Professional Documents
Culture Documents
WinOLS-Diesel-Tuning-Modules
WinOLS-Diesel-Tuning-Modules
WinOLS-Diesel-Tuning-Modules
Contents
Overview .................................................................................................................................................2
Fuel Injection Timing (Duration) / Injector Pulse Width ............................................................2
Boost Pressure / Turbo Pressure / Target Boost Pressure / Turbo Pressure Control ........2
Boost Pressure Limiter / Max Boost Pressure / Turbo Pressure Limiter ............................2
Rail Pressure ..........................................................................................................................................2
Rail Pressure Limiter ........................................................................................................................2
Start of Injection Angle (SOI) / Phase of Injection .....................................................................3
Fuel Quantity Injection / Injection Quantity / NM Conversion Table .....................................3
Drivers Wish / Driver demanded Torque / Fuel during acceleration / Torque request .....3
Torque Limiters .....................................................................................................................................3
EGR Control / EGR duty cycle ...........................................................................................................3
Smoke Limiter / Lower lambda For Smoke Limitation / Fuel Quantity Limiter ...................3
Lambda....................................................................................................................................................3
Torque request during cranking / fuel request during cranking / Starting maps ...............3
Page 1 of 3
EVC WinOLS Diesel Tuning Module 3 of 6
V1r0
WinOLS 5 Diesel Tuning Modules –
Common map sizes and names
The information in this document contains the listings of the commonly found map types
and their typical map sizes that you may come across when tuning a diesel vehicle – this
is designed to support your learning and understanding of this lesson.
Overview
Whilst there are many other combinations of map table, the information in this document
provides the details of the commonly required maps for tuning and their potential table
sizes.
Always remember to use the additional tools at your disposal to help recognise the map
and its function in the ECU file.
Checking the 3-D and 2-D views to confirm the size and shape of the map, along with
the pattern of the data.
The size of the map will help you to understand if it is a map type you are looking for
and of course, the physical values in the tables will help to further verify if you have
located the correct map.
Rail Pressure
16x20 16x16 16x15
Page 2 of 3
EVC WinOLS Diesel Tuning Module 3 of 6
V1r0
Start of Injection Angle (SOI) / Phase of Injection
19x16 19x15 16x16 16x15 10x14
6 / 8 / 10 / 13 / 14 X 8 / 10 / 13 / 14 /
/ 16 16
Torque Limiters
24x8 24x8 24x4
25x4 25x3 24x4
24x3 20x8 8x31
3x24 3x20 1x29
1x25 1x24 1x21
1x20 1x19
Lambda
16x16 16x15 16x13
Page 3 of 3
EVC WinOLS Diesel Tuning Module 3 of 6
V1r0