Professional Documents
Culture Documents
MEERA Table User Manual - 2020
MEERA Table User Manual - 2020
MEERA Table User Manual - 2020
7200.01XX
MEERA mobile operating table
V11 03 03-03-2020
7200.01XX
IFU 7200.01 EN 11
Contents
Contents
1 Introduction .............................................................................................................. 9
1.1 How to use these operating instructions............................................................................................... 9
1.1.1 Abbreviations ......................................................................................................................... 9
1.1.2 Symbols and formatting ......................................................................................................... 10
1.1.3 Definitions .............................................................................................................................. 11
1.1.3.1 Design of safety notes......................................................................................... 11
1.1.3.2 Structure of notes ................................................................................................ 11
1.1.3.3 Definition for 3-dimensional coordinate system................................................... 12
1.1.3.4 Definition of inclination and tilt............................................................................. 12
1.1.3.5 Definition of hazardous location, Zone AP-M ...................................................... 13
1.1.3.6 Definition of permitted overall load ...................................................................... 13
1.1.3.7 Definition of protrusion ........................................................................................ 13
1.1.3.8 Definition Positioning- / Transporting .................................................................. 13
1.1.3.9 Definition of usage-related restrictions ................................................................ 14
1.1.3.10 Definition of patient orientation............................................................................ 14
1.1.3.11 Definition of CENTRAL position .......................................................................... 15
1.1.3.12 Definition of applied part...................................................................................... 16
1.2 Symbols used ....................................................................................................................................... 17
1.3 Disposal ................................................................................................................................................ 20
1.3.1 Old products........................................................................................................................... 20
1.3.2 Packaging .............................................................................................................................. 20
1.3.3 Batteries and rechargeable batteries ..................................................................................... 20
1.3.4 Pads and covers .................................................................................................................... 20
1.3.5 Used electrical devices .......................................................................................................... 20
1.4 Overview............................................................................................................................................... 21
1.4.1 Meera OR table with optional accessories............................................................................. 21
1.4.2 Hand controls......................................................................................................................... 22
1.5 Basic requirements ............................................................................................................................... 23
1.5.1 Use in accordance with the intended purpose ....................................................................... 23
1.5.2 Applicable standards.............................................................................................................. 23
1.5.3 MEERA OR table (7200.01XX).............................................................................................. 23
1.5.3.1 Intended purpose MEERA operating table (7200.01XX)..................................... 23
1.5.3.2 Variants ............................................................................................................... 24
1.5.4 Control devices, optional........................................................................................................ 24
1.5.5 Product features..................................................................................................................... 24
1.5.5.1 Essential performance......................................................................................... 24
1.5.5.2 Latex-free materials............................................................................................. 24
1.5.6 Reportable event.................................................................................................................... 24
2 Safety notes.............................................................................................................. 25
2.1 General safety notes ............................................................................................................................ 25
2.2 Safety notes for the OR table ............................................................................................................... 27
2.3 Safety notes regarding the use of accessories..................................................................................... 29
7200.01XX
IFU 7200.01 EN 11 3 / 150
Contents
7200.01XX
4 / 150 IFU 7200.01 EN 11
Contents
7200.01XX
IFU 7200.01 EN 11 5 / 150
Contents
7200.01XX
6 / 150 IFU 7200.01 EN 11
Contents
7200.01XX
IFU 7200.01 EN 11 7 / 150
Contents
Index.......................................................................................................................... 146
7200.01XX
8 / 150 IFU 7200.01 EN 11
Introduction
How to use these operating instructions 1
1 Introduction
1.1.1 Abbreviations
EC European Community
EMC Electromagnetic compatibility
EN European standard
EEC European Economic Community
HD Harmonization document
HF High Frequency
IEC International Electrotechnical Commission
INT Intermittent
IP International Protection (type of protection against ingress of solid bodies
and liquids)
IPS Internal Power Source
IR Infrared
ISO International Organization for Standardization
LED Light-Emitting Diode
MDD Medical Devices Act
OR table Operating table
PUR Polyurethane integral foam
RF Radio frequency
SELV Safety Extra Low Voltage
SFC Soft Foam Core (special foam core)
SN Serial no.
UL Underwriters Laboratories Inc.
UPS Uninterrupted Power Supply
7200.01XX
IFU 7200.01 EN 11 9 / 150
Introduction
1 How to use these operating instructions
Symbol Meaning
1. Instructions to follow / list with numbered steps
2.
Result of an action
● Numbered steps / List entry / precondition
Reference to other pages within this document
[...] Key / Module / Mode
bold Menu / on-screen button
[italics] Field to be filled in
1122.33XX Order number with different variants (XX)
Tab. 1: Symbols and formatting
7200.01XX
10 / 150 IFU 7200.01 EN 11
Introduction
How to use these operating instructions 1
1.1.3 Definitions
7200.01XX
IFU 7200.01 EN 11 11 / 150
Introduction
1 How to use these operating instructions
7200.01XX
12 / 150 IFU 7200.01 EN 11
Introduction
How to use these operating instructions 1
Positioning
Positioning refers to the process of moving the mobile operating table with a patient and within
the operating room.
Transporting
Transporting refers to the process of moving the mobile operating table without a patient in the
operating room.
7200.01XX
IFU 7200.01 EN 11 13 / 150
Introduction
1 How to use these operating instructions
WARN IN G !
Risk of injury!
Incorrectly adjusted patient orientation may cause adjustment of the OR
table in a direction that was not intended.
Check the correct patient orientation prior to making any adjustments.
The patient orientation is indicated in the status bar on the display on the hand
control.
The patient orientation is based on the position of the patient on the table compared to the OR
table base.
7200.01XX
14 / 150 IFU 7200.01 EN 11
Introduction
How to use these operating instructions 1
With an overall load of 250 kg, the OR table may only be used if the OR table is in the CENTRAL
position: The longitudinal shift of the OR table is lifted and the centre table top bar 1 is above
the column 2 .
The table top stops at the CENTRAL position during a longitudinal shift. depending on the OR
table used, the longitudinal shift is then automatically continued or must be continued by pressing
the button once again.
7200.01XX
IFU 7200.01 EN 11 15 / 150
Introduction
1 How to use these operating instructions
7200.01XX
16 / 150 IFU 7200.01 EN 11
Introduction
Symbols used 1
Symbols Labelling
Labelling of products developed and marketed in accordance with relevant
European legal provisions.
Tab. 4: Symbols
7200.01XX
IFU 7200.01 EN 11 17 / 150
Introduction
1 Symbols used
Symbols Labelling
Labelling of devices with an applied part of Type B in accordance with the IEC
60601-1 standard.
Level of protection against electric shock.
Tab. 4: Symbols
7200.01XX
18 / 150 IFU 7200.01 EN 11
Introduction
Symbols used 1
Symbols Labelling
Labelling in accordance with the ISO 15223-1 standard.
Symbol for "Humidity limitation".
Tab. 4: Symbols
7200.01XX
IFU 7200.01 EN 11 19 / 150
Introduction
1 Disposal
1.3 Disposal
1.3.2 Packaging
The packing materials are made of materials compatible with the environment. The packing ma-
terial may be disposed of by Getinge on request.
ENVI RO NMEN T
Defective rechargeable batteries must be recycled in accordance with guideline
2006/66/EC.
Defective rechargeable batteries may not be opened, disposed of in household
waste, burned or thrown in water.
Defective rechargeable batteries should be returned to local collection points.
7200.01XX
20 / 150 IFU 7200.01 EN 11
Introduction
Overview 1
1.4 Overview
5 6
1 2 3 4
9 8
10
12
11
13
14
1 Head rest (1130.64A0/C0/D0/F0/G0), op- 8 REVERSE mounting point (leg plate mount-
tional ing point)
2 Head rest mounting point 9 Side rail
3 Extension plate (1131.31BC/FC), optional 10 Infrared receiver
4 NORMAL mounting point (back plate mount- 11 Socket for corded control device (corded
ing point) control device, foot switch)
5 Back plate 12 Override control panel
6 Seat plate 13 OR table base
7 Leg plate (1133.53BC/FC), optional 14 Mains connection
7200.01XX
IFU 7200.01 EN 11 21 / 150
Introduction
1 Overview
1 2
3
7
5
7200.01XX
22 / 150 IFU 7200.01 EN 11
Introduction
Basic requirements 1
Accessories
Accessories or combinations of accessories may only be used as and when indicated in these in-
structions for use.
Other accessories, combinations of accessories or consumables may only be used if they are de-
signed specifically for the use in question and will not adversely affect either performance fea-
tures or safety requirements.
7200.01XX
IFU 7200.01 EN 11 23 / 150
Introduction
1 Basic requirements
1.5.3.2 Variants
The product is available in the following versions:
• 7200.01B0
with SFC pad, without autodrive, EU side rail variant
• 7200.01B2
with SFC pad, with autodrive, EU side rail variant
• 7200.01F0
with SFC pad, without autodrive, US side rail variant
• 7200.01F2
with SFC pad, with autodrive, US side rail variant
7200.01XX
24 / 150 IFU 7200.01 EN 11
Safety notes
General safety notes 2
2 Safety notes
DA NG ER !
Potentially fatal!
Risk caused by unauthorised modifications.
Modifications at the product are not permitted.
DA NG ER !
Potentially fatal!
Risk posed to the patient's vital functions due to incorrect positioning.
Position the patient correctly and keep under permanent observation.
WARN ING !
Risk of injury!
Improper patient positioning may cause health damage (e. g. decubitus).
Position the patient correctly and keep under constant observation.
WARN ING !
Risk of injury!
Faulty or defective products may result in injuries.
• Before use, check the proper working order and fully functional state of the
product.
• Stop using faulty or defective products and inform the Getinge representative.
WARN ING !
Risk of injury!
Getinge products may be used only when lubricated.
Lubricate Getinge products at regular intervals.
WARN ING !
Risk of burns!
The use of high-frequency devices, defibrillators and defibrillator monitors
exposes the patient to burn risks due to contact with the metal components
in the product or accessories and/or as a result of resting on wet drapes or
electrically conductive padding.
Avoid any contact between the patient and metal components; never use damp or
wet surgical drapes.
