Professional Documents
Culture Documents
KA-1033_Datasheet
KA-1033_Datasheet
KA-1033_Datasheet
TECHNICAL SPECIFICATIONS
BAND 700 850
DOWNLINK
Passband 768 - 803MHz 859 - 890MHz
Insertion loss 0.4dB typical, 0.8dB maximum 0.45dB typical, 0.8dB maximum
Return loss 20dB typical, 18dB minimum
Maximum input power 60W (LTE/NR) 80W (WCDMA/LTE/NR)
ELECTRICAL
Impedance 50Ohms
50ohms termination (ie AISG capable device DC and AISG will not be
ANT AISG control via AISG OUT Short circuit antenna RET cable/device) available via external RET supplied to ANT 1 port. DC
port or Open circuit cable and AISG are supplied to
the AISG OUT port
AISG disabled for both
Fault or short circuit ANT1 and AISG OUT port.
ANT AISG disabled Short circuit Short circuit Note TMA continue to
present on AISG circuits
operate while DC is applied
to BTS ports
Note1: Expected current drawn <2A. If the current rises above 2A but remains below 4A, the current will continue to be monitored for a further 15 seconds. If
it remains above 2A after 15 seconds the DC/AISG will be disabled
Note 2: A set of jumper PINs has been added to the AISG OUT port to force the voltage on the AISG connector pins to remain at 0V and disable the AISG
OUT port if not being used. The jumper PINs are fitted by default at the Kaelus factory and must be removed if an external AISG cable is used.
Note 3: To re-enable the DC/AISG feed on ANT1 and/or AISG port, the TMA will need to be re-started.
ENVIRONMENTAL
For further details of environmental compliance, please contact Kaelus.
Temperature range -10ºC to +55ºC | +14°F to +131°F
Ingress protection IP67
Altitude 2,600m | 8,530ft
Lightning protection IEC61312-1, RF: ±5kA maximum (8/20us), AISG: ±2kA maximum (8/20us)
MTBF >1,000,000 hours
EMC:EN 301 489-50
Compliance ETSI EN 300 019-1-4 class 4.1
RoHS
NEBS Standard GR-487-CORE
MECHANICAL
Dimensions H x D x W 420 x 295 x160 mm | 16.5 x 11.6 x 6.3 in
Weight 20kg | 44lbs
Finish Painted, light grey (RAL 7035)
Connectors DIN 4.3-10 (F) x 4, AISG (F) x 1
Mounting Poll/wall bracket supplied with two U-bolt clamps 55-155mm diameter poles
ORDERING INFORMATION
PART NUMBER DESCRIPTION
KA-1033-2132 TWIN TMA 700/850, 2 ANT, ANT AISG