Professional Documents
Culture Documents
CASPSS-LEAP-June 2017
CASPSS-LEAP-June 2017
CASPSS-LEAP-June 2017
CFM International’s Proprietary Information : The information contained in this document is CFM International’s Proprietary Information and is disclosed in
confidence. It is the property of CFM International and shall not be used, disclosed to others, or reproduced without the express written consent of CFM International. If
consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or
in part. The information contained in this document may also be controlled by the U.S. export control laws. Unauthorized export or re-export is prohibited.
1
Contents
I. Introduction (definitions)
2
I.
Introduction
(definitions)
3
Introduction
This summary book is prepared for you, our valued customer, as a reference guide to obtain support, service,
and prompt problem resolution from CFM International’s Controls & Accessories and other Suppliers engaged
in providing direct support to you. Please contact these Suppliers directly for all issues of support and service
related to their products. We fully intend to work with you in solving any issues when reasonable efforts to
resolve them directly with the Suppliers are not successful.
This book is arranged in five (5) sections, this section being Section I (“Introduction”). Section II provides a list
of key contacts in case you need CFM International’s assistance on specific matters. Section III provides
highlights of our Product Support Agreement that most of our suppliers either meet or exceed. A list of LRU’s
(Vendor, CAGE or NSCM Code, CMM, P/N, VIN, Nomenclature & Warranties) are provided in section IV for
reference, please refer to IPC for the most current part configuration. Section V includes a complete list of all
Suppliers with their key contact data.
This document is for information only and represents our “best effort” to pull together useful data from all our
suppliers to facilitate and encourage direct and improved communication between all parties concerned. Due to
continuous changes in organizations and other contact information, data contained in this book is very likely to
change over time. We urge you to keep in touch with your Suppliers to maintain current and accurate data.
Please note our intent is not to minimize the role of CFM International’s Customer Support Manager who shall
remain the central focus for overall support issues. Likewise, the assigned CFM International's Field Service
Representative shall continue as your front-line key contact for all CFM International’s support issues.
4
Definitions :
The following definitions shall apply to the terms used in this CASPSS. Any other words, terms and phases used
shall be defined in the context in which used or where applicable.
Aircraft on Ground (AOG) – The highest priority designation to process a requirement for a Spare Part(s) and/or
Maintenance action, indicating that an aircraft is unable to continue or be returned to revenue service until
appropriate action is taken.
Customer – For the purpose of this CASPSS, CUSTOMER is defined as any owner, lessee, or operator of aircraft
where PURCHASER’s engines are installed using SELLER’s PRODUCT. Any subsequent DESIGNEE of such
owner, lessee or operator may also qualify as CUSTOMER.
Double bouncer - Same serial numbered Product, which experiences an unscheduled, justified return to SELLER
and deemed by SELLER as No Fault Found (“NFF”) and then is returned again for the same reason within
twenty-four (24) months, is hereby defined as a “Double bouncer” unit.
Excusable Delay - A delay to contract performance that is beyond the control, fault, or negligence of the
contractor. If a delay is determined to be excusable, Customer cannot initiate a termination for default.
Fault Not Found (FNF) – A PRODUCT which experiences an unscheduled removal for a specific fault, returned
to SELLER and passes SELLER’s incoming inspection and test procedures related to the reported fault.
5
Labor Allowance – Appliers to the removal of PRODUCT from the engine, rework (if applicable) and
reinstallation of PRODUCT or PIECE PARTS thereof when such action is required to comply with a time
compliance SERVICE BULLETIN (SB).
MTBF – Mean Time Between Failures : Performance figures calculated by dividing the total unit operating
hours by the number of Qualified Unscheduled Removals that are confirmed failures that occurred during the
same period.
MTBUR (Fleet Achieved) – Mean Time Between Unscheduled Removals : Performance figures calculated by
dividing the total unit operating hours by the number of Qualified Unscheduled Removals that occurred during
the same period.
No Fault Found (NFF) – A PRODUCT which experiences an unscheduled removal, returned to SELLER and
passes SELLER’s incoming inspection and test procedures.
