Professional Documents
Culture Documents
PLUMBING GENERAL
PLUMBING GENERAL
PLUMBING GENERAL
ACRONYM
1) ANSI – AMERICAN NATIONAL STANDARD INSTITUTE
2) ASTM – AMERICAN SOCIETY OF TESTING MATERIALS
3) UL – UNDERWRITER’S LABORATORIES, INCORPORATED
4) ISO – INTERNATIONAL STANDARD ORGANIZATION
5) PNS – PHILIPPINE NATIONAL STANDARD
6) FS – FEDERAL SPECIFICATIONS
7) IAPMO – INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
8) B&ST- BROWNE AND SHARP
9) PEX / XLPE - CROSS-NETWORK POLYETHYLENE
10) RCP – REINFORCED CONCRETE PIPE
11) IPS - IRON PIPE SIZE
12) IE – INVERT ELEVATION
13) CCIP - CENTRIFUGALLY CAST IRON PIPE
14) CS & PS – COMMERCIAL/PRODUCT STANDARDS
15) HWT – WATER HEATER
16) SDR – STANDARD DIMENSIONAL RATING
PLUMBING FEES
1. INSTALLATION OF WATER CLOSET - Php 7.00 /excess of 1 plumbing unit
2. INSTALLATION OF SHOWER HEAD - Php 2.00 /excess of 1 plumbing unit3.
INSTALLATION OF DENTAL CUSPIDOR - Php 4.00 /excess of 1 plumbing unit
PNSDW
-The code that prescribes criteria on the quality if drinking water from meteoric, surface or
underground sources is: NATIONAL STANDARDS FOR DRINKING WATER (NSDW)
1. What is the benzene limits (mg/L) in potable water according
to PNSDW of 2007? 0.01
2. What is the cyanide limits (mg/L) in potable water according
to PNSDW of 2007? 0.07
3. Minimum volume of water sample for testing as per PNSDW
of 2007? 100 ML
4) What is the mercury limits (mg/L) in potable water according to PNSDW of 2007? 0.001
5) Under what administrative order is the Philippine Standard for Drinking Water 2007? NO.
0012
ASTM CODES :
1) ASTM B43 – BRASS PIPE FOR WATER DISTRIBUTION
2) ASTM D 2846, ASTM F 441, ASTM F 442, CSA B137.6 - chlorinated polyvinyl chloride
(cPVC)
3) ASTM A 53 – GALVANIZED STEEL PIPE FOR WATER DISTRIBUTION
4) ASTM D 3309 and CSA CAN3-B137.8.6 – POLYBUTHYLENE
5) ASTM B43 OR ASTM A 74, ASTM A 888 and CISPI 301 – CAST IRON PIPE
6) ASTM D 266. ASTM D 2949 and ASTM F 891 - POLYVINYL CHLORIDE (PVC)
PLASTIC PIPE (TYPE DWV)