Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

MONOGRAM 30" BUILT-IN

FRENCH-DOOR SINGLE OVEN


ZTSX1FPSNSS

ADA
COMPLIANT

THE MONOGRAM STATEMENT COLLECTION SCAN-TO-COOK


Edge-to-edge handles, polished stainless steel, and hand-finished Innovative and time saving, scan-to-cook technology ensures that
edges convey a sense of solidity and beauty packaged foods are always prepared correctly. A simple scan of the
barcode with a smartphone delivers consistently, delicious results
FRENCH-DOOR DESIGN
Inspired by commercial kitchen designs, the precision engineered TWIN CONVECTION WITH DIRECT AIR
chain-drive mechanism allows for one-hand opening of both Achieve beautifully cooked and delicious meals every time with this
doors at the same time expertly designed, third heating element and fan combination

LCD CONTROLS SOFT-CLOSE DOOR


Allow you to adjust oven settings with little effort An expertly engineered hinge ensures that the oven door closes
quietly and smoothly, every time
WIFI CONNECT
Perfectly in sync with a busy lifestyle, Alexa or Google Home can be 5.0 CUBIC FOOT CAPACITY
used to control an array of oven functions from both inside and Easily accommodates even the largest meals
outside the home
EXCLUSIVE SELF-CLEAN, (2 FULL-EXTENSION,
NO-PREHEAT AIR FRY 1 REGULAR) OVEN RACKS
A must-have for health-conscious cooks, the No-Preheat Air Fry Glide in and out smoothly on stainless steel ball bearings, and
mode crisps food to crunchy perfection, without using oils or butter are designed to be left in the oven during the self-clean cycle

VOICE CONTROL TEN-PASS BAKE ELEMENT


Preheat the oven and more, all without raising a finger Covers more surface area for more even baking results

PRECISION COOKING MODES TEN-PASS DUAL BROIL ELEMENT


Master new recipes and perfectly execute favorite dishes using this Evenly browns dishes of all types and sizes
ultra-smart system that automatically tracks cooking progress,
modifies temperatures and adjusts cook times SELF-CLEAN WITH STEAM CLEAN OPTION
Gives you flexible options for thorough oven cleaning

For questions about your


appliance, please call 1-800-626-2000. PAGE 1 OF 4 Product Specification Revised 1/21
OVERALL DIMENSIONS

29 3/4" (75.6)
28 1/2" (72.4)
Min cutout width
1"
(2.5)
5 1/4"
(13.4)

27 1/4"
(69.2)
Min cutout
height 12 3/4" 23 1/4"
(32.4) (58.7)

6 13/16"
(19.9)
7/16"
(1.1)
22 1/2" (57.2)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
SPECIFICATIONS
Overall Width 29 3/4" (75.6 cm)
25 13/16" (65.6)
Overall Height 28 11/16" (72.8 cm)
1 7/8" (4.7) 14 15/16" 8 3/8"
Overall Depth Including Handle 27 13/16" (70.6 cm) (38.0) (21.3)

Oven Door Clearance 16 1/4" (41.2 cm) 1 7/8"


(4.8)

Overall Oven Interior Capacity 5.0 cu. ft. (141.6 l)


Oven Interior Dimensions 25" x 17 3/8" x 20 1/4"
(W x H x D) (63.5 cm x 44.1 cm x 51.4 cm) 28 11/16"
(72.9)
Minimum Cabinet Width 30" (76.2 cm)
Minimum Cabinet Depth 24" (61.0 cm)
Minimum Base Support 220 lbs (98.8 kg)
Cutout Width 28 1/2" (72.4 cm) Min
28 5/8" (72.7 cm) Max 2 9/16" SIDE VIEW
(6.6)
Cutout Height 27 1/4" (69.2 cm) Min
27 5/16" (69.4 cm) Max 28 1/2" (72.4)
10 1/2"
Cutout Depth 23 1/2" (59.7 cm) Min (26.7)

Volts/Hertz/Amps 240/208 V AC, 60 Hz, 20A


8 3/8"
Conduit Length 48", 72" available special (21.3)
order: WB18T10398
Electrical Rating 3.4 kW at 208V
4.5 kW at 240V 14" 5/8" 5/8"
(35.6) min (1.6) (1.6)
Shipping Weight 208 lbs (95 kg) Oven Door
Side
Clearance
* Additional space will be needed for flush installation. (Both Sides)

16 1/4" TOP VIEW


ATTENTION ELECTRICIAN:
(41.3) min
Oven Door
Front
A 240/208V, 60Hz, 20 Amp circuit is required. An individual Clearance

properly grounded branch circuit or circuit breaker is required.


Hardware junction box is required for built-in product.

Dimensions in parentheses are in centimeters unless otherwise noted.


Actual product dimensions may vary due to manufacturing tolerances.

For questions about your


appliance, please call 1-800-626-2000. PAGE 2 OF 4 Product Specification Revised 1/21
ZET1FHSS
ZET1FHSS
WALL INSTALLATION INSTALLATION WITH ADVANTIUM HELPFUL TIPS
AND WARMING DRAWER
A Th
 is model is not approved for
installation below a countertop or
23231/2"
1/2"(59.7)
(59.7) min
min
cutout
cutout depth
depth in combination with a separate
cooktop. The minimum installation
E height from the floor is
16 1/4".

B Th
 is model is not approved for
27271/4"
1/4" 2"2" flush-mount installation.
(69.2)
(69.2)
(5.1)
(5.1) min
min

C B
ZET1FHSS  ased on user height
of 5'6" to 5'10"

D P
 latform must be able to support
D 220 lbs. (98.8 kg)

E D
 imensions per Advantium or
32321/2"
1/2"(82.6)
(82.6)
Microwave Oven requirements.
Recommended
Recommended and
and 2"2"
(5.1)
(5.1) min
min
16161/4"
1/4"(41.3)
(41.3) min
min
Cutout
Cutout
from
from
location
location
floor
floor
F D
 imensions per Warming Drawer
F requirements.
C

STANDARD
STANDARD STANDARDINSTALLATION
STANDARD INSTALLATION
INSTALLATION
INSTALLATION SIDEVIEW
SIDE VIEW

INSTALLATION TO ADJACENT COUNTERTOP

If Y=0.0" then X=0.0"


Otherwise,
X=Y+1.0" (2.5 cm) min
Countertop
X

TOP VIEW

For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.

For questions about your


appliance, please call 1-800-626-2000. PAGE 3 OF 4 Product Specification Revised 1/21
SIDE BY SIDE INSTALLATION HELPFUL TIPS
If both ovens are French Door models, then 30" (76.2) min.
If the second oven is a drop down door model, then 14" (35.6) min. A This model is not approved for
9 1/2" installation below a countertop or
(24.1)
in combination with a separate
5 1/4" cooktop. The minimum installation
ELEC ELEC (13.3)
height from the floor
is 16 1/4".
C
B This model is not approved for
flush-mount installation.

C J unction box location (may also be


located in adjacent cabinet.)

SIDE BY SIDE INSTALLATION


FRONT VIEW OF CUTOUTS

For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.

For questions about your


appliance, please call 1-800-626-2000. PAGE 4 OF 4 Product Specification Revised 1/21

You might also like