position and turns off after approximately 2
soon as possible. to have the system inspected. seconds.
If this light illuminates while driving, This is an indication that the ABS system
never brake suddenly and keep is working properly.
CAUTION
driving straight ahead while gradu-
ally reducing speed. Then slowly CAUTION
The tire pressure monitoring system
pull off the road to a safe place. is NOT a substitute for manually If the warning light behaves as
Otherwise an accident involving checking tire pressure. The tire follows, the ABS system may not
– CONTINUED –
3-16 Instruments and controls
the vehicle towed to the nearest SUBARU 4. If both warning lights illuminate again NOTE
dealer for repair. and remain illuminated after the engine This light does not turn off unless the
! Electronic Brake Force Distribution has been restarted, shut down the engine tank is replenished up to an internal
(EBD) system warning again, apply the parking brake, and check fuel quantity of approximately 4.0 US
the brake fluid level. gal (15 liters, 3.3 Imp gal).
The brake system warning light also
5. If the brake fluid level is not below the
illuminates if a malfunction occurs in the
“MIN” mark, the EBD system may be & Door open warning light
EBD system. In that event, it illuminates
malfunctioning. Drive carefully to the
together with the ABS warning light.
nearest SUBARU dealer and have the
The EBD system may be malfunctioning if system inspected.
the brake system warning light and ABS
6. If the brake fluid level is below the
warning light illuminate simultaneously
“MIN” mark, DO NOT drive the vehicle.
during driving.
Instead, have the vehicle towed to the
Even if the EBD system fails, the conven- nearest SUBARU dealer for repair.
tional braking system will still function.
However, the rear wheels will be more & Low fuel warning light
prone to locking when the brakes are
applied harder than usual and the vehi- CAUTION
cle’s motion may therefore become some-
what harder to control. Immediately put fuel in the tank
If the brake system warning light and ABS whenever the low fuel warning light
warning light illuminate simultaneously, illuminates. Engine misfires as a The indicators are located in the center
take the following steps. result of an empty tank could cause portion of the dashboard.
1. Stop the vehicle in the nearest safe, damage to the engine. When any of the doors or the rear gate is
flat place. not fully closed, it is indicated by the
2. Shut down the engine, apply the The low fuel warning light illuminates corresponding part of the door open
parking brake, and then restart it. when the tank is nearly empty approxi- warning light.
3. Release the parking brake. If both mately 2.6 US gal (10 liters, or 2.2 Imp
gal). It only operates when the ignition Always make sure this light is out before
warning lights turn off, the EBD system you start to drive.
may be malfunctioning. switch is in the “ON” position. When this
light illuminates, fill the fuel tank immedi-
Drive carefully to the nearest SUBARU ately.
dealer and have the system inspected.
– CONTINUED –
3-18 Instruments and controls
& Windshield washer & Vehicle Dynamics system has been deactivated.
fluid warning light Control operation indi- It illuminates in the event of a malfunction
cator light in the system or when the system is not
This light illuminates when the fluid level in operating.
the windshield washer fluid tank falls to This light illuminates when the ignition This warning light illuminates when the
the lower limit (approximately 0.6 US qt, switch is ON and turns off approximately 2 ignition switch is turned to the “ON”
0.6 liter, 0.5 Imp qt). seconds later. position and turns off several seconds
It blinks when the skid suppression func- after engine startup. It indicates that the
& All-Wheel Drive warn- tion is activated. It illuminates when only Vehicle Dynamics Control system is in
ing light the traction control function is operating. normal operation.
WARNING The Vehicle Dynamics Control system is ! Vehicle Dynamics Control warning
probably malfunctioning under any of the light
Continued driving with the AWD following conditions. Have your vehicle The Vehicle Dynamics Control system is
warning light flashing can lead to checked at a SUBARU dealer immedi- probably inoperative under any of the
powertrain damage. If the AWD ately. following conditions. Have your vehicle
warning light flashes, promptly park . The light does not illuminate when the checked at a SUBARU dealer immedi-
in a safe place then check whether ignition switch is turned to the “ON” ately.
all four tires are the same diameter position.
and whether any of the tires has a . The warning light does not illuminate
. The light does not turn off even after a when the ignition switch is turned to the
puncture or has lost air pressure for period of approximately 2 seconds after
some other reason. “ON” position.
the ignition switch has been turned to the . The warning light illuminates while the
“ON” position. vehicle is running.
The All-Wheel Drive warning light illumi-
nates when the ignition switch is turned to . If the electrical circuit of the Vehicle
& Vehicle Dynamics Dynamics Control system itself becomes
the “ON” position and turns off after the Control warning light/
engine has started. malfunctioning, the warning light only
Traction Control system illuminates. At this time, the ABS (Anti-
This light flashes if the vehicle is driven
with tires of different diameters fitted on its
OFF indicator light lock Brake System) remains fully opera-
wheels or with the air pressure exces- This warning light has both the function of tional.
sively low in any of its tires. indicating malfunctions in the Vehicle . The warning light illuminates when the
Dynamics Control system and the function electronic control system of the ABS/
of indicating that the Traction Control Vehicle Dynamics Control system be-
Instruments and controls 3-19
comes malfunctioning. . The warning light illuminates during & Security indicator light
driving, but it turns off immediately and
The Vehicle Dynamics Control system remains off.
provides its ABS control through the
electrical circuit of the ABS system. ! Traction Control system OFF indi-
Accordingly, if the ABS is inoperative, the cator light
Vehicle Dynamics Control system be- . It illuminates when the Traction Control
comes unable to provide ABS control. As system OFF switch is pressed.
a result, the Vehicle Dynamics Control . It also illuminates when the Traction
system also becomes inoperative, caus- Control system is deactivated.
ing the warning light to illuminate. Though
both the Vehicle Dynamics Control and NOTE
ABS systems are inoperative in this case, . The light may remain illuminated for
the ordinary functions of the brake system a while after the engine has been
are still available. You will be safe while started, especially in cold weather. This
driving with this condition, but have your The indicators are located in the center
does not indicate the existence of a portion of the dashboard.
vehicle checked at a SUBARU dealer as problem. The light should turn off as
soon as possible. soon as the engine has warmed up. This indicator light shows the status of the
. The indicator light illuminates when alarm system. It also indicates operation
NOTE of the immobilizer system.
the engine has developed a problem
If the warning light behavior is as and the CHECK ENGINE warning light/ ! Alarm system
shown in the following, the Vehicle Malfunction indicator lamp illuminates.
Dynamics Control system may be con- It blinks to show the driver the operational
sidered normal. The Vehicle Dynamics Control system is status of the alarm system. For detailed
. The warning light illuminates right probably malfunctioning under the follow- information, refer to “Alarm system” F2-
after the engine is started but turns off ing condition. Have your vehicle checked 16.
immediately, remaining off. at a SUBARU dealer as soon as possible. ! Immobilizer system
. The warning light illuminates after . The light does not turn off even after
This light blinks approximately 60 seconds
engine startup and turns off while the the lapse of several minutes (the engine
after the ignition switch is turned from
vehicle is subsequently being driven. has warmed up) after the engine has
“ON” position to the “Acc” or “LOCK”
started.
position or immediately after the key is
pulled out. Refer to “Immobilizer” F2-3.
– CONTINUED –
3-20 Instruments and controls
If the indicator light does not flash, it may & Select lever/Gear position in- & High beam indicator
indicate that immobilizer system may be dicator light
malfunctioning. Contact your nearest
SUBARU dealer immediately. This light shows that the headlights are in
the high beam mode.
In the event that an unauthorized key (for This indicator light also illuminates when
example, an unauthorized duplicate) is the headlight flasher is operated.
used, the security indicator light illumi-
nates. & Cruise control indica-
& SPORT mode indicator tor light
light The cruise control indicator light illumi-
nates when the ignition switch is turned to
This light illuminates when the ignition the “ON” position and turns off after
switch is turned to the “ON” position and approximately 3 seconds.
turns off after the engine has started.
This light illuminates when the “CRUISE”
When the select lever is moved to the The select lever/gear position indicator main switch is pressed.
manual gate, the SPORT mode is se- shows the position of the select lever.
lected and the indicator light illuminates. When manual mode is selected, the gear NOTE
Refer to “SPORT mode” F7-18. position indicator shows the current gear . If you move the cruise control lever
position and the upshift/downshift indica- or press the main switch button while
tor illuminates. Refer to “Automatic trans- turning the ignition switch “ON”, the
mission” F7-12. cruise control function is deactivated
and the cruise control indicator light
& Turn signal indicator flashes. To reactivate the cruise control
lights function, turn the ignition switch back
to the “Acc” or “LOCK” position, and
These lights show the operation of the turn then turn it again to the “ON” position.
signal or lane change signal. . If this indicator light and the CHECK
If the indicator lights do not blink or blink ENGINE warning light/malfunction in-
rapidly, the turn signal bulb may be burned dicator lamp flash simultaneously dur-
out. Replace the bulb as soon as possible. ing driving, have the vehicle checked
Refer to “Replacing bulbs” F11-38. by your nearest SUBARU dealer.
Instruments and controls 3-21
CAUTION
To ensure safety, do not attempt to
set the time during driving, as an
accident could result.
3-22 Instruments and controls
NOTE
If your vehicle is equipped with a
genuine SUBARU navigation system,
refer to the Owner’s Manual supple-
ment for the navigation system.
indication flashes to show that the road Multi function display (vehi- & Current fuel consumption
surface may be frozen.
cles without a genuine
If the outside temperature drops to 378F
(38C) or lower while the display is giving
SUBARU navigation system)
an indication other than the outside
temperature, the display switches to the NOTE
outside temperature indication and flashes . If your vehicle is equipped with a
for 5 seconds before returning to its genuine SUBARU navigation system,
original indication. refer to the Owner’s Manual supple-
If the display is already indicating an ment for the navigation system.
outside temperature of 378F (38C) or lower . A liquid-crystal display is used in
when the ignition switch is turned to the the multi function display. You will find
“ON” position, the indication does not its indications hard to see if you wear
flash. polarized glasses.
U.S.-spec. models
NOTE With the ignition switch in the “ON”
The outside temperature indication position, each successive push of the
may differ from the actual outside “INFO” button toggles the display in the
temperature. The road surface freeze following sequence.
warning indication should be treated
only as a guide. Be sure to check the
condition of the road surface before
driving.
– CONTINUED –
3-24 Instruments and controls
& Average fuel consumption Pressing the trip knob toggles the indica- & Driving range on remaining
tion between the average fuel consump- fuel
tion corresponding to the A trip meter
indication and the average fuel consump-
tion corresponding to the B trip meter
indication.
When either of the trip meter indications is
reset, the corresponding average fuel
consumption value is also reset.
NOTE
. The indicated values vary in accor-
dance with changes in the vehicle’s
running conditions. Also, the indicated
U.S.-spec. models values may differ slightly from the
actual values and should thus be U.S.-spec. models
treated only as a guide.
. When either trip meter indication is
reset, the average fuel consumption
corresponding to that trip meter indica-
tion is not shown until the vehicle has
subsequently covered a distance of 1
mile (or 1 km).
display is giving an indication other than Light control switch & Headlights
the journey time, the display switches to
the journey time, flashes for 5 seconds,
and returns to its original indication each WARNING
time a complete hour has elapsed.
To prevent battery discharge result-
NOTE ing from accidentally leaving your
The journey time is reset when the lights on when your vehicle is
ignition switch is turned to the “LOCK” parked, the light switch operates
position. It is also reset if the ignition only when the ignition switch is in
switch is turned to the “LOCK” or the “ON” position. In any other
“Acc” position prior to restarting of position, the vehicle’s lights will be
the engine. out.
If you park your vehicle on a road-
side at night, use the hazard warn- To turn on the headlights, turn the knob on
ing flasher to alert the other drivers. the end of the turn signal lever.
The light switch operates only when the first position
ignition switch is in the “ON” position. Parking lights, instrument panel illumina-
tion, tail lights and license plate light are
on.
second position
Headlights, parking lights, instrument pa-
nel illumination, tail lights, and license
plate light are on.
Instruments and controls 3-27
& High/low beam change (dim- & Headlight flasher & Daytime running light system
mer)
WARNING
The brightness of the illumination of
the high beam headlights is reduced
by the daytime running light system.
The light switch must always be
turned to the “ ” position when it
is dark outside.
– CONTINUED –
3-30 Instruments and controls
Dial position Number of front seat Number of 2nd seat Number of 3rd seat Load in the luggage Trailer towing
occupants occupants occupants compartment area
0 1 or 2 0 0 No load No
1 2 0 2 No load No
2 2 3 2 No load No
2 3 2 Full load No
3
2 3 2 Full load Yes
1 0 0 Full load No
4
1 0 0 Full load Yes
5 Not applicable Not applicable Not applicable Not applicable Not applicable
Instruments and controls 3-31
. Grease, wax, insects or other mate- ! Windshield wipers ! Mist (for a single wipe)
rial on the windshield or the wiper
blades results in jerky wiper operation
and streaking on the glass. If you
cannot remove those streaks after
operating the washer or if the wiper
operation is jerky, clean the outer sur-
face of the windshield or rear window
and the wiper blades using a sponge or
soft cloth with a neutral detergent or
mild-abrasive cleaner. After cleaning,
rinse the window glass and wiper
blades with clean water. The glass is
clean if no beads form on the glass
when you rinse with water. OFF: Off For a single wipe of the wipers, pull the
. If you cannot eliminate the streaking : Intermittent lever toward you. The wipers operate until
even after following this procedure, LO: Low speed you release the lever.
replace the wiper blades with new HI: High speed
ones. For replacement instructions, ! Wiper intermittent time control
refer to “Replacement of wiper blades” To turn the wipers on, push the wiper
F11-31. control lever down.
To turn the wipers off, return the lever to
& Windshield wiper and washer the “OFF” position.
switches
The wiper operates only when the ignition
switch is in the “ON” or “Acc” position.
– CONTINUED –
3-34 Instruments and controls
When the wiper switch is in the “ ” NOTE & Rear window wiper and
position, turn the dial to adjust the operat- washer switch
ing interval of the wiper.
The operating interval can be adjusted in
nine steps.
The intermittent operation interval varies
depending on the vehicle speed in any of
the adjustment steps (longer when the
vehicle speed is low; shorter when the
vehicle speed is high).
! Washer
speed is low; shorter when the vehicle Windshield wiper deicer the control switch to turn it on again.
speed is high).
Your SUBARU dealer can set your wind-
When you subsequently move the select shield wiper deicer to the continuous
lever of the automatic transmission to the operation mode. Contact your SUBARU
“R” position, the rear wiper will switch to dealer for details.
continuous operation. When you move the
select lever from the “R” position to some Once the windshield wiper deicer has
other position, the rear wiper will return to been set to the continuous operation
intermittent operation. mode, it should be in the continuous
! Washer operation mode at any time when the
control switch is pushed to the “ON”
To wash the rear window while the rear position.
wiper is operating, turn the knob on the
end of the wiper control lever upward to If the battery voltage drops below the
the “ ” position. The washer fluid sprays permissible level, continuous operation of
until you release the knob. the windshield wiper deicer is canceled
The windshield wiper deicer operates only
To wash the rear window when the rear and the system stops operating.
when the ignition switch is in the “ON”
wiper is not in use, turn the knob on the position.
end of the wiper control lever downward to CAUTION
the “ ” position. The washer fluid sprays To turn on the windshield wiper deicer,
push the control switch. The indicator light To prevent the battery from being
and the wiper operates until you release
located on the switch illuminates while the discharged, do not operate the
the knob.
windshield wiper deicer is operating. windshield wiper deicer continu-
ously for any longer than necessary.
To turn it off, push the control switch again.
It also turns off when the ignition switch is
turned to the “Acc” or “LOCK” position. NOTE
. Turn on the windshield wiper deicer
The windshield wiper deicer will automa- if the wipers are frozen to the wind-
tically shut off after approximately 15 shield.
minutes. If the windshield wiper blades . If the windshield is covered with
have been deiced completely before that snow, remove the snow so that the
time, push the control switch to turn it off. If windshield wiper deicer works effec-
deicing is not complete, you have to push
– CONTINUED –
3-36 Instruments and controls
tively. Rear window defogger but- before that time, push the control switch
. While the windshield wiper deicer is to turn it off. If defrosting or defogging is
in the continuous operation mode, if
ton not complete, you have to push the control
the vehicle speed remains at 9 mph (15 switch to turn it on again.
km/h) or less for 15 minutes, the wind- Your SUBARU dealer can set your rear
shield wiper deicer automatically stops window defogger to the continuous opera-
operating. tion mode. Contact your SUBARU dealer
for details.
Once the rear window defogger has been
set to the continuous operation mode, it
should be in the continuous operation
mode at any time when the control switch
is pushed to the “ON” position.
If the battery voltage drops below the
permissible level, continuous operation of
The rear window defogger operates only the rear window defogger is canceled and
when the ignition switch is in the “ON” the system stops operating.
position.
CAUTION
To turn on the defogger, push the control
switch that is located on the climate . Do not use sharp instruments or
control panel. The indicator light located window cleaner containing abra-
on the control switch illuminates while the sives to clean the inner surface
rear window defogger is operating. of the rear window. They may
damage the conductors printed
To turn it off, push the control switch again. on the window.
It also turns off when the ignition switch is
turned to the “Acc” or “LOCK” position. . To prevent the battery from being
discharged, do not operate the
The defogger will automatically shut off defogger continuously for any
after approximately 15 minutes. If the rear longer than necessary.
window has been cleared completely
Instruments and controls 3-37
NOTE Mirrors & Type B inside mirror (if
The outside mirror defogger also oper- equipped)
ates while the rear window defogger is Always check that the inside and outside
operating. mirrors are properly adjusted before you
start driving.
– CONTINUED –
3-38 Instruments and controls
– CONTINUED –
3-40 Instruments and controls
& Type C inside mirror (if or off. When the compass is on, an sensors clean using a piece of dry soft
equipped) illuminated compass reading will appear cotton cloth or an applicator.
in the lower part of the mirror. ! Compass calibration
Even with the mirror in anti-glare mode, 1. For optimum calibration, switch off all
the mirror surface turns bright if the nonessential electrical accessories (rear
transmission is shifted into reverse. This window defogger, heater/air conditioning
is to ensure good rearward visibility during system, spotlight, etc.) and ensure all
reversing. doors are shut.
! Photosensors 2. Drive to an open, level area away from
large metallic objects or structures and
make certain the ignition switch is in the
“ON” position.
3. Press and hold the left button for 3
seconds then release, and the compass
1) Left button
will enter the calibration mode. “CAL” and
2) Auto dimming indicator direction will be displayed.
3) Photosensor 4. Drive slowly in a circle until “CAL”
4) Right button disappears from the display (approxi-
mately two or three circles). The compass
This mirror has an anti-glare feature which is now calibrated.
automatically reduces glare coming from
5. Further calibration may be necessary
headlights of vehicles behind you. It also
should outside influences cause the mirror
contains a built-in compass.
The mirror has a photosensor attached on to read inaccurately. You will know that
. By pressing and releasing the left this has occurred if your compass begins
button, the automatic dimming function is both the front and back sides. If the glare
from the headlights of vehicles behind you to read in only limited directions. Should
toggled on or off. When the automatic you encounter this situation, return to step
dimming function is on, the auto dimming strikes the mirror, these sensors detect it
and make the reflection surface of the one of the above procedure and recali-
indicator light (green) located to the right brate the mirror.
of the button will illuminate. mirror dimmer to help prevent you from
being blinded. For this reason, use care
. By pressing and releasing the right not to cover the sensors with stickers, or
button, the compass display is toggled on other similar items. Periodically wipe the
Instruments and controls 3-41
! Compass zone adjustment & Outside mirrors ! Remote control mirror switch
1. The zone setting is factory preset to
Zone 8. Refer to the “Compass calibration
zone” map attached to the end of this
manual to verify that the compass zone
setting is correct for your geographical
location.
2. Press and hold the right button for 3
seconds then release, and the word
“ZONE” will briefly appear and then the
zone number will be displayed.
3. Press the right-hand button repeatedly
to cycle the display through all possible
zone settings. Stop cycling when the
correct zone setting for your location is ! Convex mirror (passenger side) The remote control mirrors operate only
displayed. when the ignition switch is in the “ON” or
“Acc” position.
4. Releasing the button for 3 seconds will WARNING
exit the zone setting mode. 1. Turn the knob to the “L” side to adjust
Objects look smaller in a convex the left-hand mirror or to the “R” side to
mirror and farther away than when adjust the right-hand mirror.
viewed in a flat mirror. Do not use 2. Move the knob in the direction you
the convex mirror to judge the want to move the mirror.
distance of vehicles behind you 3. Return the knob to the neutral position
when changing lanes. Use the inside to prevent unintentional operation.
mirror (or glance backwards) to
determine the actual size and dis- The mirrors can also be adjusted manu-
tance of objects that you view in ally.
convex mirror.
– CONTINUED –
3-42 Instruments and controls
Tilt steering wheel 5. Make sure that the steering wheel is Horn
securely locked by moving it up and down.
WARNING
Do not adjust the steering wheel tilt
position while driving. This may
cause loss of vehicle control and
result in personal injury.
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
Climate control
Ventilator
& Airflow
*: If equipped
– CONTINUED –
4-4 Climate control
Passenger’s side
It is possible to make separate tempera-
ture settings for the driver’s side and
passenger’s side. Each temperature
Climate control 4-7
! – Defroster button system to the AUTO mode by pushing intensity of the sunlight, etc.
the “AUTO” button or turn off by pushing ! A/C – Air conditioner button
the “OFF” button.
Alternatively, push the “ ” button again
to return the system to the setting that was
selected before you activated the defros-
ter.
! Fan speed control dial
– CONTINUED –
4-8 Climate control
NOTE
When driving on a dusty road or behind
a vehicle that emits unpleasant exhaust
gases, set the air inlet selection button
Select the desired airflow mode by push- to the ON position.
ing the airflow mode selection button. The From time to time, return the air inlet
selected airflow mode is shown on the selection button to the OFF position to
center of the dial. draw outside air into the passenger
compartment.
There are five airflow modes that activate
the following air outlets.
(Ventilation): Instrument panel outlets ON position (recirculation): Interior air is
recirculated inside the vehicle. Push the
(Bi-level): Instrument panel outlets and air inlet selection button to the ON position
foot outlets for fast cooling with the air conditioner or
(Heat): Foot outlets, both side outlets of when driving on a dusty road. The
the instrument panel and some through indicator light will illuminate.
windshield defroster outlets (A small OFF position (outside air): Outside air is
amount of air flows to the windshield and drawn into the passenger compartment.
both side windows to prevent fogging.) Push the air inlet selection button to the
OFF position when the interior has cooled
(Heat-def): Windshield defroster out- to a comfortable temperature and the road
lets, foot outlets and both side outlets of is no longer dusty. The indicator light will
Climate control 4-9
& Rear air conditioner . The outlet air temperature of the rear – Do not cover the sensors.
air conditioner cannot be adjusted.
. The rear air conditioner cannot be The sensors are located as follows.
used as a heater. – Solar sensor: beside windshield
defroster grille
& Temperature sensors – Interior air temperature sensor: on the
side of the driver-side part of the center
panel
– Outside temperature sensor: behind
front grille
Operating tips for heater and heated interior. This results in quicker system.
cooling by the air conditioner. Keep the
air conditioner windows closed during the operation of & Air conditioner compressor
& Cleaning ventilator grille the air conditioner for maximum cooling shut-off when engine is
efficiency. heavily loaded
To improve acceleration and gas mileage,
& Lubrication oil circulation in the air conditioner compressor is designed
the refrigerant circuit to temporarily shut off during air condi-
Operate the air conditioner compressor at tioner operation whenever the accelerator
a low engine speed (at idle or low driving is fully depressed such as during rapid
speeds) a few minutes each month during acceleration or when driving on a steep
the off-season to circulate its oil. upgrade.
– CONTINUED –
4-12 Climate control
4. Remove the air filter cover by detach- 6. Replace the air filter with a new one. 10. Secure the glove box with the one clip.
ing the five clips. 7. Install the air filter cover. 11. Install the instrument panel side cover.
8. Install the glove box.
5. Unhook the air filter and draw it out. 12. Label installation
9. Attach the strap to the hook. Attach the caution label to the driver’s
door.
Climate control 4-13
CAUTION
Contact your SUBARU dealer if the
following occurs, even if it is not yet
time to change the filter.
– Reduction of the airflow through
the vents.
– Windshield gets easily fogged or
misted.
NOTE
The filter can influence the air condi-
tioning, heating and defroster perfor-
mance if not properly maintained.
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
Audio
Antenna system .................................................. 5-2 Type B audio set (if equipped).......................... 5-15
Printed antenna................................................... 5-2 Radio operation ................................................. 5-15
FM reception ....................................................... 5-2 Built in CD changer operation ............................ 5-21
Installation of accessories.................................. 5-2 Audio control buttons ....................................... 5-26
Audio set ............................................................. 5-3 MODE button ..................................................... 5-26
Type A audio set ................................................. 5-3 Auxiliary input jack............................................ 5-28
Type B audio set ................................................. 5-3 Rear Seat Entertainment (RSE) system
Type A audio set (if equipped) ........................... 5-4 operation (if equipped) ................................... 5-29
Radio operation................................................... 5-4 Precautions to observe when handling a 5
Compact disc player operation ........................... 5-10 compact disc................................................... 5-29
5-2 Audio
Antenna system any other material over the antenna Installation of accessories
portion of the rear window glass.
& Printed antenna Always consult your SUBARU dealer
& FM reception before installing a citizen band radio or
CAUTION other transmitting device in your vehicle.
Although FM is normally static free, Such devices may cause the electronic
Do not use sharp instruments or reception can be affected by the surround- control system to malfunction if they are
window cleaner containing abra- ing area, atmospheric conditions, station incorrectly installed or if they are not
sives to clean the inner surface of strength and transmitter distance. Build- suited for the vehicle.
the window on which the antenna is ings or other obstructions may cause
printed. Doing so may damage the momentary static, flutter or station inter-
antenna printed on the window. ference. If reception continues to be
unsatisfactory, switch to a stronger station.
NOTE
If a cell phone is placed near the radio,
it may cause the radio to emit noise
when it receives calls. This noise does
not indicate a radio malfunction.
