Professional Documents
Culture Documents
P4-SY-159-L1400013_Q
P4-SY-159-L1400013_Q
P4-SY-159-L1400013_Q
P4-SY-159-L1400013
CHECKED
ACCEPTANCE DISCIPLINE
DATE
STATUS CODE ABBREVIATION
N. SURNAME SIGNATURE
C.
Q 26-July-2023 Approved for construction G. Arun Nizar Ahamed
Venkatachalapathi
C.
L 04-May-2023 Issued for Company Review G. Arun Nizar Ahamed
Venkatachalapathi
Issue Date Reason for Issue – Revision Description Prepared Checked Approved
This document contains CONFIDENTIAL and PROPRIETARY Information of Abu Dhabi Polymers Company Limited (Borouge) or any of
its Licensors. This information is not to be used, disclosed, or reproduced in whole or in part to anyone outside of Abu Dhabi
Polymers Company Limited (Borouge) and its subsidiaries, except pursuant to a written agreement with Abu Dhabi Polymers
Company Limited (Borouge).
TCM Identification Code
P4-SY-159-L1400012
QA/QC PERSONNEL
This document contains CONFIDENTIAL and PROPRIETARY Information of Abu Dhabi Polymers Company Limited (Borouge) or any of
its Licensors. This information is not to be used, disclosed, or reproduced in whole or in part to anyone outside of Abu Dhabi Polymers
Company Limited (Borouge) and its subsidiaries, except pursuant to a written agreement with Abu Dhabi Polymers Company
Limited (Borouge).
TCM Identification Code
P4-SY-159-L1400012
This document contains CONFIDENTIAL and PROPRIETARY Information of Abu Dhabi Polymers Company Limited (Borouge) or any of
its Licensors. This information is not to be used, disclosed, or reproduced in whole or in part to anyone outside of Abu Dhabi Polymers
Company Limited (Borouge) and its subsidiaries, except pursuant to a written agreement with Abu Dhabi Polymers Company
Limited (Borouge).
TCM Identification Code
P4-SY-159-L1400012
1. KANNAN GEORGE
QC INSPECTOR – PIPING
This document contains CONFIDENTIAL and PROPRIETARY Information of Abu Dhabi Polymers Company Limited (Borouge) or any of
its Licensors. This information is not to be used, disclosed, or reproduced in whole or in part to anyone outside of Abu Dhabi Polymers
Company Limited (Borouge) and its subsidiaries, except pursuant to a written agreement with Abu Dhabi Polymers Company
Limited (Borouge).
KANNAN GEORGE
QA/QC PIPING INSPECTOR
Contact: +971567135292 (Abu Dhabi)
E-Mail: kannangeorge001@gmail.com
Profile Summary
I have above “19 years’ experience” in the field of Piping inspection, material receiving inspection and
co-ordination with NDT activities. Good knowledge in interpretation of drawings, codes, specification
and QA/QC Procedures.
1
Company : NASSER S. AL-HAJRI CORPORATION
Position : QA/QC PIPING INSPECTOR
Period : From SEP 2009 to Oct 2011
Project : NATIONAL CHEVRON PHILLIPS
Professional Qualification
Language skills
Read, Write and speaks…
• English
• Tamil
• Malayalam
• Hindi
2
• Inspection Co-ordination with client inspectors.
• Ensuring all the welding consumables used are in good condition and low
hydrogen electrode are baked and held properly before use & monitoring of
welding consumables issue & return log sheet.
• Assist QA/QC manager in conducting internal quality audits.
• Ensure that Non Conformance Reports (NCR) are raised once the activities
deviated from the contract specifications.
• Preparation & review of Hydro Test packages.
• Test package Co-ordination with Client.
• Coordinating line walk and punch list preparation.
• Reinstatement & Pre-commissioning Co-ordination with Client.
• Organize Hydro test under the surveillance of clients as per client approved
procedures.
• Liaison with client inspectors for inspections of Hold and Witness Point.