Be absolutely sure to comply with the manufacturers instructions for use!
WARN ING !
Risk of injury!
Magnetic fields with a magnitude greater than 0.5 mT may influence the func-
tionality of the product.
Never use the product within the 0.5 mT field.
WARN ING !
Risk of injury!
Functional restrictions to the product may be caused as a result of service
and maintenance work.
Do not carry out service and maintenance work to the product during an operation.
7200.01XX
IFU 7200.01 EN 11 25 / 150
Safety notes
2 General safety notes
WARN IN G !
Risk of injury!
If the patient is not secured, particularly when adjusting/moving, the patient
and/or their extremities may slip in an uncontrolled manner.
Always secure the patient using suitable aids (e.g. straps) and maintain continuous
observation.
WARN IN G !
Risk of injury!
When adjusting, moving or storing the OR table / table top, the staff, the pa-
tient and the accessories are exposed to pinching and shearing hazards, par-
ticularly in the area around the joints at the head rest, back and leg plates.
Always ensure that no one can be subjected to pinching or shearing action or in-
jured in any other way and that the accessories do not collide with any nearby ob-
jects.
WARN IN G !
Risk of injury!
When adjusting and moving the OR table, the table top or the accessories,
collisions may occur with the patient, between the individual products or
parts pointing downwards.
During the adjustment procedures, always pay attention to the OR table and ac-
cessories and avoid collisions. Ensure that tubes, cables and drapes are not
trapped.
WARN IN G !
Risk of injury!
If locking elements (eccentric levers, handle screws, locks etc.) are open, the
product/accessory can be moved.
Before opening the locking elements, hold the individual items firmly. After every
adjustment procedure, ensure that all locking elements are closed.
WARN IN G !
Risk of injury!
Products / accessories not attached properly may loosen and cause injuries.
Ensure that products / accessories are mounted correctly and that the securing
elements (handle screws, catches, levers, etc.) are closed and firmly tightened,
also ensure that moving parts are correctly secured.
7200.01XX
26 / 150 IFU 7200.01 EN 11
Safety notes
Safety notes for the OR table 2
DA NG ER !
Risk of explosion!
When connected to the power supply the OR table is not authorised for use
in explosion prone AP-M areas.
An explosion could occur when using disinfectants or cleaning agents con-
taining alcohol, or flammable anaesthetics which are blended with air, oxy-
gen or nitrous oxide.
When operating on the mains supply, never use disinfectants, cleaning agents con-
taining alcohol, or flammable anaesthetics which are blended with air, oxygen or ni-
trous oxide!
DA NG ER !
Potentially fatal!
Electrical shock caused by increased leakage currents.
The patient may not touch the components that have not been defined as applied
part.
WARN ING !
Risk of injury due to material failure!
Loading may not exceed the permissible 454 kg total.
WARN ING !
Risk of infection!
If the operating table is used in areas with varying hygienic requirements,
there is a risk of infection.
Treat the operating table in accordance with the hygiene guideline and the instruc-
tions given in the chapter "Cleaning and disinfection".
WARN ING !
Risk of injury due to the operating table tipping!
If the OR table is not locked during patient transfer, the OR table may tip.
Always lock the OR table prior to transferring the patient [LOCK].
WARN ING !
Risk of injury caused by tipping of OR table!
The OR table may tip over if the patient is transferred over the head side of
the OR table.
Always transfer the patient to the OR table from the side.
WARN ING !
Risk of tilt!
The mobile operating table may tilt when crossing thresholds.
Do not cross thresholds with the mobile operating table.
WARN ING !
Risk of tipping!
If the patient is positioned incorrectly, the OR table may tip over.
Observe the prescribed patient orientation.
Do not position the patient with their torso on the leg plates.
7200.01XX
IFU 7200.01 EN 11 27 / 150
Safety notes
2 Safety notes for the OR table
WARN IN G !
Risk of injury due to the OR table tipping!
As of an overall load of the OR table of 250 kg, do not extend the swivel castors
[UNLOCK] and do not move the OR table.
WARN IN G !
Risk of injury!
Park the mobile operating table on level ground and secure with the [LOCK] func-
tion before each application and after each movement.
WARN IN G !
Risk of injury!
The OR table must be immobilised when a patient is being operated upon.
WARN IN G !
Risk of injury!
Whenever the product is mounted and adjusted, there is a danger of pinching
and shearing to the staff, patient and accessories.
Always ensure that no one can be subjected to pinching or shearing action or in-
jured in any other way and that the accessories do not collide with any nearby ob-
jects.
WARN IN G !
Risk of injury!
When setting down the OR table, there is a risk of crushing and shearing to
the feet or objects.
Before putting down the OR table, make sure there are no objects located under
the OR table base. When lowering the OR table, keep sufficient distance to the OR
table base.
CA UTIO N !
Property damage!
When tilting or sloping the table top or when articulating the leg or back plate, en-
sure that the table top, leg or back plate do not collide with either the column or the
operating table base.
CA UTIO N !
Property damage!
Any objects left on the base of the OR table will damage the casing as it
moves.
Do not put any objects on the OR table base.
CA UTIO N !
Property damages caused as a result of collision when moving/adjusting the
mobile operating table!
Remove potential hindrances before moving / adjusting the mobile operating table
and avoid collisions.
7200.01XX
28 / 150 IFU 7200.01 EN 11
Safety notes
Safety notes regarding the use of accessories 2
DA NG ER !
Potentially fatal!
Patient may be endangered as a result of incorrect use.
Follow the instructions for use for all accessories.
WARN ING !
Risk of injury!
Accessories that are not approved by Maquet for this product, as well as ac-
cessories from other manufacturers, may cause injuries.
Only use Maquet accessories that have been approved for the product.
Accessories made by other manufacturers may only be used after obtaining written
permission from Maquet.
WARN ING !
Risk of injury due to material failure or tipping of the OR table!
The accessories mounted to the OR table may not exceed the maximum pro-
jection.
Accessories may be used within the permissible projection [8 Page 116] and tak-
ing into account the total load. Please observe these specifications when position-
ing the patient.
WARN ING !
Risk of injury due to material failure!
The side rail accessory weight may not exceed 20 kg.
The maximum permissible overall load is reduced in accordance with the weight of
the attached accessories. Do not use accessories with higher weights.
CA UTI ON !
Property damage!
Side rail accessories with long lever arms may damage the product.
Do not use accessories with long lever arms.
CA UTI ON !
Property damage!
If accessories attached to the side rail protrude over the sides of the side rail
in the joint area, the accessory may collide with the table top when the joint
is adjusted.
When mounting the accessories, make sure that the accessories do not protrude
over the sides of the side rail in the joint area.
7200.01XX
IFU 7200.01 EN 11 29 / 150
Safety notes
2 Safety notes regarding service
DA NG ER !
Potentially fatal!
Electric shock!
Before opening the housing: Separate the product from mains voltage.
DA NG ER !
Potentially fatal!
The OR table may only be commissioned by a Getinge authorised service techni-
cian.
DA NG ER !
Potentially fatal!
The inspection of the OR table may only be carried out by qualified personnel who
ensure that the safety checks are carried out properly based on their training,
knowledge and experience gained through practical activities.
Technical information for carrying out the inspection is available from Getinge on
request.
WARN IN G !
Risk of injury!
Improper assembly, installation, expansion, adjustment, modification, re-
placement of hard-wired mains connections, maintenance and repair by un-
trained service personnel.
Assembly, installation, expansion, adjustment, modification, replacement of hard-
wired power cords, maintenance and repair may only be performed by Getinge-au-
thorised service technicians.
WARN IN G !
Risk of injury!
Functional restrictions to the product may be caused as a result of service
and maintenance work.
Do not carry out service and maintenance work to the product during an operation.
CA UTIO N !
Property damage!
If original Getinge spare parts are not used, the OR table may emit more interfer-
ence or be less immune to interference.
7200.01XX
30 / 150 IFU 7200.01 EN 11
Safety notes
Safety notes regarding padding 2
DA NG ER !
The patient may slip off the OR table if the SFC pad is not secured properly
to the surface.
Do not use SFC pads for which the loop tape does not match up with the hook tape
on the product.
Only mount SFC pads to the product that have been approved for use with the
product.
DA NG ER !
The patient may slip off the OR table if the SFC pad is not secured properly.
Worn or wet loop tapes do not provide the SFC pad with hold on the product.
When attaching the SFC pad, check to ensure that it is properly secured.
WARN ING !
Health risk!
For health reasons, the pads must be covered with drapes.
CA UTI ON !
Improper use can cause property damage!
Use both hands to remove the padding.
CA UTI ON !
Property damage!
The pad can be damaged.
Do not place pointed or sharp objects on the pad.
Do not place the pad on pointed or sharp-edged surfaces nor pull over such.
CA UTI ON !
Property damage!
Pad may be deformed as a result of improper storage!
Pad should only be stored lying down and at room temperature.
7200.01XX
IFU 7200.01 EN 11 31 / 150
Safety notes
2 Safety notes EMC
WARN IN G !
Hazard of injury!
Emission of electromagnetic signals of electrical units that are located near
the product or directly attached to the
product may have a negative impact on the functions of the product.
Do not place other electrical units near the product or directly at or on the product.
If this cannot be avoided, the product and the electrical units must be monitored
and checked for functional problems.
WARN IN G !
Hazard of injury!
Emission of electromagnetic signals by mobile RF communication appli-
ances (e.g. Mobile phones and transceivers) that are located near the product
may have a negative impact on the functions of the product.
Ensure that RF communication units (including cable-connected control panels and
the connection cables) are placed at a distance of at least 30 cm to the product.
WARN IN G !
Risk of injury!
In the vicinity of the product, accessories or cables that have not been spe-
cified or supplied by Getinge may, by way of reinforced electromagnetic radi-
ation or reduced electromagnetic resistance, influence the functions of the
product.
Only use cables supplied or specified by Getinge for use with this product.
Do not use any other accessories or cables not specified by Getinge.
