TDM PAM MODULATION & DEMODULATION TRAINER HTC EDU KITS
AN ISO 9001-2008 CO.
HTC 393 is a Digital Communication Trainer System to understand Technical Specifications
Techniques of Time Division Multiplexing of Pulse Amplitude Crystal : 6.144 Mhz. Modulation & Demodulation. Various functional block diagrams are Analog Channel : Four provided on-board for Teaching/Training. This Kits provides with various Test Points to visualize the signals on Oscilloscopes. Analog waveform : Sine wave of Frequencies of output of 250Hz, 500Hz, 1 KHz, and 2 Khz. Wtih Features A self contained Trainer Adjustable Amplitude of 0-4Vp-p Functional Diagrams indicated on board mimic DC Source : 0 to +5V Input-output and Test Points provided onboard Sampling Frequencies : 32 Khz/ Channel. Built in DC Power Supply Onboard Blocks : Signal generator Fully documented operating manual : Transmitter Bare board Tested Glass Epoxy SMOBC PCB is used : Receiver TDM Pulse Amplitude Modulation & Demodulation 4 Nos. of Analog Input Channel for multiplexing & : Filter De-multiplexing Low Pass Filter : 4th order Butterworth with cut off Frequency Sampling rate of 32 KHz/Channel Clock Regeneration : Using PLL Channel Identification Signal of 8 Khz. Channel Identification : 8 Khz. Clock regeneration at receiver using PLL Interconnections : 2mm Banana Socket On-board 250hz,500hz,1KHz,2Khz Sinewave Test Points : 43 Nos. generator with adjustable amplitude Power Supply : 230 V ±10%, 50/60 Hz On-board 4th order Butterworth Low pass Dimensions (mm) : W 1 90 xD 2 79 xH 95 filter with cut off frequency of 3.4khz Attractive ABS enclosures of Light weight. Weight : 2.8 Kg. approximately o Compact Size Operating Conditions : 0-40 C, 80% RH 2 Year Warranty Scope of Learning Study of Time Division Multiplexing and Demultiplexing Included Accessories : using Pulse Amplitude modulation and demodulation Study of TDM Pulse Amplitude modulation and Patch Cord : 6 nos. demodulationWith Channel Identification Information Mains Cord : 1 no. Study of TDM Pulse Amplitude modulation and Learning Material : Operating Manual demodulation using PLL method