Professional Documents
Culture Documents
Rdj10rf Instruction Manual
Rdj10rf Instruction Manual
Setting knob
Warmer / colder for selecting Programming selector Set Clock
the temperature
1. Move the vertical slider to position
Battery compartment 2. The current time setting flashes.
2 alkaline batteries type AA, 1.5 V Time setting position
3. Turn the setting knob counterclockwise -
Operating mode selector to decrease the time, or clockwise +
A1 First switch on time to increase the time.
This silder determines how the thermostat
4. When the correct time is displayed move
operates
the programming vertical l slider to any other
Automatic mode: In this position the thermostat switches at
the programmed times and temperatures
A2 First switch off time position to confirm your setting.
In this position the thermostat ignores all programmed times
A3 Second switch on time
and runs permanently at the temperature set in
In this position the thermostat ignores all programmed times
A4 Second switch off time
And runs permanently at the temperature set in
Frost protection Thermostat runs permanently at 5°c Comfort (ON) temperature setting
Energy saving (OFF) temperature
Advance button setting
Switches the operating mode from comfort to energy saving, Set the controller to RUN when all
or vice versa, until the next switching time
RUN programming is completed