• Ensuring before Spools release for painting NDE activities completed.
• Conduct the tool box meeting on site.
• Inspection the joints as per the drawing.
• Inspection & Ensuring of the storage, handling & preservation of the material.
• Carryout Inspection works after taking relevant permits from the client and follow
the appropriate HSE policies.
• Ensure that all works are carried out as per the Project Specification, Inspection &
Test Plan. Method of Statement and as per the updated IFC Drawings.
• Inspection of piping material, checking of heat treatment chart.
• QC inspection and monitoring the quality for every stage of work in progress which
comply with Clients Specification.
• Submitting daily reports to QC Manager and verify QC Inspection reports and
testing.
• Checking all the documents before submitting for inspection like, approved
material submittal copy, approved and latest revision of drawings, etc.
• Preparation and submission of final documents of the project.
• Material receiving inspection of components such as pipes, fittings, plates, flanges,
valves, stud & bolt.
• Follow up of new shipment arrival, verifying the batch certificates, delivery against
purchase order and allocating them at proper locations in the material warehouse
• The verification of documentation shall be carried out, which includes the mill test
report (MTR) against the heat number and batch number legibly stamped or printed
on the components.
• Verification of the material specification in accordance with the applicable
specification or design drawings requirement (i.e, rating, schedule, connection type
etc.).
• Ensuring that the works are according to latest drawing, specification and clients
3
Engineering standard.
• Ensure all safety measures are taken into consideration through compliance to all
Applicable Standards & Codes in Practice, adherence to governing codes and
adherence to client specification and maintained of necessary documents.
• Checking the drawing and giving instruction to the workers.
• Conduct routing inspection of completed work to endure conformity with the
standards, specification, plans and schedule.
● Shut down jobs in oil & gas plants
● Tie-in joints
Declaration:-
I hereby declare that all the above information furnished by me is true to the best of my
knowledge.
KANNAN GEORGE
4
NATIONAL INSPECTION SERVICES 3/1019, Ilnd Floor, S .B.M. Complex ,
Tanjore Main Road , Kattur,
Trichy-620 019. TN. India.
(Trai n i ng & Certificati o n Programme)
Ph : 0431-2443214
Certificate of Proficiency E-mail : info@nisinspectionzone.com
Website : www.nisinspectionzone.com
American Society for Non-Destructive Testing, Recommended Practice SNT-TC-1 A, 2006 Edition
This is to Certify .......... MR...K.ANNAN .. G .......................................................... of
......................................................... SELF. ........................................ has demonstrated his
ability successfully in both written and practical examination in accordance with ASNT written
Practice document No.SNT-TC-lA 2006 Edition, in the following discipline and level shown below.
2.,
·IC,
....--. I I' I
�
� ���111
"""5.l '•�;\�. :- '· ; . • 0 , 2,0
Examiners Signature
ONU.�
NATIONAL INSPECTION SERVICES 3/1019, Ilnd Floor, S.B.M. Complex,
Tanjore Main Road , Kattur,
Trichy-620 019. TN. India.
(Trai n i ng & Certification Programme)
Ph : 0431-2443214
Certificate of Proficiency E-mail : info@nisinspectionzone.com
Website : www.nisinspectionzone.com
American Society for Non-Destructive Testing, Recommended Practice SNT-TC-1 A, 2006 Edition
This is to Certify .......... .l.\1.k.KALt,hh,.G........................................................... of
..........................................................SJELF......................................... has demonstrated his
ability successfully in both written and practical examination in accordance with ASNT written
Practice document No.SNT-TC-lA 2006 Edition, in the following discipline and level shown below.
M ethod ........................................................
PEI TETRAN.1.' TiST!NG , _,,,,...,.,a_.
................
. · · · · · · · .. ·ge;/ io·(ii.ca ·t:; · · ·
.....Qf.x�.�.��......... . . . · ·. · · · · · .. ....
Level
Work Experience ...... ·: · .. : ............... .
