Professional Documents
Culture Documents
pp_b_13-1
pp_b_13-1
RR 5700 Series
Narrow-Aisle
Reach Truck
RR 5700
Series
C
RR5200
RR 5700 Series Narrow-Aisle
Reach Truck
4"
4"
32.5"
48"
36"
34.5" 14
15 23.3" 13
8.75" *
18 41"
9 8"
***
4.63" 4.63"
10 1.0" 1.0" 31"
17
2 ø 4 x 4.1" 2 ø 4 x 2.9"
6.75" 6.75"
2.0" 2.0"
57.50"
2 ø 6 x 4.1" 2 ø 6 x 2.9"
9.4"
10.4" 37 2 ø 5 x 4.1" ø 10.5 x 4" - 35/40 2 ø 5 x 2.9"
ø 10.5 x 4.5" - 45
38 38 38
* Top tie bar width – 33" for 240" or 270" lift. 35" for 300" and above.
** 1.0" on lift heights above 321"
*** Standard third post location, refer to dimension in top view.
RR 5700 Series Specifications
4000 lb fpm na 31 na 74
4500 lb fpm na na na 70
25a Speed Lift - AC*** Empty fpm na na 158 153
1000 lb fpm na na 138 139
2000 lb fpm na na 118 121
3000 lb fpm na na 101 105
3500 lb fpm na na 94 97
4000 lb fpm na na na 90
4500 lb fpm na na na 82
26 Speed Lower Empty/Loaded fpm 110 / 110 110 / 110 110 / 110 110 / 110
37 Tires Size - Drive/Caster in 13 x 5.5 / 8 x 4
38 Wheelbase (Standard Wheel) Comp’t “B” in 54.24 54.24 54.24 na
Comp’t “C” in 56.24 56.24 56.24 59.57
Comp’t “D” in na na na 61.32
Chassis
Model RR 5725-45 TT
9 Lift Height 321" 341" 366" 400"
Free Lift* 92 101 112 124
10 Guard Height 95 95 95 95
Mast
“C” lb 7231 na na na
RR 5725-45 “D” lb 7273 7524 na na
“E” lb 7328 7579 7795 8029
Capacity 15. Lift slow down 12" from 28. Work Assist™ Accessories: Clipboard surface and console
Model RR 5715-35: 3500 lb maximum lift height • Accessory tube storage pockets are standard.
at 24" load center, 24 volt 16. Lift Limit without override • Accessory RF Crown’s Access 1 2 3®
Model RR 5715-40: 4000 lb 17. Crown-manufactured drive mounting plate Comprehensive System
at 24" load center, 24 volt and lift motors Control provides optimum
• Accessory RF
Model RR 5725-35: 3500 lb at performance and control by of-
18. Offset articulated drive axle mounting bracket
24" load center, 36 volt fering a communication interface
with 190º steer arc • Accessory clamp for operators and technicians,
Model RR 5725-45: 4500 lb at 19. Key switch • Accessory clip pad intelligent coordination of lift truck
24" load center, 36 volt 20. Horn systems and simplified service
• Accessory hook
Batteries with advanced diagnostics.
21. Emergency power • Accessory clip pad
Battery removal from left or right disconnect The Crown display is used for
and hook
side of truck. Standard battery easy trouble shooting, accessing
22. 350 amp battery connector • Accessory pocket
compartment rollers for extraction service history and setting per-
with mechanized equipment. 23. Large diameter battery rollers formance features. A distribution
29. InfoLink® Ready System
Standard Equipment 24. Color-coded wiring panel is conveniently located with
Operator Compartment all test points, control fuses and
1. Crown’s Access 1 2 3® 25. Third post Soft, rounded surfaces make
Comprehensive central wiring for easy trouble-
26. Reverse steering compartment interior more shooting.
System Control comfortable. Streamlined
2. 24 or 36 volt system 27. InfoPoint® System with Quick exterior smooths entry/exit for Three modes of performance
Reference Guide the operator. A low floor height, can be selected to accommodate
3. AC Traction System
Optional Equipment (9.4"), first greets the operator. operator experience or application
4. DC Hydraulics with 1. AC Hydraulics with electronic A 270 square inch floor and requirements.
hydrostatic power steering power steering patented suspended floorboard OnTrac™ Anti-Slip
5. OnTrac™ Anti-Slip provide comfortable footing. Traction Control
2. Rack Height Select and Tilt
Traction Control Position Assist The brake pedal design allows Crown's Access 123 technology
6. Operator Compartment variable side-stance positions monitors truck dynamics, opti-
3. Capacity monitor mizes traction, reduces spinning
• Variable side stance for the operator. The operator
4. Camera and color monitor can change positions to increase during acceleration, prevents
• Flexible five-point (Not available on 5715) comfort and productivity. lock-up during braking, and
positioning 5. Mast lift heights to 400" greatly extends tire life.
Five-point positioning provides
• Back support with integral 6. Lift limit with override Travel
control and stability, starting with
hip support Crown’s AC traction system is
7. Drive-in rack the right hand on the multi-task
• Arm/elbow support padding controller and the left hand on the a closed loop traction control
cylinder package system that maintains top speed
• Padded compartment steer tiller. Left foot on the brake
8. Drive-in rack mast (4500 lb only) throughout the battery charge.
interior walls pedal and the right foot on the
9. Drive-in rack third post Engineered and manufactured by
presence sensor. The operator’s Crown, the AC motor, controller
• Operator console with work
10. Chain slack kit back is naturally fitted against the and drive unit are designed spe-
surface and storage
wrap-around support cushion. cifically for lift truck applications.
