Professional Documents
Culture Documents
TR Deactivation Flowchart 1
TR Deactivation Flowchart 1
YES
-Remove the plug from the lockout assembly on the outside of each translating sleeve.
-Remove the lockout pin from the pin stowage bracket assembly on the outside of each translating sleeve.
-Clean the plug and the lockout pin.
Is the lockout pin Do a check of the rigging of the translating sleeve actuators.
correctly installed in the NO Refer to AMM TASK 78-30-00-820-010, Para. 4.C,
lockout assembly? SUBTASK 78-30-00-820-052-A.
YES
Install the plug in the pin stowage bracket assembly of each translating sleeve.
Do an operational test of the LVDTs to be sure that they operate correctly on the deactivated thrust reverser.
N_MM_783000_4_XYZ2_01_02
1 of 1 7/17/2023, 2:02 PM