Professional Documents
Culture Documents
_e3f8a8b253d14b8f9044905458ffb57a
_e3f8a8b253d14b8f9044905458ffb57a
_e3f8a8b253d14b8f9044905458ffb57a
Parts List
A x3 B x1 C x 12 D x 12 E x1 F x1 G x1
Fan ARGB Controller Long Screw Short Screw Mainboard Signal Mainboard Signal PWM Cable
Bridge Cable Bridge Cable
(ASUS,MSI,ASROCK) (GIGABYTE)
Installation Guide
1 A 2
A
Install the fans properly onto the radiator Connect the Fans in series
3 4
G
G A
Connect the PWM
cable to mainboard.
1 B 2
Connect the ARGB controller to the Fans. Connent the ARGB controller to the SATA connector.
Mianboard SYNC installtation Guide
Connect the Mainboard Signal Bridge Cable to fan led cable
F
CAUTION E
E E E F
+5V D G
JRAINBOW
ARGB Controller
1. Light Mode:
Switch over between 7 LED modes.
Rainbow → Full light → RGB Spectrum → Off → Flow → Ripple → Pulse → Blink
2. Color Mode:
When light mode is in Full Lighted, Pulse and Blink :
Switch over 8 LED colors .
Red → Yellow → Green → Teal → Blue → White → Purple → Rainbow
3. Light Speed:
Switch over between 4 light modes.
Slow → Normal → Fast → Extreme