Training Hours .....'.45.HQ,-i.r.$.
..... JJ................. . . . .. . . . .. ...:.___ :-
. . . ... . .�- !
o o o o
;
o • o o ••• o • o o • • • ♦ o o o o o • o o o o • • • o • •
,; � I J.
This certificate is issued to enable the employer to certify the individual as per their written practice framed to the requirements of
cJ.
SNT-TC-IA. Given this on 7.6.ll.2011 and valid up to 25.11.20l.f Renewable as per the requiremeo.ts
H,��i:,;,w �,-su, o,-.
r.t1"i"'.""t·� �\T':$i ;'.';, ·�
"'-'.lf!.�.(..°':'.i"l ,.� m
.J�:Ct.',�� 111, 2.0.2.,
Examiners Signature
NATIONAL INSPECTION SERVICES 3/1019, Ilnd Floor, S.B.M. Complex ,
Tanjore Main Road , Kattur,
Trichy-620 019. TN. India.
(Trai n i ng & Certificati o n Programme)
Ph : 0431-2443214
Certificate of Proficiency E-mail : info@nisinspectionzone.com
Website : www.nisinspectionzone.com
American Society for Non-Destructive Testing, Recommended Practice SNT-TC-1 A, 2006 Edition
This is to Certify ..........h1.R..a:..ANL1AN .. G ...... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . of
.........................................................JEL,J ......................................... has demonstrated his
ability successfully in both written and practical examination in accordance with ASNT written
Practice document No.SNT-TC-lA 2006 Edition, in the following discipline and level shown below.
Method
Level
Work Experience
Training Hours
Educational Qualification D.M.E
T his certificate is issued to enable the employer to certify the individual as per their written practice framed to the requirements of
a.
SNT-TC-IA. Given this on 21.lJ.""6-' and valid up to 21. 'a..""(H.E Renewable as per the req · e ents of SNT-Tf- lA 2006.
Examiners Signature
NATIONAL· INSPECTION SERVICES 3/1019, !Ind Floor, S.B.M. Complex,
Tanjore Main Road, Kattur,
Trichy-620 019. TN. India.
(Trai n i ng & Certification Programme)
Ph : 0431-2443214
Certificate of Proficiency E-mail : info@nisinspectionzone.com
Website : www.nisinspectionzone.com
American Society for Non-Destructive Testing, Recommended Practice SNT-TC-1 A, 2006 Edition
This is to Certify .......... lvlR.Y...AnNAl't.G ........................................................... of
......................................................... SE.,,F. ........................................ has demonstrated his
ability successfully in both written and practical examination in accordance with ASNT written
Practice document No.SNT-TC-lA 2006 Edition, in the following discipline and level shown below .
rlt rH I r 6A�EC' "'"'
Method ��: ............. .
.. . . lJJ.,J.R,�\�QNJ�.T.��·tl.�G....=�!�·.�.1.:�q �.•!��'-:'.r:vi
PERS:ORMA.Na. AJlol['
Level ··
· · · · .(( · · · · · · · · · · · · ·�· · · · · · · · · f!:riW!.!BiJ:i1"3• ·'a,tj/1·0/ g:0':2.·-ts
....9A XJ!;AR5.... .... . .� -� 2
Work Exper ience
...,.,.. i.. ...'.� ..................
Training Hours .1..
. . . . SQ HSJ.1+ r�..... . .. . . . . . . . ... ,./4 ,::--
� ::;� "\..·'- .............. .
- -:.
Educational Qualification I• _.)\."'n Nv. 2811� { •
D.M.E •
This certificate is issued to enable the employer to certify the individual as per their written practice framed to the requirements of
SNT-TC-IA. Given this on 13.'il.20i} and valid up to 12.H.201t Renewable as per the.,.re�irements of SNT-TC-1A 2006.
�i!I.SiO 0
ORY cJ.
ffl
11 JJ.o 2.- r
Examiners Signature