MSDS WP600

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

MATERIAL SAFETY DATA SHEET FLOOR SCREED

General Synonyms: WP600C15, WP600C25, WP600C40

Use: Cementitious pre blended material to apply as


bonded/ unbonded/ floating levelling screeds on floors.
Main components: Ordinary Portland cement,
Crushed stone aggregates and powder
additives.

Physical Data Appearance: Odorless granular dry mix powder.


Color: Light grey to dark grey.

Stability Dry mix powder is stable.


The dry mix will solidify over period of hours when mixed
with water.
Dry mix powder absorbs moisture from air over prolonged
periods of months when exposed directly to air.

Toxicology Dust act as skin, respiratory and eye irritant.


Wet mix act as eye and skin irritant in case of contact
with it for long time.

Risk Phrases Irritating to eyes.


Irritating to respiratory system.
Irritating to skin.

Transportation Information Nonhazardous for road, air and sea freight.

Personal Protection Avoid contact with skin and eyes.


Use in well ventilated area.

Personal Safety Equipment Wear suitable protective clothing.


Wear suitable gloves.
Wear suitable goggles.
Wear suitable mask.

Safety Phrases Avoid contact with skin.


Avoid contact with eyes.
Avoid inhalation of dust and in case of contact with
eyes, wash with plenty of clean water and take
medical advice.

In case of contact with skin, wash with plenty of clean


water and take medical advice if required.
Remove all contaminated clothing.

Fire Classification Class A1 – Noncombustible.

Accidental Spillage Measures Avoid dusting and sweep up the dry mix.
Mix with water and solidified product can be used
for land filling. Wash the area with water.

Disposal Do not dispose bulk quantities in to land & water


streams. Mix with water and solidified product can
be used for land filling. Comply with local
regulations before disposal.

Technical Information's Dry density – 1.55 kg/L.


Wet density – 2.20 kg/L.
Particle size – 0-2.0 mm.
Manufacturer Armin Josef Wuensch Plaster Factory Co.
P.O.Box: 355734
Riyadh 11383
Tel Ph: 0500065799
Fax: 0112147706

The data given above is based on current knowledge and experience. The purpose of this Safety Data
Sheet is to describe the product in terms of their safety requirements. The above details do not imply any
guarantee concerning composition, properties or performance and shall not establish a legally valid
contractual relationship.

For Armin Josef Wuensch Plaster Factory Co.

Quality Controller

You might also like