Professional Documents
Culture Documents
AMF765snsbdbsjja ehjs sja ana
AMF765snsbdbsjja ehjs sja ana
1 2 3 2 1 2 3 4 1 2
2-in-1 Air Puri�er and Fan
Air+
7000i Series
AMF765
2
1
4 5 6 4
3
A
1
2
D A 3 5
Air+
2
PM2.5 (μg/m3)
≤12 1-10
IAI
1-3 4-6 7-9 10-12
13-35
RH
C E G
36-55
0 100%
>55 3S
℃
-9 45℃
EN User manual 1 B 6
1
© 2022 Philips Domestic Appliances Holding B.V.
All rights reserved.
3000.090.4357.1 (07/07/2022)
www.philips.com/support 1 2 3
2S
1× 7
1 2 3 1 2 1 2 1 2 3
Air+
2M
2
1
2
1
3 4 3 4 5 1 8 2
1
2
45° 90° 180° 270° 350° OFF
2
1
FYM8
60
3S
2
7S
5 6 1 2 3 1 2
1
2 30S
CR2032
0.5h 1h 2h 4h 8h OFF
2S
7 8 4 5 3 9
2
3S 3S
1
1 <15S
3S 2
4 5 6 7
E nglish
A Air outlet (front) E Filter (FYM860)
B Control panel F Back cover
C Particle sensor G Remote control
D Circulation air outlet (back)
The appliance is operating a mode that is only available through the app.
The air purifier operates quietly at a low speed. After 3 seconds, the
screen's light switches off.
The visual instructions are divided into different topics, illustrated by the following graphic icons.
EN 1
1 Please scan the QR code to get additional information online to learn more about this
product.
Make sure the appliance is unplugged from the electrical outlet before installing the filter.
If the product stays connected to the electrical outlet after turning OFF, the appliance will
operate under the previous settings when turned ON again.
Follow the app onscreen instructions to connect the product to your network.
The color of the air quality light is determined by the highest risk index from the indicators:
PM2.5 (particles smaller than 2.5 microns) and IAI (Indoor Allergen Index). IAI and Relative
Humidity (RH) levels are only available through the app.
6 With the light sensor, the control panel lights automatically change their brightness to match
with the ambient light.
7 Clean the particle sensor with a vacuum cleaner or a dry cotton swab.
You can reset your Wi-Fi connection to re-pair the appliance when your Network password
has been changed. To add a phone to the appliance, follow the instructions in the app.
Optionally, you can replace the filter before the filter replacement alert is shown on the
display panel. Within 15 seconds after power on, press and hold the and buttons for 3
seconds to reset the filter lifetime counter.
2 EN