– CONTINUED –
5-6 Audio
! XMTM satellite radio (for U.S.A. only) ready because each tuner is identified by category, and press “ ” again to select
its unique satellite radio tuner ID. the previous category.
XMTM is a continental U.S. based satellite
radio service, including music, news, The satellite radio ID will be needed when ! Channel scan
sports, talk and children’s programming. you activate satellite radio and receive
satellite radio customer support. Press the “SCAN” button (8) to change the
XMTM provides digital quality audio and radio to the SCAN mode. In this mode, the
text information, including song title and The satellite radio ID can be found on the
audio display by tuning the channel to “0”. radio scans through the channels until a
artist name. A service fee is required to station is found. The radio will stop at the
receive the XMTM service. For more Turn the “TUNE TRACK” button (4) to station for 5 seconds while displaying the
information, contact XMTM at select the satellite radio channel. channel number, after which scanning will
w w w. x m r a d i o . c o m o r c a l l 1 - 8 0 0 - continue until the entire channel has been
! Band selection button
XMRADIO (1-800-967-2346). scanned from the low end to the high end.
Push the “SAT” button (1) when the radio
! Satellite radio reception is off to turn on the radio. Also during the category selection, chan-
Satellite radio signals are best received in Push the “SAT” button when the radio is nel scan can be performed in that cate-
areas with a clear view of the open sky. In on to select SAT1, SAT2 or SAT3 recep- gory.
areas where there are tall buildings, trees, tion. Press the “SCAN” button again to cancel
tunnels or other structures that may the SCAN mode and to stop on any
obstruct the signal of the satellites, there ! Channel selection displayed channel.
may be signal interruptions. Other circum- Press “ ” of the “TUNE TRACK” button ! Selecting preset channels
stances that may result in signal loss (4) to select the next channel and press
include driving near a wall, steep cliff or “ ” of the button to select the previous Presetting a channel with a preset button
hill, or driving on the lower level of a multi- channel. (10) allows you to select that channel in a
tiered road or inside a parking garage. Keep pressing “ ” of the button to single operation. Up to six, SAT1, SAT2
change to the next channel continuously and SAT3 channels each may be preset.
To help reduce this condition, satellite
and keep pressing “ ” of the button to ! How to preset channels
radio providers have installed ground-
change to the previous channel continu-
based repeaters in heavily populated 1. Press the “SAT” button (1) to select
ously.
areas. However, you may still experience SAT1, SAT2 and SAT3 reception.
reception problems in some areas. ! Category selection 2. Press the “SCAN” button (8) or the
! Displaying satellite radio ID of tuner Press “ ” or “ ” of the “SEEK FLDR” “TUNE TRACK” button (4) to select the
button (7) to display the current category. channel.
When you activate satellite radio, you
Press “ ” again to select the next 3. Press one of the preset buttons (10)
should have your satellite radio tuner ID
Audio 5-9
– CONTINUED –
5-10 Audio
. If you insert a disc that cannot be of the next track/file (track). Each time this select the first track/file (track) on the
played by the player, “CHECK DISC” side of the button is pressed, the indicated disc and start playing it.
will appear on the display and the track/file (track) number will increase.
player will revert to the previously ! Fast-reversing
selected mode. NOTE Press the “ ” side of the “TUNE TRACK”
. The player is designed to be able to In an MP3 folder, skipping past the last button (2) continuously to fast-reverse the
play music CD-Rs and music CD-RWs, track/file (track) will take you back to track/file (track).
but it may not be able to play certain the first track/file (track) in the folder. Release the button to stop fast-reversing.
ones.
. CDs (i.e., 8 cm/3 inch CDs) are not ! Backward direction NOTE
supported, and if inserted, they will be Briefly press the “ ” side of the “TUNE If you fast-reverse to the beginning of
immediately ejected. TRACK” button (2) to skip to the beginning the first track/file (track) on the disc,
of the current track/file (track). Each time the fast-reversing will stop and the
! When CD is in the player this side of the button is pressed, the player will start playing the first track/
When the “CD” button (1) is pressed, the indicated track/file (track) number will file (track) on the disc.
player will start playback. decrease.
! Folder selection (MP3 disc)
NOTE NOTE Press the “ ” side of the “SEEK FLDR”
After the last song finishes, the player In an MP3 folder, skipping past the last button (4) briefly to select the next folder.
will automatically return to track 1 (the track/file (track) will take you back to Pressing the “ ” side of the same button
first song on the disc). the first track/file (track) in the folder. the first time makes the player go back to
the beginning of the currently selected file;
! To stop playback of a CD ! Fast-forwarding and fast-reversing
pressing it a second time makes it go back
When the “PUSH POWER” button is ! Fast-forwarding to the previously selected file.
pressed during playback of a CD, the CD
stops playing temporarily. To let the CD Press the “ ” side of the “TUNE TRACK” NOTE
resume playing, press the button again. button (2) continuously to fast-forward the Only MP3 folders are recognized when
track/file. an attempt to select the next or pre-
! To select a song from its beginning Release the button to stop fast-forwarding. vious folder is made. If no appropriate
! Forward direction folder exists on the disc, pressing the
NOTE “ ” or “ ” side of the “SEEK FLDR”
Briefly press the “ ” side of the “TUNE If you fast-forward past the last track/
TRACK” button (2) to skip to the beginning button has no effect.
file (track) on the disc, the player will
– CONTINUED –
5-12 Audio
! Repeating – Press the “RDM” button cancel the folder repeat-play mode,
! To repeat the currently playing track/ – Press the “SCAN” button press it again to reselect the folder
file (track) – Press the “ ” button repeat-play mode.
– Select the radio mode . The folder repeat-play mode will be
To repeat a track/file (track), briefly press cancelled if you perform any of the
the “RPT” button (6) while the track/file – Press the “RSE AUX” button
– Press the “ ” or “ ” side of the following steps.
(track) is playing. The display will show
“SEEK FLDR” button (MP3 disc) – Press the “RDM” button
“RPT”, and the track/file (track) will be
repeated. – Turn off the power of the audio – Press the “SCAN” button
equipment – Press the “ ” button
To cancel the track/file (track) repeat-play
mode: – Turn the ignition switch to the – Select the radio mode
Press the “RPT” button once (non-MP3 “LOCK” position – Press the “RSE AUX” button
disc) – Press the “ ” or “ ” side of the
! To repeat the currently playing folder “SEEK FLDR” button (MP3 disc)
Press the “RPT” button twice (MP3 disc) (MP3 disc)
The “RPT” indication will turn off, and the – Turn off the power of the audio
normal playback mode will be resumed. To repeat the currently playing folder, equipment
press the “RPT” button (6) twice while a – Turn the ignition switch to the
NOTE file (track) is playing. The display will show “LOCK” position
. With an MP3 disc inserted, each “F-RPT”, and the folder will be played
repeatedly. ! Random playback
time you briefly press the button, the
mode will change to the next one in the To cancel the folder repeat-play mode, ! Non-MP3 disc
following sequence. press the “RPT” button once more. The
“F-RPT” indication will turn off, and the Press the “RDM” button (5) briefly during
normal playback mode will be resumed. disc playback to play all of the tracks on
the disc in a random order. The display will
If you accidentally press the button and
NOTE show “RDM”, and all of the tracks on the
. Each time you briefly press the disc will be played in a random order.
cancel the track/file (track) repeat-play
button, the mode will change to the To cancel random mode, press the button
mode, press it again to reselect the
next one in the following sequence. again. The “RDM” indication will turn off,
repeat-play mode.
and the normal playback mode will be
. The repeat-play mode will be can-
resumed.
celed if you perform any of the follow-
ing steps.
If you accidentally press the button and
Audio 5-13
NOTE next one in the following sequence. selected one. After all tracks/files (tracks)
Random playback will be cancelled if on the disc/folder has been scanned,
you perform any of the following steps. normal playback mode is restored.
. Press the “RPT” button To cancel a scan, press the button again.
. Press the “SCAN” button
. Press the “ ” button NOTE
. Select the radio mode The scan mode will be cancelled if you
. Press the “RSE AUX” button If you accidentally press the button and perform any of the following opera-
. Press the “ ” or “ ” side of the cancel the random mode, press it again tions.
“SEEK FLDR” button to reselect the random mode. . Press the “RPT” button
. Turn off the power of the audio . Random playback will be cancelled . Press the “RDM” button
equipment if you perform any of the following . Press the “ ” button
. Turn the ignition switch to the steps. . Press the “ ” or “ ” side of the
“LOCK” position – Press the “RPT” button “TUNE TRACK” button
– Press the “SCAN” button . Press the “ ” or “ ” side of the
! MP3 disc – Press the “ ” button “SEEK FLDR” button (MP3 disc)
Press the “RDM” button (5) during disc – Select the radio mode . Select the radio mode
playback to play all of the tracks in the – Press the “RSE AUX” button . Press the “RSE AUX” button
folder currently being played in random . Turn off the power of the audio
– Press the “ ” or “ ” side of the
order. Press the “RDM” button again to equipment
“SEEK FLDR” button
play all of the tracks on the disc in random . Turn the ignition switch to the
– Turn off the power of the audio “LOCK” position
order. The display will show “RDM” during equipment
the random mode.
– Turn the ignition switch to the ! To eject a disc from the player
To cancel the random mode, press the “LOCK” position
“RDM” button during “in-disc” random When a disc is being played back or when
playback. The “RDM” indication will turn ! Scan a disc is in the player, press the “ ”
off, and the normal playback mode will be button (8). The disc will be ejected.
The scan mode lets you listen to the first
resumed. 10 seconds of each track/file (track) on the NOTE
NOTE disc/folder in succession. Press the . Avoid driving the vehicle with a CD
“SCAN” button (7) to start scanning sticking out, because vibration might
. Each time you briefly press the through all tracks upward beginning with
button, the mode will change to the make it fall out.
the track/file (track) following the currently
– CONTINUED –
5-14 Audio
– CONTINUED –
5-16 Audio
– CONTINUED –
5-18 Audio
! XMTM satellite radio (for U.S.A. only) ready because each tuner is identified by category, and press “ ” again to select
its unique satellite radio tuner ID. the previous category.
XMTM is a continental U.S. based satellite
radio service, including music, news, The satellite radio ID will be needed when ! Channel scan
sports, talk and children’s programming. you activate satellite radio and receive
satellite radio customer support. Press the “SCAN” button (8) to change the
XMTM provides digital quality audio and radio to the SCAN mode. In this mode, the
text information, including song title and The satellite radio ID can be found on the
audio display by tuning the channel to “0”. radio scans through the channels until a
artist name. A service fee is required to station is found. The radio will stop at the
receive the XMTM service. For more Turn the “TUNE/TRACK” button (4) to station for 5 seconds while displaying the
information, contact XMTM at select the satellite radio channel. channel number, after which scanning will
w w w. x m r a d i o . c o m o r c a l l 1 - 8 0 0 - continue until the entire channel has been
! Band selection button
XMRADIO (1-800-967-2346). scanned from the low end to the high end.
Push the “SAT” button (1) when the radio
! Satellite radio reception is off to turn on the radio. Also during the category selection, chan-
Satellite radio signals are best received in Push the “SAT” button when the radio is nel scan can be performed in that cate-
areas with a clear view of the open sky. In on to select SAT1, SAT2 or SAT3 recep- gory.
areas where there are tall buildings, trees, tion. Press the “SCAN” button again to cancel
tunnels or other structures that may the SCAN mode and to stop on any
obstruct the signal of the satellites, there ! Channel selection displayed channel.
may be signal interruptions. Other circum- Press “ ” of the “TUNE TRACK” button ! Selecting preset channels
stances that may result in signal loss (4) to select the next channel and press
include driving near a wall, steep cliff or “ ” of the button to select the previous Presetting a channel with a preset button
hill, or driving on the lower level of a multi- channel. (10) allows you to select that channel in a
tiered road or inside a parking garage. Keep pressing “ ” of the button to single operation. Up to six, SAT1, SAT2
change to the next channel continuously and SAT3 channels each may be preset.
To help reduce this condition, satellite
and keep pressing “ ” of the button to ! How to preset channels
radio providers have installed ground-
change to the previous channel continu-
based repeaters in heavily populated 1. Press the “SAT” button (1) to select
ously.
areas. However, you may still experience SAT1, SAT2 and SAT3 reception.
reception problems in some areas. ! Category selection 2. Press the “SCAN” button (8) or the
! Displaying satellite radio ID of tuner Press “ ” or “ ” of the “SEEK FLDR” “TUNE TRACK” button (4) to select the
button (7) to display the current category. channel.
When you activate satellite radio, you
Press “ ” again to select the next 3. Press one of the preset buttons (10)
should have your satellite radio tuner ID
– CONTINUED –
5-20 Audio
NOTE
. Be sure to insert a disc with the label
side up. If you insert the disc the label
side down, “CHECK DISC” will appear
on the display and the player will not
play anything.
. If a disc is inserted during a radio
broadcast, the disc will interrupt the
broadcast.
. The player is designed to be able to
play music CD-Rs and music CD-RWs,
but it may not be able to play certain
ones.
. CDs (i.e., 8 cm/3 inch CDs) are not
supported, and if inserted, they will be
immediately ejected.
. Insert discs slowly, one at a time.
Inserting discs one over another could
result in malfunction of the CD chan-
ger.
– CONTINUED –
5-22 Audio
! How to insert a CD(s) ! Inserting a disc in a desired position button (10) for more than 1.5 seconds, the
player will produce beep sound and will
! Inserting a CD 1. Briefly press the “LOAD” button (10). If
enter the full disc loading mode.
the magazine in the player has an idle
1. Briefly press the “LOAD” button (10). If position where you can insert a disc, the 2. A “disc number” indicator will blink,
the magazine in the player has an idle disc number indicator associated with the and “ALL LOAD” will be on display for a
position where you can insert a disc, the idle position will blink. period of 15 seconds. If a disc is success-
disc number indicator associated with the fully loaded during this period, the disc
The positions in the magazine the indica-
idle position will blink. number indicator will stop blinking and will
tor of which steadily lights up are already
If no indicator blinks, it means that there is steadily light.
loaded with discs.
no idle position in the magazine. 3. When the loading of a disc is com-
2. Press the disc select button (9) at the
2. After the disc number indicator has plete, the next disc number indicator will
position where you want to insert a disc.
started to flash, insert the disc when blink. Then repeat Step 2.
3. Insert the disc when “LOAD” flashes
“LOAD” flashes on the display. The disc 4. When the magazine is filled with discs
on the display. The disc will then be
will then be automatically drawn in, and by repeating Steps 2 and 3, the player will
automatically drawn in, and the player will
the player will begin to play back the first start playback of the discs, beginning with
begin to play the first track on the disc.
track of the disc. the one inserted first.
. If you wish to insert another disc,
. To insert more discs in succession, If you fail to insert any disc during each 15
repeat the procedure beginning with step
repeat Steps 1 and 2. The magazine will seconds interval, the full disc loading
1.
be loaded with discs in the ascending mode will be canceled, and the player will
If you do not insert any disc in 15 seconds start playback of the disc inserted first.
order of position number.
after you have pressed the “LOAD” button,
If you do not insert any disc in 15 seconds the player will begin to play back the first ! How to play back a CD or make a
after you have pressed the “LOAD” button, track of the last disc you have inserted. pause
the player will begin to play back the first
. While the player is in the loading mode, ! When there is no CD inserted:
track of the last disc you have inserted.
if you press “FM AM” button, the player will
. The disc indicator steadily lights up if a enter standby mode. Press the “CD” Properly insert a CD. Refer to “How to
disc is already inserted in the correspond- button (1) to start playback. insert a CD(s)” F5-22.
ing position of the magazine. When a CD is loaded, the player will start
. While the player is in the loading mode, ! Loading all the magazine (full disc playback of the CD, beginning with the
if you press “FM AM” button, the player will loading mode) first track.
enter the standby mode. Press the “CD”
button (1) to start playback. 1. If you continue to press the “LOAD”
Audio 5-23
– Press the disc select button mode, press it again to reselect the NOTE
– Select the radio mode disc/folder repeat-play mode. Random playback will be cancelled if
– Press the “RSE AUX” button . The disc/folder repeat-play mode you perform any of the following steps.
– Press the “ ” or “ ” side of the will be cancelled if you perform any of . Press the “RPT” button
“SEEK FLDR” button (MP3 disc) the following steps. . Press the “SCAN” button
– Turn off the power of the audio – Press the “RDM” button . Press the “ ” button
equipment – Press the “SCAN” button . Select the radio mode
– Turn the ignition switch to the – Press the “ ” button . Press the “RSE AUX” button
“LOCK” position – Press the disc select button . Press the “ ” or “ ” side of the
– Select the radio mode “SEEK FLDR” button
! To repeat the currently playing disc/ – Press the “RSE AUX” button . Turn off the power of the audio
folder – Press the “ ” or “ ” side of the equipment
To repeat the currently playing disc/folder, “SEEK FLDR” button (MP3 disc) . Turn the ignition switch to the
press the “RPT” button (6) twice while a – Turn off the power of the audio “LOCK” position
track/file (track) is playing. The display will equipment
show “D-RPT”, and the disc/folder will be ! MP3 disc
– Turn the ignition switch to the
played repeatedly. “LOCK” position Press the “RDM” button (5) during disc
To cancel the disc/folder repeat-play playback to play all of the tracks in the
mode, press the “RPT” button once more. ! Random playback folder currently being played in random
The “D-RPT” indication will turn off, and order. Press the “RDM” button again to
! Non-MP3 disc play all of the tracks on the disc in random
the normal playback mode will be re-
sumed. Press the “RDM” button (5) briefly during order. The display will show “RDM” during
disc playback to play all of the tracks on the random mode.
NOTE the disc in a random order. The display will To cancel the random mode, press the
. Each time you briefly press the show “RDM”, and all of the tracks on the “RDM” button during “in-disc” random
button, the mode will change to the disc will be played in a random order. playback. The “RDM” indication will turn
next one in the following sequence. To cancel random mode, press the button off, and the normal playback mode will be
again. The “RDM” indication will turn off, resumed.
and the normal playback mode will be
resumed. NOTE
If you accidentally press the button and . Each time you briefly press the
cancel the disc/folder repeat-play button, the mode will change to the
Audio 5-25
next one in the following sequence. normal playback will be resumed. To ! Page (track/folder title) scroll (MP3
cancel the scan mode, press the button disc)
again. If, having pressed the “AUDIO” button (3)
NOTE to select track title or folder title display,
you press the “AUDIO” button again for
The scan mode will be cancelled if you less than 0.5 second, the title will be
If you accidentally press the button and perform any of the following steps.
cancel the random mode, press it again scrolled so you can see all of it. You will
. Press the “RPT” button see eight characters at a time.
to reselect the random mode. . Press the “RDM” button
. Random playback will be cancelled . Press the “ ” or “ ” side of the NOTE
if you perform any of the following “TUNE TRACK” button
steps. The display is designed to show titles
. Press the “ ” or “ ” side of the for up to three pages (64 characters in
– Press the “RPT” button “SEEK FLDR” button (MP3 disc) total).
– Press the “SCAN” button . Press the “ ” button
– Press the “ ” button . Press the disc select button ! Folder selection (MP3 disc)
– Select the radio mode . Select the radio mode Press the “ ” side of the “SEEK FLDR”
– Press the “RSE AUX” button . Press the “RSE AUX” button button (4) briefly to select the next folder.
– Press the “ ” or “ ” side of the . Turn off the power of the audio Pressing the “ ” side of the same button
“SEEK FLDR” button equipment the first time makes the player go back to
– Turn off the power of the audio . Turn the ignition switch to the the beginning of the currently selected file;
equipment “LOCK” position pressing it a second time makes it go back
– Turn the ignition switch to the to the previously selected file.
! Display selection (MP3 disc)
“LOCK” position
If you press the “AUDIO” button (3) during NOTE
! SCAN playback, the indication will change to the Only MP3 folders are recognized when
The scan mode lets you listen to the first next one in the following sequence. an attempt to select the next or pre-
10 seconds of each track/file (track) in vious folder is made. If no appropriate
succession. Press the “SCAN” button (7) folder exists on the disc, pressing the
to start scanning upward beginning with “ ” or “ ” side of the “SEEK FLDR”
the track/file (track) following the currently button has no effect.
selected one. When all tracks/files (tracks)
in the disc/folder have been scanned,
– CONTINUED –
5-26 Audio
! How to unload CDs from the player the player is in all disc ejection mode, Audio control buttons
the mode will be cancelled following
! Ejecting a CD from the player ejection of the disc that is currently These buttons are located on the spokes
Of the discs loaded, you can select and being ejected. of the steering wheel. They allow the
remove only one disc. . If you press the “CD” button while driver to control audio functions without
1. Use the disc select button (9) to select the player is in all disc ejection mode, taking his/her hands off the steering
the disc to be ejected. the player will draw in the discs that wheel.
2. Briefly press the “ ” button (8). The have been ejected and play them.
selected disc will be ejected. The disc & MODE button
number indicator will flash at this time.
When you remove the ejected disc, the
disc number indicator will turn off.
To remove more discs in succession,
repeat Steps 1 and 2.
! Ejecting all discs from the player (all
disc ejection mode)
1. If you continue to press the “ ” button
(8), the player will produce beep sound
and will enter the all disc ejection mode.
2. Remove the disc that has been
ejected. The other discs loaded will then
This button is used to select the desired
be ejected one after another. If you do not
audio mode. Each time it is pressed, the
remove the disc that has been ejected, the
mode changes to the next one in the
“All disc ejection mode” will be canceled.
following sequence.
NOTE
. Avoid driving the vehicle with a CD
sticking out, because vibration might
make it fall out.
. If you press the “ ” button while *1: The frequency last received in the selected
Audio 5-27
waveband will be displayed. file (track); pressing it the second time ! MUTE button
*2: Only when a CD is in the player. makes it go back to the previous track/file
*3: Only vehicle equipped with RSE (Rear Seat
(track).
Entertainment) The track/file (track) number will be shown
on the audio display.
! “ ” and “ ” buttons
! Volume control buttons
Auxiliary input jack 3. Play back the portable audio player. disconnection of the cord or malfunc-
Refer to the Owner’s Manual for the tions of the portable player.
portable audio player.
NOTE
. The output sound of the portable
audio player is not loud, and the sound
via the vehicle’s speakers that are
connected to the vehicle audio set
may be very low. If you turn up the
volume of the audio set, the volume
becomes louder. However, when you
change from one portable audio player
to another one, the volume levels via
the vehicle’s speakers may be signifi-
By connecting a commercial audio pro- cantly louder compared to the prior
duct to the vehicle, such as a portable device. To avoid a large volume differ-
audio player, you can hear its sound via ence, turn down the volume when you
the vehicle’s speaker. change between portable audio
An auxiliary (AUX) input jack is equipped players.
in the lower compartment of the center . In some cases, when the sound
console. A stereo mini pin plug (3.5ø) can volume of the portable audio player is
be inserted in this jack. The connection low, the sound becomes bad when you
cable is available at electrical appliance or turn up the volume of the vehicle audio
similar stores. system. In this case, adjust the sound
To use the AUX input jack: volume of the portable audio player.
. In some cases, noise occurs be-
1. Connect a portable audio player to the cause of a bad connection between the
AUX input jack. portable player and the vehicle audio
2. Press the “RSE AUX” button on the system. Try cleaning the stereo jack
audio control panel to turn on the auxiliary and audio plug.
audio input. . If noise is not reduced, check for
Audio 5-29
– CONTINUED –
5-30 Audio
Interior light ......................................................... 6-2 Cargo area cover (if equipped) ......................... 6-14
Dome light .......................................................... 6-2 Using the cover ................................................. 6-14
Cargo area light .................................................. 6-3 To remove the cover .......................................... 6-15
Rear gate light .................................................... 6-3 To install the cover housing ............................... 6-15
Map light............................................................. 6-3 Convenient tie-down hooks .............................. 6-16
Automatic ambient light for center console area Under-floor storage compartment .................... 6-16
(if equipped)...................................................... 6-4 HomeLink® Wireless Control System
Sun visors ........................................................... 6-4 (if equipped) .................................................... 6-17
Sun visor extension plate .................................... 6-5 Garage door opener programming in the
Vanity mirror with light ........................................ 6-5 U.S.A............................................................... 6-18
Storage compartment ......................................... 6-6 Programming rolling-code-protected garage door 6
Glove box ........................................................... 6-6 openers in the U.S.A. ....................................... 6-19
Center console box ............................................. 6-6 Programming for entrance gates and garage door
Rear console....................................................... 6-7 openers in Canada........................................... 6-20
Overhead console ............................................... 6-8 Programming other devices ............................... 6-20
Cup holder ........................................................... 6-8 Operating the HomeLink® Wireless Control
System ............................................................ 6-20
Front passenger’s cup holder .............................. 6-8
Reprogramming a single HomeLink® button ....... 6-20
Second-row seat cup holders .............................. 6-9
Erasing HomeLink® button memory.................... 6-21
Third-row seat cup holders .................................. 6-9
In case a problem occurs................................... 6-21
Bottle holders ...................................................... 6-9
Rear view camera (if equipped) ........................ 6-21
Accessory power outlets ................................... 6-10 How to use the rear view camera ....................... 6-22
Coat hook ........................................................... 6-12 Viewing range on the screen .............................. 6-23
Shopping bag hook............................................ 6-13 Help line............................................................ 6-24
Floor mat ............................................................ 6-13
6-2 Interior equipment
& Cargo area light & Rear gate light & Map light
– CONTINUED –
6-4 Interior equipment
CAUTION
. Always keep the storage com-
partment closed while driving to
reduce the risk of injury in the
event of sudden stops or an
accident.
. Do not store spray cans, contain-
ers with flammable or corrosive
liquids or any other dangerous
items in the storage compart-
ment. 1) Lock The center console box has a two-layer
2) Unlock structure consisting of an upper compart-
To open the glove box, pull the handle. To ment and a lower compartment.
close it, push the lid firmly upward.
To lock the glove box, insert the key and
turn it clockwise. To unlock the glove box,
insert the key and turn it counterclockwise.
Interior equipment 6-7
1) Upper compartment lock release 1) Lower compartment lock release The rear console is located in the back of
Pull up the upper compartment lock Pull up the lower compartment lock the center console box. Pull it out to use it.
release to open the upper compartment. release to open the lower compartment.
