Professional Documents
Culture Documents
PMWM21-063E_ASC
PMWM21-063E_ASC
PMWM21-063E_ASC
[Description]
It is found that repeating "charge after a short period of use" may result in shorter time to use the
battery pack.
The software to improve this issue (V1.10) is released. Update the applicable batteries following the
attached Update Manual.
<Note>
When fully charge the battery from the state where it is fully discharged (voltage is 11V or less), this
symptom will not occur, but updating is recommended.
TO
V1.00 V1.10
From
V1.00 OK
V1.10 OK
[Preparation]
Prepare the JIG kit and required software files for firmware update.
For details, refer to the firmware update procedure for BP-GL95B.
(BP-GL95B_UpdateManual_E.pdf)
[Confirmation / Adjustment]
Refer to the firmware update procedure for BP-GL95B(BP-GL95B_UpdateManual_E.pdf).
<NOTE>
For security reasons, it is strictly prohibited to lend or provide jig kits and required software files for
F/W updates to anyone other than Sony and ASC/ASD.
[Software History]