7200.01XX
32 / 150 IFU 7200.01 EN 11
Initial operation
Storage 3
3 Initial operation
3.1 Storage
• Packaged OR table components may be stored under the named environmental conditions
for up to 15 weeks [8 Page 135]. In order to prevent a rechargeable battery defect, the bat-
tery must be recharged after this time has passed.
• When transporting and storing, do not drop the OR table, lay it down, or place it upside down.
• When transporting and storing, protect the OR table from moisture.
• If a battery-operated device is to be stored or transported for longer than 4 weeks, the battery
must be recharged before using.
• Observe the notes on the packaging.
NO TE
Conduction by way of conductive pad to the metal parts of the OR table is de-
signed to provide protection against electro-static charging. The OR table is con-
nected via the equipotential bonding connection to the equipotential bonding of the
operating room.
7200.01XX
IFU 7200.01 EN 11 33 / 150
Initial operation
3 Connecting the service interface
DA NG ER !
Risk of explosion caused by sparks!
When plugging and unplugging the plug to the service interface, there is a
risk of explosion caused by sparks.
The plug may not be plugged into or removed from the service interface during OR
operation.
WARN IN G !
Risk of injury!
Risk of stumbling as a result of loosely laid cables.
Fix the cable properly when laying.
CA UTIO N !
Property damage!
The cable of the control device may be damaged during adjustment proced-
ures.
Make sure that the cable is not crushed, trapped or damaged in any other way.
7200.01XX
34 / 150 IFU 7200.01 EN 11
Initial operation
Connecting the service interface 3
7200.01XX
IFU 7200.01 EN 11 35 / 150
Initial operation
3 IR code
3.5 IR code
WARN IN G !
Risk of injury caused by unintentional movement of the OR table!
If two OR tables within a product group have the same IR code, the operation
with the control device may result in unintentional movement of the second
OR table.
Ensure that IR codes are assigned only once within a product group.
The OR table and control device must be set to the same IR code. The IR code has two charac-
ters and is made up of the numbers 0–9 and the letters A–F. The factory set IR code for the con-
trol device is [0 0]. For this reason, this IR code may never be used as the IR code. If multiple OR
tables of the same product group are used on the same floor, you must ensure that these OR
tables do not use the same IR code.
The following products are summarised into product groups in order to ensure fault-free parallel
operation:
• Operating table system 1120, BETAMAQUET 1140
• OR tables HEIDELBERGER 1130, BETASTAR 1131.01/02, 1211 (gynaecology/urology),
1223 (ENT/head), ORTHOSTAR 1420, ORTHOSTAR II 1425, ENDOSTAR 1532/1533
• Patient transfer units 1952, 1954, 1973, 1974
• ALPHAMAQUET 1150 operating table system
• OTESUS 1160 operating table system
• MAGNUS 1180 operating table system
• Operating table system AWIGS / VIWAS
• OR tables BETACLASSIC 1118.01, ALPHACLASSIC 1118.02/03, ALPHACLASSIC PRO
1118.06
• OR table BETASTAR 1131.12
• OR tables ALPHASTAR 1132.11, ALPHASTAR PLUS 1132.13, ALPHASTAR PRO
1132.21/22
• ALPHASTAR TOP 1132.17 OR table
• ALPHAMAXX 1133 OR table
• YUNO 1433 OR table
• OP-Tisch MEERA CL 7000, MEERA ST 7100, MEERA 7200
7200.01XX
36 / 150 IFU 7200.01 EN 11
Initial operation
Venting the hydraulic oil 3
Code 1: Code 2:
1. Set the IR code for the OR table in the [Service] menu of the corded hand control .
2. Set the IR code for the IR remote control in the [Service] menu of the IR remote control .
3. Perform a functional test [8 Page 37].
7200.01XX
IFU 7200.01 EN 11 37 / 150
Hand controls and functions
4 Overview of control devices
7200.01XX
38 / 150 IFU 7200.01 EN 11
Hand controls and functions
Mounting the control device to the side rail 4
CA UTI ON !
Property damage!
A control unit attached to the side rail can slip off the side rail when the table
top is adjusted or cause collisions with the OR table or other accessories.
Remove the control device from the side rail before adjusting the table top.
1
2
7200.01XX
IFU 7200.01 EN 11 39 / 150
Hand controls and functions
4 Override control panel
2 3 4 5 6 7 8 9 10 11
UP
1 12
DOWN
13
L-SHIFT
TILT TILT
ON DOWN
19 18 17 16 15 14
7200.01XX
40 / 150 IFU 7200.01 EN 11
Hand controls and functions
Corded hand controls 4
CA UTI ON !
Property damage!
The cable of the control device may be damaged during adjustment proced-
ures.
Make sure that the cable is not crushed, trapped or damaged in any other way.
The control device sockets for the cable control unit and foot switch are located on the upper
column cladding.
7200.01XX
IFU 7200.01 EN 11 41 / 150
Hand controls and functions
4 Corded hand controls
NO TE
The control function "operating table lock " cannot be cancelled with the foot
switch.
The foot switch (1009.81J0/J1/J2) is connected to the column [8 Page 41]. Rocker switches 1
to 4 have the same functions for all versions of the foot switch. Rocker switches 5 and 6 have
different functions.
Rocker switches 1 to 4
1. Table top up
2. Table top down
3. Reverse Trendelenburg (inclination foot
down)
4. Trendelenburg (inclination head down)
Rocker switch 5
• Foot switch version (1009.81J0):
Back plate up
• Foot switch version (1009.81J1):
1 Lateral tilt left
2
3 • Foot switch version (1009.81J2):
4
5 Leg plate up
6
Rocker switch 6
• Foot switch version (1009.81J0):
Back plate down
Fig. 15: Foot switch
• Foot switch version (1009.81J1):
Lateral tilt right
• Foot switch version (1009.81J2):
Leg plate down
7200.01XX
42 / 150 IFU 7200.01 EN 11
Hand controls and functions
Universal control device (1009.25A0) 4
NO TE
The graphics in these instructions for use show the available functions of the
touchscreen user interfaces. Depending on the OR table being operated, there
may be differences between the user interface described here and the actual user
interface.
7200.01XX
IFU 7200.01 EN 11 43 / 150
Hand controls and functions
4 Universal control device (1009.25A0)
Acknowledgement tone
▪ The acknowledgement tone is emitted
once, when a button is pressed.
Quick acoustic signal (4 acoustic signals
per second)
▪ 4 quick acoustic signals will sound if a
button is not pressed correctly. Then the
control device will switch off.
Tab. 5: Acoustic signals
NO TE
Buttons light up for active functions.
7200.01XX
44 / 150 IFU 7200.01 EN 11
Hand controls and functions
Adjustment functions 4
NO TE
If a patient is on the OR table:Secure the patient prior to moving / adjusting the OR
table.
7200.01XX
IFU 7200.01 EN 11 45 / 150
Hand controls and functions
4 Adjustment functions
7200.01XX
46 / 150 IFU 7200.01 EN 11
Hand controls and functions
Adjustment functions 4
Prerequisites:
• The patient is not lying on the OR table.
• The OR table has been set to the NOR-
1 MAL patient orientation.
1. Press the [Magenta up] button 1 and
move the leg plates to the uppermost posi-
tion.
2. Press the [Magenta up] button 1 in con-
2
junction with the [0-position] button 2 and
hold for at least 10 seconds.
Ø The balancing process is executed and
can be recognised both by the audible
cracking sound and the small visual
motions of the leg plates.
Fig. 20: Balancing the leg plate Ø The balancing process is complete
when the operating note End position
achieved! is shown on the display.
3. If necessary, the balancing process may
be repeated after 5 seconds.
7200.01XX
IFU 7200.01 EN 11 47 / 150
Hand controls and functions
4 Adjustment functions
WARN IN G !
Risk of injury!
If the patient is not secured during positioning, when adjusting the OR table
or when positioning the patient (particularly when the inclination and/or tilt
features are used), then the patient could slip off the table top in an uncon-
trolled manner or their legs and arms may hang down.
Always secure the patient using suitable aids (e.g. straps) and maintain continuous
observation.
7200.01XX
48 / 150 IFU 7200.01 EN 11
Hand controls and functions
Adjustment functions 4
WARN ING !
Risk of injury!
If the patient is not secured, particularly when adjusting/moving, the patient
and/or their extremities may slip in an uncontrolled manner.
Always secure the patient using suitable aids (e.g. straps) and maintain continuous
observation.
7200.01XX
IFU 7200.01 EN 11 49 / 150
Hand controls and functions
4 Adjustment functions
NO TE
The longitudinal shift of the table top is stopped for approximately 0.5 seconds
once the CENTRAL position is reached and a short acoustic signal sounds. Then
the lateral shift will be continued past the centre position.
NO TE
The longitudinal shift can slow down or stop at a high inclination and simultan-
eously high overall load.
If necessary reduce the inclination in order to carry out longitudinal shift.
7200.01XX
50 / 150 IFU 7200.01 EN 11
Hand controls and functions
Adjustment functions 4
WARN ING !
Risk of injury!
When aligning the leg plate and especially when using knee crutches, the pa-
tient may be injured.
Check the patient's position and support when aligning the leg plate and adapt it, if
necessary.
NO TE
The manual adjustment functions of the accessories (head and leg plates) will not
be equalised.
1. Press the [zero-position] button and hold it as long as you wish to execute this function.
7200.01XX
IFU 7200.01 EN 11 51 / 150
Hand controls and functions
4 Operating menu
Prerequisites:
• OR table or table top adjustment functions
are locked [8 Page 68].
NO TE
The battery charge level of the control device is displayed in the status bar.
The battery charge level of the currently connected OR table is displayed in the
main window below the OR table graphic.
2
OR01-14 The start display on the touchscreen is divided
1 into different areas with different icons:
PATIENT POSITIONS MENU
3 4 5 1 Status bar area [8 Page 53]
6
2 Connection active
7 3 Display of the name of the operating table and
IR code of the connected operating table
4 External power supply of the control device
5 Battery symbol of the control device
6 Navigation bar or operating bar
7 Mainscreen area
8 External power supply of the operating table
with mobile/independently manoeuvrable
column
8 9 9 Battery symbol of the operating table with mo-
bile/independently manoeuvrable column
PATIENT
10 ORIENTATION 10 Control bar area (optional)
7200.01XX
52 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
Symbol Meaning
control device receives signal from the operating table.