– CONTINUED –
6-8 Interior equipment
CAUTION
Take care to avoid spills. Beverages,
if hot, might burn you or your
passengers. Spilled beverages may
also damage upholstery or carpets.
& Second-row seat cup holders & Third-row seat cup holders Bottle holders
CAUTION
. Do not pick up a bottle from the
bottle holder or put a bottle in the
holder while you are driving, as
this may distract you and lead to
an accident.
. When placing a beverage in a
door pocket, make sure it is
capped. Otherwise, the beverage
could spill when opening/closing
A dual cup holder is built in the armrest. A cup holder is located at each side of the the door or while driving and, if
third-row seat. the beverage is hot, it could scald
CAUTION you.
CAUTION
When a cup containing a beverage
is in the cup holder, do not slide or When placing a beverage in a cup
recline any seat. Otherwise, the holder, make sure it is capped.
beverage could spill while driving Otherwise, the beverage could spill
and, if the beverage is hot, it could while driving and, if the beverage is
scald you. hot, it could scald you.
– CONTINUED –
6-10 Interior equipment
trim can be used to hold beverage bottles Accessory power outlets Accessory power outlets are provided in
and other items. the center console (lower compartment)
and in the rear cabin.
Electrical power (12V DC) from the battery
is available at any of the outlets when the
ignition switch is in either the “Acc” or “ON”
position.
You can use an in-vehicle electrical
appliance by connecting it to an outlet.
The maximum power rating of an appli-
ance that can be connected is shown in
the following list. Do not use an appliance
which exceeds the indicated wattage for
each outlet.
Power outlets in the center console . The two outlets in the center console:
120W or less (When using appliances
connected to two outlets simultaneously,
the total power consumed by them must
not exceed 120W.)
. The two outlets in the rear cabin: 120W
or less (When using appliances con-
nected to two outlets simultaneously, the
total power consumed by them must not
exceed 120W.)
CAUTION
. Do not attempt to use a cigarette
lighter in the accessory power
outlets.
Power outlets in the rear cabin . Do not place any foreign objects,
Interior equipment 6-11
compartment) and the lid. It is also Coat hook Hang clothing directly on the coat
possible to pass the cord through a hooks without using hangers.
groove in the lid and up to the center A coat hook is attached to each hand grip
console (upper compartment). for the outboard second-row passenger’s
seats. CAUTION
Never hang anything on the coat
hook that might obstruct the driver’s
view or that could cause injury in
sudden stops or in a collision. And
do not hang items on the coat hook
that weigh 11 lbs (5 kg) or more.
WARNING
Do not hang coat hangers or other
hard or pointed objects on the coat
hooks. If such items were hanging
on the coat hooks during deploy-
ment of the SRS curtain airbags,
they could cause serious injuries by
coming off the coat hooks and being
thrown through the cabin or by
preventing correct airbag deploy-
ment. Before hanging clothing on
the coat hooks, make sure there are
no pointed objects in the pockets.
Interior equipment 6-13
CAUTION
Do not hang items on the shopping
bag hook that weigh 11 lbs (5 kg) or
more.
CAUTION
A retaining pin is located on the driver’s
Make sure the driver’s floor mat is
side of the vehicle next to the fuel filler
placed back in its proper location
door release. Fit the grommet in the carpet
and correctly secured on its retain-
onto the pin to prevent the carpet from
ing pin. Also, do not use more than
moving.
one floor mat. If the floor mat slips
forward and interferes with the
A shopping bag hook is attached to each movement of the pedals during
side of the cargo area. driving, it could cause an accident.
6-14 Interior equipment
HomeLink® Wireless Control desired device. For details on the device garage door opener or other
types which can be operated by this device. Make sure that people
System (if equipped) system, consult the HomeLink website at and objects are out of the way
www.homelink.com or call 1-800-355- of the garage door opener or
3515. other device to prevent potential
harm or damage.
Note the following about this system:
If your vehicle is equipped with the . Do not use the HomeLink® Wire-
HomeLink® Wireless Control System, it less Control System with any
complies with Part 15 of the Federal garage door opener that lacks
Communication Commission Rules in the the safety stop and reverse fea-
U.S. and the RSS-210 of Industry Canada ture as required by applicable
in Canada. Its operation is subject to the safety standards. A garage door
following two conditions: opener which cannot detect an
object, signaling the door to stop
(1) this device may not cause harmful
and reverse, does not meet these
interference, and (2) this device must
safety standards. Using a garage
accept any interference received, includ-
1) HomeLink® buttons door opener without these fea-
ing interference that may cause undesired
2) Indicator light tures increases risk of serious
3) Hand-held transmitter* operation.
injury or death. For more infor-
* Not part of your vehicle’s remote Changes and modifications to this system mation, consult the HomeLink
keyless entry system but of a
HomeLink®-compatible device. by anyone other than an authorized website at www.homelink.com
service facility could void authorization to or call 1-800-355-3515.
The HomeLink® Wireless Control System, use this equipment.
located on the driver’s sun visor, is a
handy way to operate, from inside of your HomeLink and the HomeLink house are CAUTION
vehicle, up to three remote-controlled registered trademarks of Johnson Con-
indoor and outdoor devices, such as trols, Inc. When programming the HomeLink®
garage door openers, entrance gates, Wireless Control System to operate
door locks, home lighting, and security WARNING a garage door opener or an entrance
systems. There are three HomeLink® gate, unplug the device’s motor
buttons on the sun visor, each of which . When programming the from the outlet during programming
you can program for operation of one HomeLink ® Wireless Control to prevent motor burnout.
System, you may be operating a
– CONTINUED –
6-18 Interior equipment
NOTE
. After programming your HomeLink®
Wireless Control System for the de-
sired devices, retain the hand-held
transmitters for further programming
or device testing in the event of a
problem.
. It is recommended that you insert a
new battery in the hand-held transmit-
ter of a device to ensure correct
programming.
– CONTINUED –
6-20 Interior equipment
trol System and your garage door opener memory of all three buttons. opener by pressing the programmed
should activate when the HomeLink® HomeLink® button.
3. Hold the end of the entrance gate’s/
button is pressed.
garage door opener’s hand-held transmit-
ter between 1 and 3 inches (25 and 76 & Programming other devices
& Programming for entrance mm) away from the HomeLink® buttons on To program other devices such as door
gates and garage door open- the driver’s sun visor, keeping the indica- locks, home lighting and security systems,
ers in Canada tor light in view. contact HomeLink at www.homelink.com
1. Unplug the motor of the entrance gate or call 1-800-355-3515.
or garage door opener from the outlet.
& Operating the HomeLink®
Wireless Control System
Once programmed, the HomeLink® Wire-
less Control System can be used to
remote-control the devices to which its
buttons are programmed. To activate a
device, simply press the appropriate but-
ton. The indicator light illuminates, indicat-
ing that the signal is being transmitted.
3. Press and hold the hand-held trans- & In case a problem occurs Rear view camera (if
mitter button. The HomeLink® indicator
light will flash, first slowly and then rapidly.
If you cannot activate a device using the equipped)
corresponding HomeLink® button after
4. When the indicator light begins to flash programming, contact HomeLink at
rapidly, release both buttons. www.homelink.com or call 1-800-355-
The programming for the previous device 3515 for assistance.
is now erased and the new device can be
operated by pushing the HomeLink ®
button.
& Erasing HomeLink® button
memory
NOTE
. Performing this procedure erases
the memory of all the preprogrammed
buttons simultaneously. The memory A rear view camera is attached to the rear
of individual buttons cannot be erased. gate. When the ignition switch is “ON” and
. It is recommended that upon the the select lever is set to “R”, the rear view
sale of the vehicle, the memory of all camera automatically displays the rear
programmed HomeLink® buttons be view image behind the vehicle on the
erased for security purposes. navigation monitor or on the inside mirror.
1. Press and hold the two outside buttons
until the indicator light begins to flash WARNING
(after 20 seconds). . Since the rear view camera uses
2. Release both buttons. a wide-angle lens, the image on
the monitor is different from the
actual view in terms of distance.
. Since the range of the image on
the monitor is limited, you should
always check the rear view and
– CONTINUED –
6-22 Interior equipment
the surrounding area with your be very careful removing it. moisten a clean cloth with a diluted
eyes and mirrors, and move Otherwise, damage done to the neutral detergent to remove the wax.
backward at a slow speed. Mov- camera may cause a fire or . The camera lens has hard coating to
ing backward only by checking electric shock. Pour water or help prevent scratches. However, when
the rear view image from the lukewarm water over the camera washing the vehicle or cleaning the
camera could cause an accident. to remove mud and ice, and wipe camera lens, be careful not to scratch
. Do not disassemble or modify the it with a soft, dry cloth. the camera lens. Do not use a washing
camera, switch or wiring. If . Do not put a flame close to the brush directly on the camera lens. The
smoke comes out or you smell camera or wiring. Otherwise, da- monitor screen may be adversely af-
a strange odor, stop using the mage or fire may occur. fected.
rear view camera immediately. . Strong light shined on the camera
. When replacing the fuse, be sure lens may develop white light stripes
Contact your SUBARU dealer to use a fuse with the specified
for an inspection. Continued use around the light source. This is not a
rating. Use of a fuse with a malfunction.
may result in accident, fire or different rating may result in a
electric shock. . Under the fluorescent light, the dis-
malfunction. play may flicker. However, this is not a
. If the rear view camera is used for malfunction.
CAUTION a long time while the engine is . The image of the rear view camera
not operated, the battery may may be slightly different from the
. If your vehicle is washed with a become completely discharged. actual color of the objects.
high-pressure washer, do not
allow water to contact the camera & How to use the rear view
directly. Entry of water in the NOTE
. Do not wipe the camera with alcohol,
camera
camera lens may result in con-
densation, malfunction, fire or benzine or paint thinner. Otherwise, When the select lever is set to “R”, the rear
electric shock. discoloration may occur. To remove view camera automatically displays the
contamination, wipe the camera with a rear view image from the vehicle. When
. Since the camera is a precision the lever is set to other positions, the
cloth moistened with a diluted neutral
device, do not subject it to strong image before setting to “R” is displayed.
detergent and then wipe it with a soft,
impacts. Otherwise, malfunction,
dry cloth. 1. Set the ignition switch to “ON”.
fire or electric shock may occur.
. When waxing the vehicle, be careful 2. Set the select lever to “R”.
. If mud or snow sticks to or is not to apply the wax to the camera. If it
frozen on the camera, you must comes in contact with the camera,
Interior equipment 6-23
NOTE & Viewing range on the screen
. The image of the rear view camera
has priority over other screen displays.
. The image of the rear view camera is
horizontally reversed as is the case
with the vehicle rearview mirror or the
side view mirror.
. It may be difficult to see the image of
the rearview camera in the following
cases. This is not a malfunction of the
camera.
– The vehicle is in a dark place (at
night, in a tunnel, etc.).
– The vehicle is in an extremely hot Image from camera
or cold place. Range of view The area from the rear end of the bumper
– An object (such as raindrops, can be viewed. Areas at both ends of the
snow, dirt, etc.) that disturbs the bumper and areas just under the bumper
view of the rear view camera sticks cannot be viewed.
to the lens of the camera. Also, the image from the rear view camera
– Strong light shined directly on looks shorter than the actual distance.
the camera lens (occasionally, there
are vertical lines on the screen). CAUTION
The range that can be viewed with
the rear view camera is limited.
Always be sure to check with your
eyes when moving backward and
proceed slowly.
Range of view
– CONTINUED –
6-24 Interior equipment
CAUTION
The range that can be viewed with
the rear view camera is limited.
Always be sure to check with your
eyes when moving backward and
proceed slowly.
CAUTION
Image from camera
The area above the camera cannot be Help lines displayed on the navigation . When moving backward, always
monitor check the back with your eyes
viewed. If there is an object that has a
wide projection on its upper part such as a without relying on the help lines.
sign pole behind the vehicle, the projec- . The actual position may be dif-
Interior equipment 6-25
ferent from the indication of the ! When there is an upward slope at the ! When there is a downward slope at
help lines. back the back
. Differences may occur due to
number of passengers or loaded
cargo.
. When the vehicle is on a slope or
when the vehicle is inclined
against the road, the indication
is different from the actual posi-
tion.
– CONTINUED –
6-26 Interior equipment
1) 3 feet (1 m) line
2) 6.5 feet (2 m) line
3) 10 feet (3 m) line
The distance marker shows the distance
on the road. If there is a car or other object
close behind, distance cannot be correctly
displayed.
Starting and operating
need to add any fuel system cleaning Methanol can be used in your vehicle
agents to your fuel tank. ONLY if it does not exceed 5% of the fuel
mixture AND if it is accompanied by
Many gasolines are now blended with sufficient quantities of the proper cosol-
materials called oxygenates. Use of these vents and corrosion inhibitors required to
fuels can also help keep the air cleaner. prevent damage to the fuel system. Do not
Oxygenated blend fuels, such as MTBE use fuel containing methanol EXCEPT
(Methyl Tertiary Butyl ether) or ethanol under these conditions.
(ethyl or grain alcohol) may be used in
your vehicle, but should contain no more . If undesirable driveability problems are
than 15% MTBE or 10% ethanol for the experienced and you suspect they may be
proper operation of your SUBARU. fuel related, try a different brand of gaso-
line before seeking service at your
In addition, some gasoline suppliers are SUBARU dealer.
now producing reformulated gasolines,
which are designed to reduce vehicle . Fuel system damage or driveability 1. To open the fuel filler lid, pull the lid
emissions. SUBARU approves the use of problems which result from the use of release lever up. The lever is on the floor
reformulated gasoline. improper fuel are not covered under the at the left of the driver’s seat.
SUBARU Limited Warranty.
If you are not sure what the fuel contains,
you should ask your service station & Fuel filler lid and cap
operators if their gasolines contain deter-
gents and oxygenates and if they have ! Refueling
been reformulated to reduce vehicle emis- Only one person should be involved in
sions. refueling. Do not allow others to approach
the area of the vehicle near the fuel filler
As additional guidance, only use fuels pipe while refueling is in progress.
suited for your vehicle as explained in the
following. Be sure to observe any other precautions
that are posted at the service station.
. Fuel should be unleaded and have an
octane rating no lower than that specified
in this manual.
2. Open the fuel filler lid.
. Methanol (methyl or wood alcohol) is
sometimes mixed with unleaded gasoline.
– CONTINUED –
7-4 Starting and operating
WARNING 3. Remove the fuel filler cap by turning it tion, causing fuel to overflow the
slowly counterclockwise. tank and creating a fire hazard.
Before opening the fuel filler cap, . Stop refueling when the auto-
first touch the vehicle body or a WARNING matic stop mechanism on the
metal portion of the fuel pump or fuel nozzle activates. If you con-
. Gasoline vapor is highly flam-
similar object to discharge any tinue to add fuel, temperature
mable. Before refueling, always
static electricity that may be present changes or other conditions
first stop the engine and close all
on your body. If your body is carry- may cause fuel to overflow from
vehicle doors and windows.
ing an electrostatic charge, there is the tank and create a fire hazard.
Make sure that there are no
a possibility that an electric spark
lighted cigarettes, open flames
could ignite the fuel, which could 4. Stop filling the tank after the fuel filler
or electrical sparks in the adja-
burn you. To avoid acquiring a new pump automatically turns off. Do not add
cent area. Refueling must be
static electric charge, do not get any more fuel.
performed outside. Quickly wipe
back into the vehicle while refueling
up any spilled fuel.
is in progress. CAUTION
. When opening the cap, grasp it
firmly and turn it slowly to the Make sure that the cap is tightened
left. Do not remove the cap until it clicks to prevent fuel spillage
quickly. Fuel may be under pres- in the event of an accident.
sure and spray out of the fuel
filler neck, especially in hot 5. Put the cap back on, turn it clockwise
weather. If you hear a hissing until you hear a clicking noise. Be certain
sound while you are removing not to catch the tether under the cap while
the cap, wait for the sound to tightening.
stop and then slowly open the
6. Close the fuel filler lid completely.
cap to prevent fuel from spraying
out and creating a fire hazard. If you spill any fuel on the painted surface,
rinse it off immediately. Otherwise, the
. When refueling, insert the fuel painted surface could be damaged.
nozzle securely into the fuel filler
1) Open pipe. If the nozzle is lifted or not
2) Close fully inserted, its automatic stop-
ping mechanism may not func-
Starting and operating 7-5
NOTE mage to the fuel system. State emission testing (U.S.
. After refueling, turn the cap to the only)
right until it clicks to ensure that
it is fully tightened. If the cap is
not securely tightened, fuel may WARNING
leak out while the vehicle is being
driven or fuel spillage could Testing of an All-Wheel Drive model
occur in the event of an accident, must NEVER be performed on a
creating a fire hazard. single two-wheel dynamometer. At-
tempting to do so will result in
. Do not let fuel spill on the exterior uncontrolled vehicle movement and
surfaces of the vehicle. Because may cause an accident or injuries to
fuel may damage the paint, be persons nearby.
sure to wipe off any spilled fuel
quickly. Paint damage caused by
spilled fuel is not covered under CAUTION
. You will see the “ ” sign in the fuel the SUBARU Limited Warranty.
gauge. This indicates that the fuel filler . Always use a genuine SUBARU Resultant vehicle damage due to
door (lid) is located on the right side of fuel filler cap. If you use the improper testing is not covered
the vehicle. wrong cap, it may not fit, and under the SUBARU Limited War-
. If the fuel filler cap is not tightened your fuel tank and emission con- ranty and is the responsibility of
until it clicks or if the tether is caught trol system may be damaged. It the state inspection program or its
under the cap, the CHECK ENGINE could also lead to fuel spillage contractors or licensees.
warning light/malfunction indicator and a fire.
lamp may illuminate. Refer to “CHECK At state inspection time, remember to
. Immediately put fuel in the tank
ENGINE warning light/Malfunction in- tell your inspection or service station in
whenever the low fuel warning
dicator lamp” F3-12. advance not to place your SUBARU
light illuminates. Engine misfires
AWD vehicle on a two-wheel dynam-
as a result of an empty tank
CAUTION ometer. Otherwise, serious transmis-
could cause damage to the en-
sion damage will result.
gine.
. Never add any cleaning agents to
Some states have started using dynam-
the fuel tank. The addition of a
ometers in their state inspection programs
cleaning agent may cause da-
– CONTINUED –
7-6 Starting and operating
in order to meet their obligation under not damage a SUBARU AWD vehicle. “CHECK ENGINE” warning light/MIL is
federal law to implement stricter vehicle Under no circumstances should the rear not properly operating or there is one or
emission standards to reduce air pollution wheels be jacked off the ground, nor more diagnostic trouble codes stored in
from vehicles. A dynamometer is a tread- should the driveshaft be disconnected for vehicle’s computer with the “CHECK
mill or roller-like testing device that allows state emission testing. ENGINE” warning light/MIL illuminated.
your vehicle’s wheels to turn while the . A state emission inspection may reject
vehicle remains in one place. Depending The EPA has issued regulations for (not pass or fail) a vehicle if the number of
on the severity of a state’s air pollution inspecting the On-Board Diagnostic OBD system readiness monitors “Not
problems, the states must adopt either a (OBD) system as part of the state emis- Ready” is greater than one. Under this
“basic” or “enhanced” vehicle emission sions inspection. The OBD system is condition, the vehicle operator should be
inspection test. Normally, a portion of the designed to detect engine and transmis- instructed to drive his/her vehicle for a few
basic emission test consists of an emis- sion problems that might cause vehicle days to set the monitors and return for an
sion inspector inserting an analyzer probe emissions to exceed allowable limits. emission re-inspection.
into the exhaust pipe of an idling vehicle These inspections apply to all 1996 model
year and newer passenger cars and light . Owners of rejected or failing vehicles
for a short period of time. States with more should contact their SUBARU Dealer for
severe air pollution problems are required trucks. Over 30 states plus the District of
Columbia have implemented the OBD service.
to adopt an enhanced vehicle emission
test. This test simulates actual driving system inspection.
conditions on a dynamometer and permits . The inspection of the OBD system
more accurate measurement of tailpipe consists of a visual operational check of
emitted pollution than the basic emission the “CHECK ENGINE” warning light/
test. malfunction indicator lamp (MIL) and an
The U.S. Environmental Protection examination of the OBD system with an
Agency (EPA) and states using two-wheel electronic scan tool while the engine is
dynamometers in their emission testing running.
programs have EXEMPTED SUBARU . A vehicle passes the OBD system
AWD vehicles from the portion of the inspection if proper the “CHECK EN-
testing program that involves a two-wheel GINE” warning light/MIL illumination is
dynamometer. observed, there is no stored diagnostic
There are some states that use four-wheel trouble codes, and the OBD system
dynamometers in their testing programs. readiness monitors are complete.
When properly used, that equipment will . A vehicle fails the OBD inspection if the
Starting and operating 7-7
Preparing to drive Starting the engine tor pedal. Release the key immediately
after the engine has started.
You should perform the following checks If the engine does not start, try the
and adjustments every day before you CAUTION following.
start driving. (1) Turn the ignition switch to the
. Do not operate the starter motor “LOCK” position and wait for at least
1. Check that all windows, mirrors, and
continuously for more than 10 10 seconds. After checking that the
lights are clean and unobstructed.
seconds. If the engine fails to parking brake is firmly set, turn the
2. Check the appearance and condition start after operating the starter
of the tires. Also check tires for proper ignition switch to the “START” position
for 5 to 10 seconds, wait for 10 while depressing the accelerator pedal
inflation. seconds or more before trying
3. Look under the vehicle for any sign of slightly (approximately a quarter of the
again. full stroke). Release the accelerator
leaks.
. If you restart the engine while the pedal as soon as the engine starts.
4. Check that the hood and rear gate are vehicle is moving, shift the select
fully closed. (2) If this fails to start the engine, turn
lever into the “N” position. Do the ignition switch back to the “LOCK”
5. Check the adjustment of the seat. not attempt to place the select position and wait for at least 10
6. Check the adjustment of the inside lever of a moving vehicle into the seconds. Then fully depress the accel-
and outside mirrors. “P” position. erator pedal and turn the ignition
7. Fasten your seatbelt. Check that your switch to the “START” position. If the
passengers have fastened their seatbelts. 1. Apply the parking brake. engine starts, quickly release the
8. Check the operation of the warning 2. Turn off unnecessary lights and ac- accelerator pedal.
and indicator lights when the ignition cessories. (3) If this fails to start the engine, turn
switch is turned to the “ON” position. 3. Shift the select lever to the “P” or “N” the ignition switch again to the “LOCK”
9. Check the gauges, indicator and warn- position (preferably “P” position). The position. After waiting for 10 seconds
ing lights after starting the engine. starter will only operate when the select or longer, turn the ignition switch to the
lever is at the “P” or “N” position. “START” position without depressing
NOTE 4. Turn the ignition switch to the “ON” the accelerator pedal.
position and check the operation of the (4) If the engine still refuses to start,
Engine oil, engine coolant, brake fluid, contact your nearest SUBARU dealer
washer fluid and other fluid levels warning and indicator lights. Refer to
“Warning and indicator lights” F3-9. for assistance.
should be checked daily, weekly or at
fuel stops. 5. Turn the ignition switch to the “START” 6. Confirm that all warning and indicator
position without depressing the accelera- lights have turned off after the engine has
– CONTINUED –
7-8 Starting and operating
started. The fuel injection system auto- Stopping the engine Remote engine start system
matically lowers the idle speed as the
engine warms up.
(dealer option)
WARNING
While the engine is warming up, make
sure that the select lever is at the “P” or WARNING
Do not stop the engine when the
“N” position and that the parking brake is vehicle is moving. This will cause . Do not start the engine using the
applied. loss of power to the power steering remote start system in an en-
and the brake booster, making steer- closed environment (e.g. closed
NOTE ing and braking more difficult. It garage). Prolonged operation of
. The engine may be difficult to start could also result in accidental acti- a motor vehicle in an enclosed
when the battery has been discon- vation of the “LOCK” position on the environment can cause a harmful
nected and reconnected (for mainte- ignition switch, causing the steering build-up of Carbon Monoxide.
nance or other purposes). This diffi- wheel to lock. Carbon Monoxide is harmful to
culty is caused by the electronically
your health. Exposure to high
controlled throttle’s self-diagnosis The ignition switch should be turned off levels of Carbon Monoxide can
function. To overcome it, keep the only when the vehicle is stopped and the cause headaches, dizziness or in
ignition switch in the “ON” position engine is idling. extreme cases unconsciousness
for approximately 10 seconds before
and/or death.
starting the engine.
. To protect the engine while the . Before performing any servicing
select lever is in the “P” or “N” of the vehicle, temporarily place
position, the engine is controlled so the remote engine start system in
that the engine speed may not become service mode to prevent the
too high even if the accelerator pedal is system from unexpectedly start-
depressed hard. ing the engine.
Starting and operating 7-9
an additional four times. If the vehicle fails & Entering the vehicle while it
to start after the additional attempts, the is running via remote start
remote engine start system will abort and
return to a non activated state. 1. Unlock the vehicle doors using the
remote keyless entry system. If the vehi-
& Remote start safety features cle’s doors are unlocked manually using
For safety and security reasons, the the key, the vehicle’s alarm system will
system will fail to start and beep the horn trigger and the remote engine start system
twice or shut down the engine during will turn off. Inserting the key into the
remote start operation if any of the ignition switch and turning it to the “ON”
following occur: position or pressing the unlock button “ ”
. The brake pedal is depressed before on the remote keyless entry transmitter
the vehicle ignition switch is turned “on” will disarm the alarm system. Refer to
“Alarm system” F2-16.
. The key was already in the ignition
& Starting your vehicle switch 2. Enter the vehicle. Do not depress the
brake pedal.