Parts Credit Allowance - Provided by SELLER to CUSTOMER for REPAIR or replacement of affected
PRODUCT or PIECE PARTS.
Party or Parties – For the purpose of this SPSS PARTY or PARTIES are considered either the PURCHASER
or SELLER or the combination of both.
Product Support Agreement (PSA) – The PRODUCT support agreement, terms and conditions established
between the PURCHASER and SELLER covering both CUSTOMER and PRODUCT support once the
PRODUCT is in the AFTERMARKET. The customer rights contained therein are communicated to
CUSTOMER via the CASPSS.
6
Purchaser – For the purpose of this CASPSS, PURCHASER is CFM International.
Rogue Unit – A same serial numbered PRODUCT, which experiences a minimum of three unscheduled returns
to SELLER for the same cause within the PRODUCT’s new warranties period, are justified through
substantiating data provided by CUSTOMER, and deemed by SELLER as FNF.
Seller – For the purpose of this CASPSS, SELLER is the supplier of PRODUCT. SELLER also includes any
SELLER’s divisions which supply PRODUCT to PURCHASER or CUSTOMER under this CASPSS.
Service Bulletin (SB) – A document issued by the PURCHASER to notify CUSTOMERS of all spare parts
releases and recommended modifications, manpower requirements, implementation instructions, substitution pf
parts, special inspections/checks and conversion from one model to another.
Shop Processing Time (SPT) – The number of days from PRODUCT receipt at SELLER’s facility and/or
SELLER’s authorized repair facility to PRODUCT made available for shipment to PURCHASER, CUSTOMER
and/or CUSTOMER DESIGNEE from SELLER’s facility and/or SELLER’s authorized repair facility excluding
any EXCUSABLE DELAYS.
Supplier(s) – Shall mean the suppliers listed in Section V of the present document, also defined as Seller in this
document.
7
II.
CFM International’s
Aircraft Engines Support Personnel
8
CFM International’s Customer Support
Center (GEAE)
The Suppliers listed in this guide all maintain comprehensive customer support functions and should be your
primary contact when issues or questions arise concerning Controls & Accessory hardware installed on LEAP
series engines.
In the event you are unable to reach the Supplier or require additional assistance, contact the GE Aviation
Aircraft Engines “Fleet support (FS)”. The FS is staffed 24 hours a day, 7 days a week with a team of personnel
who are ready to assist you as needed. The contact information is as follows (by order of preference, 1-4) :
4 - E-mail aviation.fleetsupport@ge.com
9
CFM International’s Customer Support
Center (Safran Aircraft Engines)
The Suppliers listed in this guide all maintain comprehensive customer support functions and should be your
primary contact when issues or questions arise concerning Controls & Accessory hardware installed on LEAP
series engines.
In the event you are unable to reach the Supplier or require additional assistance, contact the LEAP “Customer
Support Center (CSC)”. The CSC is staffed 24 hours a day, 7 days a week with a team of personnel who are ready
to assist you as needed. The contact information is as follows (by order of preference, 1 to 4) :
10
III.
CFM International’s
Product Support Agreement
11
Content
12
1. Spare Parts (Routine order)
13
2. Spares (Imminent AOG + AOG)
if part available, if no stock, answer to be sent within 2h if part available, within if no stock, answer to be sent within
within 24h days hours 4h days 2h hours
All suppliers
• SELLER shall maintain a minimum of one (1) spare, of each listed PSA Product, on shelf to support potential CUSTOMER AOG
needs. In addition, SELLER shall maintain an adequate supply of Product and detail part shelf stock for as long as there are at least
five (5) aircraft in service utilizing the Product covered by this PRODUCT SUPPORT AGREEMENT. Part shelf stock quantities shall
be reviewed and approved by Purchaser quarterly.
• SELLER shall establish lead times for the Product that is consistent with the requirements outlined in the World Airline Suppliers'
Guide as of the Effective Date of this PRODUCT SUPPORT AGREEMENT. In no case shall any catalog lead-time exceed 30 days.