The battery charge level of the control unit is in the range of approx. 83 %. The
battery charge capacity is sufficient.
The battery charge level of the control unit is in the range of approx. 66 %. The
battery charge capacity is sufficient.
The battery charge level of the control unit is in the range of approx. 50 %. The
battery charge capacity is sufficient for one surgery.
The battery charge level of the control unit is in the range of approx. 33 %. The
battery must be charged soon.
The battery charge level of the control unit is in the range of approx. 17 %. The
battery must be charged soon.
Battery of the control device is nearly fully charged. The battery must be charged.
7200.01XX
IFU 7200.01 EN 11 53 / 150
Hand controls and functions
4 Operating menu
4 5 6
4 View IR code
7200.01XX
54 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
OR01-14 Prerequisites:
BACK • The OR Table Connection menu is open.
Last connections
Ø Known operating tables are listed and
the menu item Connect to new OR
14 - OR-01
table is displayed.
15 - OR-02 2. Touch the Connect to new OR table but-
ton 1 .
Ø The window for entering the IR code
appears.
8 9 A B
C D E F
7200.01XX
IFU 7200.01 EN 11 55 / 150
Hand controls and functions
4 Operating menu
OR01-14 Prerequisites:
BACK • The OR Table Connection menu is
OR TABLE CONNECTION
opened.
1. Touch the Connect to OR table button.
Connect to new OR table
Last connections
Ø Known operating tables are listed and
the menu item Connect to new OR
14 - OR-01
table is displayed.
15 - OR-02 2. Touch already known operating table from
the list.
Ø Operating table is connected.
Ø The OR Table Connection menu is
opened.
OR01-14 Prerequisites:
CANCEL OK • The OR Table Connection menu is
1
opened.
OR TABLE NAME
Enter OR table name 1. Touch the Rename OR table button.
OR-01:
Ø Window with operating table name and
virtual keyboard is displayed.
q w e r t z u i o p 2. Enter the name of the operating table.
3. Touch the OK button 1 .
a s d f g h j k l
Ø Operating table has been renamed.
y x c v b n m
123 ...
7200.01XX
56 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
OR01-14 Prerequisites:
CANCEL • The OR Table Connection menu is
opened.
Disconnect from OR table
1. Touch the Disconnect from OR table
Remote connected to
button.
OR-01 14
IR code: 14 Ø Window with connected table and asso-
ciated IR code is displayed.
2. Touch the DISCONNECT button 1 .
Ø Operating table is disconnected.
1
DISCONNECT
OR01-14 Prerequisites:
BACK • The OR Table Connection menu is
opened.
View IR code
1. Touch the View IR code button.
Remote connected to
OR-01 14
Ø Window with connected table and asso-
IR code: 14 ciated IR code is displayed.
7200.01XX
IFU 7200.01 EN 11 57 / 150
Hand controls and functions
4 Operating menu
NO TE
The control device is equipped with a sensor for automatic brightness control on
the right above the touchscreen. Depending on the ambient brightness, the illumin-
ation of the touchscreen and the keyboard is adjusted.
OR01-14 Prerequisites:
CANCEL OK • The Device Settings menu is open.
DEVICE SETTINGS 1. Touch the slider and move it to the right to
increase the brightness, or move it to the
Brightness
left to reduce the brightness.
Language English
2. Touch the OK button.
Reset Ø Brightness is set.
Log files
Date / Time
System information
Sleep Mode
OR01-14 Prerequisites:
1
CANCEL OK • The Device Settings menu is open.
LANGUAGE 1. Touch the Language button.
English Ø A window with all available languages
is displayed.
Deutsch
2. Touch the desired language.
Ø The status display next to the selected
language lights orange.
3. Touch the OK button 1 .
Ø The Device Settings menu is dis-
played.
4. Touch the OK button.
Ø The selected language is set.
Fig. 35: Set the language
7200.01XX
58 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
OR01-14 Prerequisites:
CANCEL OK • The Device Settings menu is open.
DEVICE SETTINGS 1. Touch the Reset button 1 .
Brightness Ø Window with query is shown.
Language English
2. Touch the OK button.
Date / Time
System information
Sleep Mode
7200.01XX
IFU 7200.01 EN 11 59 / 150
Hand controls and functions
4 Operating menu
OR01-14 Prerequisites:
BACK • The Device Settings menu is open.
SYSTEM INFORMATION 1. Touch the System information button.
7200.01XX
60 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
NO TE
Regardless of the set patient orientation, the displayed patient head on the control
device is always on the left side of the OR table in the blue area on the touch-
screen.
NO TE
The currently set configuration is highlighted in orange on the touchscreen and
marked with (active).
OR01-14 Prerequisites:
BACK • The start screen is opened.
PATIENT ORIENTATION 1. Check patient orientation from the cur-
rently connected operating table. Please
Observe blue dot position!
refer to the definition of the patient orienta-
1
Patient orientation tion in the respective operating table in-
NORMAL
(active) structions.
2. Touch the PATIENT ORIENTATION but-
Patient orientation
REVERSE ton.
Ø The window for setting the patient ori-
entation is displayed.
3. Touch the Patient orientation NORMAL
button 1 .
- or -
Fig. 38: Setting NORMAL patient orientation touch the Patient orientation REVERSE
button 2 .
Ø Window with the query Patient
orientation correct? is shown.
4. Touch the OK button.
Ø The selected patient orientation is set.
7200.01XX
IFU 7200.01 EN 11 61 / 150
Hand controls and functions
4 Operating menu
7200.01XX
62 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
WARN ING !
Risk of injury!
The use of the preset positioning position may cause undesired movements.
Always observe the patient's position and positioning when aligning the OR table
using preset positioning positions. If undesired movements occur, release the but-
ton and abort the selected patient positioning.
NO TE
The preset positions vary depending on the connected OR table. For the available
preset positions, refer to the OR table's instructions for use.
OR01-14 Prerequisites:
STORE NEW QUICK • Start screen is open.
POSITION MEMORY
1. Touch the PATIENT POSITIONS button.
PATIENT POSITIONS
Standard positions Ø The window with available patient posi-
BEACH CHAIR FLEX REFLEX
tions is shown.
2. Select the desired patient position.
BACK Ø The Move to position window and the
HORIZONTAL
following operating note are displayed.
Move to
Folder position
Folder01
7200.01XX
IFU 7200.01 EN 11 63 / 150
Hand controls and functions
4 Operating menu
OR01-14 Prerequisites:
1
STORE NEW QUICK • The PATIENT POSITIONS menu is open.
POSITION MEMORY
1. Touch the STORE NEW POSITION button
PATIENT POSITIONS
1.
Standard positions
BACK
2. Enter the name of the new patient posi-
HORIZONTAL tion.
3. Touch the OK button.
Individual positions
Ø The new patient position is stored in the
Dr.Kruger_01
Individual positions list in the
PATIENT POSITIONS menu.
EDIT
7200.01XX
64 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
OR01-14 Prerequisites:
STORE NEW QUICK • The PATIENT POSITIONS menu is open.
POSITION MEMORY
1. In the menu PATIENT POSITIONS scroll
PATIENT POSITIONS
down and select the desired position from
Standard positions
the list Individual positions 1 .
BEACH CHAIR FLEX REFLEX
Ø The MOVE TO POSITION window and
the following operating note are dis-
BACK
HORIZONTAL played.
Move to
1 position
Individual positions
Dr.Kruger_01
OR01-14
BACK
MOVE TO POSITION
OR table will move to
position
Dr.Kruger_02.
Watch OR table!
Move to
position
7200.01XX
IFU 7200.01 EN 11 65 / 150
Hand controls and functions
4 Operating menu
OR01-14 Prerequisites:
STORE NEW QUICK • The PATIENT POSITIONS menu is open.
POSITION MEMORY
Individual positions
Dr.Kruger_01
1
EDIT
Select position
4. To rename the position, touch the
RENAME POSITION button 3 .
0123456789ABCDE
Ø A window to rename the position
Dr.Kruger_01 opens.
5. Enter the new name of the position.
Dr.Kruger_02
6. Touch the OK button.
Dr.Kruger_03
Ø Position is saved with a new name.
Dr.Schmidt_01
DELETE RENAME
2 POSITION POSITION 3
7200.01XX
66 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
OR01-14 Prerequisites:
BACK
• The PATIENT POSITIONS menu is open.
TREND: 0° L: 0°
0°
TILT: 0° R: 0°
TREND: 0° L: 0°
0°
TILT: 0° R: 0°
2
STORE POSITION
7200.01XX
IFU 7200.01 EN 11 67 / 150
Hand controls and functions
4 Operating menu
OR01-14 Prerequisites:
BACK
• The PATIENT POSITIONS menu is open.
1. Touch the QUICK MEMORY button.
QUICK MEMORY
Ø The menu QUICK MEMORY is shown.
Store current OR table position
2. Touch the Move to quick memory
1
Move to quick memory position position 1 button.
Ø The MOVE TO POSITION window and
the following operating note are dis-
played.
Move to
position
TREND: 0° L: 0°
0°
TILT: 0° R: 0°
3. Press the displayed multifunction button
[Up] on the control device.
Fig. 48: Move to quick-save memory position
Ø Moves to selected quick-save position.
NO TE
The Lock Menu menu can be accessed via the touchscreen or the [UNLOCK] but-
ton.
With the operating table lock, the motorised adjustment functions of both the operating table
column and the table top are locked to prevent unintentional adjustment of the operating table
and the table top.
With the surgical table top lock, the motorised adjustment functions of the table top are locked to
prevent unintentional adjustment of the table top.
The status display lights up orange next to the activated lock.
NO TE
This menu shows whether the OR table is locked (Wheel Lock enabled) or mov-
able (Wheel Lock disabled).
7200.01XX
68 / 150 IFU 7200.01 EN 11
Hand controls and functions
Operating menu 4
OR01-14 Prerequisites:
CANCEL OK
• The Lock Menu menu is open.