The remote engine start system is acti- . The engine hood is opened
vated by pressing the “ ” button twice 3. Insert the key into the ignition switch
. The vehicle’s engine idle speed has and turn to the “ON” position. If the ignition
within 3 seconds on your remote engine reached a level over 3,000 RPM
start transmitter. The system will check switch is accidentally turned to the
. The alarm is triggered by opening any “START” position, the system’s “starter
certain pre-conditions before starting, and of the doors or the rear gate.
if all safety parameters are correct, the anti-grind” feature will prevent the starter
engine will start within 5 seconds. While NOTE from re-cranking.
the vehicle is operating via remote engine 4. Depress the brake pedal. The remote
. The security indicator light on the
start, the vehicle’s power window features starter disengages, the vehicle’s power
dashboard will stop flashing while
will be disabled. Also, the system has a window features are re-enabled and the
under remote engine start operation,
timer and will shut down after 15 minutes if vehicle will operate normally.
but the vehicle is still protected.
you do not operate the vehicle. Press and . If the vehicle is entered during
hold the “ ” button for 2 seconds again to remote engine start operation, the & Entering the vehicle follow-
turn the vehicle off. If the vehicle’s starter system will not record entry in the ing remote engine start shut-
cranks but does not start or starts and alarm history. down
stalls, the remote engine start system will An alarm trigger may occur if the vehicle is
power off then attempt to start the vehicle opened by the remote keyless entry
– CONTINUED –
7-10 Starting and operating
transmitter within a few seconds immedi- ! To disengage the service mode be adjusted using the following procedure.
ately following remote engine start shut- Turn the ignition switch to the “ON” 1. Open the driver’s door (the driver’s
down. position, depress and hold the brake door must remain opened throughout the
pedal, then press and release the “ ” entire process).
& Pre-heating or pre-cooling button on the remote engine start trans- 2. Insert the key into the vehicle’s ignition
the interior of the vehicle mitter three times. The system will pause switch and turn to the “ON” position.
for 1 second and flash the parking lights
Before exiting the vehicle, set the tem- one time indicating that the system has 3. Locate the small black programming
perature controls to the desired setting exited service mode. button behind the fuse box cover, on the
and operation. After the system starts the driver’s side left under the dashboard
vehicle, the heater or air-conditioning will NOTE panel.
activate and heat or cool the interior to When taking your vehicle in for service, 4. Press and hold the black programming
your setting. it is recommended that you inform the button for 10 to 15 seconds. The horn will
service personnel that your vehicle is honk and the parking lights will flash three
& Service mode equipped with a remote engine start times to indicate that the system has
In service mode, the remote start function system. entered programming mode. At this point
is temporarily disabled to prevent the you can perform either action (step 5 or
system from unexpectedly starting the step 6).
& Remote engine start trans- 5. To program a remote transmitter:
engine while being serviced. mitter programming and pro- press and release the “ ” button on each
! To engage the service mode grammable feature option transmitter. The horn will honk and the
Turn the ignition switch to the “ON” New transmitters can be programmed to parking lights will flash one time to indicate
position, depress and hold the brake pedal the remote engine start system in the a successful transmitter learn each time
then, press and release the “ ” button on event that remote engine start transmitters the “ ” button is pressed. You can
the remote engine start transmitter three are lost, stolen or damaged. The remote program up to eight transmitters.
times. The system will pause for 1 second engine start system also has one pro- 6. To toggle the Horn Confirmation chirps
and then flash the parking lights and honk grammable feature that can be adjusted ON/OFF: press and release the brake to
the horn three times indicating that the for user preference. toggle the feature. The horn will chirp and
system is in service mode. When attempt- The remote engine start system can be the parking lights will flash one time to
ing to activate the remote start system programmed to either make an audible indicate Confirmation Horn Chirps are
while in service mode, the parking lights horn chirp upon remote start activation or “OFF”. The horn will honk and the parking
will flash and the horn will honk two times not. Remote engine start transmitter pro- lights will flash 2 times to indicate Con-
and will not start. gramming and feature programming can firmation Horn Chirps are “ON”. Depres-
Starting and operating 7-11
sing the brake pedal repeatedly will toggle . Batteries should not be exposed
the feature ON or OFF each time. to excessive heat such as sun-
7. To exit the remote transmitter and shine, fire or the like.
feature programming mode, turn the igni-
tion switch to the “LOCK” position, remove The two 3-volt lithium batteries (model
the key from the ignition switch and test CR-1220) supplied in your remote engine
operation of the remote transmitter(s) and start transmitter should last approximately
horn confirmation feature. three years, depending on usage. When
the batteries begin to weaken, you will
& System maintenance notice a decrease in range (distance from
the vehicle that your remote engine start
! Changing the batteries system operates). Follow the instructions
below to change the remote control
CAUTION batteries. 1. Carefully pry the remote engine start
transmitter halves apart using a small flat-
. Do not let dust, oil or water get on head screwdriver.
or in the remote engine start
transmitter when replacing the
battery.
. Be careful not to damage the
printed circuit board in the re-
mote engine start transmitter
when replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
. There is a danger of explosion if
an incorrect replacement battery
is used. Replace only with the
same or equivalent type of bat-
tery.
– CONTINUED –
7-12 Starting and operating
“R” position or vice versa until allow the transmission to shift at the
the vehicle has completely most appropriate times for the current
stopped. Such shifting may condition of your vehicle. Optimized
cause damage to the transmis- shifting will be restored as the vehicle
sion. continues to be driven for a while.
. When parking the vehicle, first
securely apply the parking brake & Select lever
and then place the select lever in
the “P” position. Avoid parking
for a long time with the select
lever in any other position as
doing so could result in a dead
battery.
1) Select lever button
NOTE ! P (Park)
. When the engine coolant tempera- This position is for parking the vehicle and
ture is still low, the automatic transmis- starting the engine.
sion will upshift to higher engine In this position, the transmission is me-
speeds than when the coolant tempera- chanically locked to prevent the vehicle
ture is sufficiently high in order to : With the brake pedal depressed, shift from rolling freely.
shorten the warm-up time and improve while pressing the button in.
driveability. The gearshift timing will : Shift while pressing the button in. When you park the vehicle, first set the
automatically shift to the normal timing : Shift without pressing the button. parking brake fully, then shift into the “P”
after the engine has warmed up. position. Do not hold the vehicle with only
The select lever has four positions, “P”,
. Immediately after ATF (automatic the transmission.
“R”, “N”, “D” and also has manual gate for
transmission fluid) is replaced, you
using “SPORT” mode or manual mode. To shift the select lever from the “P” to any
may feel that the automatic transmis-
sion operation is somewhat unusual. other position, you have to depress the
This results from invalidation of data brake pedal fully then push the select
which the on-board computer has lever button on the lever knob when the
collected and stored in memory to ignition switch is in the “ON” position. This
prevents the vehicle from lurching when it
– CONTINUED –
7-14 Starting and operating
is started. position to the “R” position is possible return to the original gear position.
for a limited time period by depressing To use the SPORT mode, move the lever
If the select lever does not move from the the brake pedal and then becomes
“P” position with the brake pedal de- from this position into the manual gate.
impossible. If the select lever becomes To use the manual mode, move the lever
pressed, the select lever button pushed impossible to be moved after a limited
in, and the ignition switch in the ON from this position into the manual gate
time period, turn the ignition switch to then move it toward the “+” and “−” ends.
position, refer to “Shift lock function” F7- the “ON” position. You will then be able
14. to move the select lever to the “P” ! While climbing a grade
! R (Reverse) position. When driving up a hill, undesired upshift to
This position is for backing the vehicle. 4th or 5th gear is prevented from taking
WARNING place when the accelerator is released.
To shift from the “N” to “R” position, stop This minimizes the chance of subsequent
the vehicle completely then move the Do not drive the vehicle with the downshifting to a lower gear when accel-
lever to the “R” position while pushing select lever in the “N” (Neutral) erating again. This prevents repeated
the select lever button. position. Engine braking has no upshifting and downshifting resulting in a
! N (Neutral) effect in this condition and the risk smoother operation of the vehicle.
This position is for restarting a stalled of an accident is consequently in-
engine. creased. NOTE
The transmission may downshift to 2nd
In this position the wheels and transmis-
! D (Drive) or 1st gear, depending on the way the
sion are not locked. In this position, the
accelerator pedal is depressed to ac-
transmission is neutral; the vehicle will roll This position is for normal driving. celerate the vehicle again.
freely, even on the slightest incline unless The transmission automatically shifts into
the parking brake or foot brake is applied. a suitable gear from 1st to 5th according to
Avoid coasting with the transmission the vehicle speed and the acceleration & Shift lock function
neutral. you require. The shift lock function helps prevent the
During coasting, there is no engine brak- improper operation of the select lever.
When more acceleration is required in this
ing effect. . The select lever cannot be operated
position, depress the accelerator pedal
fully to the floor and hold that position. The unless the ignition switch is turned to the
NOTE “ON” position and the brake pedal is
When the ignition switch has been transmission will automatically downshift
to 4th, 3rd, 2nd or 1st gear. When you depressed.
turned to the “LOCK” position, move- . The select lever cannot be moved from
ment of the select lever from the “N” release the pedal, the transmission will
Starting and operating 7-15
the “P” position to any other position . When the select lever cannot be
before the brake pedal is depressed. shifted from “N” to “R” or “P”:
Depress the brake pedal first, and then Within 60 seconds after placing the igni-
operate the select lever. tion switch in the “Acc” position, move the
. Only the “P” position allows you to turn select lever to the “R” or “P” position with
the key from the “Acc” position to the the select lever button pressed and brake
“LOCK” position and remove the key from pedal depressed.
the ignition key cylinder.
. If the ignition switch is turned to the If you must perform the above procedure,
“LOCK” position while the select lever is in the shift lock system (or the vehicle control
the “N” position, the select lever may not system) may be malfunctioning. Contact a
be moved to the “P” position after a period SUBARU dealer for an inspection as soon
of time. Therefore, move the select lever as possible.
to the “P” position with the brake pedal If the select lever does not move after 2. Remove the cover by prying on the
depressed soon after the ignition switch is performing the above procedure, refer to edge with a flat-head screwdriver.
turned to the “LOCK” position. “Shift lock release using the shift lock
release button” F7-15. NOTE
! Shift lock release To prevent damage to the cover, wrap
! Shift lock release using the shift the tip of the flat-head screwdriver with
If the select lever cannot be operated, turn lock release button
the ignition switch back to the “ON” vinyl tape or a cloth before removing
Perform the following procedure to release the cover.
position then move the select lever to the
the shift lock.
“P” position with the select lever button
pressed and brake pedal depressed. 1. Apply the parking brake and stop the
engine.
If the select lever does not move after
performing the above procedure, perform
the following steps.
. When the select lever cannot be
shifted from “P” to “N”:
Refer to “Shift lock release using the shift
lock release button” F7-15.
– CONTINUED –
7-16 Starting and operating
Gearshifts can be performed using the . The transmission does not automa- off.
select lever. tically shift up in the manual mode.
Perform gearshifts in accordance with & Driving tips
road conditions so that the tachometer
needle does not enter the red zone. If . On a road surface where there is a risk
the engine speed reaches a predeter- of wheelspin (for example, a snow- or
mined level, a fuel-cut function will gravel-covered road), you can pull away
operate. Shift up if this happens. Also, from a standstill safely and easily by first
the transmission may automatically selecting the 2nd gear of the manual
shift up to protect the engine. mode.
. If you attempt to shift down when . Always apply the foot or parking brake
the engine speed is too high, i.e., when when the vehicle is stopped in the “D” or
a downshift would push the tachometer “R” position.
needle beyond the red zone, beeps will . Always set the parking brake when
be emitted to warn you that the down- parking your vehicle. Do not hold the
Shift to the next-higher gear by briefly shift is not possible. vehicle with only the transmission.
pushing the select lever toward the “+” . If you attempt to shift up when the . Do not keep the vehicle in a stationary
end of the manual gate. vehicle speed is too low, the transmis- position on an uphill grade by using the
Shift to the next-lower gear by briefly sion will not respond. “D” position. Use the brake instead.
pulling the select lever toward the “−” . You can perform a skip-shift (for . The engine may, on rare occasions,
end of the manual gate. example, from 4th to 2nd) by operating knock when the vehicle rapidly acceler-
the select lever twice in rapid succes- ates or rapidly pulls away from a standstill.
NOTE sion. This phenomenon does not indicate a
Please read the following points care- . The transmission automatically se- problem.
fully and bear them in mind when using lects 1st gear when the vehicle stops
. A slight reduction in output torque may
the manual mode. moving.
occur before the engine warms up.
. If the temperature of the automatic
. When the temperature of the engine
transmission fluid becomes too high,
oil is higher than normal, warning
the “AT OIL TEMP” warning light will
beeps are emitted and the shift position
illuminate and upshifts to 5th gear will
indicator shows “−”. If these warnings
not be possible. Immediately stop the
are issued, deselect the manual mode
vehicle in a safe place and let the
to protect the engine from damage.
engine idle until the warning light turns
– CONTINUED –
7-18 Starting and operating
& SPORT mode When selected, the SPORT mode indica- Power steering
tor light on the combination meter will
illuminate.
To deselect SPORT mode, move the CAUTION
select lever to the “D” position or select
manual mode. To subsequently reselect Do not hold the steering wheel at the
SPORT mode, move the select lever to fully locked position left or right for
the “D” position and from there to the more than 5 seconds. This may
manual gate. damage the power steering pump.
In this mode, the transmission shifts up at
higher vehicle speeds and shifts down The power steering system operates only
more responsively than in normal mode. when the engine is running.
If you lose power steering assist because
the engine stops or the system fails to
function, you can steer but it will take
SPORT mode is used when power is much more effort.
needed for rapid acceleration or for uphill
driving. To select this mode, move the NOTE
select lever from the “D” position to the Right after the engine has been started
manual gate. and before it has warmed up, you may
hear a noise coming from areas adja-
cent to the power steering pump which
is located at the right-front area of the
engine compartment. This noise is
normal. It does not indicate power
steering system trouble.
Starting and operating 7-19
Braking a loss of control of the vehicle. Keep harder than normal and the braking dis-
driving straight ahead while gradually tance will increase.
& Braking tips reducing speed. Then slowly pull off the
road to a safe place. NOTE
WARNING Some sound accompanying operation
& Brake system of the vacuum pump may be heard
Never rest your foot on the brake from the engine compartment during
pedal while driving. This can cause ! Two separate circuits driving. This does not indicate a mal-
dangerous overheating of the Your vehicle has a dual circuit brake function.
brakes and needless wear on the system. Each circuit works diagonally
across the vehicle. If one circuit of the ! Brake assist system
brake pads and linings.
brake system should fail, the other half of
the system still works. If one circuit fails, WARNING
! When the brakes get wet
the brake pedal will go down much closer
When driving in rain or after washing the Do not be overconfident about the
to the floor than usual and you will need to
vehicle, the brakes may get wet. As a brake assist. It is not a system that
depress it down much harder. And a much
result, brake stopping distance will be brings more braking ability to the
longer distance will be needed to stop the
longer. To dry the brakes, drive the vehicle vehicle beyond its braking capabil-
vehicle.
at a safe speed while lightly depressing ity. Always use the utmost care
the brake pedal to heat up the brakes. ! Brake booster when driving regarding vehicle
The brake booster uses engine manifold speed and safe distance.
! Use of engine braking
vacuum to assist braking force. If engine
Remember to make use of engine braking manifold vacuum becomes insufficient,
in addition to foot braking. When descend- such as when driving in a high-altitude CAUTION
ing a grade, if only the foot brake is used, place, a vacuum pump assures a suffi-
the brakes may start working improperly cient vacuum to operate the brake boos- When you need to brake suddenly,
because of brake fluid overheating, ter. Do not turn off the engine while driving continue depressing the brake pedal
caused by overheated brake pads. To because that will turn off the brake strongly to bring the effect of the
help prevent this, shift into a lower gear to booster, resulting in poor braking power. brake assist.
get stronger engine braking. The brakes will continue to work even
! Braking when a tire is punctured when the brake booster completely stops NOTE
Do not depress the brake pedal suddenly functioning. If this happens, however, you When you depress the brake pedal
when a tire is punctured. This could cause will have to depress the pedal much
– CONTINUED –
7-20 Starting and operating
suddenly, the brake pedal might wig- mediately have your vehicle inspected by ABS (Anti-lock Brake Sys-
gle. This is a normal operation phe- the nearest SUBARU dealer.
nomenon, and it is not a malfunction.
tem)
Brake assist is a driver assistance system.
It assists the brake power when the driver WARNING
cannot depress the brake pedal strongly
and the brake power is insufficient. Always use the utmost care in
Brake assist generates the brake power driving – overconfidence because
according to the speed at which the driver you are driving with an ABS
depresses the brake pedal. equipped vehicle could easily lead
to a serious accident.
& Disc brake pad wear warning
indicators CAUTION
. The ABS system does not always
decrease stopping distance. You
should always maintain a safe
following distance from other
vehicles.
. When driving on badly surfaced
roads, gravel roads, icy roads, or
over deep newly fallen snow,
stopping distances may be long-
er for a vehicle with the ABS
system than one without. When
driving under these conditions,
The disc brake pad wear warning indica- therefore, reduce your speed and
tors on the disc brakes give a warning leave ample distance from other
noise when the brake pads are worn. vehicles.
If a squeaking or scraping noise is heard . When you feel the ABS system
from the disc brakes while braking, im- operating, you should maintain
Starting and operating 7-21
constant brake pedal pressure. & ABS warning light is turned to the “ON” position.
Do not pump the brake pedal . The warning light illuminates
since doing so may defeat the when the ignition switch is
operation of the ABS system. turned to the “ON” position, but
it does not turn off even when the
The ABS system prevents the lock-up of vehicle speed exceeds approxi-
wheels which may occur during sudden mately 8 mph (12 km/h).
braking or braking on slippery road sur-
faces. This helps prevent the loss of . The warning light illuminates dur-
steering control and directional stability ing driving.
caused by wheel lock-up. If these occur, have the ABS system
repaired at the first available oppor-
When the ABS system is operating, you tunity by your SUBARU dealer.
may hear a chattering noise or feel a slight
vibration in the brake pedal. This is normal
when the ABS operates. The ABS warning light illuminates when NOTE
the ignition switch is turned to the “ON” If the warning light behavior is as
The ABS system will not operate when the position and turns off after approximately 2
vehicle speed is below approximately 6 described in the following, the ABS
seconds. system may be considered normal.
mph (10 km/h). This is an indication that the ABS system . The warning light illuminates right
is working properly. after the engine is started but turns off
& ABS system self-check
immediately, remaining off.
You may feel a slight shock in the brake CAUTION . The warning light remains illumi-
pedal and hear the operating sound of nated after the engine has been started,
ABS from the engine compartment just If the warning light behaves as
follows, the ABS system may not but it turns off when the vehicle speed
after the vehicle is started. This is caused reaches approximately 8 mph (12
by an automatic functional test of the ABS be working properly.
km/h).
system being carried out and does not When the warning light illuminates, . The warning light illuminates during
indicate any abnormal condition. the ABS function shuts down; how- driving, but it turns off immediately and
ever, the conventional brake system remains off.
continues to operate normally.
When driving with an insufficient battery
. The warning light does not illu- voltage such as when the engine is jump
minate when the ignition switch
– CONTINUED –
7-22 Starting and operating
started, the ABS warning light may illumi- Electronic Brake Force Dis- & Steps to take if EBD system
nate. This is due to the low battery voltage malfunctions
and does not indicate a malfunction.
tribution (EBD) system
When the battery becomes fully charged, The EBD system maximizes the effective-
the light will turn off. ness of the brakes by allowing the rear
brakes to supply a greater proportion of
the braking force. It functions by adjusting
the distribution of braking force to the rear
wheels in accordance with the vehicle’s
loading condition and speed.
The EBD system is an integral part of the
ABS system and uses some of the ABS
system’s components to perform its func-
tion of optimizing the distribution of brak-
ing force. If any of the ABS components
used by the EBD system malfunction, the If a malfunction occurs in the EBD system,
EBD system also stops working. the system stops working and the brake
system warning light and ABS warning
When the EBD system is operating, you
light illuminate simultaneously.
may hear a chattering noise or feel a slight
vibration in the brake pedal. This is normal The EBD system may be malfunctioning if
and does not indicate a malfunction. the brake system warning light and ABS
warning light illuminate simultaneously
during driving.
Even if the EBD system malfunctions, the
conventional braking system will still func-
tion. However, the rear wheels will be
more prone to locking when the brakes
are applied harder than usual and the
vehicle’s motion may therefore become
somewhat harder to control.
If the brake system warning light and ABS
Starting and operating 7-23
warning light illuminate simultaneously, gerous. This indicates your brake Vehicle Dynamics Control
take the following steps. system may not be working system
1. Stop the vehicle in the nearest safe, properly. If the light remains
flat location. illuminated, have the brakes in-
2. Shut down the engine, apply the spected by a SUBARU dealer WARNING
parking brake, and then restart it. immediately.
3. Release the parking brake. If both . If at all in doubt about whether Always use the utmost care in
warning lights turn off, the EBD system the brakes are operating prop- driving – overconfidence because
may be malfunctioning. erly, do not drive the vehicle. you are driving with a Vehicle Dy-
Have your vehicle towed to the namics Control system equipped
Drive carefully to the nearest SUBARU
nearest SUBARU dealer for re- vehicle could easily lead to a ser-
dealer and have the system inspected.
pair. ious accident.
4. If both warning lights illuminate again
and remain illuminated after the engine
has been restarted, shut down the engine CAUTION
again, apply the parking brake, and check
the brake fluid level. Refer to “Brake fluid” . Even if your vehicle is equipped
F11-19. with Vehicle Dynamics Control
5. If the brake fluid level is not below the system, winter tires should be
“MIN” mark, the EBD system may be used when driving on snow-cov-
malfunctioning. Drive carefully to the ered or icy roads; in addition,
nearest SUBARU dealer and have the vehicle speed should be reduced
system inspected. considerably. Simply having a
6. If the brake fluid level is below the Vehicle Dynamics Control sys-
“MIN” mark, DO NOT drive the vehicle. tem does not guarantee that the
Instead, have the vehicle towed to the vehicle will be able to avoid
nearest SUBARU dealer for repair. accidents in any situation.
. Activation of the Vehicle Dy-
namics Control system is an
WARNING indication that the road being
. Driving with the brake system travelled on has a slippery sur-
warning light illuminated is dan- face; since having Vehicle Dy-
namics Control is no guarantee
– CONTINUED –
7-24 Starting and operating
that full vehicle control will be cornering and/or an evasive maneuver, starting the engine, a short operation
maintained at all times and under the Vehicle Dynamics Control system noise may be noticed coming from the
all conditions, its activation adjusts the engine’s output and the engine compartment. This noise is
should be seen as a sign that wheels’ respective braking forces to help generated as a result of a check being
the speed of the vehicle should maintain traction and directional control. performed on the Vehicle Dynamics
be reduced considerably. . Traction Control Function Control system and is normal.
. Whenever suspension compo- The traction control function is designed to . Depending on the timing of activa-
nents, steering components, or prevent spinning of the driving wheels on tion of the brakes, the brake pedal may
an axle are removed from a slippery road surfaces, thereby helping to seem to jolt when you drive off after
vehicle equipped with Vehicle maintain traction and directional control. starting the engine. This is a conse-
Dynamics Control system, have Activation of this function is shown by quence of the Vehicle Dynamics Con-
an inspection of that system steady illumination of the Vehicle Dy- trol operational check and is normal.
performed by an authorized namics Control operation indicator light. . In the circumstances shown in the
SUBARU dealer. . Skid Suppression Function following list, the vehicle may be more
unstable than it feels to the driver. The
. The following precautions should The skid suppression function is designed Vehicle Dynamics Control System may
be observed in order to ensure to help maintain directional stability by therefore operate. Such operation does
that the Vehicle Dynamics Con- suppressing the wheels’ tendency to slide not indicate a system malfunction.
trol system is operating properly. sideways during steering operations. Acti-
– on gravel-covered or rutted
– All four wheels should be vation of this function is shown by flashing
roads
fitted with tires of the same of the Vehicle Dynamics Control operation
indicator light. – on unfinished roads
size, type, and brand. Further- – when the vehicle is towing a
more, the amount of wear NOTE trailer
should be the same for all – when the vehicle is fitted with
four tires. . Slight twitching of the brake pedal
may be felt when the Vehicle Dynamics snow tires or winter tires
– Keep the tire pressure at the Control system operates; a small de- . Activation of the Vehicle Dynamics
proper level as shown on the gree of vehicle or steering wheel shak- Control system will cause operation of
vehicle placard attached to ing may also be noticed in this situa- the steering wheel to feel slightly
the driver’s side door pillar. tion. These are normal characteristics different compared to that for normal
of Vehicle Dynamics Control operation conditions.
In the event of wheelspin and/or skidding and are no cause for alarm. . Even if the vehicle is equipped with
on a slippery road surface and/or during . When driving off immediately after a Vehicle Dynamics Control system, it
Starting and operating 7-25
is important that winter tires be used & Vehicle Dynamics Control when the ignition key is turned to the ON
when driving on snow-covered or icy system monitor position.
roads. (All four wheels should be fitted . The indicator light does not turn off
with tires of the same size and brand). ! Vehicle Dynamics Control opera- approximately 2 seconds after the ignition
. It is always important to reduce tion indicator light key has been turned to the ON position.
speed when approaching a corner, ! Vehicle Dynamics Control warning
even if the vehicle is equipped with light/Traction Control system OFF
Vehicle Dynamics Control. indicator light
. All four wheels should be fitted with
tires of the same size, type, and brand;
furthermore, the amount of wear
should be the same for all four tires. If
these precautions are not observed
and non-matching tires are used, it is
quite possible that the Vehicle Dy-
namics Control system will be unable
to operate correctly as intended.
. Always turn off the engine before
replacing a tire as failure to do so may The indicator light illuminates when the
render the Vehicle Dynamics Control ignition key is turned to the ON position; it
system unable to operate correctly. turns off approximately 2 seconds later.
This indicator light flashes during activa-
tion of the skid suppression function and is This single light has the function of
illuminated steadily during activation of the indicating malfunctions in the Vehicle
traction control function. Dynamics Control system and the function
of indicating that the Traction Control
The following two situations could indicate system is not operating. It illuminates in
a malfunction of the Vehicle Dynamics the event of a malfunction in the system
Control system; if either should occur, and is illuminated whenever the system is
have an authorized SUBARU dealer carry not operating.
out an inspection of that system at the first
available opportunity.
