The Kawapi KP-302 Call Point are
designed to offered uncompromising
quality and realiability regardless of
configurations in the aspect of installation
efficiency, flexibility and full compliance
with the latest BS 5839: PT2 and EN54: PT
11, To facilitated the compatibility to
Introduction
majority of central control equipment
manufactured —tn_ she wort. A variety of
monitoring 1psist0rs value are available by
request t6;make kesbio “Gall Point easily
adopted to most] fire alérm system world wide.
The Call Point) are-cconstructed from fire
retardants ABS engineering plastic thus
withstand high impact strength and high
resistance to heat.
Product Advantages >>
ed to meet BS 5839:
TESTING & RESETTING THE CALL POINT
‘To test the cal point, insert/slot in the special tool with “TEST
position into the slot. Rotate the tool to RESET "for resetting.
Ingut and output c
especially for lo
perfect continuity. Choices Of Contact>>
Single Pole Single Throw micro switch
(1¢,1NC and 1NO)
+ Special too! operating test facility. Two Single Pole Double Throw micro. switeh
(2C, 2NC and 2NO) with six terminal facilitated
‘ Simple but secure
safely requivement.
ly wi
Technical Specifications>>
+ Protective film on glass thus protecting the she dbx six sont
neaiae ie ass regan Current Rating 12/24 DC 54,250 VAC 34
8 ; Humidity 0.95% non-condensing
>
BroductDimensicn = = Maximum Voltage 30V DC
— Cable Termination 6 x 2.5mm?
Ingress Protection 1240
Operating Temperature 20°C To *70°C
Storage Temperature -20°C TO «70°C
Weight 153m
Additional Optional Features >>
Monitoring Resistor (Customers Specifications)
Blocking Diode,
(Distributed by
ke) VIC ENGINEERING SDN. BHD.
Selangor Dara hsan, West Malaya.
“el: (6) 05-8788 3083 (Hunting Line) Fax: 6] 02-8739 8049
E-mall: vie sb@streampceom Website: wiew.viecammy
Led Indication
Polycarbonate Transparent Protective Cover
KaWaPIi"
Quality - Innovative - Competitive