Professional Documents
Culture Documents
NORAM65E-Series-Spec-Sheet
NORAM65E-Series-Spec-Sheet
TURBO
110 HP Cummins
114 HP Caterpillar
16,800 LBS
10' or 12' BLADE Pictured with optional equipment
Compact Grader
With Big Grader Features
53" Circle With “A” Frame Drawbar
Full Power Shift Transmission With Torque Converter
Torque Proportioning Rear Differential
• Accelerator/decelerator and hand throttle • Horn, electric • Cab, includes • Factory air conditioner
• Alternator – 100 Amp. • Hydraulic valve – 8 section – Cloth seat – air suspension • Float control valves, (3)
• Articulated frame • Implement control lever lock – Defroster fans (2) • Floodlights, (2) F & (2) R
• Back-up alarm • Light package – F & R wipers/washers • Mirrors, rearview – external, (2)
• Batteries (2) – 12 volt – Front headlights (2) – hi/lo beam – Heater, 40,000 BTU • Moldboard – 12' wide
• Controls, hydraulic – Front worklights (2) – Inside mirror • Moldboard pitch, hydraulic
– Articulation – Turn signals, stop and tail lights – Sliding rear window • Radio group
– Circle side shift • Master electrical switch – Sound suppression • Rear ripper – 75" wide, 3 shanks
– Circle turn • Mechanical parking brake – Tinted glass • Scarifier – 41" wide, 9 teeth
– Moldboard lift/lower • Muffler, horizontal under hood • Cold weather starting aid (ether) • Strobe light
– Moldboard side shift • Moldboard – 10' wide • Dozer – 8' x 2', with skid plates • 90º bank slope saddle
– Wheel lean • Moldboard pitch, manual
• Control console, adjustable • ROPS Canopy with
• Drawbar – Dome light
• Engine side panels – Floormat
• Gauges – Glove box
– Air cleaner service indicator – Grab handles
– Engine coolant temperature – Headliner
– Engine oil pressure – Inside mirror
– Fuel level – Seat belt
– Hourmeter • Seat, vinyl – deluxe air suspension
– Tachometer • Steps, right and left
– Transmission LCD message center • Tires – 15.00 x 19.5 (8PR) G2 tubeless Deluxe cab Scarifier
– Transmission oil temperature • Transport tie down group
– Voltmeter • Vandalism protection
The information contained in this brochure is intended to be of general nature only. The manufacturer may at any
time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of
the product described in this brochure. Illustrations do not necessarily show products in standard condition. The
dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate only and
are subject to variations within normal manufacturing techniques. To be sure of getting accurate, detailed and
up-to-date information, any intending buyer should contact NorAm.
Printed in the U.S.A. NS0113 Dozer blade 90º Bank slope saddle