Professional Documents
Culture Documents
Photography
Photography
Photography
a. Panchromatic
CBRC Headquarters b. Orthochromatic
c. Infra-red
2nd Flr., Carmen Building, 881 G. Tolentino St. corner España Blvd., d. X-ray
Sampaloc, Manila 1008
WARNING: This material is protected by Copyright Laws. 13. It is placed between the emulsion and the plastic base of a film to
Unauthorized use shall be prosecuted in the full extent of the prevent whatever light that passed through the emulsion and reflected
Philippine Laws. For exclusive use of CBRC reviewees only. by the base back to the emulsion which forms a halo effect.
a. Base
1.It is the process of reduction in which exposed silver halides are b. Emulsion
reduced into metallic silver. c. Anti-halation Backing
a. Development d. Spectral Sensitivity
b. Printing
c. Reduction 14. What is the equivalent of ASA 25 in DIN Rating?
d. Crop a. DIN 18
b. DIN 15
2. An intermediate bath between the developer and the fixer. It is c. DIN 30
usually a combination of water plus acetic acid or just plain water. It d. DIN 33
function is to prevent the contamination of two chemicals.
a. Stop Bath 15. It is given to negative or non-reversal film.
b. Fixation a. Color
c. Development b. Chrome
d. Reduction c. Chloride
d. Bromide
3.It is the process of removing unexposed silver halide remaining in
the emulsion after the first stage of development of the latent image. 16. It has a slow speed and it is suited for contact printing.
a. Stop Bath a. Chloride Paper
b. Fixation b. Bromide Paper
c. Development c. Chloro-Bromide paper
d. Reduction d. Exposure Latitude
4. It is a Reducer or developing agent 17. It consists of crystals of light-sensitive compounds (silver nitrate)
a. Elon evenly distributed throughout plastic base material.
b. Hydroquinone a. Base
c. Sodium Sulfite b. Anti-halation Backing
d. A or B c. Emulsion
d. Spectral Sensitivity
5. It is use as preservative in the Development process.
a. Sodium Sulfite 18. This refers to the size of the metallic silver grains that formed
b. Hydroquinone after development of an exposed film.
c. Potassium Bromide a. Spectral Sensitivity
d. Sodium Carbonate b. Granularity
c. Emulsion Speed
6. It is use as accelerator in the chemical processes. d. Reversal Film
a. Sodium Carbonate
b. Hydroquinone 19. It refers to American Standards Association, expressed in
c. Potassium bromide arithmetical value system. The speed ratings numbers are directly
d. Sodium Bromide proportional to the sensitivity of the material.
a. DIN
7. It is a Dissolving agent in the fixer solution. b. ASA
a. Hypo/Sodium thiasulphate c. ASO
b. Hydroquinone d. ISO
c. Potassium Bromide
d. Sodium Bromide 20. A lens defect which is the inability to focus both horizontal and
vertical plane at the same time lines running different directions.
8. Which among the following chemical is use as neutralizer?
a. Boric Acid a. Chromatic Aberration
b. Acetic Acid b. Astigmatism
c. Potassium Alum c. Coma
d. A or B d. Curvature of Field
9. Which of the following is use as Hardener in the fixing solution? 21. It has a fast speed and is recommended for projection printing and
a. Potassium Alum enlarging.
b. Boric Acid a. Chloride Paper
c. Acetic Acid b. Bromide Paper
d. Potassium Alum c. Chloro-bromide Paper
d. Exposure Latitude
10.It is a picture of small object taken through a microscope and
generally has a magnification of more than 50 times. 22. It refers to the absence of all colors in the spectrum.
a. Photomicrography a. White
b. Photomacrography b. Rainbow
c. Infra- Red Photography c. Black
d. Ultra-violet Photograph d. Yellow
23. It refers to the inability to focus all the different colors of light on
film at the same time.
a. Chromatic Aberration
b. Astigmatism
c. Coma
d. Curvature of field.
26.A natural light in which the object casts a deep and uniform
shadow.
a. Bright Sunlight
b. Dull Sunlight
c. Hazy Sunlight
d. Poor Sunlight