Air TEMP 0C= Location: one bed room Enclosed (- ) Open ( )
Humidity %= Feeder No. 19 Date: 08/01/24 Dead Inspection Required Yes ( ) No ( - )
Ring Main Unit Weekly Inspection Checklist
N.B. Keep Your Safety First!!! Remark (If not what measures No. Inspection Yes No taken or should be taken?) 1. Check nameplate information correctness. 2. Inspect enclosures for proper alignment, foundation fixing and grounding. 3. Inspect all covers, panels section and doors for paint work and proper fit. 4. Check for smooth and proper movement of racking mechanisms for alignment, - - shutters, rollers, rails, and guides. 5. Check for proper alignment of the breaker primary and secondary contacts. 6. Check for correct breaker position indication. 7. Check that the control and power wiring diagram drawing document is available around the control box. 8. Other Remarks:
Inspected by: Hayelom Checked and Approved by: _Molalign________
Signature: Signature: CS Number:1702GY00091-(1-4) Location: studio Type: GIS Air TEMP 0C= Date: 08/01/24 Enclosed (- ) Open ( ) Humidity %= Feeder No. 19 Dead Inspection Required Yes ( ) No ( - )
Ring Main Unit Weekly Inspection Checklist
N.B. Keep Your Safety First!!! Remark (If not what measures No. Inspection Yes No taken or should be taken?) 1. Check nameplate information correctness. 2. Inspect enclosures for proper alignment, foundation fixing and grounding. 3. Inspect all covers, panels section and doors for paint work and proper fit. 4. Check for smooth and proper movement of racking mechanisms for alignment, - - shutters, rollers, rails, and guides. 5. Check for proper alignment of the breaker primary and secondary contacts. 6. Check for correct breaker position indication. 7. Check that the control and power wiring diagram drawing document is available around the control box. 8. Other Remarks:
Inspected: Hayelom Checked and approved by: _Molalign________
Signature: Signature: CS Number:1702GY009-(1-3) Location: Shed 38 Type: GIS Air TEMP 0C= Date: 09/01/24 Enclosed (- ) Open ( ) Humidity %= Feeder No. 20 Dead Inspection Required Yes ( ) No ( - )
Ring Main Unit Weekly Inspection Checklist
N.B. Keep Your Safety First!!! Remark (If not what measures No. Inspection Yes No taken or should be taken?) 1. Check nameplate information correctness. 2. Inspect enclosures for proper alignment, foundation fixing and grounding. 3. Inspect all covers, panels section and doors for paint work and proper fit. 4. Check for smooth and proper movement of racking mechanisms for alignment, - - shutters, rollers, rails, and guides. 5. Check for proper alignment of the breaker primary and secondary contacts. 6. Check for correct breaker position indication. 7. Check that the control and power wiring diagram drawing document is available around the control box. 8. Other Remarks:
Inspected: Hayelom checked and approved by: _Molalign________
Signature: Signature: CS Number:1702GY012-(1-4) Location: Shed 39 Type: GIS Air TEMP 0C= Date: 10/01/24 Enclosed (- ) Open ( ) Humidity %= Feeder No. 19 Dead Inspection Required Yes ( ) No ( - )
Ring Main Unit Weekly Inspection Checklist
N.B. Keep Your Safety First!!! Remark (If not what measures No. Inspection Yes No taken or should be taken?) 1. Check nameplate information correctness. 2. Inspect enclosures for proper alignment, foundation fixing and grounding. 3. Inspect all covers, panels section and doors for paint work and proper fit. 4. Check for smooth and proper movement of racking mechanisms for alignment, - - shutters, rollers, rails, and guides. 5. Check for proper alignment of the breaker primary and secondary contacts. 6. Check for correct breaker position indication. 7. Check that the control and power wiring diagram drawing document is available around the control box. 8. Other Remarks:
Inspected by: Hayelom Checked and Approved by: _Molalign________
Signature: Signature: CS Number:1702GY016-(1-4) Location: Shed 40 Type: GIS Air TEMP 0C= Enclosed (- ) Open ( ) Humidity %= Feeder No. 20 Date: 11/01/24 Dead Inspection Required Yes ( ) No ( - )
Ring Main Unit Weekly Inspection Checklist
N.B. Keep Your Safety First!!! Remark (If not what measures No. Inspection Yes No taken or should be taken?) 1. Check nameplate information correctness. 2. Inspect enclosures for proper alignment, foundation fixing and grounding. 3. Inspect all covers, panels section and doors for paint work and proper fit. 4. Check for smooth and proper movement of racking mechanisms for alignment, - - shutters, rollers, rails, and guides. 5. Check for proper alignment of the breaker primary and secondary contacts. 6. Check for correct breaker position indication. 7. Check that the control and power wiring diagram drawing document is available around the control box. 8. Other Remarks:
Inspected by: Hayelom Checked and Approved by: _Molalign________
Signature: Signature: CS Number:1702GY015-(1-3) Type: GIS Air TEMP 0C= Location: Shed 43 Enclosed (- ) Open ( ) Humidity %= Feeder No. Date: 11/01/24 Dead Inspection Required Yes ( ) No ( - )
Ring Main Unit Weekly Inspection Checklist
N.B. Keep Your Safety First!!! Remark (If not what measures No. Inspection Yes No taken or should be taken?) 1. Check nameplate information correctness. 2. Inspect enclosures for proper alignment, foundation fixing and grounding. 3. Inspect all covers, panels section and doors for paint work and proper fit. 4. Check for smooth and proper movement of racking mechanisms for alignment, - - shutters, rollers, rails, and guides. 5. Check for proper alignment of the breaker primary and secondary contacts. 6. Check for correct breaker position indication. 7. Check that the control and power wiring diagram drawing document is available around the control box. 8. Other Remarks:
Inspected by: Hayelom Checked and Approved by: _Molalign________
Signature: Signature: CS Number:1702GY014-(1-4) Type: GIS Air TEMP 0C= Location: Shed 46 Enclosed (- ) Open ( ) Humidity %= Feeder No. Date: 12/01/24 Dead Inspection Required Yes ( ) No ( - )
Ring Main Unit Weekly Inspection Checklist
N.B. Keep Your Safety First!!! Remark (If not what measures No. Inspection Yes No taken or should be taken?) 1. Check nameplate information correctness. 2. Inspect enclosures for proper alignment, foundation fixing and grounding. 3. Inspect all covers, panels section and doors for paint work and proper fit. 4. Check for smooth and proper movement of racking mechanisms for alignment, - - shutters, rollers, rails, and guides. 5. Check for proper alignment of the breaker primary and secondary contacts. 6. Check for correct breaker position indication. 7. Check that the control and power wiring diagram drawing document is available around the control box. 8. Other Remarks:
Inspected by: Hayelom Checked and Approved by: _Molalign________