Professional Documents
Culture Documents
(前道)Job Safety Analysis (Jsa) (2) (1)Repair Trolley (1)
(前道)Job Safety Analysis (Jsa) (2) (1)Repair Trolley (1)
Department / Area: Cell Production Line Contractor Supervisor: Chow Chuen Leong
Process / Service: To Repair Trolley Contact: 012-418 1819
Building / Location: M1 Cell Production
Jinko Solar Project Owner: TEO HUI XIN
Contractor Company Name: BE Precision Technology Sdn Bhd
Description of work: To Repair Trolley
Working without proper PPE. Hit by Falling Object Bodily Injury - 1. All workers must wear proper PPE
2. Setup signage at the working area
2 Install support bracket for the ducting Installing support bracket without proper PPE. Cut by sharp objects Hand injury Manual handling 1. To wear proper PPE when doing work
Using damaged tools Cut by sharp objects Bodily Injury Power tools 1. Use ELCB for all power tools in-order to prevent
trip.
2. Buddy system
3 To cut ducting for installation using Cutting ducting without using proper tools Cut by sharp objects Bodily Injury Power tools 1. Pre-checking of power tools. (Guarding, Insulation,
hand tools Physical Condition)
2. Setup signage at the working area
Working without using proper PPE. Cut by sharp objects Bodily Injury - 1. Check the physical condition of PPE, and ensure in
good condition.
2. Ensure worker use required PPE when carry out job
task.
4 Manual lifting the ducting for Incorrect lifting method Ergonimic injury Bodily Injury Manual handling 1. Arrange sufficient workers and job rotation
installation
Cut by sharp objects Hand injury - 1. All workers must wear proper PPE
2. Setup signage at the working area
Working without using proper PPE.
Hit by Falling Object Bodily Injury - 1. All workers must wear proper PPE
2. Setup signage at the working area
Standing on a unstable platform to replace the Using proper and stable standing platform when
Fall from forklift Bady injury spanner
5 Repair malfunction lighting broken bulb changing the bulb
Expose to electrical cable Electricity Electric shock NA Ensure engine is off when chaning bulb
Falling of forklift that have removed a sigle or more The location that have missing the tire is support with
Hit by falling object Body/hand injury Jack
bald tire jack
Hit by forklift if the jack that support the forklift The location that have missing the tire is support with
malfunction Hit by falling object Body/hand injury Wooden block jack as well as wooden blocks
6 Replace bald tire 1) Ensure the repair work is carried out at safe and
designated area
Hit by moving vehicle nearby during repairing Hit by moving vehicle Body injury/death Barricade tape, cone 2) Barricade the area
3) Assign a traffic controller to monitor the traffic
Hit by flying object when removing tire nuts with
powered drill Flying object Eye injury Powered drill, goggles Wear safety goggles.
JOB SAFETY ANALYSIS (JSA)