14
3. Repair Remedies
FADEC Alliance,
1% 2%
Woodward
• The SELLER’s warranty … shall apply to new Product or piece parts of the Product, which shall include a 100% credit issued by
SELLER for repair or replacement costs up to 10,000 engine-operating hours and thereafter linearly prorated to a 0% credit at
12,000 hours or five (5) years from date received by CUSTOMER, whichever first occurs. It is the PURCHASER and CUSTOMERS’
responsibility to make a timely warranty claim and to provide the necessary substantiation to the SELLER needed to justify the claim.
(Note: One supplier limits warranty to 10,000 hours with no prorate and one supplier limits warranty to 3.5 years and no hours.)
• SELLER warrants that any Product or parts thereof that are beyond the warranty period that are overhauled at SELLER’s facility will be
free from defects in workmanship for 10,000 unit operating hours or five (5) years, whichever first occurs following the overhaul.
• SELLER warrants that any Product or parts thereof that are beyond the warranty period that are repaired at SELLER’s facility will be free
from defects in workmanship for 10,000 unit operating hours or five (5) years, whichever first occurs following the repair.
• Response Time to Warranty Corrections – SELLER shall provide written disposition of all Products returned for correction within seven
or fourteen (7 or 14) days of receipt of Product. If the claim is accepted, the requested service, return or exchange of the Product shall be
accomplished within the SPT … If the claim is denied or additional investigation is required, written communication shall include a
detailed explanation of the denial or claim status and a price quote for the charge repair within the SPT defined … or request for additional
information. If the SELLER has not provided status or disposition of the correction within twenty-one (21) calendar days of receipt,
the correction shall be deemed to have been accepted by SELLER.
16
5. Double Bouncer / Rogue Unit
Double bouncer Refund NFF Rogue – 3 unscheduled removals Replace with new
Replace Scrap Policy suspended
Vendor : 2 NFF same charges from 1st for same cause, justified via or used
SRAs or rogue for known a/c sys
Name reason, n 24 visit if substantiating data within equivalent at no
components unit or maint issues
months confirmed at 2nd Warranty period cost
ALL
SUPPLIERS
Double Bouncer
• PURCHASER or CUSTOMER’s same serial numbered Product, which experiences an unscheduled, justified return to SELLER and
deemed by SELLER as No Fault Found (NFF) and then is returned again for the same reason within twenty-four (24) months, is
hereby defined as a “Double Bouncer” unit. SELLER shall refund the NFF charges from the first shop visit if the failure is
confirmed during the second shop visit.
Rogue Unit
• PURCHASER or CUSTOMER’s same serial numbered Product, which experiences a minimum of three unscheduled returns to
SELLER for the same cause, and are justified returns through substantiating data provided within the Product’s new warranty period,
and deemed by SELLER as NFF are hereby defined as “Rogue Units”. SELLER shall replace the rogue unit with a new or used
equivalent unit at no cost to the PURCHASER or CUSTOMER. SELLER shall scrap the rogue unit to prevent it from re-entering the
field. In the event there are known aircraft level system or maintenance issues, as mutually acknowledged between PURCHASER and
SELLER, causing NFF removals, this policy shall be suspended until such issues are resolved.
17
6. Reliability Corrective Action
Develop & implement 50% part credit & 50% part credit
Develop corrective FOC loans to preclude FOC loans to
Vendor corrective action within 100% labor credit & 100% labor
action plan within 30 CUSTOMER out of stock support fleet
Name 12 months of during investigative credit for
days of notification as agreed by PARTIES modification
notification period modification
All
• In the event that Product does not meet the fleet in-service reliability requirements, PURCHASER will notify SELLER and SELLER
will perform an investigation to identify the root cause(s) contributing to the Product guarantee shortfall. Within thirty (30) days of
PURCHASER’s notification to SELLER, SELLER will develop corrective plan agreed to by the PARTIES that will result in the
Product achieving its in-service reliability. SELLER shall ensure that corrective action(s) is/are developed and implemented within
(12) months from PURCHASER’s notification unless otherwise agreed to by the PARTIES.
