Professional Documents
Culture Documents
crutchfield
crutchfield
crutchfield
Revision 02/14/17
2005-'09
Hyundai Tucson
IMPORTANT
Before starting, compare items on your invoice with items received.
Carefully check through packaging material. If any item is missing,
please call Crutchfield Technical Support at 1-800-955-9094.
Inside...
Although reasonable attempts are made to verify the accuracy of the information contained in this MasterSheet, it is presented without
warranties or guarantees of any type due to the constantly changing nature of this type of information and running changes in vehicle
production. Any person or entity using this information does so at his or its own risk. If you find our instructions are different from your
vehicle, or if you have questions, do not continue with your installation. Contact our toll-free technical support for assistance.
*0000230250*
Page
FIGURE 5
! SAFETY CHECK
FIGURE 3
Return gear shift to park position.
1-800-955-9094
TECHNICAL SUPPORT
Metal Frame
Factory Radio
FIGURE 8 1-800-955-9094
TECHNICAL SUPPORT Copyright 2017 Crutchfield Corporation 3
023 0250 NOTES:
Please read first
• Check to make sure the Crutchfield receiver wiring
! SAFETY CHECK
1-800-955-9094
Return gear shift to park position.
TECHNICAL SUPPORT Copyright 2017 Crutchfield Corporation 4
023 0250 NOTES:
Please read first
Front Door Speakers • Instructions show factory size speakers or speakers
with adaptor brackets only. Cutting or fabrication (not
shown) will be required for other speaker sizes.
! IMPORTANT
No speaker wiring adaptor is available at this time from
Crutchfield for the tweeter location. It will be necessary to FIGURE 1 FIGURE 2
splice wires in order to install an aftermarket speaker.
“Sail” Panel
1. Pry off “sail” panel to release clips,
disconnect tweeter harness and remove panel
(Figures 1 & 2).
FIGURE 8
Door Pull
1-800-955-9094
TECHNICAL SUPPORT
Screw Cover
Continued on the next page.
Door Pull
Screw Cover
1-800-955-9094
TECHNICAL SUPPORT Copyright 2017 Crutchfield Corporation 8
023 0250
FIGURE 8
! SAFETY CHECK
1-800-955-9094 Check that wires do not interfere with window operation.
Test door lock and release operation.
TECHNICAL SUPPORT Copyright 2017 Crutchfield Corporation 9
023 0250 NOTES:
Please read first
Under-Seat Subwoofer • Instructions show factory size speakers or speakers
with adaptor brackets only. Cutting or fabrication (not
shown) will be required for other speaker sizes.
! IMPORTANT
No speaker wiring adaptor is available at this time from (1 of 2 bolts shown)
Crutchfield for this speaker location. Use spade connectors FIGURE 1 FIGURE 4
on factory wires.
1-800-955-9094
TECHNICAL SUPPORT
FIGURE 5 Bottom Panel
FIGURE 3
Copyright 2017 Crutchfield Corporation 10
023 0250
FIGURE 7
1-800-955-9094
TECHNICAL SUPPORT
Wire Splicing Guide These methods can be used to make wiring connections if no receiver or speaker wiring adaptor is available.
Factory harness is removed. Save New speaker wires are spliced into
CRIMP METHOD harness if it is to be reconnected in
the future by this method.
SOLDER METHOD factory wires behind harness.
1. Cut factory wires behind 2. Strip end of each 1. Carefully strip out a 1/2” 2. Twist wires from new
factory speaker harness. wire back 1/2”. section on each factory speaker to stripped
speaker wire behind the sections of factory wires
factory speaker harness. as shown making sure
polarity is correct.
Factory Wires
---
-- - ------
Negative Wires
Strip Out 1/2” New Wires
+
+
+ + + + + + + + + + + + + +
Positive Wires
3. Twist each positive pair of 4. Squeeze middle of cap 3. Heat wires first with 4. Wrap wiring connections
wires together and insert for tight connection. soldering iron, then with electrical tape.
in crimp cap. Repeat touch solder to
step for negative wires. 5. Connect new wires to wires for solid 5. Connect new wires to
speaker with spade connections. speaker with spade
First
connectors. connectors.
Factory Wire ---
-- - --------
Last
+
+
+ + + + + + + + + + + + + + + + + + + + +
1-800-955-9094
TECHNICAL SUPPORT Copyright 2017 Crutchfield Corporation 12