7200.01XX
IFU 7200.01 EN 11 69 / 150
Operation and use
5 General
5.1 General
The mobile table MEERA can be moved within the OR environment on casters. Versions
(7200.01B2/F2) are equipped with a motorised drive.
The OR table top is equipped with a motorised longitudinal shift and mounting points for motor-
ised adjustment of the bottom back plate (NORMAL mounting point) and leg plate (REVERSE
mounting point). Additional manually adjustable accessories may be mounted to the NORMAL
and REVERSE mounting points, as well as the side rails .
The OR table is power-adjusted using the following control devices:
• Corded control device, optional
• IR remote control, optional
• Foot switch, optional
• Override control panel
7200.01XX
70 / 150 IFU 7200.01 EN 11
Operation and use
OR table 5
5.2 OR table
7200.01XX
IFU 7200.01 EN 11 71 / 150
Operation and use
5 OR table
WARN IN G !
Risk of injury!
Without equipotential bonding, products with differing electrical potentials
may cause short circuits on the operating table.
Establish potential bonding prior to each use of the operating table.
NO TE
The electrical conductivity of the product has to be checked annually by an author-
ised service technician.
7200.01XX
72 / 150 IFU 7200.01 EN 11
Operation and use
OR table 5
7200.01XX
IFU 7200.01 EN 11 73 / 150
Operation and use
5 OR table
NO TE
When running on battery power, without the mains cable being connected, the mo-
bile operating is approved for use in Class AP-M hazardous locations.
Please note:
• A complete charging cycle takes about 12 hours.
• The mobile OR table switches off automatically if the charging capacity is less than 15%.
• If the battery charge level is too low, this is indicated on the display of the control unit and the
status indicator of the override control panel.
• As soon as the operating table is connected to the mains network via the mains cable, the
batteries are automatically charged.
7200.01XX
74 / 150 IFU 7200.01 EN 11
Operation and use
OR table 5
DA NG ER !
Risk of explosion!
When connected to the power supply the OR table is not authorised for use
in explosion prone AP-M areas.
An explosion could occur when using disinfectants or cleaning agents con-
taining alcohol, or flammable anaesthetics which are blended with air, oxy-
gen or nitrous oxide.
When operating on the mains supply, never use disinfectants, cleaning agents con-
taining alcohol, or flammable anaesthetics which are blended with air, oxygen or ni-
trous oxide!
DA NG ER !
Potentially fatal due to electrical shock!
Only connect product to voltage supply with protective earth connection.
WARN ING !
The product can no longer be adjusted if the batteries are discharged and the
mains supply is interrupted.
Connect the product for mains operation to an uninterrupted power supply (UPS)
or to a stationary emergency power generator.
NO TE
In order to prevent the charging of the battery during OR operation, it is recommen-
ded to charge the rechargeable battery after OR use and on a daily basis. On prin-
ciple, deep discharge of the rechargeable battery should be avoided.
NO TE
The OR table is disconnected from the mains by means of the plug.
7200.01XX
IFU 7200.01 EN 11 75 / 150
Operation and use
5 OR table
WARN IN G !
Risk of tipping over!
The OR table can tip over while extending the OR table swivel castors if the
maximum height is exceeded.
Before extending the OR table swivel castors [UNLOCK], ensure that the protru-
sion and the 850 mm maximum height of the OR table are complied with. The
height of the OR table is lower than 850 mm if the red area of the adhesive label on
the column is no longer visible.
WARN IN G !
Risk of injury due to the OR table tipping!
As of an overall load of the OR table of 250 kg, do not extend the swivel castors
[UNLOCK] and do not move the OR table.
WARN IN G !
Risk of injury!
Hold the OR table firmly before extending the swivel castors [UNLOCK] in order to
ensure that the OR table cannot roll away unintentionally.
CA UTIO N !
Property damages caused as a result of collision when moving/adjusting the
mobile operating table!
Remove potential hindrances before moving / adjusting the mobile operating table
and avoid collisions.
CA UTIO N !
Property damage!
When moving the OR table use at least one hand in order to prevent any collisions.
7200.01XX
76 / 150 IFU 7200.01 EN 11
Operation and use
OR table 5
CA UTI ON !
Property damage!
When moving the mobile operating table, there is a risk of collision with the
environment.
In order to avoid collisions when moving the mobile operating table, two people
should guide the OR table.
1. Unplug the mains cable and equipotential bonding cable from the OR table.
2. Press the [UNLOCK] button for at least 1 second.
7200.01XX
IFU 7200.01 EN 11 77 / 150
Operation and use
5 OR table
NO TE
The operating table can be moved in both longitudinal and transverse directions.
The swivel castors set themselves to the direction of the most recent motion. If the
OR table is to be moved at an angle of 90° to the most recent direction of motion,
increased exertion of force is required, since the swivel castors are positioned
across the desired direction of travel. If the swivel castors are positioned across the
required direction of travel, it is easier to move the OR table if you start off diagon-
ally to the required direction of travel (angle of approximately 45°).
The assistance of a second person might be required here.
7200.01XX
78 / 150 IFU 7200.01 EN 11
Operation and use
OR table 5
NO TE
Carry out the adjustment functions of the OR table only with the swivel castors re-
tracted (LOCK).
If an adjustment function is performed without retracting the swivel castors (UN-
LOCK), a message appears on the display of the control device indicating that the
swivel castors must be retracted.
OR01-14 Prerequisites:
CANCEL OK • The Lock Menu menu is open.
LOCK MENU 1. Push and hold the [Multifunction button
down].
Operating Table Lock
Ø The swivel castors retract automatic-
Table Top Lock
ally.
Wheel Lock disabled Ø LED below the [LOCK] button on the
override control panel lights up.
Ø OR table is locked.
Ø The OR table can be adjusted.
Unlock
Lock
7200.01XX
IFU 7200.01 EN 11 79 / 150
Operation and use
5 Table tops and accessories
WARN IN G !
Risk of injury due to material failure!
The following accessories may be mounted to the table width extensions
(1001.75A0) and (1001.76A0):
• 1x anaesthesia screen (1002.57A0)
• 1x arm restraint cuff (1002.24C0)
• 1 x arm protector (1002.25A0)
The patient must lie above the centre of the column.
WARN IN G !
Risk of injury due to material failure!
No additional table width extenders may be mounted to the table width extenders
(1001.75A0) and (1001.76A0).
1
3
2
7200.01XX
80 / 150 IFU 7200.01 EN 11
Operation and use
Table tops and accessories 5
NO TE
Use and handling are described in detail in the product-specific instructions for use.
NO TE
In order to mount head rests to the NORMAL / REVERSE mounting points, the
head rest adapter (1130.81A0) is required.
Head rests may be mounted via the extension plate (1131.31BC/FC) or in conjunction with the
head rest adapter (1130.81A0), directly to the NORMAL / REVERSE mounting points.
5.3.2.1 Mounting and removing the head rest using the head rest adapter (1130.81A0)
NO TE
The head rest adapter consists of a left and a right part. If the adapters are mixed
up, the distance of the drilled holes will correspond: Observe the markings L and R.
7200.01XX
IFU 7200.01 EN 11 81 / 150
Operation and use
5 Table tops and accessories
7200.01XX
82 / 150 IFU 7200.01 EN 11
Operation and use
Table tops and accessories 5
NO TE
Adjustment of the REVERSE mounting point (leg plate mounting point) may result
in a slight misalignment of the two table top supporting arms after some time.
At regular intervals align the leg plates or the one-section accessory using the
[LEVEL] button and the [Leg plate up] button to correct any offset. [8 Page 47]
The table top can be extended to enable the positioning of taller patients or to optimise the pa-
tient position. Extension can be mounted on both the NORMAL / REVERSE mounting points of
the table top.
1
1
7200.01XX
IFU 7200.01 EN 11 83 / 150
Operation and use
5 Table tops and accessories
NO TE
Adjustment of the REVERSE mounting point (leg plate mounting point) may result
in a slight misalignment of the two table top supporting arms after some time.
At regular intervals align the leg plates or the one-section accessory using the
[LEVEL] button and the [Leg plate up] button to correct any offset. [8 Page 47]
The table top can be extended with a seat plate extension to enable the positioning of taller pa-
tients or to optimise the patient position. Seat plate extension can be mounted on both the NOR-
MAL / REVERSE mounting points of the table top.
7200.01XX
84 / 150 IFU 7200.01 EN 11
Operation and use
Table tops and accessories 5
NO TE
Adjustment of the REVERSE mounting point (leg plate mounting point) may result
in a slight misalignment of the two table top supporting arms after some time.
At regular intervals align the leg plates or the one-section accessory using the
[LEVEL] button and the [Leg plate up] button to correct any offset. [8 Page 47]
Leg plates can be mounted on both the NORMAL / REVERSE mounting points of the table top.
7200.01XX
IFU 7200.01 EN 11 85 / 150
Operation and use
5 Table tops and accessories
3
4. Check the firm seat of the leg plate.
7200.01XX
86 / 150 IFU 7200.01 EN 11
Operation and use
Table tops and accessories 5
WARN ING !
Risk of injury due to material failure!
The overall load of may not exceed 250 kg.
WARN ING !
Risk of injury for personnel caused by squeezing and shearing!
Risk of injury caused by squeezing and shearing when mounting the indi-
vidual plates of the X-ray top.
Mount the plates of the X-ray top with special care.
NO TE
When the X-ray top is attached, the lowest operating table position will be raised by
approximately 50 mm (2 inches).
NO TE
To insert X-ray cassettes, align the OR table horizontally.
5 6
2 4
1 3
1 X-ray top for head rest (1130.64C0) 4 X-ray top for seat plate
2 X-ray top for extension plate (1131.31BC/FC) 5 X-ray top for seat plate extension (1131.55BC/
3 X-ray top for back plate FC)
6 X-ray top for leg plate (1133.58BC/FC)
7200.01XX
IFU 7200.01 EN 11 87 / 150
Operation and use
5 Table tops and accessories
CA UTIO N !
Property damage!
The X-ray top may fall as a result of the adjustment of the leg or back plate.
With the X-ray top, the table top must always be aligned horizontally.
Always remove the X-ray top before adjusting the leg or back plate.