• In addition to the foregoing, SELLER shall, during this investigative period, implement the actions specified below until such time
that the formal corrective action is available to the field :
• SELLER shall provide to PURCHASER and/or PURCHASER’s CUSTOMERS support for repairs or replacement of
Product or specific failure mode causing a reliability and/or delay shortfall as follows: 50% “Parts Credit Allowance” will be
granted by SELLER for Product or piece parts thereof for replacement or repair and 100% “Labor Allowance”. In consideration
of variation in labor rates among the airlines, SELLER reserves the right to negotiate labor allowances.
• Provide additional free-of-charge Product to preclude CUSTOMER out-of-stock situations. The number of such free-of-charge
loan Product will be determined by the PARTIES.
• SELLER shall provide to PURCHASER and/or PURCHASER’s CUSTOMERS support for modifications resulting from the
reliability and/or delay rate corrective action as follows :
• 50% “Parts Credit Allowance” will be granted by SELLER for Product or parts thereof in inventory or removed from service for
replacement or rework/modification.
• 100% “Labor Allowance” will be granted by SELLER for rework/modification (if applicable). In consideration of variation in
labor rates among airlines, SELLER reserves the right to negotiate labor allowances.
• SELLER shall make available to CUSTOMERS free-of-charge loan Product to support the fleet modification.
18
7. Technical Support
It is the policy of PURCHASER to approve and disseminate technical data to its CUSTOMERS for the continuing support of
PURCHASER’s engines in the field in such areas as installation, maintenance, test, repair, and service.
8. Training Support
SELLER shall provide, at no charge and upon request, one session (per CUSTOMER) at SELLER’s facility, of Product familiarization
and operation training to PURCHASER and CUSTOMERS. Airline operators desiring additional training for Product upgrades,
changes, etc., will be charged at the negotiated rates.
SELLER agrees to make available Product familiarization and operation training to authorized service facilities at mutually agreeable
terms and rates.
19
9. Summary
Support Topic Requirement Remedy 1 Remedy 2 Remedy 3
• Routine : Agreed Or Catalog Lead
Proactively offer to customer 1.0% /
Time (30 days max), if part available
day up to 50% Of LRUs negotiated
: shipment within 7 days
or catalog list price
• Critical Emergency or Critical
(one supplier, 0.5% for the 1st 5 days,
Spares Spares (imminent AOG) : answer
then 1%)
within 2h, shipment within 24h if
part available
1 product on shelf (AOG stock)
• AOG : answer within 2h, shipment
within 4h if part available
3% per day for each day of delay
Proactively offer to customer FOC
Standard repair, 1-2% per day credit (of repair thereafter up to a maximum of 50% of the
Rotable (loan/exchange) after
Overhaul and Shop Processing Time (SPT) : 21 days /overhaul invoice) for the total invoice amount prior to discount,
21 days- No Incremental charges
modifications first 10 days of delay begin accruing on the first day
immediately following day 21 of the SPT.
