Professional Documents
Culture Documents
EG question
EG question
(or)
4. A cone of diameter 40mm and height 60mm is resting on HP with one of its circumferential point such that
its axis is 45° inclined to VP. Draw the projection.
5. A square pyramid base 40 mm side and axis 65 mm long has its base on H.P and all the edges of the base
are equally inclined to V.P. It is cut by a section plane perpendicular to V.P. and inclined at 45° to H.P. and
bisecting the axis. Draw its sectional top view, and the true shape of the section.
(or)
6. Draw the development of the lateral surface of the lower portion of a cylinder of diameter 50 mm and axis
70 mm. The solid is cut by a section plane inclined at 40° to H.P. and perpendicular to VP and passing
through the midpoint of the axis.
(or)
4. A cone of diameter 40mm and height 60mm is resting on HP with one of its circumferential point such that
its axis is 45° inclined to VP. Draw the projection.
5. A square pyramid base 40 mm side and axis 65 mm long has its base on H.P and all the edges of the base
are equally inclined to V.P. It is cut by a section plane perpendicular to V.P. and inclined at 45° to H.P. and
bisecting the axis. Draw its sectional top view, and the true shape of the section.
(or)
6. Draw the development of the lateral surface of the lower portion of a cylinder of diameter 50 mm and axis
70 mm. The solid is cut by a section plane inclined at 40° to H.P. and perpendicular to VP and passing
through the midpoint of the axis.