. The indicator light does not illuminate
– CONTINUED –
7-26 Starting and operating
! Vehicle Dynamics Control warning due to a malfunction in that electrical ! Traction Control system OFF indica-
system, the Vehicle Dynamics Control will tor light
The warning light illuminates when the
also become unable to control all four
ignition switch is turned to the “ON” This light illuminates to indicate that the
brakes. Thus Vehicle Dynamics Control
position and turns off several seconds Traction Control system is in non-opera-
system operation halts and the warning
after engine startup. This lighting pattern tion mode. This does not constitute failure
light illuminates. Although both the Vehicle
indicates that the Vehicle Dynamics Con- of the Vehicle Dynamics Control system.
Dynamics Control system and the ABS
trol system is operating normally.
will be inoperable in this situation, it will NOTE
The following situations could indicate a still be possible to stop the vehicle using . The indicator light may remain illu-
malfunction of the Vehicle Dynamics normal braking. The Vehicle Dynamics minated for a while after the engine has
Control system; if any should occur, we Control system and the ABS do not been started, especially in cold weath-
recommend that you have an authorized adversely affect operation of the vehicle er. This occurs because the engine has
SUBARU dealer carry out an inspection of in any way when they are inoperable; not yet warmed up and is completely
the system at the first available opportu- however should such a situation occur, normal. The light will turn off when the
nity. drive with care and have an authorized engine has reached a suitable operat-
. The warning light does not illuminate SUBARU dealer carry out an inspection of ing temperature.
when the ignition key is turned to the ON those systems at the first available oppor- . When an engine problem occurs
position. tunity. and the malfunction indicator lamp
. The warning light illuminates while the NOTE illuminates, the indicator light will also
vehicle is being driven. illuminate.
When the warning light illuminates and
. When a malfunction has occurred in turns off in the following way, it in- The following two situations could indicate
the Vehicle Dynamics Control electrical dicates that the Vehicle Dynamics malfunction of the Vehicle Dynamics
system, only the warning light will illumi- Control system is operating normally. Control system; if either should occur,
nate. In such an event, the ABS will still be have an authorized SUBARU dealer carry
operating normally. . Although illuminating after the en-
gine has been started, the warning light out an inspection of that system at the first
. The warning light will also illuminate available opportunity.
quickly turns off and remains off.
when a problem occurs with the ABS or . The indicator light does not illuminate
. The warning light illuminates when
Vehicle Dynamics Control electronic con- when the ignition key is turned to the ON
the vehicle is being driven; it then turns
trol systems. position.
off and remains off.
Because the Vehicle Dynamics Control . The indicator light fails to turn off after
system controls each brake through the the engine is started, even when several
ABS, whenever the ABS stops operating minutes have passed to allow the engine
Starting and operating 7-27
to heat up sufficiently. the Traction Control system. When the Control system except when absolutely
switch is pressed again to reactivate the necessary.
& Traction Control system OFF Traction Control system OFF indicator
switch light “ ” turns off.
With the Traction Control system deacti-
vated, traction enhancement offered by
Traction Control system is unavailable.
Therefore you should not deactivate the
Traction Control system except under
above-mentioned situations.
NOTE
. When the switch has been pressed
to deactivate the Traction Control sys-
tem, the Traction Control system auto-
matically reactivates itself the next time
the ignition key is turned to the “LOCK”
position and the engine is restarted.
Pressing the switch to deactivate the
. If the switch is held down for 10
Traction Control system can facilitate the
seconds or longer, the indicator light
following operations.
turns off, the Traction Control system
. a standing start on a steeply sloping is activated, and the system ignores
road with a snowy, gravel-covered, or any further pressing of the switch. To
otherwise slippery surface make the switch usable again, turn the
. extrication of the vehicle when its ignition key to the “LOCK” position and
wheels are stuck in mud or deep snow restart the engine.
. When the switch is pressed to
When the switch is pressed during engine
deactivate the Traction Control system,
operation, the Traction Control system
the vehicle’s running performance is
OFF indicator light “ ” on the combination
comparable with that of a vehicle that
meter illuminates. The Traction Control
does not have a Traction Control
system will be deactivated and the vehicle
system. Do not deactivate the Traction
will behave like a model not equipped with
7-28 Starting and operating
Tire pressure monitoring WARNING low pressure threshold, the low tire
system (TPMS) pressure warning light should turn
If the low tire pressure warning light off a few minutes later.
illuminates while driving, never If this light still illuminates while
brake suddenly and keep driving driving after adjusting the tire pres-
straight ahead while gradually redu- sure, a tire may have significant
cing speed. Then slowly pull off the damage and a fast leak that causes
road to a safe place. Otherwise an the tire to lose air rapidly. If you have
accident involving serious vehicle a flat tire, replace it with a spare tire
damage and serious personal injury as soon as possible.
could occur.
When a spare tire is mounted or a
Check the pressure for all four tires wheel rim is replaced without the
and adjust the pressure to the COLD original pressure sensor/transmitter
tire pressure shown on the tire being transferred, the low tire pres-
placard on the door pillar on the sure warning light will illuminate
driver’s side. steadily after blinking for approxi-
The tire pressure monitoring system pro- Even when the vehicle is driven a mately one minute. This indicates
vides the driver with a warning message very short distance, the tires get the TPMS is unable to monitor all
by sending a signal from a sensor that is warm and their pressures increase four road wheels. Contact your
installed in each wheel when tire pressure accordingly. Be sure to let the tires SUBARU dealer as soon as possible
is severely low. cool thoroughly before adjusting for tire and sensor replacement and/
The tire pressure monitoring system will their pressures to the standard or system resetting.
activate only when the vehicle is driven at values shown on the tire placard. Do not inject any tire liquid or
speeds above 20 mph (32 km/h). Also, Refer to “Tires and wheels” F11-23. aerosol tire sealant into the tires,
this system may not react immediately to a The tire pressure monitoring system as this may cause a malfunction of
sudden drop in tire pressure (for example, does not function when the vehicle the tire pressure sensors. If the light
a blow-out caused by running over a is stationary. After adjusting the tire illuminates steadily after blinking for
sharp object). pressures, increase the vehicle approximately one minute, promptly
speed to at least 20 mph (32 km/h) contact a SUBARU dealer to have
to start the TPMS re-checking of the the system inspected.
tire inflation pressures. If the tire
pressures are now above the severe
Starting and operating 7-29
– CONTINUED –
7-30 Starting and operating
Cruise control
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more. Make sure the
main switch is turned “OFF” when the
cruise control is not in use to avoid
unintentionally setting the cruise control.
NOTE
If you move the cruise control lever or
To release the parking brake, hold down When parking on a hill, always turn the press the main switch button while
the brake pedal while depressing the steering wheel. When the vehicle is turning the ignition switch “ON”, the
parking brake pedal and slowly releasing headed up the hill, the front wheels should cruise control function is deactivated
it. be turned away from the curb. and the cruise control indicator light
When the parking brake is set while the flashes. To reactivate the cruise control
engine is running, the brake system function, turn the ignition switch back
warning light illuminates. After starting to the “Acc” or “LOCK” position, and
the vehicle, be sure that the warning light then turn it again to the “ON” position.
has turned off before the vehicle is driven.
Refer to “Brake system warning light” F3- WARNING
16.
Do not use the cruise control under
& Parking tips any of the following conditions.
These may cause loss of vehicle
When parking your vehicle, always set the control.
parking brake firmly and put the select
lever in the “P” (Park) position. Always set . driving up or down a steep grade
the parking brake firmly when parking your . driving on slippery or winding
vehicle. Never rely on the transmission When facing downhill, the front wheels roads
alone to hold the vehicle. should be turned into the curb.
. driving in heavy traffic
Starting and operating 7-31
. towing a trailer combination meter will illuminate. At this time, the cruise control set indicator
2. Depress the accelerator pedal until the light is illuminated on the combination
vehicle reaches the desired speed. meter.
& To set cruise control The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
There are three ways to cancel the cruise
3. Push the control lever downward in the control temporarily:
1. Push the main switch button. “SET/COAST” direction and release it.
Then release the accelerator pedal.
. Depress the brake pedal. & To change the cruising speed ! To increase the speed (by accel-
. Shift the select lever into the “N” erator pedal)
position. ! To increase the speed (by control
lever) 1. Depress the accelerator pedal to
The cruise control set indicator light on the accelerate the vehicle to the desired
combination meter turns off when the speed.
cruise control is canceled. 2. Push the control lever downward in the
“SET/COAST” direction once. Now the
To resume the cruise control after it has desired speed is set and the vehicle will
been temporarily canceled and with vehi- keep running at that speed without de-
cle speed of approximately 20 mph (32 pressing the accelerator pedal.
km/h) or more, push the control lever
upward in the “RES/ACC” direction to
return to the original cruising speed auto- NOTE
matically. If the difference between the actual
The cruise control set indicator light on the vehicle speed when the control lever
combination meter will automatically illu- is pushed downward and the speed last
minate at this time. time you set is less than 4 mph (6.8
Push the control lever upward in the “RES/ km/h), the vehicle speed will be low-
ACC” direction and hold it until the vehicle ered by 1 mph (1.6 km/h). This occurs
& To turn off the cruise control reaches the desired speed. Then, release because the cruise control system unit
There are two ways to turn off the cruise the control lever. The vehicle speed at that regards this lever operation as that
control: moment will be memorized and treated as intended to decrease the vehicle
. Push the main switch again. the new set speed. speed.
. Turn the ignition switch to the “Acc” or
When the difference between the actual
“LOCK” position (but only when the
vehicle speed and the set speed is less
vehicle is completely stopped).
than 4 mph (6.8 km/h), the set speed can
be increased 1 mph (1.6 km/h) each time
by pressing the control lever upward in the
“RES/ACC” direction quickly.
Starting and operating 7-33
! To decrease the speed (by control ! To decrease the speed (by brake
lever) pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the control lever
downward in the “SET/COAST” direction
once. Now the desired speed is set and
the vehicle will keep running at that speed
without depressing the accelerator pedal.
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
Driving tips
New vehicle break-in driving – the first Loading your vehicle......................................... 8-11
1,000 miles (1,600 km) ..................................... 8-2 Vehicle capacity weight...................................... 8-12
Fuel economy hints ............................................ 8-2 GVWR and GAWR (Gross Vehicle Weight Rating
Engine exhaust gas (carbon monoxide)............ 8-2 and Gross Axle Weight Rating) ........................ 8-12
Catalytic converter .............................................. 8-3 Roof rails and crossbar (if equipped).................. 8-13
Roof molding and crossbar (if equipped) ............ 8-16
Periodic inspections ........................................... 8-4
Trailer hitch (if equipped) .................................. 8-18
Driving in foreign countries ............................... 8-4
Connecting a trailer ........................................... 8-18
Driving tips for AWD models.............................. 8-4 When you do not tow a trailer ............................ 8-20
On-pavement and off road driving..................... 8-5 Trailer towing ..................................................... 8-20
Winter driving ...................................................... 8-7 Warranties and maintenance .............................. 8-20
Operation during cold weather............................. 8-7 Maximum load limits .......................................... 8-20
Driving on snowy and icy roads .......................... 8-9 Trailer hitches.................................................... 8-23
Corrosion protection .......................................... 8-10 Connecting a trailer ........................................... 8-24
Snow tires ......................................................... 8-10 Trailer towing tips .............................................. 8-26
Tire chains ......................................................... 8-11 8
Rocking the vehicle............................................ 8-11
8-2 Driving tips
New vehicle break-in driving Fuel economy hints Engine exhaust gas (carbon
– the first 1,000 miles (1,600 monoxide)
The following suggestions will help to save
km) your fuel.
The performance and long life of your . Select the proper gear position for the WARNING
vehicle are dependent on how you handle speed and road conditions.
. Avoid sudden acceleration or decelera- . Never inhale engine exhaust gas.
and care for your vehicle while it is new.
tion. Always accelerate gently until you Engine exhaust gas contains
Follow these instructions during the first
reach the desired speed. Then try to carbon monoxide, a colorless
1,000 miles (1,600 km):
maintain that speed for as long as and odorless gas which is dan-
. Do not race the engine. And do not gerous, or even lethal, if inhaled.
allow engine speed to exceed 4,000 rpm possible.
except in an emergency. . Do not pump the accelerator and avoid . Always properly maintain the en-
racing the engine. gine exhaust system to prevent
. Do not drive at one constant engine or
. Avoid unnecessary engine idling. engine exhaust gas from enter-
vehicle speed for a long time, either fast or
ing the vehicle.
slow. . Keep the engine properly tuned.
. Avoid starting suddenly and rapid . Keep the tires inflated to the correct . Never run the engine in a closed
acceleration, except in an emergency. pressure shown on the tire placard, which space, such as a garage, except
is located under the door latch on the for the brief time needed to drive
. Avoid hard braking, except in an
driver’s side. Low pressure will increase the vehicle in or out of it.
emergency.
tire wear and fuel consumption. . Avoid remaining in a parked
The same break-in procedures should be . Use the air conditioner only when vehicle for a lengthy time while
applied to a newly installed or overhauled necessary. the engine is running. If that is
engine or when brake pads or brake . Keep the front and rear wheels in unavoidable, then use the venti-
linings are replaced with new ones. proper alignment. lation fan to force fresh air into
the vehicle.
. Avoid carrying unnecessary luggage or
cargo. . Always keep the front ventilator
inlet grille free from snow, leaves
or other obstructions to ensure
that the ventilation system al-
ways works properly.
. If at any time you suspect that
Driving tips 8-3
exhaust fumes are entering the Catalytic converter reduce HC, CO and NOx in exhaust
vehicle, have the problem gases, thus providing cleaner exhaust.
checked and corrected as soon
To avoid damage to the catalytic conver-
as possible. If you must drive WARNING ter:
under these conditions, drive
only with all windows fully open. . Avoid fire hazards. Do not drive . Use only unleaded gasoline. Even a
or park the vehicle anywhere small amount of leaded gasoline will
. Keep the rear gate closed while damage the catalytic converter.
near flammable materials (e.g.
driving to prevent exhaust gas
grass, paper, rags or leaves), . Never start the engine by pushing or
from entering the vehicle.
because the catalytic converter pulling the vehicle.
operates at very high tempera- . Avoid racing the engine.
NOTE tures. . Never turn off the ignition switch while
Due to the expansion and contraction . Keep everyone and flammable the vehicle is moving.
of the metals used in the manufacture materials away from the exhaust . Keep your engine tuned-up. If you feel
of the exhaust system, you may hear a pipe while the engine is running. the engine running rough (misfiring, back-
crackling sound coming from the ex- The exhaust gas is very hot. firing or incomplete combustion), have
haust system for a short time after the your vehicle checked and repaired by an
engine has been shut off. This sound is authorized SUBARU dealer.
normal. . Do not apply undercoating or rust
prevention treatment to the heat shield of
catalytic converter and the exhaust sys-
tem.
. Do not drive with an extremely low fuel
level.
Periodic inspections Driving in foreign countries Driving tips for AWD models
To keep your vehicle in the best condition When planning to use your vehicle in
at all times, always have the recom- another country: WARNING
mended maintenance services listed in . Confirm the availability of the correct
the maintenance schedule in the “War- . Always maintain a safe driving
fuel. Refer to “Fuel requirements” F7-2.
ranty and Maintenance Booklet” per- speed according to the road and
. Comply with all regulations and re- weather conditions in order to
formed at the specified time or mileage quirements of each country.
intervals. avoid having an accident on a
sharp turn, during sudden brak-
ing or under other similar condi-
tions.
. Always use the utmost care in
driving – overconfidence be-
cause you are driving an All-
Wheel Drive model could easily
lead to a serious accident.
power to all four wheels. AWD models vehicle and may affect ride, handling, On-pavement and off road
provide better traction when driving on braking, speedometer/odometer calibra-
slippery, wet or snow-covered roads and tion, and clearance between the body
driving
when moving out of mud, dirt and sand. and tires. It also may be dangerous and
By shifting power between the front and lead to loss of vehicle control. WARNING
rear wheels, SUBARU AWD can also . If you use a temporary spare tire to
provide added traction during accelera- replace a flat tire, be sure to use the . In a rollover crash, an unbelted
tion, and added engine braking force original temporary spare tire stored in the person is significantly more
during deceleration. vehicle. Using other sizes may result in likely to die than a person wear-
Therefore, your SUBARU AWD vehicle severe mechanical damage to the drive ing a seatbelt. You the driver and
may handle differently than an ordinary train of your vehicle. all your passengers should fas-
two wheel drive vehicle and it contains . Always check the cold tire pressure ten the seatbelts before starting
some features unique to AWD. For safety before starting to drive. The recom- to drive in order to minimize the
purposes as well as to avoid damaging mended tire pressure is provided on the chance of serious injury or death.
the AWD system, you should keep the tire placard, which is located under the . Do not make sharp turns and
following tips in mind. door latch on the driver’s side. quick maneuvers unless abso-
. An AWD model is better able to climb . There are some precautions that you lutely unavoidable. Such actions
steeper roads under snowy or slippery must observe when towing your vehicle. are dangerous as you may lose
conditions than a two wheel drive vehicle. For detailed information, refer to “Towing” control, possibly resulting in a
There is little difference in handling, F9-14. rollover which could cause death
however, during extremely sharp turns or or serious injury.
sudden braking. Therefore, when driving . Always maintain a safe driving
down a slope or turning corners, be sure speed according to the road and
to reduce your speed and maintain an weather conditions in order to
ample distance from other vehicles. avoid having an accident on a
. When replacing a tire, make sure you sharp turn, during sudden brak-
use only the same size, circumference, ing or under other similar condi-
construction, brand, and load range as the tions.
original tires listed on the tire placard.
. Whenever strong crosswinds are
Using other sizes, circumferences or
present, slow down sufficiently
construction may result in severe mechan-
to maintain control of your vehi-
ical damage to the drive train of your
cle. Remember that your vehicle,
– CONTINUED –
8-6 Driving tips
with its higher profile and center SUBARU off-road, certain common sense crossing shallow streams, first check the
of gravity, is more likely to be precautions such as those in the following depth of the water and the bottom of the
affected by crosswinds than or- list should be taken. stream bed for firmness and ensure that
dinary passenger cars. . Make certain that you and all of your the bed of the stream is flat. Drive slowly
. Always use the utmost care in passengers are wearing seatbelts. and completely through the stream. The
driving – overconfidence be- . Carry some emergency equipment, water should be shallow enough that it
cause you are driving an All- such as a towing rope or chain, a shovel, does not reach the vehicle’s undercar-
Wheel Drive model could easily wheel blocks, first aid kit and cell phone or riage. Water entering the engine air intake
lead to a serious accident. citizens band radio. or the exhaust pipe or water splashing
. Drive carefully. Do not take unneces- onto electrical parts may damage your
Your vehicle is classified as a utility sary risks by driving in dangerous areas or vehicle and may cause it to stall. Never
vehicle. Utility vehicles feature a higher over rough terrain. attempt to drive through rushing water;
ground clearance which enables them to regardless of its depth, it can wash away
. Slow down and employ extra caution at the ground from under your tires, resulting
be used for wide applications including off- all times. When driving off-road, you will
road driving. But please keep in mind that in possible loss of traction and even
not have the benefit of marked traffic vehicle rollover.
your vehicle is neither a conventional off- lanes, banked curves, traffic signs and
road vehicle nor an all-terrain vehicle. A the like. . Always check your brakes for effec-
higher center of gravity in relation to the tiveness immediately after driving in sand,
. Do not drive across steep slopes. mud or water. Do this by driving slowly
tread width as compared with ordinary Instead, drive either straight up or straight
passenger cars makes vehicles of this and stepping on the brake pedal. Repeat
down the slopes. A vehicle can much that process several times to dry out the
type more likely to roll over. In reality, utility more easily tip over sideways than it can
vehicles have a significantly higher roll- brake discs and brake pads.
end over end. Avoid driving straight up or
over rate than other types of vehicles. The down slopes that are too steep. . Do not drive or park over or near
high ground clearance of this vehicle is a flammable materials such as dry grass or
. Avoid sharp turning maneuvers, espe- fallen leaves, as they may burn easily. The
real advantage, giving you a better view of
cially at higher speeds. exhaust system is very hot while the
the road and allowing you to anticipate
problems earlier. However, remember that . Do not grip the inside or spokes of the engine is running and right after engine
your utility vehicle is not designed for high- steering wheel. A bad bump could jerk the stops. This could create a fire hazard.
speed cornering comparable to ordinary wheel and injure your hands. Instead drive . After driving through tall grass, mud,
passenger cars and that your vehicle with your fingers and thumbs on the rocks, sand, rivers, etc., check that there
could roll over if you make a sharp turn outside of the rim. is no grass, bush, paper, rags, stones,
at high speed. If you do take your . If driving through water, such as when sand, etc. adhering to or trapped on the
Driving tips 8-7
underbody. Clear off any such matter from under hard-driving conditions such as Winter driving
the underbody. If the vehicle is used with rough roads or off roads will necessitate
these materials trapped or adhering to the more frequent replacement of engine oil,
underbody, a mechanical breakdown or brake fluid and transmission oil than that
fire could occur. specified in the maintenance schedule
. Secure all cargo carried inside the described in the “Warranty and Mainte-
vehicle and make certain that it is not nance Booklet”.
piled higher than the seatbacks. During
sudden stops or jolts, unsecured cargo Remember that damage done to your
could be thrown around in the vehicle and SUBARU while operating it off-road and
cause injury. Do not pile heavy loads on not using common sense precautions
the roof. Those loads raise the vehicle’s such as those listed above is not eligible
center of gravity and make it more prone for warranty coverage.
to tip over.
. If you must rock the vehicle to free it
from sand or mud, depress the accelerator & Operation during cold
pedal slightly and move the select lever weather
back and forth between “D” and “R” Carry some emergency equipment, such
repeatedly. Do not race the engine. For as a window scraper, a bag of sand,
the best possible traction, avoid spinning flares, a small shovel and jumper cables.
the wheels when trying to free the vehicle.
. When the road surface is extremely Check the battery and cables. Cold
slippery, you can obtain better traction by temperatures reduce battery capacity.
starting the vehicle with the transmission The battery must be in good condition to
in 2nd than 1st. provide enough power for cold winter
. Never equip your vehicle with tires starts.
larger than those specified in this manual. Use an engine oil of proper grade and
. Wash the vehicle’s underbody after off- viscosity for cold weather. Heavy summer
road driving. Suspension components are oil will cause harder starting.
particularly prone to dirt buildup, so they
need to be washed thoroughly. Keep the door locks from freezing by
. Frequent driving of an AWD model squirting them with deicer or glycerin.
– CONTINUED –
8-8 Driving tips
Forcing a frozen door open may damage washer nozzles by operating the washer could make the pedals slippery and
or separate the rubber weather strips for a certain period of time. Otherwise, if driving dangerous.
around the door. If the door is frozen, the concentration of the fluid remaining in
use hot water to melt the ice, and after- the piping is too low for the outside While warming up the vehicle before
wards thoroughly wipe the water away. temperature, it may freeze and block the driving, check that the accelerator pedal,
nozzles. brake pedal, and all other controls operate
Use a windshield washer fluid that con- smoothly.
tains an antifreeze solution. Do not use CAUTION
engine antifreeze or other substitutes Clear away ice and snow that has
because they may damage the paint of accumulated under the fenders to avoid
. Adjust the washer fluid concen-
the vehicle. making steering difficult. During severe
tration appropriately for the out-
winter driving, stop when and where it is
SUBARU Windshield Washer Fluid con- side temperature. If the concen-
safe to do so and check under the fenders
tains 58.5% methyl alcohol and 41.5% tration is inappropriate, sprayed
periodically.
surfactant, by volume. Its freezing tem- washer fluid may freeze on the
perature varies according to how much it windshield and obstruct your ! Parking in cold weather
is diluted, as indicated in the following view, and the fluid may freeze in
table. the reservoir tank. WARNING
. State or local regulations on Snow can trap dangerous exhaust
Washer Fluid Con-
centration Freezing Temperature volatile organic compounds may gases under your vehicle. Keep
restrict the use of methanol, a snow clear of the exhaust pipe and
30% 10.48F (−128C) common windshield washer anti- from around your vehicle if you park
50% −48F (−208C) freeze additive. Washer fluids the vehicle in snow with the engine
containing non-methanol anti- running.
100% −498F (−458C) freeze agents should be used
only if they provide cold weather Do not use the parking brake when
In order to prevent freezing of washer
protection without damaging parking for long periods in cold weather
fluid, check the freezing temperatures in
your vehicle’s paint, wiper blades since it could freeze in that position.
the table above when adjusting the fluid
or washer system. Instead, you should observe the following
concentration to the outside temperature.
If you fill the reservoir tank with a fluid with tips.
a different concentration from the one ! Before driving your vehicle 1. Place the select lever in “P” position.
used previously, purge the old fluid from Before entering the vehicle, remove any 2. Use tire stops under the tires to
the piping between the reservoir tank and snow or ice from your shoes because that prevent the vehicle from moving.
Driving tips 8-9
When the vehicle is parked in snow or & Driving on snowy and icy vior can cause the wheels to lock, possibly
when it snows, raise the wiper blades off roads leading to loss of vehicle control.
the glass to prevent damage to them. An anti-lock brake system (ABS) en-
When the vehicle has been left parked WARNING hances your vehicle’s braking perfor-
after use on roads heavily covered with mance on snowy and icy roads. For
snow, or has been left parked during a Do not use the cruise control on information about braking on slippery
snowstorm, icing may develop on the slippery roads such as snowy or icy surfaces, refer to “ABS (Anti-lock Brake
brake system, which could cause poor roads. This may cause loss of System)” F7-20 and “Vehicle Dynamics
braking action. Check for snow or ice vehicle control. Control system” F7-23.
buildup on the suspension, disc brakes ! Wiper operation when snowing
and brake hoses underneath the vehicle. Before driving in cold weather, make sure
CAUTION
If there is caked snow or ice, remove it, the wiper blades are not frozen to the
being careful not to damage the disc Avoid prolonged continuous driving windshield or rear window. If the wiper
brakes and brake hoses and ABS har- in snowstorms. Snow will enter the blades are frozen to the windshield or rear
ness. engine’s intake system and may window, use the defroster with the airflow
hinder the airflow, which could re- control button in the “ ” position and the
! Refueling in cold weather sult in engine shutdown or even temperature control dial set for maximum
To help prevent moisture from forming in breakdown. warmth until the wiper blades are com-
the fuel system and the risk of its freezing, pletely thawed out. The wiper deicer is
use of an antifreeze additive in the fuel To prevent skidding and slipping, avoid helpful to thaw the windshield wiper
tank is recommended during cold weather. sudden braking, abrupt acceleration, high- blades. To thaw out the rear wiper blade,
Use only additives that are specifically speed driving, and sharp turning when use the rear window defogger.
designed for this purpose. When an driving on snowy or icy roads.
antifreeze additive is used, its effect lasts When driving in snow, if frozen snow starts
Always maintain ample distance between
longer if the tank is refilled whenever the to stick on the surface of the windshield
your vehicle and the vehicle ahead of you
fuel level reaches half empty. despite wiper operation, use the defroster
to avoid the need for sudden braking.
with the airflow control button in “ ” and
If your SUBARU is not going to be used To supplement the foot brake, use the the temperature control dial set for max-
for an extended period, it is best to have engine brake effectively to control the imum warmth. After the windshield gets
the fuel tank filled to capacity. vehicle speed. (Shift into a lower gear warmed enough to melt the frozen snow
when necessary.) on it, wash it away using the windshield
Avoid shifting down abruptly. Such beha- washer.
