Professional Documents
Culture Documents
SyncoFloor - EP Hybrid Primer SPR 701 SL (2K)
SyncoFloor - EP Hybrid Primer SPR 701 SL (2K)
DESCRIPTION
SyncoFloor EP Hybrid Primer SPR 701 SL (2K) is a unique technology based on
Hybridized Epoxy polymere with Methoxysilane to improve adhesion in wet or dry surface.
SyncoFloor EP Hybrid Primer SPR 701 SL (2K) is a moisture tolerance 5% that works as
a universal primer for use with most Syncoat floor systems and used for priming concrete
substrates, cement screeds.
RECOMMENDED USE
SyncoFloor EP Hybrid Primer SPR 701 SL (2K) is suitable for priming concrete surfaces
prior to the application of SyncoFloor Hybrid Top Coat STC 613/903/1003 or SyncoFloor
Top Coat STC 723 ( 2k & 3 k ) based floor toppings.
SPECIALS – CHARACTERISTICS
• Solvent less
• Moisture tolerance
• Low Viscosity
• Improves the adhesion of Top Coat.
BASIC DATA
Colour Clear
1
Theoretical Spreading Rate / 0.18 kg/m2 for 100 microns
Coverage
Physical Properties
2
INSTRUCTION FOR USE Surface preparation
Thorough surface preparation is vital. Concrete shall be clean, dry and free of all contaminant
such as dirt, oil grease etc. and concrete structurally sound and sufficient compressive strength
min. 30 N/mm2 with a min. pull off strength of 1.5 N/mm2. For best results Syncoat
recommends mechanical preparation techniques. (For example, metal grinding or using
diamond/resin pad).
Mixing
Add the entire contents of the hardener tin to the base and mix thoroughly for 3 mins. until
homogeneous, using a slow speed drill ( 200 - 400 rpm) fitted with a suitable mixing paddle.
Application
Once mixed the primer should be applied immediately in a thin continuous film to the clean
prepared surface. Work the primer into the surface using a notch or metal trowel and follow
by spiked roller. Excess application and puddling should be avoided. On porous surfaces.
SyncoFloor EP Hybrid Primer SPR 701 SL (2K) will be absorbed very quickly. For
SyncoFloor Hybrid Top Coat 613/STC 903/1003 applications, leave the SyncoFloor EP
Hybrid Primer SPR 701 SL (2K) to dry min. 8 hours / overnight.
Thinner Not
required
Mixing Ratio
Base : Hardener : Extender = 3 : 1 ( by weight )
3
Cleaner / Cleaning Solvent
SyncoThinner Hydrid 001
Maximum 1 month
Pot Life
Temperature Pot Life
320C 45 minutes
4
SAFETY PRECAUTIONS
Keep away from heat, spark and open flames. Avoid breathing of vapour on skin and eye
contact. Keep container closed and store in a cool, ventilated area when not in use.
Proper ventilation and protective measures must be provided during mixing, application and
drying, to keep vapour concentration within safe limits and to protect against toxic hazard.
Necessary safety equipment must be used and ventilation requirements carefully observed,
especially in confined and enclosed space, such as tank interior and building.
DISCLAIMERS
The information in this technical data sheet is given to the best of our knowledge based on laboratory testing and
practical experience. If the product is used under condition beyond our control, we cannot guarantee anything
but the quality of the product itself. The information in this technical data sheet is liable for modification from
time to time in the light of experience and our policy of continuous product development, and without further
notice. Feb. - 2022