Prerequisites:
• Two circlips made from rubber are at-
tached to each segment of the x-ray top.
• The circlips are located on two diagonally
positioned pins on each segment.
7200.01XX
88 / 150 IFU 7200.01 EN 11
Operation and use
Table tops and accessories 5
7200.01XX
IFU 7200.01 EN 11 89 / 150
Operation and use
5 Explanation of instructions for use
The CENTRAL position instruction for operation is located at column height on the OR table
base.
With an overall load of 250 kg, the OR table may only be used if the OR table is in the CENTRAL
position: The longitudinal shift of the OR table is lifted and the centre table top bar 1 is above
the column 2 .
5.4.2 Maximum height when moving the OR table with an overall load of up to
250 kg
7200.01XX
90 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
6
DA NG ER !
Potentially fatal!
Patient may be endangered as a result of incorrect use.
Follow the instructions for use for all accessories.
DA NG ER !
Risk of injury due to material failure!
REVERSE patient orientation is not permitted with an overall load exceeding
250 kg.
WARN ING !
Risk of injury due to overloading!
The permitted load of the product depends on the combination of accessor-
ies used.
The product with the lowest permissible load determines the maximum load in the
event that it is combined with other accessories.
Refer to the instructions for use of each accessory for the permissible load.
WARN ING !
Risk of injury due to tipping over of the OR table!
Depending on the overall load, the OR table may only be used with restric-
tions.
Always observe all usage-related restrictions that result in accordance with the
overall load of the OR table.
WARN ING !
Risk of tipping over!
The OR table can tip over while extending the OR table swivel castors if the
maximum height is exceeded.
Before extending the OR table swivel castors [UNLOCK], ensure that the protru-
sion and the 850 mm maximum height of the OR table are complied with. The
height of the OR table is lower than 850 mm if the red area of the adhesive label on
the column is no longer visible.
7200.01XX
IFU 7200.01 EN 11 91 / 150
Approved accessories and table top configuration
6
WARN IN G !
Risk of injury due to the OR table tipping!
As of an overall load of the OR table of 250 kg, do not extend the swivel castors
[UNLOCK] and do not move the OR table.
NO TE
Patients should preferably be positioned in NORMAL patient orientation on the
table top.
The images in this chapter show the accessories that can be used to configure the OR table
within the respective overall load range.
7200.01XX
92 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration for an overall load up to 155 kg 6
1002.15XX
1133.53XX
1002.71XX 1132.34XX
1160.50XX
1007.16XX
1002.72XX
1130.70XX
1002.82XX
1002.73XX
1433.33XX 1132.65XX
1005.49XX
1160.55XX
1002.73XX
1002.07XX
1002.72XX 1133.53XX
1160.35XX 1160.32XX
1002.71XX
1133.58XX
1007.16XX 1131.55XX
1160.32XX
1160.53XX
1133.67XX
1002.07XX
1130.54XX
1005.50XX 1160.64XX
1160.55XX
1005.58XX 1133.73XX
1
1130.53XX
1130.81XX
1130.64XX
155 kg /
1130.67XX 340 lb
1130.69XX
7200.01
1002.74XX
Fig. 75: Table top configuration 1 of 2 for an overall load of up to 155 kg, NORMAL patient orientation,
OR table can be moved [UNLOCK]
7200.01XX
IFU 7200.01 EN 11 93 / 150
Approved accessories and table top configuration
6 Table top configuration for an overall load up to 155 kg
1160.53XX
1002.07XX 1160.64XX
1130.54XX
1005.50XX 1 1160.55XX
1005.58XX
1130.53XX
1130.81XX 1160.32XX
1130.64XX
1131.55XX
1131.31XX
1130.67XX
1130.81XX
1130.69XX
1130.81XX
1002.74XX
155 kg /
340 lb
7200.01
Fig. 76: Table top configuration 2 of 2 for an overall load of up to 155 kg, NORMAL patient orientation,
OR table can be moved [UNLOCK]
7200.01XX
94 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration for an overall load up to 155 kg 6
1002.07XX 1002.73XX
1002.72XX
1160.35XX
1130.56XX
1007.16XX 1002.71XX
1160.55XX
1160.50XX
1160.53XX
e
L
or
1130.70XX 1160.64XX
1160.32XX
1
1160.55XX
1132.65XX
1002.82XX
1133.58XX 1005.48XX
1131.55XX 1433.34XX
1133.67XX
1002.10XX
1133.73XX
155 kg /
340 lb
7200.01
Fig. 77: Table top configuration 1 of 2 for an overall load of up to 155 kg, REVERSE patient orientation,
OR table can be moved [UNLOCK]
7200.01XX
IFU 7200.01 EN 11 95 / 150
Approved accessories and table top configuration
6 Table top configuration for an overall load up to 155 kg
1002.15XX
1007.18XX
1007.16XX
1002.71XX
1007.21XX
1002.72XX
1132.34XX
1007.16XX 1002.73XX
1002.73XX
1160.35XX
1002.07XX
1002.72XX
1160.55XX 1160.53XX
1002.71XX
1131.55XX
1007.16XX
1160.64XX
1160.32XX 1130.53XX
1
1130.81XX
1130.64XX
1131.31XX
1130.81XX 1130.67XX
1130.81XX
1130.69XX
1002.74XX
155 kg /
340 lb
7200.01
Fig. 78: Table top configuration 2 of 2 for an overall load of up to 155 kg, REVERSE patient orientation,
OR table can be moved [UNLOCK]
7200.01XX
96 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration for an overall load up to 155 kg 6
1007.04XX
1002.07XX
1130.54XX
1005.50XX 1160.55XX
1419.01XX
1005.58XX 1003.37XX
1130.53XX
1160.32XX
1130.64XX
1131.55XX
1131.31XX
1130.67XX 1130.56XX
1130.70XX
1130.69XX 1130.81XX
1132.65XX
1130.81XX
1002.74XX
1133.53XX
1131.55XX
1133.58XX
1002.15XX 1160.55XX
1133.67XX
1132.34XX 1160.32XX
1007.16XX
1002.71XX 1133.73XX
1002.72XX
1160.50XX
1002.73XX
155 kg /
340 lb
7200.01
Fig. 79: Table top configuration 1 of 2 for an overall load of up to 155 kg, NORMAL patient orientation,
OR table is locked [LOCK]
7200.01XX
IFU 7200.01 EN 11 97 / 150
Approved accessories and table top configuration
6 Table top configuration for an overall load up to 155 kg
1002.82XX
1433.33XX
1005.49XX
1005.48XX
1002.73XX
1002.07XX
1002.72XX
1160.35XX
1002.71XX
1002.07XX 1007.16XX
1005.50XX 1130.54XX
1005.58XX
1160.55XX
1130.53XX
1160.53XX
1130.64XX 1160.32XX
1160.64XX
1130.67XX 1
1130.69XX
1130.81XX
1002.74XX
155 kg /
340 lb
7200.01
Fig. 80: Table top configuration 2 of 2 for an overall load of up to 155 kg, NORMAL patient orientation,
OR table is locked [LOCK]
7200.01XX
98 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration for an overall load up to 155 kg 6
1002.82XX
1433.33XX 1005.49XX
1433.34XX 1005.48XX
1002.10XX
1130.70XX
1002.73XX
1002.07XX
1002.72XX
1132.65XX
1160.55XX
1160.35XX 1002.71XX
1133.53XX
1160.32XX 1007.16XX
1131.55XX
1160.55XX
1133.67XX 1160.64XX 1130.64XX
1160.64AC
1133.73XX 1130.67XX
1130.81XX
1160.32XX 1130.69XX
1160.50XX
1002.74XX
155 kg /
340 lb
7200.01
Fig. 81: Table top configuration 1 of 2 for an overall load of up to 155 kg, REVERSE patient orientation,
OR table is locked [LOCK]
7200.01XX
IFU 7200.01 EN 11 99 / 150
Approved accessories and table top configuration
6 Table top configuration for an overall load up to 155 kg
1002.15XX
1132.45XX
1131.55XX 1132.34XX
1002.71XX
1007.16XX
1002.72XX
1131.31XX
1002.07XX
1160.55XX 1130.54XX
1005.50XX 1002.73XX
1160.55XX
1005.58XX
1130.53XX
1160.32XX 1160.32XX
1130.81XX
1130.64XX
1130.81XX
1130.67XX
1419.01XX 1130.69XX
1003.37XX
1002.74XX
1130.56XX 1007.24XX
155 kg /
340 lb
7200.01
Fig. 82: Table top configuration 2 of 2 for an overall load of up to 155 kg, REVERSE patient orientation,
OR table is locked [LOCK]
7200.01XX
100 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration with an overall load of 155-250 kg 6
1002.73XX
1002.07XX
1002.72XX
1160.35XX 1160.55XX
1133.53XX
1002.71XX
1007.16XX 1160.32XX
1133.58XX
1131.55XX
1002.82XX
1433.33XX 1133.58XX
1005.49XX
1005.48XX
1160.50XX
1002.15XX
1132.34XX 1133.67XX
1002.71XX 1007.16XX
1133.73XX
1002.72XX
1002.73XX
250 kg /
555 lb
7200.01
Fig. 83: Table top configuration 1 of 2 for an overall load of 155-250 kg, NORMAL patient orientation,
OR table can be moved [UNLOCK]
7200.01XX
IFU 7200.01 EN 11 101 / 150
Approved accessories and table top configuration
6 Table top configuration with an overall load of 155-250 kg
1002.73XX
1002.07XX 1160.35XX
1160.55XX
1002.72XX 1160.53XX
1160.32XX
1160.64XX
1
1002.71XX
1160.35XX
1007.16XX
1160.53XX
1160.55XX 1131.55XX
1160.64XX
1002.07XX
1160.32X
1130.54XX
1005.50XX
1005.58XX
1130.81XX
1130.53XX
1131.31XX
1130.64XX
1130.81XX
1130.67XX
1130.81XX
1130.69XX
250 kg /
555 lb
1002.74XX
7200.01
Fig. 84: Table top configuration 2 of 2 for an overall load of 155-250 kg, NORMAL patient orientation,
OR table can be moved [UNLOCK]
7200.01XX
102 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration with an overall load of 155-250 kg 6
1131.55XX 1131.31XX
1130.54XX
1002.07XX
1005.50XX
1130.81XX
1005.58XX
1130.81XX
1160.55XX 1130.53XX
1002.82XX
1133.53XX
1133.58XX
1433.34XX 1130.67XX
1005.48XX
1131.55XX
1002.10A0
1130.69XX
1133.58XX
1130.81XX
1160.55XX
1002.74XX
1160.53XX
1160.50XX
1160.64XX 1002.73XX
1160.32XX
1160.64AC 1002.07XX
1133.67XX 1002.72XX
1160.35XX
1002.71XX
1133.73XX
1007.16XX
