Professional Documents
Culture Documents
AMP-D50MC User Manual - McLELLAND
AMP-D50MC User Manual - McLELLAND
AMP-D50MC User Manual - McLELLAND
OWNERS MANUAL
2
The AMP-D50MC is a 2-Channel digital amplifi- The powerful 50-Watt class D power module in
er designed to be used to boost audio amplifi- the AMP-D50MC is combined with the features
cation where needed, either as a standalone such as 3 audio input channels, 2 Microphone
amplifier, or as an addition to a whole space input channels, Treble/Bass/Balance adjustment,
distributed audio system in order to provide volume gain adjustment, RS232 connection and
extra amplifier power in larger rooms or space. a buffered line output that enables even more
Its space-saving 1/2-rack design allows for amplification of the same audio signal when
quick installation and gives flexibility of mixing needed. AMP-D50MC is ideal for the applications
and matching with other 1/2-rack products to including school, hospital, church, stores, restau-
save valuable equipment rack space. rant and conference system, etc.
FEATURE
* 3 selectable input sources. * Adjustable for Volume, Treble, Bass and
* One Mic or Line input channel. Balance.
* One Mic input channel. * Auto limit output power at 50W.
* RJ-45 for connecting with MAP-KBT1 or * Auto mode for Power standby.
MAP-KSP1 source keypad. * LINE OUT loops the signal to another amplifier.
* Selectable for Stereo, Mono, Bridge output * Controllable via buttons, RS232 and optional IR
mode. Remote Control.
* The volume of Line inputs will reduce
automatically when there is a signal presents
on MIC1 and MIC2.
8 7 6 5 4 3 2 1
3
1. POWER : Power on/off button button for 3 seconds change to TREBLE, and
short push to switch BASS or BALANCE, then
2. AUTO/NORMAL Switch:
rotating to adjust. After stopping adjustment,
AUTO mode : Device will enters to STAND- will return to VOL mode automatically or push
BY mode when no input signal after 15 the button for 3 seconds and return to VOL
minutes. mode.
NORMAL model : STANDBY mode disable. 5. LOCK: Operation of front panel lock
3. Output format switch: Select the output indicator, only can be controlled by enclosed
mode between STEREO, MONO, and remote controller.
BRIDGE audio output 6. SOURCE: Push to select input source.
4. SELECT: BASS, TREBLE, BALANCE and 7. LCD display: Shows the level of adjustment.
VOLUME Control.
8. IR input: 3.5mm jack for the included IR
Default model in VOL control, rotating to Receiver. The IR receiver is used to control and
adjust volume of input source. setting the amplifier by using the included
TREBLE/BASS/BALANCE adjustment, push remote controller.
7 6 5 4 2 2 1 8 12 11
1. LINE 1: Line input / RCA jack 6. MIC2: Microphone input / Screw terminal
2. LINE 2: Line input / RCA jack or Screw 7. MIC2/48V: When condenser microphone is
terminal. used for this channel and need the phantom
power, sets the switch at ON position. When
3. LINE 3: Connect optional MAP-KBT1 or dynamic microphone is used for this channel,
MAP-KSP1 keypad via CAT 5 cable sets the switch at OFF position.
* MAP-KSP1 : S/PDIF/3.5mm jack Input
8. SPEAKER OUTPUT: Speaker ouput / Screw
MAP-KBT1 : Bluetooth Receiver terminal
4. MIC1/LINE: Microphone or Line Input / 9. LINE OUT: Loop out to the additional power
Screw Terminal. amplifier.
5. MIC1/LINE Switch: Select input signal for 10. RS232: Connect to RS232 for remotely control.
MIC1/LINE connector. When condenser
microphone is used for this channel and 11. Power Socket: AC power in.
need the phantom power, sets the switch at
48V position. 12. Speaker Impedance: Select 4Ω or 8Ω accord-
ing to the connected speakers.
4
IR REMOTE
3 2 1
REFERENCE CONNECTION
CD player
MAP-1200US Amplifier
PLA2 Power Amplifier
MAP-KBT1
Mic
Power Input
CD player
PC Mic
CD player
5
TECHNICAL SPECIFICATIONS
Output power: Input Impedance (Audio): 10K
50W x 2 @4Ω THD1% RMS ( 70W MAX) Power output: AC 100~240 V 50/60Hz
50W x 2 @8Ω THD1% RMS ( 70W MAX) Power consumption: 70W(50W 1% 4Ω)
100W @8Ω THD1% RMS (Bridge Mode) RJ-45: For connecting with MAP-KBT1 or
RS-232 COMMANDS:
6
7