– CONTINUED –
8-10 Driving tips
Snow stuck on the wiper arm prevents the & Snow tires Your vehicle is equipped with “all season
wiper from working effectively. If snow is tires” which are designed to provide an
stuck on the wiper arm, pull off the road to WARNING adequate measure of traction, handling
a safe place, then remove it. If you stop and braking performance in year-round
the vehicle at road side, use the hazard . When replacing original tires with driving. In winter, it may be possible to
warning flasher to alert other drivers. winter (snow) tires, make sure enhance performance through use of tires
you use only the same size and designed specifically for winter driving
We recommend use of non-freezing type conditions.
construction as recommended.
wiper blades (winter blades) during the
Using other sizes or construction If you choose to install winter tires on your
seasons in which you could have snow
may affect speedometer/od- vehicle, be sure to use the correct tire size
and freezing temperatures. Blades of this
ometer calibration and clearance and type. You must install four winter tires
type give superior wiping performance in
between the body and tires. It that are of the same size, construction,
snowy conditions. Be sure to use blades
also may be dangerous and lead brand and load range and you should
that are suitable for your vehicle.
to loss of vehicle control. never mix radial, belted bias or bias tires
CAUTION . You must install four winter tires since this may result in dangerous hand-
that are of the same size, circum- ling characteristics. When you choose a
During high-speed driving, non- ferences, construction, brand, tire, make sure that there is enough
freezing type wiper blades may not and load range. Mixing other clearance between the tire and vehicle
perform as well as standard wiper sizes, circumferences or con- body.
blades. If this happens, reduce the structions may result in severe Remember to drive with care at all times
vehicle speed. mechanical damage to the drive regardless of the type of tires on your
train of your vehicle and may vehicle.
affect ride, handling, braking and
NOTE speedometer/odometer calibra- Your vehicle comes with P255/55R18
When the season requiring non-freez- tion. It also may be dangerous “all season tires” as original equip-
ing type wiper blades is over, replace and lead to loss of vehicle con- ment. You should be aware that some
them with standard wiper blades. trol. winter tires with that same size desig-
. Do not use a combination of nation may actually be too large for the
& Corrosion protection radial, belted bias or bias tires vehicle and may cause rubbing on
since it may cause dangerous sharp turns. Listed in the following is
Refer to “Corrosion protection” F10-4. the winter tire size that we recommend.
handling characteristics and lead
to an accident.
Driving tips 8-11
NOTE
For better fuel economy, do not carry
unneeded cargo.
adjusted by relocating luggage inside the & Roof rails and crossbar (if ment and cargo does not exceed
vehicle. equipped) the maximum load limit. Over-
Even if the total weight of your luggage is loading may cause damage to
lower than the vehicle capacity weight, the vehicle and create a safety
either front or rear GAW may exceed the hazard.
GAWR, depending on the distribution of
the luggage. The roof rails are not designed to carry
When possible, the load should be evenly cargo by themselves. Cargo can be
distributed throughout the vehicle. carried after securing the roof crossbar
If you carry heavy loads in the vehicle, you kit to the roof rail and installing the
should confirm that GVW and front and appropriate carrying attachment. When
rear GAWs are within the GVWR and installing the roof crossbar kit, follow the
GAWR by putting your vehicle on a manufacturer’s instructions.
vehicle scale, found at a commercial When you carry cargo on the roof using
weighing station. the roof crossbar kit and a carrying
1) Roof rails attachment, never exceed the maximum
Do not use replacement tires with a lower 2) Crossbar kit
load range than the originals because they load limit as explained below. You should
may lower the GVWR and GAWR limita- also be careful that your vehicle does not
tions. Replacement tires with a higher load CAUTION exceed the Gross Vehicle Weight Rating
range than the originals do not increase (GVWR) and front and rear Gross Axle
the GVWR and GAWR limitations. . For cargo carrying purposes, the Weight Rating (GAWR). For information
roof rail must be used together on loading cargo into or onto your vehicle,
with a roof crossbar kit and the refer to “Loading your vehicle” F8-11. The
appropriate carrying attachment. maximum load limit of the cargo, cross-
The roof rail must never be used bars and carrying attachment must not
alone to carry cargo. Otherwise, exceed 150 lbs (68 kg). Place the
damage to the roof or paint or a heaviest load at the bottom, nearest the
dangerous road hazard due to roof, and evenly distribute the cargo.
loss of cargo could result. Always properly secure all cargo.
. When using the roof crossbar kit,
make sure that the total weight of
the crossbars, carrying attach-
– CONTINUED –
8-14 Driving tips
! Installing carrying attachments on ! To remove the crossbar 2. Carefully raise the crossbar from roof
the crossbars rails.
When installing any carrying attachment
such as a bike carrier, ski carrier, kayak ! To install the crossbar
carrier, cargo basket, etc. on the cross- Front crossbar:
bars, follow the manufacturer’s instruc- Front crossbar has a 150 lbs (68 kg) load
tions and make sure that the attachment is label on left-hand side.
securely fixed to the crossbars. Use only
attachments designed specifically for the
crossbars. A set of the crossbars is
designed to carry loads (cargo and attach-
ment) of not more than 150 lbs (68 kg).
Before operating the vehicle, make sure
that the cargo is properly secured on the
attachment. 1. Loosen and remove the T-30 torx®
NOTE head screw from the top of each crossbar
end support.
Remember that the vehicle’s center of
Loosen the lower clamps.
gravity is altered with the weight of the
load on the roof, thus affecting the
driving characteristics. 1) T-25 torx® head screw
Drive carefully. Avoid rapid starts, hard
cornering and abrupt stops. Crosswind 1. Make sure that the T-25 torx® head
effects will be increased. screw on the back of each crossbar end
support is tightened correctly.
! Removal and installation of the 2. Before placing the crossbar on the roof
crossbars rails, make sure that the T-30 torx® head
The crossbars can be removed when you screw is removed from the top of each
do not use the roof to carry cargo. crossbar end support.
Driving tips 8-15
3. The crossbar with a 150 lbs (68 kg) 1) 12 in (300 mm) 1) Lower clamp
load label attached onto it is the front 2) T-30 torx® head screw
4. Install the front crossbar so that the
crossbar. An arrow is marked on the back crossbar end supports are located ap- 5. Tighten the lower clamps onto the
of the front crossbar for correct installa- proximately 12 in (300 mm) rearward from crossbar. Using a torque wrench, loosely
tion. Install the front crossbar so that the the joints between the roof rails and the tighten the T-30 torx® head screws.
arrow faces the front of the vehicle. front roof rail supports.
NOTE
It may be necessary to squeeze the
lower clamp and the end support
together to compress the pads and
gain a better alignment of the pieces
while trying to start the screw. Use care
not to cross-thread the screw in the
insert.
– CONTINUED –
8-16 Driving tips
CAUTION CAUTION
Do not carry cargo on the roof when . For cargo carrying purposes, the
the crossbars are removed. Lug- roof molding must be used to-
gage on the roof will be thrown gether with a roof crossbar kit
forward or backward in sudden and the appropriate carrying at-
stops or rapid accelerations, result- tachment. Otherwise, damage to
ing in a dangerous road hazard. the roof or paint or a dangerous
Driving tips 8-17
road hazard due to loss of cargo secure all cargo. ! Removal and installation of the
could result. ! Installing carrying attachments on crossbars
. When using the roof crossbar kit, the crossbars
make sure that the total weight of When installing any carrying attachment
the crossbars, carrying attach- such as a bike carrier, ski carrier, kayak
ment and cargo does not exceed carrier, cargo basket, etc. on the cross-
the maximum load limit. Over- bars, follow the manufacturer’s instruc-
loading may cause damage to tions and make sure that the attachment is
the vehicle and create a safety securely fixed to the crossbars. Use only
hazard. attachments designed specifically for the
crossbars. A set of the crossbars is
Cargo can be carried after securing the designed to carry loads (cargo and attach-
roof crossbar kit to the roof molding and ment) of not more than 150 lbs (68 kg).
installing the appropriate carrying attach- Before operating the vehicle, make sure
ment. When installing the roof crossbar that the cargo is properly secured on the
kit, follow the manufacturer’s instructions. attachment. Each of the two roof moldings has two
When you carry cargo on the roof using mounting points for crossbars. Each
the roof crossbar kit and a carrying NOTE mounting point is fitted with a cover. Use
attachment, never exceed the maximum Remember that the vehicle’s center of a screwdriver to remove the covers. When
load limit as explained below. You should gravity is altered with the weight of the installing the crossbars on the roof mold-
also be careful that your vehicle does not load on the roof, thus affecting the ing, follow the manufacturer’s instructions.
exceed the Gross Vehicle Weight Rating driving characteristics.
(GVWR) and front and rear Gross Axle Drive carefully. Avoid rapid starts, hard
Weight Rating (GAWR). Refer to the cornering and abrupt stops. Crosswind
“Loading your vehicle” section in this effects will be increased.
chapter for information on loading cargo
into or onto your vehicle. The maximum
load limit of the cargo, crossbars and
carrying attachment must not exceed 150
lbs (68 kg). Place the heaviest load at the
bottom, nearest the roof, and evenly
distribute the cargo. Always properly
8-18 Driving tips
Trailer hitch (if equipped) has safety chains and that each
Maximum Maximum
chain will hold the trailer’s max- gross trailer gross tongue
imum gross weight. Towing trai- weight weight
lers without safety chains could Vehicle with- 2,000 lbs 200 lbs
create a traffic safety hazard if out cooling kit (906 kg) (90 kg)
the trailer separates from the 350 lbs
Vehicle with 3,500 lbs
hitch due to coupling damage or cooling kit (1,587 kg) (158 kg)
hitch ball damage.
. Be sure to check the hitch pin When you tow a trailer, follow the instruc-
and safety pin for positive lock- tions in “Trailer towing” F8-20.
ing placement before towing a
trailer. If the ball mount comes off & Connecting a trailer
the hitch receiver, the trailer 1. Remove the receiver cover from the
could get loose and create a hitch receiver tube. Then insert the ball
traffic safety hazard. mount into the hitch receiver tube.
1) Trailer hitch
. Use only the ball mount supplied
with this hitch. Use the hitch only
WARNING as a weight carrying hitch. Do not
use with any type of weight
. Never exceed the maximum distributing hitch.
weight specified for the trailer
hitch. Exceeding the maximum The maximum gross trailer weight and
weight could cause an accident maximum gross tongue weight are indi-
resulting in serious personal in- cated in the following table.
juries. Permissible trailer weight
changes depending on the situa-
tion. For possible recommenda-
tions and limitations, refer to
“Trailer towing” F8-20.
2. Insert the hitch pin into the hole on the
. Trailer brakes are required when hitch receiver tube so that the pin passes
the towing load exceeds 1,000 through the ball mount.
lbs (453 kg). Be sure your trailer
Driving tips 8-19
NOTE
1) Hitch ball installation point Always disconnect the trailer wire har-
2) Hooks for safety chains ness before launching or retrieving a
– CONTINUED –
8-20 Driving tips
– CONTINUED –
8-22 Driving tips
! Gross Vehicle Weight (GVW) and (GAW) must never exceed the Gross Axle
Gross Vehicle Weight Rating Weight Rating (GAWR). The front and rear
(GVWR) GAWs can be adjusted by relocating
passengers and luggage inside the vehi-
cle. The front and rear GAWR are also
shown on the certification label.
Certification label
! Tongue load Vehicle without cooling kit: 200 lbs (90 kg)
Vehicle with cooling kit: 350 lbs (158 kg)
F: Front
Tongue load The tongue load can be adjusted by
1) Jack proper distribution of the load in the trailer.
WARNING 2) Bathroom scale Never load the trailer with more weight in
The tongue load can be weighed with a the back than in the front; approximately
If the trailer is loaded with more 60 percent of the trailer load should be in
bathroom scale as shown in the illustration
weight in the back of trailer’s axle the front and approximately 40 percent in
above. When weighing the tongue load,
than in the front, the load is taken off the rear. Also, distribute the load as evenly
be sure to position the towing coupler at
the rear axle of the towing vehicle. as possible on both the left and right
the height at which it would be during
This may cause the rear wheels to sides.
actual towing, using a jack as shown.
skid, especially during braking or
Be sure that all cargo is firmly secured to
when vehicle speed is reduced dur-
prevent a change in weight distribution
ing cornering, resulting in over-
while driving.
steer, spin out and/or jackknifing.
Ensure that the trailer tongue load is from & Trailer hitches
8 to 11 percent of the total trailer weight
and does not exceed the appropriate one WARNING
of the following maximum values.
Never drill the frame or under-body
– CONTINUED –
8-24 Driving tips
create a traffic safety hazard. blind spots occur with the vehicle’s stan- temporary spare tire when towing
For safety, always connect the towing dard side mirrors, use towing mirrors that can result in failure of the spare tire
vehicle and trailer with trailer safety conform with Federal, state/province and/ and/or less stability of the vehicle.
chains. Pass the chains crossing each or other applicable regulations.
other under the trailer tongue to prevent ! Trailer lights Make sure that all the tires on your vehicle
the trailer from dropping onto the ground are properly inflated.
in case the trailer tongue should discon- CAUTION The recommended cold tire pressure
nect from the hitch ball. Allow sufficient
under trailer towing conditions is shown
slack in the chains taking tight-turn situa- Direct splicing or other improper in “Tires” F12-4 and in “GAS STATION
tions into account; however, be careful not connection of trailer lights may REFERENCE” at the end of this manual.
to let them drag on the ground. damage your vehicle’s electrical Adjust the rear tire pressure to the
For more information about the safety system and cause a malfunction of recommended pressure when the tires
chain connection, refer to the instructions your vehicle’s lighting system. are cold. Normal pressure should be
for your hitch and trailer. maintained in the front tires.
! Side mirrors Connection of trailer lights to your vehi-
cle’s electrical system requires modifica- Trailer tire condition, size, load rating and
tions to the vehicle’s lighting circuit to proper inflation pressure should be in
increase its capacity and accommodate accordance with the trailer manufacturer’s
wiring changes. To ensure the trailer lights specifications.
are connected properly, please consult
your SUBARU dealer. Check for proper In the event your vehicle gets a flat tire
operation of the turn signals, the brake when towing a trailer, ask a commercial
lights and parking lights each time you road service to repair the flat tire.
hitch up. If you carry a regular size spare tire in your
! Tires vehicle or trailer as a precaution against
getting a flat tire, be sure that the spare
WARNING tire is firmly secured.
& Trailer towing tips . Check that the vehicle and trailer are . Slow down before turning. Make a
connected properly. Confirm that longer than normal turning radius because
CAUTION – the trailer tongue is connected the trailer wheels will be closer than the
properly to the hitch ball. vehicle wheels to the inside of the turn. In
. Never exceed 45 mph (72 km/h) – the trailer lights connector is con- a tight turn, the trailer could hit your
when towing a trailer in hilly nected properly and trailer’s brake vehicle.
country on hot days. lights illuminate when the vehicle’s . Crosswinds will adversely affect the
. When towing a trailer, steering, brake pedal is pressed, and that the handling of your vehicle and trailer, caus-
stability, stopping distance and trailer’s turn signal lights flash when ing sway. Crosswinds can be due to
braking performance will be dif- the vehicle’s turn signal lever is oper- weather conditions or the passing of large
ferent from normal operation. For ated. trucks or buses. If swaying occurs, firmly
safety’s sake, you should employ – the safety chains are connected grip the steering wheel and slow down
extra caution when towing a properly. immediately but gradually.
trailer and you should never – all cargo in the trailer is secured . When passing other vehicles, consid-
speed. You should also keep the safely in position. erable distance is required because of the
following tips in mind: – the side mirrors provide a good added weight and length caused by
rearward field of view without a sig- attaching the trailer to your vehicle.
! Before starting out on a trip nificant blind spot.
. Sufficient time should be taken to learn
. Check that the vehicle and vehicle-to-
the “feel” of the vehicle/trailer combination
hitch mounting are in good condition. If
before starting out on a trip. In an area free
any problems are apparent, do not tow the
of traffic, practice turning, stopping and
trailer.
backing up.
. Check that the vehicle sits horizontally
with the trailer attached. If the vehicle is ! Driving with a trailer
tipped sharply up at the front and down at . You should allow for considerably more
the rear, check the total trailer weight, stopping distance when towing a trailer.
GVW, GAWs and tongue load again, then Avoid sudden braking because it may
confirm that the load and its distribution result in skidding or jackknifing and loss of
are acceptable. control.
. Check that the tire pressures are . Avoid uneven steering, sharp turns and 1) Left turn
correct. rapid lane changes. 2) Right turn
Driving tips 8-27
. Backing up with a trailer is difficult and air conditioner and stop the vehicle in the 3. When the wheel blocks are in place,
takes practice. When backing up with a nearest safe location. For further instruc- release the regular brakes slowly until the
trailer, never accelerate or steer rapidly. tions and additional information, refer to blocks absorb the load.
When turning back, grip the bottom of the the following sections. 4. Apply the regular brakes and then
steering wheel with one hand and turn it to – “If you park your vehicle in an apply the parking brake; slowly release
the left for a left turn, and turn it to the right emergency” F9-2 the regular brakes.
for a right turn. – “Engine overheating” F9-14 5. Shift into “P” and shut off the engine.
. If the ABS warning light illuminates – “Temperature gauge” F3-9
while the vehicle is in motion, stop towing – “AT OIL TEMP warning light” F3-13
the trailer and have repairs performed
immediately by the nearest SUBARU NOTE
dealer. The temperature of engine coolant is
! Driving on grades less likely to rise to the OVERHEAT
zone in the “D” position than in the
. Before going down a steep hill, slow
manual mode position.
down and shift into lower gear (if neces-
sary, use 1st gear) in order to utilize the . Avoid using the accelerator pedal to
engine braking effect and prevent over- stay stationary on an uphill slope instead
heating of your vehicle’s brakes. Do not of using the parking brake or foot brake.
make sudden downshifts. That may cause the transmission fluid to
. When driving uphill in hot weather, the overheat.
air conditioner may turn off automatically ! Parking on a grade
to protect the engine from overheating. Always block the wheels under both
. When driving uphill in hot weather, pay vehicle and trailer when parking. Apply
attention to the water temperature gauge the parking brake firmly. You should not
pointer and AT OIL TEMP warning light park on a hill or slope. But if parking on a
because the engine and transmission are hill or slope cannot be avoided, you
relatively prone to overheating under should take the following steps.
these conditions. If the water temperature 1. Apply the brakes and hold the pedal
gauge pointer approaches the OVER- down.
HEAT zone or the AT OIL TEMP warning
light illuminates, immediately turn off the 2. Have someone place wheel blocks
under both the vehicle and trailer wheels.
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
In case of emergency
If you park your vehicle in an emergency......... 9-2 Engine overheating ........................................... 9-14
Spare tire ............................................................. 9-2 If steam is coming from the engine
Removing the spare tire ...................................... 9-3 compartment ................................................... 9-14
Re-storage of spare tire ....................................... 9-4 If no steam is coming from the engine
compartment ................................................... 9-14
Temporary spare tire........................................... 9-5
Flat tires............................................................... 9-6 Towing ................................................................ 9-14
Towing and tie-down hooks................................ 9-15
Changing a flat tire.............................................. 9-6
Using a flat-bed truck......................................... 9-17
Tire pressure monitoring system (TPMS) ............ 9-10
Towing with all wheels on the ground................. 9-17
Jump starting ..................................................... 9-11
Rear gate – if the rear gate cannot be
How to jump start............................................... 9-12
unlocked.......................................................... 9-18
Maintenance tools ............................................. 9-19
Jack and jack handle ......................................... 9-19
9
9-2 In case of emergency
carefully read “Temporary spare tire” F9-5 temporary spare tire is on the ground with
for instructions and precautions. enough cable slack to allow you to pull it
out from under the vehicle.
& Removing the spare tire
CAUTION
1. Take the wheel nut wrench and exten-
sion out of the tool bag. Refer to “Main- . Be sure to remove (not simply
tenance tools” F9-19. keep it open) the subfloor sto-
rage lid before turning the wheel
nut wrench, otherwise the lid
may be damaged.
. Do not put your fingers into the
center hole of the temporary
5. Fit the extension onto the hex-head spare tire while you pulling it
hoist shaft end. out, because they might be
pinched in between the wheel
and the retainer.
and pull it through the center of the . When using the spare tire hoist: CAUTION
temporary spare tire. After the temporary spare tire is
9. After the temporary spare tire is removed from the cable, wind the When using the spare tire hoist:
removed from the cable, the cable must cable up completely until the Do not use air tools or power tools
be wound up completely by turning the retainer at end of the cable sits to turn the spare tire hoist shaft end.
hoist nut shaft clockwise until you hear a against the underside of the If you do, it could result in severe
clicking sound. Also visually inspect the vehicle. Driving with the cable mechanical damage to the spare tire
cable to make certain that there is no not retracted fully could result in hoist.
longer any slack present. damage to the adjacent under
floor parts and lead to a serious
accident. & Re-storage of spare tire
. The spare tire holder is designed 1. Turn the spare tire hoist shaft end
to carry only the following kinds counterclockwise with the wheel nut
of tires. wrench to loosen the cable sufficiently
enough to allow the cable end retainer go
– the temporary spare tire that through center hole of the temporary
came with your vehicle spare tire.
– a full-size flat tire
A full size flat tire should be
stowed in the spare tire holder
in an emergency only. After hav-
ing the full-size flat tire repaired,
immediately swap it with the
WARNING temporary spare tire.
Never stow a full-size tire that is
. Do not use the extension when not flat in the spare tire holder.
turning the wheel nuts. If you did, Doing so can result in damage to
you would not be able to achieve adjacent under floor parts and
sufficient tightening torque. The can lead to a serious accident.
wheel nuts could then come
loose, resulting in a serious 2. Insert the retainer through the center
accident. hole of the temporary tire (with the outside
In case of emergency 9-5
of the tire facing up). 5. Fit the lid of the cargo area. Temporary spare tire
CAUTION
WARNING
. When stowing a flat tire in the
spare tire holder, turn the hoist . Never tow a trailer when the
shaft end only slowly. If it is temporary spare tire is used.
turned quickly, the wheel disc of The temporary spare tire is not
the flat tire could be damaged. designed to sustain the towing
. A full-size flat tire should be load. Use of the temporary spare
stowed in the spare tire holder tire when towing can result in
in an emergency only. After hav- failure of the spare tire and/or
ing the flat tire repaired, immedi- less stability of the vehicle and
ately swap it with the temporary may lead to an accident.
3. Turn the hoist shaft end clockwise with spare tire. . When a spare tire is mounted or a
the wheel nut wrench to wind the cable up . Remember that the tread width of wheel rim is replaced without the
completely until you hear a few clicking a flat tire is wider than that of the original pressure sensor/trans-
sounds. Confirm that the temporary spare temporary spare tire. When car- mitter being transferred, the low
tire holding cable has been wound up rying a flat tire stowed in the tire pressure warning light will
completely by shaking the temporary tire. spare tire holder, make sure the illuminate steadily after blinking
tire does not touch any obsta- for approximately one minute.
CAUTION cles. This indicates the tire pressure
monitoring system (TPMS) is un-
If the temporary spare tire is not able to monitor all four road
stored securely, it could damage wheels. Contact your SUBARU
adjacent areas of the vehicle and dealer as soon as possible for
make an abnormal noise. tire and sensor replacement and/
or system resetting.
4. Place the wheel nut wrench and
extension back into the tool bag and store
the jack and tool bag in their storage
locations.
– CONTINUED –
9-6 In case of emergency
The temporary spare tire is smaller and & Changing a flat tire
lighter than a conventional tire and is
designed for emergency use only. Re- WARNING
move the temporary spare tire and re-
install the conventional tire as soon as . Do not jack up the vehicle on an
possible because the spare tire is de- 1) Tread wear indicator bar incline or a loose road surface.
signed only for temporary use. 2) Indicator location mark The jack can come out of the
. When the wear indicator appears on jacking point or sink into the
Check the inflation pressure of the tem-
the tread, replace the tire. ground and this can result in a
porary spare tire periodically to keep the
. The temporary spare tire must be used severe accident.
tire ready for use. The correct pressure is
60 psi (420 kPa, 4.2 kgf/cm2). only on a rear wheel. If a front wheel tire . Use only the jack provided with
gets punctured, replace the wheel with a your vehicle. The jack supplied
When using the temporary spare tire, note rear wheel and install the temporary spare with the vehicle is designed only
the following. tire in place of the removed rear wheel. for changing a tire. That no
. Do not exceed 50 mph (80 km/h). person should place any portion
. Do not put a tire chain on the temporary of their body under a vehicle that
spare tire. Because of the smaller tire size, is supported by a jack.
a tire chain will not fit properly.
. Do not use two or more temporary
spare tires at the same time.
. Do not drive over obstacles. This tire
has a smaller diameter, so road clearance
is reduced.
In case of emergency 9-7
– CONTINUED –
9-8 In case of emergency
8. Loosen the wheel nuts using the wheel head engages firmly into the jack-up point.
nut wrench but do not remove the nuts.
