Professional Documents
Culture Documents
1. General
1. General
INTRODUCTION
** ON A/C ALL
1. General
A. Revision Approval
The technical content of this document is approved under the authority of the DOA ref. EASA.21J.031.
This approval does not cover the following data for which Airbus is not responsible:
- the engine data that are under the responsibility of the Engine Type Certificate holders,
- if applicable, the Customer Originated Changes (COC), which are under the responsibility of the
customers,
- the Supplemental Type Certificates (STC) data, which are under the responsibility of the STC hol
ders.
NOTE: The Electrical Standard Practices data related to Power Plant is shown in the AMM 70-71
-XX.
NOTE: For the obsolescence/interchangeability status of the tools, refer to the Tool Equipment
Manual (TEM).
NOTE: If you cannot find the data or a procedure that you need to ensure the continued airwort
hiness of the aircraft, or if you think that the information given is not complete, contact
Airbus.