250 kg /
555 lb
7200.01
Fig. 85: Table top configuration for an overall load of 155–250 kg, REVERSE patient orientation, UN-
LOCK
7200.01XX
IFU 7200.01 EN 11 103 / 150
Approved accessories and table top configuration
6 Table top configuration with an overall load of 155-250 kg
1002.82XX
1433.33XX
1005.49XX
1160.55XX
1005.48XX 1133.53XX
1160.32XX
1002.07XX
1130.54XX
1005.50XX 1133.58XX
1130.81XX
1005.58XX
1131.55XX
1130.53XX
1160.55XX
1133.64XX
1133.58XX
1130.81XX 1160.32XX
1130.67XX
1160.50X
1130.69XX
1133.67XX
1002.74XX
1002.15XX 1133.73XX
1132.34XX
1007.16XX
1002.71XX
250 kg /
555 lb
1002.72XX
1002.73XX
7200.01
Fig. 86: Table top configuration 1 of 2 for an overall load of 155-250 kg, NORMAL patient orientation,
OR table is locked [LOCK]
7200.01XX
104 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration with an overall load of 155-250 kg 6
1002.73XX
1002.07XX 1160.35XX
1160.55XX
1002.72XX 1160.53XX
1160.32XX
1160.64XX
1
1002.71XX
1160.35XX
1007.16XX
1160.53XX
1160.55XX 1131.55XX
1160.64XX
1002.07XX
1160.32X
1130.54XX
1005.50XX
1005.58XX
1130.81XX
1130.53XX
1131.31XX
1130.64XX
1130.81XX
1130.67XX
1130.81XX
1130.69XX
250 kg /
555 lb
1002.74XX
7200.01
Fig. 87: Table top configuration 2 of 2 for an overall load of 155-250 kg, NORMAL patient orientation,
OR table is locked [LOCK]
7200.01XX
IFU 7200.01 EN 11 105 / 150
Approved accessories and table top configuration
6 Table top configuration with an overall load of 155-250 kg
1007.24XX
1002.73XX
1002.07XX
1002.72XX
1002.71XX
1160.35XX
1007.16XX
1160.53XX
1160.55XX
1160.64XX
1160.64AC
1130.54XX
1160.32XX 1002.07XX
1130.81XX
1005.50XX
1131.55XX
1005.58XX
1131.31XX
1130.53XX
1130.81XX 1130.64XX
1130.81XX 1130.67XX
1130.69XX
250 kg /
1130.74XX
555 lb
7200.01
Fig. 88: Table top configuration 1 of 2 for an overall load of 155-250 kg, REVERSE patient orientation,
OR table is locked [LOCK]
7200.01XX
106 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration with an overall load of 155-250 kg 6
1130.54XX
1002.07XX
1005.50XX
1002.82XX
1160.55XX
1005.58XX
1130.64XX
1133.58XX 1433.34XX 1005.48XX
1131.55XX
1002.10XX 1130.67XX
1130.69XX
1133.58XX
1130.81XX
1160.55XX
1002.74XX
1160.53XX
1160.50XX
1160.64XX 1002.73XX
1160.32XX
1160.64AC 1002.07XX
1133.67XX 1002.72XX
1160.35XX
1002.71XX
1133.73XX
1007.16XX
250 kg /
555 lb
7200.01
Fig. 89: Table top configuration 2 of 2 for an overall load of 155-250 kg, REVERSE patient orientation,
OR table is locked [LOCK]
7200.01XX
IFU 7200.01 EN 11 107 / 150
Approved accessories and table top configuration
6 Table top configuration with an overall load of 250–450 kg
7200.01XX
108 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Table top configuration with an overall load of 250–450 kg 6
1160.55XX
1160.64XX
CA46.0611
1160.32XX
1133.53XX
1131.31XX
1130.64XX 1133.58XX
1130.67XX
1130.81XX
454 kg /
1000 lb
7200.01
Fig. 90: Table top configuration for an overall load of 250-454 kg, NORMAL patient orientation, LOCK
7200.01XX
IFU 7200.01 EN 11 109 / 150
Approved accessories and table top configuration
6 Approved accessories
7200.01XX
110 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Approved accessories 6
6.4.3.2 Accessories for the NORMAL mounting point up to 155 kg, OR table locked (LOCK)
When the OR table is locked (LOCK), the following accessories can also be mounted to the OR
table.
7200.01XX
IFU 7200.01 EN 11 111 / 150
Approved accessories and table top configuration
6 Approved accessories
7200.01XX
112 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Approved accessories 6
6.4.3.4 Accessories for the REVERSE mounting point up to 155 kg, OR table locked (LOCK)
When the OR table is locked (LOCK), the following accessories can also be mounted to the OR
table.
7200.01XX
IFU 7200.01 EN 11 113 / 150
Approved accessories and table top configuration
6 Approved accessories
7200.01XX
114 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Approved accessories 6
6.4.4.3 Accessories for the REVERSE mounting point up to 250 kg, OR table locked (LOCK)
When the OR table is locked (LOCK), the following accessories can also be mounted to the OR
table.
7200.01XX
IFU 7200.01 EN 11 115 / 150
Approved accessories and table top configuration
6 Projection
6.5 Projection
NO TE
If accessories are to be used within table top configurations that are not listed in
this chapter, the accessories can be used taking into account the maximum projec-
tion of the OR table or table top and the maximum weight load of the accessories.
7200.01XX
116 / 150 IFU 7200.01 EN 11
Approved accessories and table top configuration
Projection 6
7200.01XX
IFU 7200.01 EN 11 117 / 150
Display notes
7 Structure of display notes
7 Display notes
Symbol Meaning
The icon identifies operating notes.
The operating notes are shown with no background colour.
7200.01XX
118 / 150 IFU 7200.01 EN 11
Display notes
Notes on use 7
7200.01XX
IFU 7200.01 EN 11 119 / 150
Display notes
7 Warning notes / Status messages
NO TE
With every status message, the error code is displayed under the attention symbol.
If the error cannot be corrected, note the error code and forward it to the service
technician authorised by Getinge.
7200.01XX
120 / 150 IFU 7200.01 EN 11
Display notes
Warning notes / Status messages 7
7200.01XX
IFU 7200.01 EN 11 121 / 150
Cleaning and disinfection
8 General information
DA NG ER !
Risk due to mishandling of cleaning agents and disinfectants!
• The entire cleaning process may only be completed by qualified technicians.
• For information on concentration, temperature and contact and drying times,
refer to the instructions of the detergent and disinfectant manufacturer.
• Observe current national and international regulations for hygiene in the med-
ical field.
• Observe the cleaning and hygiene regulations of the hospital.
DA NG ER !
Risk of infection!
Residues on the product (e.g. blood, secretions etc.) can prevent proper dis-
infection.
• Remove coarse impurities from the product immediately with suitable non-fixing
agents.
• Adjust the cleaning agent to the disinfectant (using a combination agent if ne-
cessary) in order to avoid interactions.
DA NG ER !
Risk of infection!
Product may be contaminated.
• Always wear gloves when cleaning / disinfecting.
• If necessary, take further protective measures.
DA NG ER !
Potentially fatal electrical shock!
• Make sure that the mains connection is disconnected before cleaning and dis-
infection.
• Ensure that no liquids can penetrate any live parts.
DA NG ER !
Risk of explosion!
Agents containing alcohol can form explosive vapour mixtures and ignite
where high-frequency equipment is being used. The cleaning and disinfect-
ing agents must be dried before use.
Ensure that there are no alcoholic residues on the product during high frequency
use.
7200.01XX
122 / 150 IFU 7200.01 EN 11
Cleaning and disinfection
General information 8
WARN ING !
Risk of injury!
If unsuitable cleaning agents and disinfectants are used, the antistatic prop-
erty and electrical conductivity of the product may be lost, which are re-
quired to prevent electrostatic charges as required by the standard.
Only use detergents and disinfectants of the specified active ingredient groups.
CA UTI ON !
Material damage due to friction and crevice corrosion!
During machine preparation, lubricants are washed out of the joints and
moving parts.
• Lubricate joints and moving parts with appropriate lubricants after preparation.
• Use paraffin oil based lubricants if possible with accessories.
• A lubrication plan can be requested from the responsible Getinge office.
CA UTI ON !
Improper cleaning and disinfection can cause property damage!
• Observe the manufacturer's instructions for concentrations of cleaning agents
and disinfectants
• Perform visual and functional inspections after each cleaning and disinfection
process.
CA UTI ON !
Property damage!
Do not use any mechanical cleaning or disinfection processes.
7200.01XX
IFU 7200.01 EN 11 123 / 150
Cleaning and disinfection
8 General information
8.1.2 Padding
DA NG ER !
Risk of injury!
The adhesive force of the SFC pad on the product is reduced if the adhesive
tapes of the Velcro fastener on the product are contaminated. The patient
may slip off the OR table if the SFC pad is not secured properly to the sur-
face.
• Remove contamination with a plastic comb.
• After use, prepare the plastic comb with suitable cleaning and disinfecting
agents.
CA UTIO N !
Improper cleaning and disinfection can cause property damage!
Moisture can penetrate damaged padding. Hygiene requirements are then no
longer satisfied.
Replace damaged padding immediately.
NO TE
Remove pads which are removable from the product before cleaning and disinfec-
tion, then only replace them once they have dried.
