Professional Documents
Culture Documents
brochures__DX51D - DX52D EN
brochures__DX51D - DX52D EN
_____________________________________________________________________________________________________________________________
Product description
DX51D and DX52D cold rolled galvanized coils are used for cold forming by bending and profiling. These
products are fabricated according to EN 10346. The thickness of the zinc coating varies depending on
consumers’ requirements.
Application
DX51D and DX52D galvanized coils are widely used for the production of steel structures, roofs, window
profiles, drainage and ventilation systems, roads barriers, bridges, and household appliances (cases and internal
parts).
Available dimensions
DX51D and DX52D steel products are produced in coils 0.32-2.0 mm thick and 950-1250 mm wide. Tolerances
on dimensions and shape are according to EN 10143.
The inner diameter of the coil is 600±20 mm. Coil weight is up to 15 tons.
Thickness, mm Width, mm
Notes: Dimensions and technical requirements of flat products should be agreed during the conclusion of contracts.
Sheet and strip (cut from coils) are available by agreement.
DX51D - 270-500 22
Notes. Other coating classes should be agreed during the conclusion of contracts. Requirements for forming and
weldability of finished products should be taken into consideration when ordering the weight of zinc coating.
Surface quality
Products can be delivered with a normal spangle (N) or minimized spangle (M)
Surface quality –as coated surface (А)
Surface treatment/protection: chemical passivation (C)
www.metinvestholding.com