Professional Documents
Culture Documents
Egycoat 105 Zr
Egycoat 105 Zr
PRODUCT EGYCOAT 105 ZR Fully Thixotropic zircon containing water-base mould dressing.
DESCRIBTION
APPLICATIONS EGYCOAT 105 ZR is an excellent mould and core dressing for high quality casting for steel, cast iron,
copper and nickel base alloys and very effective where conditions promoting severe erosion prevail.
EGYCOAT 105 ZR cannot be applied by dipping but is ideal as a non-drip coating for
over pouring, brushing and swabbing.
Fine adjustment of EGYCOAT 105 ZR consistency by adding up to 10% water can help in minimizing
metal penetration in the mould and core surfaces.
USAGE • EGYCOAT 105 ZR is not recommended for dipping applications. The unique characteristics of
INSTRUCTION • EGYCOAT 105 ZR can optimally be utilized when it is applied as supplied, by brush, swab or spray.
Simple blowguns may not by suitable, but spray guns are perfectly satisfactory specially if the dressing
container includes an agitator. Generally, dilution with water is not recommended, but if case spraying
difficulties are encountered up to 10% water by weight can be added.
•
• EGYCOAT 105 ZR can be applied to all sand moulds with the exception of self or gas hardened silicate-
bonded sands.
•
EGYCOAT 105 ZR has excellent drying properties after applications and most methods can be used
without cracking or spelling of the dressing. It is tolerant against temperature variation during storage.
[Type text]
STANDARD EGYCOAT 105 ZR is supplied in 30 kg plastic drums.
PACKING Special packing may be offered on request
HEALTH AND Refer to the Material Safety Data Sheet for additional information. Copies of which are
SAFETY available on request.
Page 2