7200.01XX
124 / 150 IFU 7200.01 EN 11
Cleaning and disinfection
Cleaning agents and disinfectants 8
7200.01XX
IFU 7200.01 EN 11 125 / 150
Cleaning and disinfection
8 Prepare the OR table for cleaning
CA UTIO N !
Improper cleaning can cause property damage!
Cleaning agents may not be sprayed directly into joints and cracks, and do not use
pressure / steam cleaners!
CA UTIO N !
Improper preparation can cause property damage!
Use soft, lint-free cloths to prepare the product.
8.4.1 Pre-cleaning
In case of heavy soiling it is recommended to pre-clean the product with non-fixing agents.
8.4.2 Disinfection
1. Select a suitable disinfectant according to the specifications.
2. Use the concentration specified by the disinfectant manufacturer for proper disinfection.
3. Thoroughly wipe the product with a soft, lint-free cloth moistened with disinfectant solution.
4. Make sure that the product is free of impurities.
8.4.3 Drying
Wipe-down disinfection does not require any drying, as excess disinfectant evaporates.
1. Observe the drying time specified by the disinfectant manufacturer.
2. Ensure that only dry padding is attached to the product.
8.4.4 Inspections
1. Carry out visual and functional inspections.
7200.01XX
126 / 150 IFU 7200.01 EN 11
Maintenance
Visual and functional inspections 9
9 Maintenance
Suggestion:
4 Are there fissures in the pad- □ 1. Do not use the padding any □
ding? longer.
Comment:
5 Does the padding no longer ad- □ 1. Do not use the padding any □
here? longer.
Comment:
7200.01XX
IFU 7200.01 EN 11 127 / 150
Maintenance
9 Visual and functional inspections
Comment:
7200.01XX
128 / 150 IFU 7200.01 EN 11
Maintenance
Malfunctions and troubleshooting 9
9.2.1 OR table
No Appearance/Inspection Activity/Rectification/Measure
.
1 The end positions for the motor- 1. Execute the following motorised adjustment
powered adjustment functions have functions to the end position:
not been used over an extended
period of time, causing "play" in the ▪ Inclining the table top
cardan suspension. ▪ Tilting the table top laterally
▪ Moving the table top longitudinally
2 Battery charge status on the override Recharge the OR table batteries:
operating panel flashes red / orange
1. Connect the mains cable to the OR table and
and a warning notice is displayed on
the control device. then to the power socket.
Ø The status display for mains connection on
the override control panel is lit up in green.
Ø The rechargeable battery of the OR table is
being charged.
Tab. 26: Faults and troubleshooting
7200.01XX
IFU 7200.01 EN 11 129 / 150
Maintenance
9 Malfunctions and troubleshooting
No Appearance/Inspection Activity/Rectification/Measure
.
3 The OR table with autodrive can no If the swivel castors do not extend:
longer be moved.
1. Remove the blindcap (1) on the OR table base.
2. Insert the blind cap on the wrench (2).
3. Insert the other end of the wrench into the
mounting point (3) on the OR table.
1 4. Turn the wrench clockwise (4).
Ø The swivel castors extend.
Ø The wrench can no longer be moved when
2
the swivel castors are fully extended.
4
5. Pull the wrench out of the mounting point on the
3
OR table and the blind cap.
6. Store the wrench in the blind cap and reattach
the blind cap to the base of the OR table.
7. Move the OR table.
8. Inform service personnel immediately.
Please note:
Do not press the [LOCK] button if the castors were
extended with the wrench. Otherwise, the OR table
will be lowered and can no longer be mobilised.
4 The OR table without autodrive can If the swivel castors do not extend:
no longer be moved.
1. Loosen the five screws along the sides of the
OR table base cover.
2. Remove the OR table base cover.
3. Remove the screws from the enclosed pack-
aging in the OR table base.
4. Insert three screws (1) into each swivel castor
and tighten clockwise with a wrench.
Ø The swivel castors extend.
1 Ø The wrench can no longer be moved when
the swivel castors are fully extended.
5. Attach the OR table base cover.
6. Move the OR table.
7. Inform service personnel immediately.
Tab. 26: Faults and troubleshooting
7200.01XX
130 / 150 IFU 7200.01 EN 11
Maintenance
Malfunctions and troubleshooting 9
No Appearance/Inspection Activity/Rectification/Measure
.
1 Weak transmission power Batteries discharged.
1. Recharge the IR remote control in the charging
unit.
Defective batteries.
1. Have the IR remote control checked by author-
ised service technicians.
Tab. 27: Faults and troubleshooting
7200.01XX
IFU 7200.01 EN 11 131 / 150
Maintenance
9 Inspection and Maintenance
9.5 Repair
A damaged product may not be used and you may not repair it yourself. Please have the follow-
ing information at hand for your Getinge representative:
• Description of the defect
• Product number (see type plate)
• If available: Serial number (see type plate)
• Construction year (see type plate)
Hotline for Germany: +49 (0) 180 32 12 144
Hotlines for other countries can be found at www.getinge.com.
7200.01XX
132 / 150 IFU 7200.01 EN 11
Maintenance
Type plate position 9
7200.01XX
IFU 7200.01 EN 11 133 / 150
Maintenance
9 Replacing fuse/setting the mains voltage
7200.01XX
134 / 150 IFU 7200.01 EN 11
Technical specifications
General specifications 10
10 Technical specifications
NO TE
For dimensions, adjustment ranges and weight specifications, there is a tolerance
of ±5 %, if no other tolerance is specified.
7200.01XX
IFU 7200.01 EN 11 135 / 150
Technical specifications
10 Weight
10.6 Weight
Net weight 291 kg
10.7 Dimensions
7200.01XX
136 / 150 IFU 7200.01 EN 11
Technical specifications
Adjustment ranges 10
10.8.2 Inclination
7200.01XX
IFU 7200.01 EN 11 137 / 150
Technical specifications
10 Adjustment ranges
10.8.3 Tilt
7200.01XX
138 / 150 IFU 7200.01 EN 11
Technical specifications
Adjustment ranges 10
80°
90°
7200.01XX
IFU 7200.01 EN 11 139 / 150
Technical specifications
10 Table top positions
7200.01XX
140 / 150 IFU 7200.01 EN 11
Technical specifications
Table top positions 10
7200.01XX
IFU 7200.01 EN 11 141 / 150
Technical specifications
10 Table top positions
20°
40°
20°
20° 40°
20°
7200.01XX
142 / 150 IFU 7200.01 EN 11
Technical specifications
Electromagnetic compatibility (EMC) 10
7200.01XX
IFU 7200.01 EN 11 143 / 150
Technical specifications
10 Electromagnetic compatibility (EMC)
7200.01XX
144 / 150 IFU 7200.01 EN 11
Technical specifications
Electromagnetic compatibility (EMC) 10
7200.01XX
IFU 7200.01 EN 11 145 / 150
Index
A D
Abbreviations 9 Definition
Accessories 23 applied part 16
Side rail 110 Caution 11
Accessory weights 29 CENTRAL position 15
Air humidity 135 Coordinate system 12
Ambient conditions 135 Danger 11
AP-M zone 13 Environment 11
Applicable standards 23 Inclination 12
applied part 16 Lateral tilt 12
Area with a risk of explosions Note 11
AP-M zone 13 Protrusion 13
Atmospheric pressure 135 Warning 11
Autodrive 76, 77 Descriptor 11
Dimensions 136
Directions for use 90
B Disinfectant 125
Batteries Disinfection 122
disposal 20 Disposal
Batteries 20
C Cleaning and disinfection 20
Packing 20
CENTRAL position 15, 90
Pad 20
Charge batteries 75
Product 20
Cleaning 122
Rechargeable battery 20
Cleaning agents 125
Control device
Mounting 39 E
Control devices 24 Electrical specifications 135
Corded control devices Equipotential bonding 72
Connect 41 Extension plate 83
Removing 41
F
Foot switch 42
H
Horizontal alignment
Patient 51
Hydraulic oil
Air bubbles 37
I
Inclination 12, 137
head down 48
Reverse Trendelenburg 48
Initial operation 33
Inspection 132
IR code
display 57
Groupings 36
Identification 36
7200.01XX
146 / 150 IFU 7200.01 EN 11
Index
L R
Lateral tilt 12, 49, 138 Rechargeable battery
Latex-free 24 disposal 20
Leg plate 85, 86 Repair 132
LEVEL 51 Reverse Trendelenburg 12
Longitudinal 12 Trendelenburg 12
Risk of explosion 27, 34, 75
M
Main menu 54 S
Mains operation 75 Sagittal 12
Mains power cable 75 Seat plate extension 84
Maintenance 132 Service interface
Malfunctions 129 Connection 34
Signals
acoustic (OR table) 71
N Software version 60
Noise level 135 Special notes on use 118
Notes on use 118 Standards 23
Status messages 120
O Status reports
Error reports 118
Operating table
Notes on use 118
connect 54
Warning notes 118
OR table
Surface temperature 135
disconnect 57
Symbols 17
Lowering 45
System information
Raising 45
open 60
overall load 87
Permitted 13, 27
T
P Table top
Lateral tilt 49
Packing 20
Longitudinal shift 50
Patient
Table top configurations
Horizontal alignment 51
Overall load 155 kg to 250 kg 101
Patient orientation
Overall load 250 kg to 450 kg 108
Adjusting 61
Overall load of up to 155kg 93
Definition 14
Temperature 135
Patient position
Transport position 13
edit 66
Transverse 12
preset 63
Trendelenburg 12
quick-save 67
Reverse Trendelenburg 12
Save 64
Troubleshooting 129
Select 63, 65
user-defined 64
Permitted overall load 13 U
Pictogram 11 Used electrical devices 20
Positioning position 13
Preparation 123
Protrusion 13 V
Visual and functional inspections 127
7200.01XX
IFU 7200.01 EN 11 147 / 150
Index
W
Warning notes 120
Weight
Accessories 29
Maximum permitted overall load: 27
Net weight 136
Overall load 87
7200.01XX
148 / 150 IFU 7200.01 EN 11
Notes
MAQUET GmbH · Kehler Str. 31 · 76437 Rastatt · GERMANY · Phone: +49 7222 932 -0
www.getinge.com
IFU 7200.01 EN 11 2020-03-03