Professional Documents
Culture Documents
07-01-WPS
07-01-WPS
OneBase
According To ASME Code Section VIII Div.1 and IX , ED:2015
In case of confelect between Dimension on above Sketch and those on Fabricatin Drawing, those on Fabricatin Drawing Shall govern
JOINTS (QW-402)
Joint Design :
Groove Angle :
Retainers :
Thickness Range
T limits impact
POSITION (QW-405)
Positions of Groove: All Welding Progression : Uphill if vertical Position of Fillet : All
PREHEAT (QW-406)
Min. preheat Temp. :
Preheat Maintenance :
PWHT : None
T limits : None
GAS (QW-408)
Shielding
Backing
Trailing
Pulsing of current
Current
Polarity
Amps Range
Volts Range
Heat input
Tungsten Electrode Size / type
TECHNIQUE (QW-410)
Process GTAW SMAW
String / Weave
Orifice Cup Diameter (GTAW)
Initial and Interpass Cleaning
Method of back gouging
Oscillation
Multiple or Single Pass per Side
Multiple or Single Electrode
Closed to out Chamber
Manual/Automatic / Machine
electrode spacing
Peening
Use of Thermal Processes
Current
Voltage Filler Metal
Bead No. Process AMP. Range*
Range*
Heat Input J/mm
Type
Diam.(mm) Remarks
Type Polarity
Prepared By Reviewed By
Name : Name :
Title : Title :
Signature Signature
Date : Date :