• Suspended floor 11. Removable outrigger tips
An entry bar with sensors to On an inclined surface or when
• 270 square inch floor area 12. Mesh screen mast guard
automatically slow truck travel, interfacing with push-back
• Entry bar 13. Battery retainer with interlock encourages safe foot positioning racking, the “truck hold” feature
• Premium urethane 14. 5th battery compartment inside the truck. electronically brakes the truck
floorboard cushion roller The multi-task control enables the when the handle is in neutral.
15. 36" and 42" high operator to maneuver the truck The operator does not have to
• Console light
load backrests while blending lift and accessory release the brake pedal, improving
7. Multi-task control handle functions for improved produc- comfort and control in these ap-
16. Crown-manufactured side- plications. Selected travel speed
8. Crown display shifter, 2" - 4" each way tivity. Control handle activation
forces are reduced. The soft grip remains constant regardless of
• Event code display with five 17. Overhead guard mesh surfaces, load weight or grades.
(5) key navigation. steer tiller with hydrostatic steer-
Less throttling of control handle
18. Polished and tapered forks ing or optional electronic power
• Hour meters / travel means better truck control and
19. Fork lengths steering reduces operator fatigue.
distance / stop watch less fatigue to the operator.
20. Work lights Operator visibility is improved with:
• PIN Code access capable Steering
• Access 1 2 3 diagnostics 21. Keyless on/off switch • Low profile power unit Load sense hydrostatic steering
22. Fan • High visibility mast is an on-demand system which
• P1, P2, P3 performance reduces energy consumption.
tuning 23. Corrosion/freezer • Angled mast cross bracing Smooth, quiet steering control
• Battery discharge indica- conditioning (freezer with minimal operator effort
conditioning includes a • Angled overhead guard
tor, steer wheel direction cross bars required at the steer tiller. Drive
indicator, OnTrac Traction 5/8” thick power unit skirt tire rotates 190° for maximum
Control indicator with extended coverage of • Variable side stance maneuverability.
the drive and caster tires)
9. High visibility power unit Superior thermal management The optional electronic power
24. ThermoAssist™ freezer is the result of several design steering uses an AC steer mo-
10. High visibility mast comfort package features: reduced heat generating tor and steering control module
11. Overhead guard (“C”, “D” or “E” battery components, positioning of heat integrated with the Access 1 2 3
12. 48” high load backrest compartment) generating components away System to provide fast, reliable
25. Load wheel sizes from the compartment, padding steering response.
13. Tilting fork carriage
and compounds to insulate the compartment from
14. Tandem articulating heat, and improved air paths
load wheels 26. EE rating through the truck.
27. Forward Steering
RR 5700 Series Technical Information
Braking Another useful option is the Rolled steel outer channel masts Other Options
A disc brake on the motor Tilt Position Assist. This allows and inner “I” beams roll on 1. Audible travel alarm
armature shaft combined with the fork tilt to stop at a prepro- canted, steel, anti-friction roller
2. Flashing lights
motor regenerative braking grammed position for maximum bearings for minimal current draw
provides sure braking with fewer fork clearance when entering and long life. Telescoping mast Safety considerations and
parts and maintenance require- pallets. sections nest to reduce truck dangers associated with
ments. The offset, articulated length. Heavier mast cross audible travel alarms and
Also optional, the Capacity Moni- flashing lights include:
drive-unit design improves drive bracing design increases stiff-
tor shows the approximate weight
tire brake force. ness. Above 270” lift, vertical • Multiple alarms and/or lights
on the forks and the fork height.
Regenerative motor braking mast reinforcement maintains can cause confusion.
It will alert the operator when the
helps save energy, and maximum capacity.
truck capacity is exceeded for the • Workers ignore the alarms
decreases motor temperature. fork height. It will also show how Reach Mechanism and/or lights after day-in and
Suspension high or to which lift zone you can Inner arm has a one piece plate day-out exposure.
The offset, articulated drive- raise the load. with continuous welding. Torque
• Operator may transfer the
unit design provides positive plate is also used to give the
Mast responsibility for “looking out”
floor contact. mechanism stiffness to resist
High visibility mast design with to the pedestrians.
twisting for long-lasting dura-
Load Handling angled cross bracing and angled • Annoys operators and
bility. Outer arms are designed
The optional load handling assist overhead guard braces improve pedestrians.
with large heel to provide more
package provides rack height visibility for high or low stacking.
material for stresses to be Other Options Available
select and tilt position assist Crown’s patented staging
distributed evenly. Robotically Contact your local Crown dealer.
features. cushions coupled with lowering
welded for maximum strength.
dampers and speed reductions Dimensions and performance
The Rack Height Select feature al- at maximum lift improve overall Carriage data given may vary due to
lows the truck to be programmed load handling control. A hook-type carriage conform- manufacturing tolerances.
to stop at preselected heights. ing to ITA specifications is used. Performance is based on an
With one-touch of the multi-task Load backrest is standard. average size vehicle and is
trigger while lifting or lowering,
affected by weight, condition of
the mast will stop at the next
truck, how it is equipped and
programmed height.
the conditions of the operating
area. Crown products and
specifications are subject to
change without notice.
You can count on Crown to build lift trucks Because Crown is continually improving its products,
specifications are subject to change without notice.
designed for safe operation, but that’s
only part of the safety equation. Crown Crown, the Crown logo, the color beige, the
Momentum mark, Access 1 2 3, InfoPoint, InfoLink,
encourages safe operating practices through ThermoAssist, OnTrac and Work Assist
ongoing operator training, safety-focused are trademarks of Crown Equipment Corporation.
supervision, maintenance and a safe working Copyright 2009 Crown Equipment Corporation
SF18299 5/09
environment. Go to crown.com and view our
Printed in U.S.A.
safety section to learn more.