CAUTION
There are 2 types of wheel nut 1) The length of the wheel nut wrench
wrenches that apply to different
lengths. 16. Confirm the length of the equipped
wheel nut wrench and wheel nut tighten-
For models with silver-colored alu- ing torque. Refer to “Tires” F12-4.
minum wheels, the 10.8-inch (275
mm) wheel nut wrench is equipped
as a maintenance tool. And for
models with optional chrome-fin-
ished wheels, the 13.2-inch (335
mm) wheel nut wrench is equipped WARNING
as well. Confirm the equipped wheel
nut wrench type when you replace a Do not use the extension when
tire. If the wheel nut wrench is the turning the wheel nuts. If you did,
different type, it cannot be tightened you would not be able to achieve
to the specified torque. sufficient tightening torque. The
wheel nuts could then come loose,
resulting in a serious accident.
17. Use the wheel nut wrench to securely 18. Store the flat tire in the spare tire
tighten the wheel nuts to the specified
– CONTINUED –
9-10 In case of emergency
SUBARU dealer as soon as possible Jump starting eye protectors, and remove metal
for tire and sensor replacement and/ objects such as rings, bands or
or system resetting. other metal jewelry.
Do not inject any tire liquid or WARNING . Be sure the jumper cables and
aerosol tire sealant into the tires, clamps on them do not have
. Battery fluid is SULFURIC ACID.
as this may cause a malfunction of loose or missing insulation.
Do not let it come in contact with
the tire pressure sensors. Do not jump start unless cables
the eyes, skin, clothing or the
If the light illuminates steadily after in suitable condition are avail-
vehicle.
blinking for approximately one min- able.
If battery fluid gets on you,
ute, promptly contact a SUBARU . A running engine can be danger-
thoroughly flush the exposed
dealer to have the system inspected. ous. Keep your fingers, hands,
area with water immediately. Get
clothing, hair and tools away
medical help if the fluid has
from the cooling fan, belts and
entered your eyes.
any other moving engine parts.
If battery fluid is accidentally Removing rings, watches and
swallowed, immediately drink a ties is advisable.
large amount of milk or water,
. Jump starting is dangerous if it is
and obtain immediate medical
done incorrectly. If you are un-
help.
sure about the proper procedure
Keep everyone including chil- for jump starting, consult a com-
dren away from the battery. petent mechanic.
. The gas generated by a battery
explodes if a flame or spark is When your vehicle does not start due to a
brought near it. Do not smoke or run down (discharged) battery, the vehicle
light a match while jump starting. may be jump started by connecting your
. Never attempt jump starting if the battery to another battery (called the
discharged battery is frozen. It booster battery) with jumper cables.
could cause the battery to burst
or explode.
. Whenever working on or around
a battery, always wear suitable
– CONTINUED –
9-12 In case of emergency
CAUTION
. Use only the specified towing
hooks and tie-down hooks. Never
use suspension parts or other
parts of the body for towing or
tie-down purposes.
. Never use the tie-down hook
closest to the muffler under the 2. Wrap a flat-head screwdriver in vinyl 3. Screw the towing hook into the thread
vehicle for towing purposes. tape or cloth, insert it into the gap between hole until the threads can no longer be
. To prevent deformation to the the cover and the front bumper, and use it seen.
bumper and the towing hook, do to pry the cover open.
not apply excessive lateral load NOTE
to the towing hooks.
. The cover is attached to the front
Front towing hook: bumper with five lugs.
. Do not remove the cover while
1. Take out the towing hook, screwdriver holding the slit.
and wheel nut wrench from the tool bag.
– CONTINUED –
9-16 In case of emergency
After towing, remove the towing hook from 2. Pry off the cover on the rear bumper 4. Tighten the towing hook securely
the vehicle and stow it in the tool bag. using a screwdriver, and you will find a using a wheel nut wrench.
Fit the towing hook cover on the bumper. threaded hole for attaching the towing
hook. After towing, remove the towing hook from
WARNING the vehicle and stow it in the tool bag.
Put the thread hole cover on the rear
. Do not use the towing hook bumper.
except when towing your vehicle.
. Be sure to remove the towing WARNING
hook after towing. Leaving the . Do not use the towing hook
towing hook mounted on the except when towing your vehicle.
vehicle could interfere with prop-
er operation of the SRS airbag . Be sure to remove the towing
system in a frontal collision. hook after towing. Leaving the
towing hook mounted on the
vehicle could interfere with prop-
Rear towing hook: er operation of the SRS airbag
1. Take out the towing hook, screwdriver system in a frontal collision.
and wheel nut wrench from the on board 3. Screw the towing hook into the thread
tool bag. hole until its thread can no longer be seen. Front tie-down hooks:
In case of emergency 9-17
The front tie-down hooks are located & Using a flat-bed truck & Towing with all wheels on the
between each of the front tires and the ground
front bumper.
Rear tie-down hooks:
– CONTINUED –
9-18 In case of emergency
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
————————————————————————————————————————
Appearance care
10
10-2 Appearance care
Exterior care tangled around it, damaging the to dry there. Rinse the vehicle thoroughly
wiper arm and other compo- with plenty of lukewarm water. Wipe the
& Washing nents. Ask the automatic car- remaining water off with a chamois or soft
wash operator not to let the cloth.
CAUTION brushes touch the wiper arm or ! Washing the underbody
to fix the wiper arm on the rear
. When washing the vehicle, the window glass with adhesive tape Chemicals, salts and gravel used for
brakes may get wet. As a result, before operating the machine. deicing road surfaces are extremely cor-
the brake stopping distance will rosive, accelerating the corrosion of un-
be longer. To dry the brakes, derbody components, such as the exhaust
drive the vehicle at a safe speed NOTE system, fuel and brake lines, brake
while lightly pressing the brake When having your vehicle washed in cables, floor pan and fenders, and sus-
pedal to heat up the brakes. an automatic car wash, make sure pension.
beforehand that the car wash is of Thoroughly flush the underbody and in-
. Do not wash the engine compart-
suitable type. side of the fenders with lukewarm or cold
ment and areas adjacent to it. If
The best way to preserve your vehicle’s water at frequent intervals to reduce the
water enters the engine air in-
beauty is frequent washing. Wash the harmful effects of such agents.
take, electrical parts or the power
steering fluid reservoir, it will vehicle at least once a month to avoid Mud and sand adhering to the underbody
cause engine trouble or a mal- contamination by road grime. components may accelerate their corro-
function of the power steering. sion.
Wash dirt off with a wet sponge and plenty
. Do not use any organic solvents of lukewarm or cold water. Do not wash After driving off-road or muddy or sandy
when washing the surface of the the vehicle with hot water and in direct roads, wash the mud and sand off the
bulb assembly cover. However, if sunlight. underbody.
a detergent with organic solvents Carefully flush the suspension and axle
is used to wash the cover sur- Salt, chemicals, insects, tar, soot, tree parts, as they are particularly prone to
face, completely rinse off the sap, and bird droppings should be washed mud and sand buildup. Do not use a
detergent with water. Otherwise, off by using a light detergent, as required. sharp-edged tool to remove caked mud.
the cover surface may be da- If you use a light detergent, make certain
maged. that it is a neutral detergent. Do not use NOTE
strong soap or chemical detergents. All Be careful not to damage brake hoses,
. Since your vehicle is equipped
cleaning agents should be promptly sensor harnesses, and other parts
with a rear wiper, automatic car-
flushed from the surface and not allowed when washing suspension compo-
wash brushes could become
Appearance care 10-3
Cleaning the interior & Leather seat materials or detergent and water, after first vacuum-
The leather used by SUBARU is a high ing or brushing away loose dirt. Allow the
Use a soft, damp cloth to clean the climate quality natural product which will retain its soap to soak in for a few minutes and wipe
control panel, audio equipment, instru- distinctive appearance and feel for many off with a clean, damp cloth. Commercial
ment panel, center console, combination years with proper care. foam-type cleaners suitable for synthetic
meter panel, and switches. (Do not use leather materials may be used when
Allowing dust or road dirt to build up on the necessary.
organic solvents.) surface can cause the material to become
& Seat fabric
brittle and to wear prematurely. Regular NOTE
cleaning with a soft, moist, natural fiber Strong cleaning agents such as sol-
Remove loose dirt, dust or debris with a cloth should be performed monthly, taking vents, paint thinners, window cleaner
vacuum cleaner. If the dirt is caked on the care not to soak the leather or allow water or gasoline must never be used on
fabric or hard to remove with a vacuum to penetrate the stitched seams. leather or synthetic interior materials.
cleaner, use a soft blush then vacuum it. A mild detergent suitable for cleaning
Wipe the fabric surface with a tightly woolen fabrics may be used to remove
wrung cloth and dry the seat fabric difficult dirt spots, rubbing with a soft, dry & Climate control panel, audio
thoroughly. If the fabric is still dirty, wipe cloth afterwards to restore the luster. If panel, instrument panel,
using a solution of mild soap and luke- your SUBARU is to be parked for a long console panel, switches,
warm water then dry thoroughly. time in bright sunlight, it is recommended combination meter, and other
If the stain does not come out, try a
that the seats and headrests be covered, plastic surface
or the windows shaded, to prevent fading Use a soft, damp cloth to clean the climate
commercially-available fabric cleaner. Use or shrinkage.
the cleaner on a hidden place and make control panel, audio equipment, instru-
sure it does not affect the fabric adversely. Minor surface blemishes or bald patches ment panel, center console, combination
Use the cleaner according to its instruc- may be treated with a commercial leather meter panel, and switches.
tions. spray lacquer. You will discover that each
leather seat section will develop soft folds NOTE
NOTE or wrinkles, which is characteristic of Do not use organic solvents such as
When cleaning the seat, do not use genuine leather. paint thinners or gasoline, or strong
benzine, paint thinner, or any similar cleaning agents that contain those
materials. & Synthetic leather upholstery solvents.
The synthetic leather material used on the
SUBARU may be cleaned using mild soap
– CONTINUED –
10-6 Appearance care
Replacement of wiper blades .......................... 11-31 Parking light (right-hand side) .......................... 11-40
Windshield wiper blade assembly ..................... 11-32 Front turn signal light (right-hand side) ............ 11-41
Windshield wiper blade rubber ......................... 11-32 Front fog light.................................................. 11-41
Rear window wiper blade assembly .................. 11-33 Rear combination lights ................................... 11-41
Rear window wiper blade rubber....................... 11-33 Back-up light/Tail light ..................................... 11-42
Battery............................................................... 11-35 Rear gate light ................................................. 11-43
Fuses ................................................................ 11-36 License plate light ........................................... 11-43
Main fuse .......................................................... 11-37 Dome light....................................................... 11-44
Map light ......................................................... 11-45
Installation of accessories............................... 11-38
Vanity mirror light ............................................ 11-45
Replacing bulbs ............................................... 11-38 Door step light................................................. 11-45
Headlights (models with HID headlights) ........... 11-38 Cargo area light ............................................... 11-46
Headlights (models without HID headlights) ...... 11-38
Maintenance and service 11-3
– CONTINUED –
11-4 Maintenance and service
guard against getting oil or fluids fluid on hot engine components. Engine hood
in your eyes. If something does This may cause a fire.
get in your eyes, thoroughly . Always remove the key from the
wash them out with clean water. ignition switch. When the ignition
. Do not tamper with the wiring of switch is in the “ON” position,
the SRS airbag system or seat- the cooling fan may operate
belt pretensioner system, or at- suddenly even when the engine
tempt to take its connectors is stopped.
apart, as that may activate the
system or it can render it inop-
erative. NEVER use a circuit & When you do checking or
tester for these wiring. If your servicing in the engine com-
SRS airbag or seatbelt preten- partment while the engine is
sioner needs service, consult running
your nearest SUBARU dealer.
To open the hood:
WARNING 1. If the wiper blades are lifted off the
& Before checking or servicing A running engine can be dangerous. windshield, return them to their original
in the engine compartment Keep your fingers, hands, clothing, positions.
hair and tools away from the cooling 2. Pull the hood release knob under the
WARNING fan, belts and any other moving instrument panel.
engine parts. Removing rings,
. Always stop the engine and set watches and ties is advisable.
the parking brake firmly to pre-
vent the vehicle from moving.
. Always let the engine cool down.
Engine parts become very hot
when the engine is running and
remain hot for some time after
the engine is stopped.
. Do not spill engine oil, engine
coolant, brake fluid or any other
Maintenance and service 11-5
WARNING
Always check that the hood is
properly locked before you start
driving. If it is not, it might fly open
while the vehicle is moving and
block your view, which may cause
an accident and serious bodily in-
jury.
CAUTION
When closing the hood, be careful
3. Release the secondary hood release
not to pinch your or other person’s
located under the front grille by moving the
hands or anything else in the hood.
lever toward the left.
4. Lift up the hood.
To close the hood:
1. Lower the hood to a point approxi-
mately 20 in (50 cm) from the closed
position and then give the hood a strong
push down to make it drop.
2. After closing the hood, be sure the
hood is securely locked.
If this does not close the hood, release it
from a slightly higher position. Do not push
the hood forcibly to close it. It could
deform the metal.
11-6 Maintenance and service
– CONTINUED –
11-8 Maintenance and service
8. Clean the rubber seal seating area of Oil capacity (guideline): Oil grade:
the bottom of engine and install the oil 6.7 US qt (6.3 liters, 5.5 Imp qt) ILSAC GF-4 or GF-5, which can be
filter by hand turning. Be careful not to identified with the ILSAC certification
twist or damage the seal. mark (Starburst mark)
9. Tighten the oil filter by the amount The oil quantity indicated above is only a or API classification SN or SM with the
indicated in the following table after the guideline. The necessary quantity of oil words “ENERGY CONSERVING”
seal makes contact with the bottom of depends on the quantity of oil that has
engine. been drained. The quantity of drained oil
differs slightly depending on the tempera- These recommended oil grades can be
ture of the oil and the time the oil is left identified by looking for either or both of
Oil filter color Part number Amount of ro- the following marks displayed on the oil
tation flowing out. After refilling the engine with
oil, therefore, you must use the level container.
Black 15208AA031 3/4 rotation
gauge to confirm that the level is correct.
12. Start the engine and make sure that no
CAUTION oil leaks appear around the filter’s rubber
seal and drain plug.
. Never over tighten the oil filter
because that can result in an oil 13. Run the engine until it reaches the
leak. normal operating temperature. Then stop
the engine and wait a few minutes to allow
. Thoroughly wipe off any engine the oil drain back. Check the oil level
oil that has spilled over the again and if necessary, add more engine
exhaust pipe and/or under-cover. oil.
If left unremoved, the oil could
catch fire.
& Recommended grade and
10. Reinstall the cover under the oil filter.
viscosity ILSAC Certification Mark (Starburst Mark)
– CONTINUED –
11-10 Maintenance and service
. Do not splash the engine coolant 3. Loosen the radiator cap to drain the
over painted parts. The alcohol coolant from the radiator. Then drain the
contained in the engine coolant coolant from the reserve tank. Tighten the
may damage the paint surface. drain plug securely.
WARNING
! Changing the coolant
Never attempt to remove the radia-
Always add genuine SUBARU cooling tor cap until the engine has been
system conditioner whenever the coolant shut off and has cooled down
is replaced. completely. Since the coolant is
Change the engine coolant and add under pressure, you may suffer
genuine SUBARU cooling system condi- serious burns from a spray of boil-
tioner using the following procedures ing hot coolant when the cap is
3. After refilling the reserve tank and the according to the maintenance schedule removed.
radiator, reinstall the caps and check that in the “Warranty and Maintenance Book-
the rubber gaskets inside the radiator cap let”. 4. Install the under cover.
are in the proper position. 1. Remove the under cover.
CAUTION
. Be careful not to spill engine
coolant when adding it. If coolant
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or
a fire. If engine coolant gets on
the exhaust pipe, be sure to wipe
it off.
1) Fill up to here
2. Place a proper container under the
drain plug and loosen the drain plug. 5. Slowly pour the coolant and fill up to
Maintenance and service 11-13
Air cleaner element & Replacing the air cleaner cleaner case cover.
element
Replace the air cleaner element according
WARNING to the maintenance schedule in the
Do not operate the engine with the “Warranty and Maintenance Booklet”. Un-
air cleaner element removed. The air der extremely dusty conditions, replace it
cleaner element not only filters more frequently. It is recommended that
intake air but also stops flames if you always use genuine SUBARU parts.
the engine backfires. If the air
cleaner element is not installed
when the engine backfires, you
could be burned.
6. To install the air cleaner case cover, Spark plugs Drive belts
insert the three projections on the air
cleaner case cover into the slits on the It may be difficult to replace the spark The alternator, power steering pump, and
air cleaner case. plugs. It is recommended that you have air conditioner compressor depend on
7. Install in the reverse order of removal. the spark plugs replaced by your drive belts. Satisfactory performance re-
SUBARU dealer. quires that belt tension be correct.
The spark plugs should be replaced It is unnecessary to check belt tension
according to the maintenance schedule periodically because your engine is
in the “Warranty and Maintenance Book- equipped with an automatic belt tension
let”. adjuster. However, replacement of the belt
should be done according to the main-
tenance schedule in the “Warranty and
& Recommended spark plugs Maintenance Booklet”. Consult your
SUBARU dealer for replacement.
SILFR6C11 (NGK) If a belt is loose, cracked, or worn, contact
your SUBARU dealer.
11-16 Maintenance and service
NOTE
Using any non-specified type of auto-
matic transmission fluid could result in
damage inside the transmission. When
replacing the automatic transmission
fluid, be sure to use a fluid of the types 1) Upper level
specified above. 2) Lower level
– CONTINUED –
11-18 Maintenance and service
& Recommended grade and Rear differential gear oil Power steering fluid
viscosity
Each oil manufacturer has its own base There is no rear differential gear oil level & Checking the fluid level
oils and additives. Never use different gauge. To check the rear differential gear
brands together. oil level, consult your SUBARU dealer for
inspection.
Oil grade:
API classification GL-5 & Recommended grade and
viscosity
Each oil manufacturer has its own base
oils and additives. Never use different
brands together.
Oil grade:
API classification GL-5
WARNING
Be careful not to burn yourself
because the fluid may be hot.
. Be careful not to spill power mended fluid as necessary to bring the Brake fluid
steering fluid when adding it. If level between the “MIN” and “MAX” line.
power steering fluid touches the If the fluid level is extreme low, it may & Checking the fluid level
exhaust pipe, it may cause a bad indicate possible leakage. Consult your
smell, smoke, and/or a fire. If SUBARU dealer for inspection. WARNING
power steering fluid gets on the
exhaust pipe, be sure to wipe it & Recommended fluid . Never let brake fluid contact your
off. eyes because brake fluid can be
Use one of the following types of auto- harmful to your eyes. If brake
The power steering fluid expands greatly matic transmission fluid. fluid gets in your eyes, immedi-
as its temperature rises; the fluid level ately flush them thoroughly with
SUBARU ATF
differs according to fluid temperature. clean water. For safety, when
Therefore, the reservoir tank has two IDEMITSU ATF HP performing this work, wearing
different checking ranges for hot and cold “Dexron III” Type Automatic Transmis- eye protection is advisable.
fluids. sion Fluid
. Brake fluid absorbs moisture
Check the power steering fluid level from the air. Any absorbed moist-
monthly. ure can cause a dangerous loss
1. Park the vehicle on a level surface, of braking performance.
and stop the engine. . If the vehicle requires frequent
2. Check the fluid level of the reservoir refilling, there may be a leak. If
tank. you suspect a problem, have the
When the fluid is hot after the vehicle has vehicle checked at your SUBARU
been run: Check that the oil level is dealer.
between “HOT MIN” and “HOT MAX” on
the surface of the reservoir tank.
CAUTION
When the fluid is cool before the vehicle is
run: Check that the oil level is between . When adding brake fluid, be care-
“COLD MIN” and “COLD MAX” on the ful not to allow any dirt into the
surface of the reservoir tank. reservoir.
3. If the fluid level is lower than the . Never splash the brake fluid over
applicable “MIN” line, add the recom- painted surfaces or rubber parts.
– CONTINUED –
11-20 Maintenance and service
Alcohol contained in the brake & Recommended brake fluid Brake booster
fluid may damage them.
. Be careful not to spill brake fluid FMVSS No. 116, fresh DOT 3 or DOT 4 If the brake booster does not operate as
when adding it. If brake fluid brake fluid described in the following, have it checked
touches the exhaust pipe, it may by your SUBARU dealer.
cause a bad smell, smoke, and/or 1. With the engine off, depress the brake
a fire. If brake fluid gets on the CAUTION pedal several times, applying the same
exhaust pipe, be sure to wipe it pedal force each time. The distance the
off. Never use different brands of brake pedal travels should not vary.
fluid together. Also, avoid mixing 2. With the brake pedal depressed, start
Check the fluid level monthly. DOT 3 and DOT 4 brake fluids even if the engine. The pedal should move
they are the same brand. slightly down to the floor.
3. With the brake pedal depressed, stop
the engine and keep the pedal depressed
for 30 seconds. The pedal height should
not change.
4. Start the engine again and run for
approximately 1 minute then turn it off.
Depress the brake pedal several times to
check the brake booster. The brake
booster operates properly if the pedal
stroke decreases with each depression.
Brake pedal & Checking the brake pedal Replacement of brake pad
reserve distance and lining
Check the brake pedal free play and
reserve distance according to the main-
tenance schedule in the “Warranty and CAUTION
Maintenance Booklet”.
If you continue to drive despite the
& Checking the brake pedal scraping noise from the audible
free play brake pad wear indicator, it will
result in the need for costly brake
rotor repair or replacement.
you apply the brake pedal, have the brake 1. Drive the vehicle at a speed of Parking brake stroke
pads serviced by your SUBARU dealer as approximately 22 mph (35 km/h).
soon as possible. 2. Depress the parking brake pedal
SLOWLY and GENTLY. (Pressing with a
& Breaking-in of new brake force of approximately 34 lbf [150 N, 15
pads and linings kgf].)
When replacing the brake pad or lining, 3. Drive the vehicle for approximately
use only genuine SUBARU parts. After 220 yards (200 meters) in this condition.
replacement, the new parts must be 4. Wait 5 to 10 minutes for the parking
broken in as follows. brake to cool down. Repeat this proce-
dure.
! Brake pad and lining
5. Check the parking brake stroke. If the
While maintaining a speed of 30 to 40 parking brake stroke is out of the specified
mph (50 to 65 km/h), step on the brake range, adjust it by turning the adjusting nut
pedal lightly. Repeat this five or more located on the parking brake pedal.
times. Check the parking brake stroke according
! Parking brake lining to the maintenance schedule in the
Parking brake stroke: “Warranty and Maintenance Booklet”.
5 – 6 notches / 67 lbf (300 N, 30 kgf) When the parking brake is properly
WARNING
adjusted, braking power is fully applied
A safe location and situation should by depressing the pedal five to six notches
be selected for break-in driving. gently but firmly (approximately 67 lbf [300
N, 30 kgf]). If the parking brake pedal
stroke is not within the specified range,
CAUTION have the brake system checked and
adjusted at your SUBARU dealer.
Pressing the parking brake pedal
too forcefully may cause the rear
wheels to lock. To avoid this, be
certain to press the pedal slowly
and gently.
Maintenance and service 11-23
Tires and wheels replace all four tires. the temperature in the garage and the
! Winter (snow) tires temperature outside. By way of example,
& Types of tires the following table shows the required tire
Winter tires are best suited for driving on pressures that correspond to various out-
You should be familiar with type of tires snow-covered and icy roads. However side temperatures when the temperature
present on your vehicle. winter tires do not perform as well as in the garage is 608F (15.68C).
! All season tires summer tires and all season tires on roads
other than snow-covered and icy roads. Standard tire pressures:
The factory-installed tires on your new Front: 33 psi (230 kPa, 2.3 kgf/cm2)
vehicle are all season tires. & Tire pressure monitoring Rear: 32 psi (220 kPa, 2.2 kgf/cm2)
All season tires are designed to provide system (TPMS)
an adequate measure of traction, handling Garage temperature: 608F (15.68C)
and braking performance in year-round The tire pressure monitoring system pro-
Outside Adjusted pressure
driving including snowy and icy road vides the driver with a warning message temperature [psi (kPa, kgf/cm2)]
conditions. However all season tires do by sending a signal from a sensor that is
installed in each wheel when tire pressure Front Rear
not offer as much traction performance as
winter (snow) tires in heavy or loose snow is severely low. The tire pressure monitor- 308F (−18C) 36 (250, 2.5) 35 (240, 2.4)
or on icy roads. ing system will activate only when the 38 37
vehicle is driven. Also, this system may 108F (−128C) (265, 2.65) (255, 2.55)
All season tires are identified by “ALL
SEASON” and/or “M+S” (Mud & Snow) on not react immediately to a sudden drop in
−108F
the tire sidewall. tire pressure (for example, a blow-out (−238C) 40 (280, 2.8) 39 (270, 2.7)
caused by running over a sharp object).