21
Part Number
LEAP-1A Engine Model
22
Please refer to IPC for latest part number
LEAP-1A
CAGE CMM Supplier CFM Part New Parts Warranty
Vendor Country Nomenclature
Code ATA Number P/N Number whichever comes first
Ametek 97424 USA 79-35-05 PD9902-72.5-40072 362-074-510-0 Oil Filter DP Sensor (OFDP) 5 years / 10.000 - 12.000 efh
Ametek 97424 USA 79-32-05 PT9902-261-40077 362-074-311-0 Oil Pressure and Temperature Sensor (EOPT) 5 years / 10.000 - 12.000 efh
Ametek 97424 USA 79-31-05 8TJ146KAC1 362-073-910-0 Oil level Sensor (OLS) 5 years / 10.000 - 12.000 efh
Ametek 12536 USA 79-21-30 72110-00-1 362-078-710-0 Surface Air Cooling Oil Cooler (SACOC) Left 5 years / 10.000 - 12.000 efh
Ametek 12536 USA 79-21-30 72110-00-2 362-074-810-0 Surface Air Cooling Oil Cooler (SACOC) Right 5 years / 10.000 - 12.000 efh
CFM 58828 USA/Fr. 79-36-05 1F9243 362-075-003-0 Air Oil Separator "Lubriclone" 5 years / 10.000 - 12.000 efh
CFM 58828 USA/Fr. 79-36-10 1G9244 362-077-303-0 Oil Debris Monitoring Harness & Sensor 5 years / 10.000 - 12.000 efh
CFM 58828 USA/Fr. 79-36-20 1H9193 362-076-501-0 Oil Debris Monitoring Unit "Signal Conditioner" 5 years / 10.000 - 12.000 efh
CFM 58828 USA/Fr. 79-21-50 KA06030B 362-902-111-0 VFG Non Return Valve (NRV) 5 years / 10.000 - 12.000 efh
CFM 58828 USA/Fr. 75-24-05 AE0406A00 362-094-910-0 EEC Cooling Blower 5 years / 10.000 efh
CFM 58828 USA/Fr. 79-21-05 B1316-05716 362-074-102-0 Lubrification Unit 5 years / 10.000 - 12.000 efh
CFM 58828 USA/Fr. 79-11-05 B1316-05696 362-094-111-0 Oil tank 5 years / 10.000 - 12.000 efh
Crane-Eldec Corporation 08748 USA 73-31-05 9-217-89 2492M62P02 Fuel flow Transmitter 5 years / 10.000 - 12.000 efh
Fadec Alliance 7NDG7 USA 73-21-45 261811055-0303 2474M65P05 Pressure Sub-System (PSS) 5 years / 10.000 efh
115E6331G4 2500M34P05
Fadec Alliance 7NDG7 USA 73-21-55 Electronic Engine Control (EEC) 5 years / 10.000 efh
115E6331G5 2500M34P06
Honeywell 59364 USA 80-11-05 63506083-4 2529M66P04 Air Turbine Starter (ATS) 5 years / 10.000 - 12.000 efh
Honeywell 59364 USA 80-11-15 63216083-2 2496M44P03 Starter Air Valve (SAV) 5 years / 10.000 - 12.000 efh
Honeywell 59364 USA 79-21-45 63292058-2 362-075-502-0 Eductor Valve (EV - Stainless steel) 5 years / 10.000 - 12.000 efh
Honeywell 9X173 USA 73-11-35 82010240-3 362-073-403-0 Fuel Return Valve (FRV) 5 years / 10.000 - 12.000 efh
Honeywell 70210 USA 73-11-50 67200406-2 362-097-502-0 IDG Oil Cooler # FCOC (Fuel Cooled Oil Cooler) 5 years / 10.000 - 12.000 efh
Kulite 34345 USA 73-21-35 APT-483-1250-1615A 2492M61P01 Fuel Manifold Pressure Sensor 3 years & 6 months
Kulite 34345 USA 73-34-05 APT-482-1250-60D 2492M60P01 Fuel Filter Differential Pressure Transducer 3 years & 6 months
Meggitt U6578 England 73-11-20 45731-1420 362-073-102-0 Servo Fuel Heater (SFH) 5 years / 10.000 - 12.000 efh
Meggitt U6578 England 79-21-25 45731-1423 362-072-902-0 Main Oil / Fuel Heat Exchanger "MHX" 5 years / 10.000 - 12.000 efh
Meggitt K0802 England 77-11-05 3222KGBA5 362-044-910-0 N1, Speed Sensor 5 years / 10.000 - 12.000 efh
