Professional Documents
Culture Documents
Log-FDIL
Log-FDIL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
LITHOLOGY DISCONTNUITY DATA
Frequenv
Elevation (m)
Stabilization
Fragmented
Fluid loss %
Strength Grade
Point Load
Lugeon value (Lu)
Rcovery %
(Pressure)
Angle Attitude
Barrel/Bit
Pressure (psi)
General Description
SAMPLE
Run No.
Legend
Drilling
RQD %
Roughness
Depth
Core
Core
Core
Aperture
Hole
Graphics
Joint Set
(m)
Infilling
Soil: Type, Color, Consistency, Structure, Origin Rock: REMARKS
Type
Total Joint
Grain size, Texture and Fabric, State of Weathering, State of
Joits Depth
A lteration, Strength, Shear Zone
Key for Description of Discontinuities Roughness Infilling Weathering of Rock Masses Discontinuity wall strength
1 Clean 6 Hydro-Thermals Grade Term Grade Description/Mpa
Type Aperture
STATE CODE STATE CODE
J Joint 1 Very Tight <0.10mm STATE CODE 2 Surface Staining 7 Oxides I Fresh R0 Extremely Weak 0.25-1
PLANNAR
F Fault 3 Partly Open 0.25 - 0.50mm Smooth SSm Smooth Usm Smooth PSm 4 Calcite 9 Sheared III Mogerately Weathered R2 Weak 5 - 25
B Bedding 4 Open 0.50 - 2.5mm Slickensided SSl Slickensided Usl Slickensided PSl 5 Silty Gravel/Gravely Silt 10 Aragonite IV Highly Weathered R3 Medium Strong 25 - 50
R Fracture V Very Highly Weathered R4 Strong 50 - 100
NOTES: 1. For Detailed Description of Discontinuity Parameters see ISRM Suggested Method For Quantitative Description of Discontinuities in Rock Masses VI Residual Soil R5 Very Strong 100 - 250
S Schistocity 2. In Case of Clay Filled Discontinuities, the Strength of Clay Seam should be Reprted by ISRM
O Foliation R6 Extremely Strong > 250
3. Depth wise Zones of Similar Discontinuity Characteristics should be recognized to fill Column 12