! Summer tires If the low tire pressure warning light
If you adjust the tire pressures in a warm
Summer tires are high-speed capability illuminates when you drive the vehicle in
garage and will then drive the vehicle in
tires best suited for highway driving under cold outside air after adjusting the tire
cold outside air, the resulting drop in tire
dry conditions. pressures in a warm garage, re-adjust the
pressures may cause the low tire pressure
Summer tires are inadequate for driving warning light to illuminate. To avoid this tire pressures using the method described
on slippery roads such as on snow- problem when adjusting the tire pressures above. Then, increase the vehicle speed
covered or icy roads. in a warm garage, inflate the tires to to at least 20 mph (32 km/h) and check to
If you drive your vehicle on snow-covered pressures higher than those shown on the see that the low tire pressure warning light
or icy roads, we strongly recommend the tire placard. Specifically, inflate them by an turns off a few minutes later. If the low tire
use of winter (snow) tires. extra 1 psi (6.9 kPa, 0.07 kgf/cm2) for pressure warning light does not turn off,
When installing winter tires, be sure to every difference of 108F (5.68C) between the tire pressure monitoring system may
– CONTINUED –
11-24 Maintenance and service
not be functioning normally. In this event, When a tire is replaced, adjustments are as soon as possible.
go to a SUBARU dealer to have the necessary to ensure continued normal When a spare tire is mounted or a
system inspected as soon as possible. operation of the tire pressure monitoring wheel rim is replaced without the
system. As with wheel replacement, there- original pressure sensor/transmitter
While the vehicle is driven, friction be- fore, you should have the work performed
tween tires and the road surface causes being transferred, the low tire pres-
by a SUBARU dealer. sure warning light will illuminate
the tires to warm up. After illumination of
the low tire pressure warning light, any steadily after blinking for approxi-
WARNING mately one minute. This indicates
increase in the tire pressures caused by
an increase in the outside air temperature If the low tire pressure warning light the TPMS is unable to monitor all
or by an increase in the temperature in the does not illuminate briefly after the four road wheels. Contact your
tires can cause the low tire pressure ignition switch is turned ON or the SUBARU dealer as soon as possible
warning light to turn off. light illuminates steadily after blink- for tire and sensor replacement and/
ing for approximately one minute, or system resetting. If the light
System resetting is necessary when the illuminates steadily after blinking
you should have your Tire Pressure
wheels are changed (for example, a for approximately one minute,
Monitoring System checked at a
switch to snow tires) and new TPMS promptly contact a SUBARU dealer
SUBARU dealer as soon as possi-
valves are installed on the newly fitted to have the system inspected.
ble.
wheels. Have this work performed by a
SUBARU dealer following wheel replace- If this light illuminates while driving,
ment. never brake suddenly and keep
driving straight ahead while gradu-
& Tire inspection
It may not be possible to install TPMS ally reducing speed. Then slowly Check on a daily basis that the tires are
valves on certain wheels that are on the pull off the road to a safe place. free from serious damage, nails, and
market. Therefore, if you change the Otherwise an accident involving stones. At the same time, check the tires
wheels (for example, a switch to snow serious vehicle damage and serious for abnormal wear.
tires), use wheels that have the same part personal injury could occur. Contact your SUBARU dealer immedi-
number as the standard-equipment ately if you find any problem.
If this light still illuminates while
wheels. Without four operational TPMS
driving after adjusting the tire pres- NOTE
valve/sensors on the wheels, the TPMS
sure, a tire may have significant
will not fully function and the warning light . When the wheels and tires strike
damage and a fast leak that causes
in the instrument panel will illuminate curbs or are subjected to harsh treat-
the tire to lose air rapidly. If you have
steadily after blinking for approximately ment as when the vehicle is driven on a
a flat tire, replace it with a spare tire
one minute. rough surface, they can suffer damage
Maintenance and service 11-25
– CONTINUED –
11-26 Maintenance and service
. Correct tire pressure (tread worn . Abnormally low tire pressure (tread . Abnormally high tire pressure (tread
evenly) worn at shoulders) worn in center)
Roadholding is good, and steering is Rolling resistance is high, so fuel con- Ride comfort is poor. Also, the tire
responsive. Rolling resistance is low, so sumption is also higher. magnifies the effects of road-surface
fuel consumption is also lower. bumps and dips, possibly resulting in
vehicle damage.
WARNING
Driving at high speeds with exces-
sively low tire pressures can cause
the tires to deform severely and to
rapidly become hot. A sharp in-
crease in temperature could cause
tread separation, and destruction of
the tires. The resulting loss of
vehicle control could lead to an
accident.
Maintenance and service 11-27
& Wheel balance & Wear indicators cause the vehicle to hydroplane.
Each wheel was correctly balanced when The resulting loss of vehicle control
your vehicle was new, but the wheels will can lead to an accident.
become unbalanced as the tires become
worn during use. Wheel imbalance causes NOTE
the steering wheel to vibrate slightly at
certain vehicle speeds and detracts from For safety, inspect the tire tread reg-
the vehicle’s straight-line stability. It can ularly and replace the tires before their
also cause steering and suspension sys- tread wear indicators become visible.
tem problems and abnormal tire wear. If
you suspect that the wheels are not & Tire rotation direction mark
correctly balanced, have them checked
and adjusted by your SUBARU dealer.
Also have them adjusted after tire repairs
and after tire rotation. 1) New tread
2) Worn tread
NOTE 3) Tread wear indicator
Loss of correct wheel alignment* Each tire incorporates a tread wear
causes the tires to wear on one side indicator, which becomes visible when
and reduces the vehicle’s running the depth of the tread grooves decreases
stability. Contact your SUBARU dealer to 0.071 in (1.8 mm). A tire must be
if you notice abnormal tire wear. replaced when the tread wear indicator
*: The suspension system is designed to hold appears as a solid band across the tread.
each wheel at a certain alignment (relative to
the other wheels and to the road) for optimum WARNING Example of tire rotation direction mark
straight-line stability and cornering perfor- 1) Front
When a tire’s tread wear indicator
mance. If the tire has the rotation direction
becomes visible, the tire is worn
beyond the acceptable limit and specification, the tire rotation direction
must be replaced immediately. With mark is placed on its sidewall.
a tire in this condition, driving at When you install a tire that has the tire
high speeds in wet weather can rotation direction mark, install the tire with
– CONTINUED –
11-28 Maintenance and service
side temperature. If the concen- Replacement of wiper blades . While removing the wiper blades
tration is inappropriate, sprayed from the wiper arms, do not
washer fluid may freeze on the Grease, wax, insects, or other materials return the wiper arms to the
windshield and obstruct your on the windshield or the wiper blade original positions. Otherwise,
view, and the fluid may freeze in results in jerky wiper operation and streak- the windshield surface may be
the reservoir tank. ing on the glass. If you cannot remove the scratched.
. State or local regulations on streaks after operating the windshield . When returning the raised wiper
volatile organic compounds may washer or if the wiper operation is jerky, arms to the original positions,
restrict the use of methanol, a clean the outer surface of the windshield carefully return the wiper arms
common windshield washer anti- (or rear window) and the wiper blades on the windshield while support-
freeze additive. Washer fluids using a sponge or soft cloth with a neutral ing them with your hands. You
containing non-methanol anti- detergent or mild-abrasive cleaner. After should not return the wiper arms
freeze agents should be used cleaning, rinse the windshield and wiper to the windshield only by the
only if they provide cold weather blades with clean water. The windshield is return spring. Otherwise, the wi-
protection without damaging clean if beads do not form when you rinse per arms may be deformed and/
your vehicle’s paint, wiper blades the windshield with water. or the windshield surface may be
or washer system. scratched.
CAUTION
. Return the passenger-side wiper
. Do not clean the wiper blades arm to its original position before
with gasoline or a solvent, such returning the driver-side wiper
as paint thinner or benzine. This arm to its original position.
will cause deterioration of the Otherwise, the passenger-side
wiper blades. wiper assembly and driver-side
wiper assembly will touch each
. When you wish to raise the
other, possibly resulting in
passenger-side wiper arm, first
scratches.
raise the driver-side wiper arm.
Otherwise, the passenger-side
If you cannot eliminate the streaking even
wiper assembly and driver-side
after following this method, replace the
wiper assembly will touch each
wiper blades using the following proce-
other, possibly resulting in
dures. Be sure to use genuine SUBARU
scratches.
wiper blade rubbers as replacements.
– CONTINUED –
11-32 Maintenance and service
1) Metal spines
3. Align the claws of the metal support 3. Pull the wiper blade assembly toward
with the grooves in the rubber and slide you to remove it from the wiper arm.
the blade rubber assembly into the metal
support until it locks. & Rear window wiper blade
rubber
1) Stopper
1. Pull out the end of the blade rubber 3. If the new blade rubber is not provided
assembly to unlock it from the plastic with two metal spines, remove the metal
support. spines from the old blade rubber and
install them in the new blade rubber.
1) Metal spines
Maintenance and service 11-35
Fuses
CAUTION
Never replace a fuse with one hav-
ing a higher rating or with material
other than a fuse because serious
damage or a fire could result.
Open the lid that is located above the The spare fuses are stored in the main
hood release knob and pull it toward you fuse box cover in the engine compart-
to remove it. ment.
Main fuse
NOTE
Contact your SUBARU dealer for the
bulb replacement of the left-hand side.
& Front turn signal light (right- 2. Remove the bulb from the socket by & Rear combination lights
hand side) pushing it and turning counterclockwise.
3. Install a new bulb.
4. Set the bulb socket into the headlight
assembly and turn it clockwise until it
locks.
NOTE
Contact your SUBARU dealer for the
bulb replacement of the left-hand side.
– CONTINUED –
11-42 Maintenance and service
the rear combination light assembly rear- & Back-up light/Tail light
ward and remove it from the vehicle.
1) Tail light
2) Back-up light
Maintenance and service 11-43
– CONTINUED –
11-44 Maintenance and service
4. Pull the bulb out of the socket. Install a 2. Turn the bulb until the flat surfaces at
new bulb. Models with Rear Seat Entertainment its ends are aligned vertically. Pull the bulb
5. Set the bulb socket into the license straight downward to remove it.
plate light assembly and turn it clockwise 3. Install a new bulb.
until it locks. 4. Reinstall the lens.
6. Reinstall the license plate light assem-
bly to the rear gate.
– CONTINUED –
11-46 Maintenance and service
& Cargo area light 3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the lens to the cargo area
light assembly.
6. Reinstall the cargo area light assembly
to the roof trim.
12
12-2 Specifications
Specifications
These specifications are subject to change without notice.
& Dimensions
in (mm)
Overall length 191.5 (4,865)
Overall width 73.9 (1,878)
Overall height Without roof rail 66.7 (1,695)
With roof rail 68.1 (1,730)
Wheel base 108.1 (2,745)
Tread Front 62.0 (1,575)
Rear 62.0 (1,575)
Ground clearance 8.3 (211)
& Engine
Engine model EZ36D
(3.6 L, DOHC, non-turbo)
Engine type Horizontally opposed, liquid cooled 6 cylinder, 4 stroke gasoline engine
Displacement cc (cu-in) 3,630 (221.5)
Bore 6 Stroke in (mm) 3.62 6 3.58 (92.0 6 91.0)
Compression ratio 10.5 : 1
Firing order 1–6–3–2–5–4
Specifications 12-3
& Capacities
Fuel tank 16.9 US gal (64 liters, 14.1 Imp gal)
Engine oil 6.7 US qt (6.3 liters, 5.5 Imp qt)
Transmission fluid 10.4 US qt (9.8 liters, 8.6 Imp qt)
Front differential gear oil 1.5 US qt (1.4 liters, 1.2 Imp qt)
Rear differential gear oil 0.8 US qt (0.8 liter, 0.7 Imp qt)
Power steering fluid 0.95 US qt (0.9 liter, 0.79 Imp qt)
Engine coolant 8.0 US qt (7.6 liters, 6.7 Imp qt)
Each quantity indicated above is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other
factors.
– CONTINUED –
12-4 Specifications
& Tires
Tire size P255/55R18 104H
Wheel size 18 6 8JJ
Pressure Front 33 psi (230 kPa, 2.3 kgf/cm2)
Rear 32 psi (220 kPa, 2.2 kgf/cm2)
Temporary spare tire Size T165/80R17
Pressure 60 psi (420 kPa, 4.2 kgf/cm2)
Wheel nut tightening torque Aluminum wheels (silver-colored) 89 lbf·ft (120 N·m, 12 kgf·m)*1*3
Chrome-finished wheels 111 lbf·ft (150 N·m, 15 kgf·m)*2*3
Temporary spare tire wheel 89 lbf·ft (120 N·m, 12 kgf·m)*1*3
*1: This torque is equivalent to applying the following load at the end of the wheel nut wrench.
When you use a wheel nut wrench of the 10.8-inch (275 mm) length: Approximately 96 to 115 lbf (43 to 52 kgf)
When you use a wheel nut wrench of the 13.2-inch (335 mm) length: Approximately 73 to 87 lbf (33 to 40 kgf)
If you have tightened the wheel nuts by yourself, have the tightening torque checked at the nearest automotive service facility as soon as possible.
*2: This torque is equivalent to applying approximately 87 to 109 lbf (40 to 49 kgf) at the end of the wheel nut wrench with a length of 13.2 inches (335
mm). If you have tightened the wheel nuts by yourself, have the tightening torque checked at the nearest automotive service facility as soon as possible.
*3: For information about the length of the wheel nut wrench and the wheel nut tightening procedure, refer to “Changing a flat tire” F9-6.
Specifications 12-5
*: The difference between right-hand camber and left-hand camber should be within 45’ or less.
12-6 Specifications
– CONTINUED –
12-8 Specifications
Bulb chart
NOTE
Lights A and B are the LED (Light Emitting Diode) type. Consult your SUBARU dealer for replacement.
– CONTINUED –
12-10 Specifications
CAUTION
Replace any bulb only with a new
bulb of the specified wattage. Using
a bulb of different wattage could
result in a fire.
12-12 Specifications
13
13-2 Consumer information and Reporting safety defects
! Construction type
Applicable construction of this tire.
For example, “TUBELESS STEEL
BELTED RADIAL” The vehicle placard is affixed to the
driver’s side B-pillar.
! Construction
The generic name of each cord
material used in the plies (both
sidewall and tread area) of this tire.
For example, “PLIES: TREAD 2
Consumer information and Reporting safety defects 13-5
sidewall rubber which, when in- . Extra load tire ing on a vehicle.
flated, bears the load. A tire designed to operate at higher . Light truck (LT) tire
. Chunking loads and higher inflation pressure A tire designated by its manufac-
The breaking away of pieces of the than the corresponding standard turer as primarily intended for use
tread or sidewall. tire. on lightweight trucks or multipur-
. Cold tire pressure . Groove pose passenger vehicles.
The pressure in a tire that has been The space between two adjacent . Load rating
driven less than 1 mile or has been tread ribs. The maximum load that a tire is
standing for three hours or more. . Innerliner rated to carry for a given inflation
. Cord The layer(s) forming the inside sur- pressure.
The strands forming the plies in the face of a tubeless tire that contains . Maximum inflation pressure
tire. the inflating medium within the tire. The maximum cold inflation pres-
. Cord separation . Innerliner separation sure to which a tire may be inflated.
The parting of cords from adjacent The parting of the innerliner from . Maximum load rating
rubber compounds. cord material in the carcass. The load rating for a tire at the
. Cracking . Intended outboard sidewall maximum permissible inflation
Any parting within the tread, side- (1) The sidewall that contains a pressure for that tire.
wall, or inner liner of the tire whitewall, bears white lettering . Maximum loaded vehicle weight
extending to cord material. or bears manufacturer, brand, The sum of:
. Curb weight and/or model name molding that (a) Curb weight
The weight of a motor vehicle with is higher or deeper than the (b) Accessory weight
standard equipment including the same molding on the other side- (c) Vehicle capacity weight
wall of the tire, or (d) Production options weight
maximum capacity of fuel, oil and . Maximum permissible inflation
(2) The outward facing sidewall
coolant, and if so equipped, air pressure
of an asymmetrical tire that has
conditioning and additional weight
a particular side that must al- The maximum cold inflation pres-
optional engine.
ways face outward when mount- sure to which a tire may be inflated.
Consumer information and Reporting safety defects 13-7
. Measuring rim . Passenger car tire sory weight, including heavy duty
The rim on which a tire is fitted for A tire intended for use on passen- brakes, ride levelers, roof rack,
physical dimension requirements. ger cars, multipurpose passenger heavy duty battery, and special
. Normal occupant weight vehicles, and trucks, that have a trim.
150 lbs (68 kg) times the number of gross vehicle weight rating (GVWR) . Radial ply tire
occupants specified in the second of 10,000 lbs (4,535 kg) or less. A pneumatic tire in which the ply
column of Table 1 that is appended . Ply cords that extend to the beads are
to the end of this section. A layer of rubber-coated parallel laid at substantially 90 degrees to
. Occupant distribution cords. the centerline of the tread.
Distribution of occupants in a vehi- . Ply separation . Recommended inflation pres-
cle as specified in the third column A parting of rubber compound sure
of Table 1 that is appended to the between adjacent plies. The cold inflation pressure recom-
end of this section. . Pneumatic tire mended by a vehicle manufacturer.
. Open splice A mechanical device made of rub- . Reinforced tire
Any parting at any junction of tread, ber, chemicals, fabric and steel or A tire designed to operate at higher
sidewall, or innerliner that extends other materials, that, when loads and at higher inflation pres-
to cord material. mounted on an automotive wheel, sures than the corresponding stan-
. Outer diameter provides the traction and contains dard tire.
The overall diameter of an inflated the gas or fluid that sustains the . Rim
new tire. load. A metal support for a tire or a tire
. Overall width . Production options weight and tube assembly upon which the
The linear distance between the The combined weight of those tire beads are seated.
exteriors of the sidewalls of an installed regular production options . Rim diameter
inflated tire, including elevations weighing over 5.1 lbs (2.3 kg) in Nominal diameter of the bead seat.
due to labeling, decorations, or excess of those standard items . Rim size designation
protective bands or ribs. which they replace, not previously Rim diameter and width.
considered in curb weight or acces-
– CONTINUED –
13-8 Consumer information and Reporting safety defects
. Rim type designation . Tread rib accessory weight, and normal oc-
The industry of manufacturer’s des- A tread section running circumfer- cupant weight (distributed in accor-
ignation for a rim by style or code. entially around a tire. dance with Table 1 that is ap-
. Rim width . Tread separation pended to the end of this section)
Nominal distance between rim Pulling away of the tread from the and dividing by 2.
flanges. tire carcass. . Wheel-holding fixture
. Section width . Treadwear indicators (TWI) The fixture used to hold the wheel
The linear distance between the The projections within the principal and tire assembly securely during
exteriors of the sidewalls of an grooves designed to give a visual testing.
inflated tire, excluding elevations indication of the degrees of wear of
due to labeling, decoration, or the tread.
protective bands. . Vehicle capacity weight
. Sidewall The rated cargo and luggage load
That portion of a tire between the plus 150 lbs (68 kg) times the
tread and bead. vehicle’s designated seating capa-
. Sidewall separation city.
The parting of the rubber com- . Vehicle maximum load on the
pound from the cord material in tire
the sidewall. Load on an individual tire that is
. Test rim determined by distributing to each
The rim on which a tire is fitted for axle its share of the maximum
testing, and it may be any rim listed loaded vehicle weight and dividing
as appropriate for use with that tire. by 2.
. Tread . Vehicle normal load on the tire
That portion of a tire that comes Load on an individual tire that is
into contact with the road. determined by distributing to each
axle its share of the curb weight,
Consumer information and Reporting safety defects 13-9
Table 1 — Occupant loading and distribution for vehicle normal load for & Tire care – maintenance and
various designated seating capacities safety practices
. Check on a daily basis that the
Designated seating Vehicle normal load, Occupant distribution in a tires are free from serious damage,
capacity, number of number of occupants normally loaded vehicle nails, and stones. At the same time,
occupants
check the tires for abnormal wear.
2 through 4 2 2 in front. . Inspect the tire tread regularly
2 in front, 1 in second and replace the tires before their
5 through 10 3 seat. tread wear indicators become visi-
2 in front, 1 in second ble. When a tire’s tread wear
11 through 15 5 seat, 1 in third seat, 1 in indicator becomes visible, the tire
fourth seat. is worn beyond the acceptable limit
2 in front, 2 in second and must be replaced immediately.
16 through 22 7 seat, 2 in third seat, 1 in With a tire in this condition, driving
fourth seat. at even low speeds in wet weather
can cause the vehicle to hydro-
plane. Possible resulting loss of
vehicle control can lead to an
accident.
– CONTINUED –
13-10 Consumer information and Reporting safety defects
. To maximize the life of each tire on your vehicle’s placard. ! Calculating total and load ca-
and ensure that the tires wear The vehicle placard also shows pacities varying seating con-
uniformly, it is best to rotate the seating capacity of your vehicle. figurations
tires every 7,500 miles (12,000 km). The total load capacity includes the Calculate the available load capa-
For information about the tire rota- total weight of driver and all pas- city as shown in the following
tion order, refer to “Tire rotation” sengers and their belongings, any examples.
F11-28. Replace any damaged or cargo, any optional equipment such
unevenly worn tires at the time of Example 1A
as a trailer hitch, roof rack or bike
rotation. After tire rotation, adjust carrier, etc., and the tongue load of
the tire pressures and make sure a trailer. Therefore cargo capacity
the wheel nuts are correctly tigh- can be calculated by the following
tened. For information about the method.
tightening torque and tightening Cargo capacity = Load limit − (total
sequence for the wheel nuts, refer weight of occupants + total weight
to “Flat tires” F9-6. of optional equipment + tongue
load of a trailer (if applicable))
& Vehicle load limit – how to
determine For information about vehicle load-
The load capacity of your vehicle is ing, refer to “Loading your vehicle”
determined by weight, not by avail- F8-11. Vehicle capacity weight of the
able cargo space. The load limit of vehicle is 1,157 lbs (525 kg), which
For information about towing capa- is indicated on the vehicle placard
your vehicle is shown on the city and weight limits, refer to
vehicle placard attached to the with the statement “The combined
“Trailer towing” F8-20. weight of occupants and cargo
driver’s side B-pillar. Locate the
statement “The combined weight should never exceed 525 kg or
of occupants and cargo should 1,157 lbs”.
never exceed XXX kg or XXX lbs”
Consumer information and Reporting safety defects 13-11
For example, if the vehicle has one Example 1B 2. Calculate the available load ca-
occupant weighing 154 lbs (70 kg) pacity.
plus cargo weighing 882 lbs (400
kg).
1. Calculate the total weight.
vehicle is 1,157 lbs (525 kg), which 2. Calculate the available load ca- 40 lbs (18 kg) now enter the same
is indicated on the vehicle placard pacity. vehicle (bringing the number of
with the statement “The combined occupants to three), and a child
weight of occupants and cargo restraint system weighing 11 lbs (5
should never exceed 525 kg or kg) is installed in the vehicle for the
1,157 lbs”. child to use, the calculations are as
follows.
For example, the vehicle has one
1. Calculate the total weight.
occupant weighing 165 lbs (75 kg)
plus cargo weighing 705 lbs (320
kg). In addition, the vehicle is fitted 3. The result of step 2 shows that a
with a trailer hitch weighing 22 lbs further 88 lbs (40 kg) of cargo can
(10 kg), to which is attached a be carried.
trailer weighing 1,764 lbs (800 kg).
10% of the trailer weight is applied Example 2B
to the trailer tongue (i.e. Tongue
load = 176 lbs (80 kg)).
1. Calculate the total weight.
4. The resulting figure equals the Uniform tire quality grading form to Federal Safety Require-
available amount of cargo and standards ments in addition to these grades.
luggage load capacity. For exam-
ple, if the “XXX” amount equals This information indicates the rela- & Treadwear
1,400 lbs (635 kg) and there will be tive performance of passenger car The treadwear grade is a compara-
five- 150 lbs (68 kg) passengers in tires in the area of treadwear, tive rating based on the wear rate of
your vehicle, the amount of avail- traction, and temperature resis- the tire when tested under con-
able cargo and luggage load capa- tance. This is to aid the consumer trolled conditions on a specified
city is 650 lbs. (1,400 − 750 (5 6 in making an informed choice in the government test course.
150) = 650 lbs). purchase of tires. For example, a tire graded 150
5. Determine the combined weight Quality grades can be found where would wear one and one-half (1-
of luggage and cargo being loaded applicable on the tire sidewall be- 1/2) times as well on the govern-
on the vehicle. That weight may not tween tread shoulder and maxi- ment course as a tire graded 100.
safely exceed the available cargo mum section width. For example: The relative performance of tires
and luggage load capacity calcu- Treadwear 200 Traction AA Tem- depends upon the actual conditions
lated in Step 4. perature A of their use, however, and may
6. If your vehicle will be towing a depart significantly from the norm
trailer, load from your trailer will be The quality grades apply to new due to variations in driving habits,
transferred to your vehicle. Consult pneumatic tires for use on passen- service practices and differences in
this manual to determine how this ger cars. However, they do not road characteristics and climate.
reduces the available cargo and apply to deep tread, winter type
luggage load capacity of your ve- snow tires, space-saver or tempor- & Traction AA, A, B, C
hicle. ary use spare tires, tires with The traction grades, from highest to
nominal rim diameters of 12 inches lowest, are AA, A, B and C. Those
or less, or to some limited produc- grades represent the tire’s ability to
tion tires. stop on wet pavement as measured
All passenger car tires must con- under controlled conditions on spe-
Consumer information and Reporting safety defects 13-15
cified government test surfaces of grade C corresponds to a level of Reporting safety defects
asphalt and concrete. A tire marked performance which all passenger (U.S.A.)
C may have poor traction perfor- car tires must meet under the
mance. Federal Motor Vehicle Safety Stan- If you believe that your vehicle has
dards No. 109. Grades B and A a defect which could cause a
WARNING represent higher levels of perfor- crash or could cause injury or
The traction grade assigned to mance on the laboratory test wheel death, you should immediately in-
this tire is based on straight- than the minimum required by law. form the National Highway Traffic
ahead braking traction tests, Safety Administration (NHTSA) in
WARNING addition to notifying Subaru of
and does not include accel-
eration, cornering, hydroplan- The temperature grade for this America, Inc.
ing, or peak traction charac- tire is established for a tire If NHTSA receives similar com-
teristics. that is properly inflated and plaints, it may open an investiga-
not overloaded. Excessive tion, and if it finds that a safety
speed, underinflation, or ex- defect exists in a group of vehi-
& Temperature A, B, C cessive loading, either sepa- cles, it may order a recall and
The temperature grades are A (the rately or in combination, can remedy campaign. However,
highest), B, and C, representing the cause heat buildup and possi- NHTSA cannot become involved
tire’s resistance to the generation of ble tire failure. in individual problems between
heat and its ability to dissipate heat you, your dealer, or Subaru of
when tested under controlled con- America, Inc. To contact NHTSA,
ditions on a specified indoor labora- you may call the Vehicle Safety
tory test wheel. Sustained high Hotline toll-free at 1-888-327-4236
temperature can cause the material (TTY: 1-800-424-9153); go to
of the tire to degenerate and reduce http://www.safercar.gov; or write
tire life, and excessive temperature
to: Administrator, NHTSA, 1200
can lead to sudden tire failure. The
New Jersey Avenue, SE, West
– CONTINUED –
13-16 Consumer information and Reporting safety defects
14
14-2 Index