Meggitt K0802 England 77-11-10 3223KGBA4 362-077-102-0 N2, Speed Sensor 5 years / 10.000 - 12.000 efh
Meggitt S3960 England 73-21-15 0154NF 364-075-610-0 T12, Sensor (T12) 5 years / 10.000 - 12.000 efh
Meggitt S3960 England 73-21-20 0154MW-CLB 362-049-002-0 T25, Sensor (T25) 5 years / 10.000 - 12.000 efh
Meggitt K0802 England 77-21-05 0503KHSA3 362-076-702-0 Exhaust Gas Temperature (T48) Harness Left 5 years / 10.000 - 12.000 efh
Meggitt K0802 England 77-21-05 0504KHSA3 362-076-902-0 Exhaust Gas Temperature (T48) Harness Right 5 years / 10.000 - 12.000 efh
Meggitt K0802 England 77-21-10 5007KTC01 362-024-603-0 Exhaust Gas Temperature (T48) Sensor 5 years / 10.000 - 12.000 efh
Meggitt S3960 Swiss 77-31-05 144-168-000-031 362-076-210-0 Accelerometer TCF or TRF Vibration Sensor 5 years / 10.000 - 12.000 efh
Meggitt S3960 Swiss 77-31-10 144-167-000-121 362-058-610-0 #1 Brg Vibration or FF Vibration Sensor 5 years / 10.000 - 12.000 efh
Meggitt 79318 USA 75-23-10 521285-3 2460M52P08 Modulated Turbine Cooling Valve (Straight) 5 years / 10.000 - 12.000 efh
Meggitt 79318 USA 75-23-11 521425-3 2460M52P07 Modulated Turbine Cooling Valve (Canted) 5 years / 10.000 - 12.000 efh 23
Please refer to IPC for latest part number
LEAP-1A
CAGE CMM Supplier CFM Part New Parts Warranty
Vendor Country Nomenclature
Code ATA Number P/N Number whichever comes first
Unison 83311 USA 73-21-40 504909-1 2122M28P01 Stator / Permanent Magnet Alternator "PMA" 5 years / 10.000 - 12.000 efh
Unison 83311 USA 73-21-40 504910-1 2122M27P01 Rotor / Permanent Magnet Alternator "PMA" 5 years / 10.000 - 12.000 efh
Unison 83311 USA 73-21-30 504243-1 2121M86P01 Fuel Temperature Sensor 5 years / 10.000 - 12.000 efh
Unison 83311 USA 77-22-05 517113-1 2492M43P02 Core Compartment Temp Sensor (CCT Sensor) 5 years / 10.000 - 12.000 efh
Unison 83311 USA 73-21-25 515876-1 2492M59P02 T3, Sensor (T3) 5 years / 10.000 - 12.000 efh
Unison 59501 USA 74-11-05 513610-3 2489M04P03 Ignition, Exciter 1 5 years / 10.000 - 12.000 efh
Unison 59501 USA 74-11-05 513610-4 2489M04P04 Ignition, Exciter 2 5 years / 10.000 - 12.000 efh
Unison 59501 USA 74-21-05 514000-2 2489M03P02 Ignition, Lead (Short) 5 years / 10.000 - 12.000 efh
Unison 59501 USA 74-21-05 513484-2 2548M61P02 Ignition, Lead (Long) 5 years / 10.000 - 12.000 efh
Unison 59501 USA 74-21-10 517212-4 2646M08P02 Igniter 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 75-23-05 8100-0090 2496M36P02 Modulated Turbine Cooling (MTC) Actuator 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 75-21-05 8910-255 2496M40P05 ACC Valve 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 75-22-05 8910-275 2629M63P03 ACC Valve 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 75-33-05 8910-277 2496M38P04 Transient Bleed Air Valve (TBV) 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 75-32-05 8100-0091 2496M37P02 Variable Stator Vane (VSV) Actuator 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 75-11-05 8910-230 2496M42P02 Booster Splitter Anti-Ice Valve (SB / BAIV) 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 75-11-05 8910-276 