Professional Documents
Culture Documents
SECTION 12 22 00 - DRAPERIES
SECTION 12 22 00 - DRAPERIES
14
064.1240.000 Interior Design Specification Riyadh, Ar Riyad
Stage 4 - Detailed Design Rev 01 KSA
SECTION 12 22 00 - DRAPERIES
PART 1 - GENERAL
1.1 SUMMARY
C. Scope Includes:
D. The Owner requires the Contractor to implement practices and procedures to meet the
project's environmental performance goals, which include compliance with the
requirements determined by the Sustainability Consultant’s design documentation
(LEED & WELL), and applicable local authority Green Building Regulation. Specific
project goals that may impact this area of work include, but are not limited to: reduced
impact of construction activities, construction waste recycling, reduction of water and
energy usage, adequate protection for storing materials, use of recycled-content
materials, use of locally manufactured materials, use of low-emitting materials, use of
materials having EPD's, and avoid use of restricted materials. The Contractor shall
ensure that the requirements related to these goals, as defined in individual
specification sections are implemented to the fullest extent. Substitutions, or other
changes to the work proposed by the Contractor or their Subcontractors, shall not be
allowed if such changes compromise the aforementioned environmental goals and
Green Building Regulation compliance.
1. Contractor shall, at all times undertake to ensure that all targeted goals are
achieved. As and when any risks arise that could compromise the achievement of
one or more of the targeted goals, the Contractor shall bring these to the attention
of the Employer's Representative immediately.
DRAPERIES 12 22 00 - 1
Copyright 2022 Gensler
Gensler 18 November 2022 Riyad Bank HQ, KAFD 1.14
064.1240.000 Interior Design Specification Riyadh, Ar Riyad
Stage 4 - Detailed Design Rev 01 KSA
C. Shop Drawings: Submit shop drawings showing locations of each drapery item,
dimensioned plans and elevations, large-scale details, attachment devices, and other
components. Plans shall be drawn at a scale of not less than (1:50). Elevations shall be
drawn at a scale of not less than (1:25). Details shall be drawn at a scale of not less
than (1:5).
A. Operation and Maintenance (O&M) Manuals: Include component list with the
manufacturer’s reference numbers, descriptions of materials and procedures
forrepairing and cleaning of finishes, and cleaning frequency.
B. Source Limitations: For draperies, obtain each color and pattern of fabric and trim
from one dye lot.
DRAPERIES 12 22 00 - 2
Copyright 2022 Gensler
Gensler 18 November 2022 Riyad Bank HQ, KAFD 1.14
064.1240.000 Interior Design Specification Riyadh, Ar Riyad
Stage 4 - Detailed Design Rev 01 KSA
B. Scheduling: Do not deliver or install draperies until after other finish work, including
painting, is complete and spaces are otherwise ready for occupancy.
PART 2 - PRODUCTS
a. Mounting: Ceiling.
b. Operation: Electrically operated drapery track system.
DRAPERIES 12 22 00 - 3
Copyright 2022 Gensler
Gensler 18 November 2022 Riyad Bank HQ, KAFD 1.14
064.1240.000 Interior Design Specification Riyadh, Ar Riyad
Stage 4 - Detailed Design Rev 01 KSA
2.2 DRAPERIES
1. Euro Systems LLC, Suite No. 239, Al Shafar Investment Building, Sheikh Zayed
Road, Al Quoz, P.O.Box: 212688, Dubai, United Arab Emirates, T:+971 4 380
7744, E: info@eurosystems.com.
B. Drapery:
1. Heading:
a. Ripplefold Pleats.
b. Heading Accessories: Woven snap tape.
B. Seams: Sew vertical seams with twin-needle sewing machine with selvage trimmed
and overlocked. Join widths so that patterns match and vertical seams lay flat and
straight without puckering. Horizontal seams are not acceptable.
C. Side Hems: Double-turned, 38-mm- wide hems consisting of three layers of fabric, and
blindstitched so that stitches are not visible on face of drapery.
D. Bottom Hems: Double-turned, 102-mm- wide hems consisting of three layers of fabric,
and weighted and blindstitched so that weights and stitches are not visible on face of
drapery.
DRAPERIES 12 22 00 - 4
Copyright 2022 Gensler
Gensler 18 November 2022 Riyad Bank HQ, KAFD 1.14
064.1240.000 Interior Design Specification Riyadh, Ar Riyad
Stage 4 - Detailed Design Rev 01 KSA
E. Linings: Equal to widths of drapery fabric and joined to drapery fabric at top by inside
invisible seam, and hand stitched at side hems and shadowed with 38-mm return of
face fabric.
PART 3 - EXECUTION
A. Install track systems according to manufacturer's written instructions, level and plumb,
and at height and location in relation to adjoining openings as indicated on Drawings.
B. Isolate metal parts of tracks and brackets from concrete, masonry, and mortar to
prevent galvanic action. Use tape or another method recommended in writing by track
manufacturer.
A. Where draperies abut overhead construction, hang draperies so that clearance between
headings and overhead construction is 6.4 mm.
B. Where draperies extend to floor, install so that bottom hems clear finished floor by not
more than 25 mm and not less than 13 mm.
3.3 ADJUSTING
A. After hanging draperies, test and adjust each track to produce unencumbered, smooth
operation.
B. Steam and dress down draperies as required to produce crease- and wrinkle-free
installation.
END OF SECTION
DRAPERIES 12 22 00 - 5
Copyright 2022 Gensler