Professional Documents
Culture Documents
Civil 3 Sem Building Drawing 170736 May 2019
Civil 3 Sem Building Drawing 170736 May 2019
www.hsbteonline.com
Q.21 Draw the front elevation of Framed and of bitumen laid hot on inner side of all outer
Panelled door. walls.
Q.22 Draw the front elevation of Aluminium door with e. Flooring to be 25 mm thick cement concrete
side Glazing. (1:2:4) topping over 100 mm thick cement
concrete (1:6;18) over 100 Thick sand over
rammed earth.
SECTION-C
f. Provide doors, windows, Cup-Boards etc.
Note:Long answer type questions. Attempt any three Wherever necessary according to be
questions. 3x10=30 standard sizes.
Q.23 Draw a section of basement of Damp Proof g. Roofing to be 100 mm thick R.C.C. slab
Course in ordinary soil. covered with 20 mm thick Cement Plater
Q.24 Draw the Plan and section of quarter turn (1:3, with 2 coats of bitumen laid hot
staircase. Assume suitable data regarding this covered with 100 mm rammed earth
staircase. covered with tiles 200x100x30).
Q.25 Draw King Post Truss for 12m span. (Assume Any data not given may be assumed as per
suitable data if any) standard specifications.
Q.26 Draw the plan, and two cross sections from the
given line plan with following specifications.
a. Foundation to be 900 mm wide and 900mm
for 300 thick wall. Room 4.50mx4.00m
Room 3.50mx4.00m
b) All Walls of building = 300 mm thick.
c) Plinth height : 300 mm.
d) Provide horizontal D.P.C consisting of 40 Veranda 2.0m Wide Bath WC
mm thick cement concrete (1:2:4) with 2 1.5x2.0m
coats of bitumen laid hot. Vertical D.P.C.
cement plaster 12mm thick 1:3 with 2 coats
www.hsbteonline.com