2496M42P03 Booster Splitter Anti-Ice Valve (SB / BAIV) 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 73-21-10 8062-1151 2496M35P02 Split Unit Control (SCU/SVA) 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 73-21-05 8062-1157 2496M34P04 Fuel Metering Unit (FMU) 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 73-11-10 1326-1136 2496M33P04 Main Fuel Filter (MFF) 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 73-11-05 6970-125 2496M32P05 Main Fuel Pump (MFP) 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 73-11-05 8910-230 2496M42P02 SBV Valve Assy 5 years / 10.000 - 12.000 efh
Woodward 66503 USA 73-31-05 8100-0083 362-035-803-0 VBV Actuator (VBVA) 5 years / 10.000 - 12.000 efh
24
Part Number
LEAP-1B Engine Model
25
Please refer to IPC for latest part number
CFM 58 8 2 8 USA/ Fr. 79 -3 6 -10 1G9 2 0 5 3 6 4 - 0 77- 3 0 2 - 0 Oil D e b ri s M o nit o ring Ha rne s s & S e ns o r 5 years / 10 .0 0 0 - 12 .0 0 0 efh
CFM 58 8 2 8 USA/ Fr. 79 -3 6 -2 0 1H9 2 5 1 3 6 2 -0 76 -50 3 - 0 Oi l D e b ris M o nit o ri ng U ni t "S i g na l C o nd it io ne r" 5 years / 10 .0 0 0 - 12 .0 0 0 efh
F a d e c A l lia nc e 7NDG7 USA 73 -2 1-55 115 E7 19 2 G2 2 4 74 M 6 4 P0 3 El e c t ro nic Eng ine C o nt ro l ( EEC ) 5 years / 10 .0 0 0 efh
26
Please refer to IPC for latest part number
C A GE CMM S u p p lie r C F M P a rt LE A P - 1B N e w P a rt s Wa rra n t y
Ve n d o r C o u n t ry
C o de A TA N um be r P /N N um be r N o m e n c la t u re wh ic h e v e r c o m e s f irs t
M e g g it t K0 8 0 2 Eng land 77-2 1-0 6 0 5 0 9 KHS A 5 3 6 4 -0 76 -70 5-0 Ex ha us t Ga s Te mp e ra t ure ( T4 8 ) Ha rne s s Le f t 5 years / 10 .0 0 0 - 12 .0 0 0 efh
M e g g it t K0 8 0 2 Eng land 77-2 1-0 6 0 5 10 KHS A 5 3 6 4 -0 76 -9 0 5-0 Ex ha us t Ga s Te mp e ra t ure ( T4 8 ) Ha rne s s R i g ht 5 years / 10 .0 0 0 - 12 .0 0 0 efh
28
Left Blank Intentionally
29
Left Blank Intentionally
30
V.
31
Suppliers Listed by CAGE Code
CAGE Code Supplier Name
27515 Advanced Atomization Technologies (AZ - USA)
97424 AMETEK Aerospace & Defense (MA - USA)
12536 AMETEK Aerospace & Defense (NY - USA)
99564 AMETEK Aerospace & Defense (CA - USA)
98391 ARKWIN Industries, Inc. (NY - USA) – LEAP-1C only
58828 CFM International
08748 ELDEC Corp. DBA Crane Aerospace & Electronics (WA - USA)
7NDG7 FADEC Alliance
59364 HONEYWELL International Inc. Phoenix R&O Aftermarket (AZ - USA)
70210 HONEYWELL International Inc. Tulsa R&O Aftermarket (CA - USA)
9X173 HONEYWELL International Inc. Prince Edward Island (Canada)
34345 KULITE Semiconductor Products, Inc. (NJ - USA)
U6578 MEGGITT Control Systems (Birmingham - UK)
S3960 MEGGITT Sensing Systems (Fribourg - Switzerland)
K0802 MEGGITT Sensing Systems (Basingstoke - UK)
95411 MEGGITT Sensing Systems (Orange County, CA - USA)
79318 MEGGITT Control Systems (North Hollywood, Inc. CA - USA)
59501 UNISON Industries, LLC (FL - USA)
83311 UNISON Industries, LLC (NY - USA)
66503 WOODWARD, Inc. - Div. Turbine Systems (IL - USA)
32
V.
33
General Contact Information
Customer Support
AMM Spare Parts Jonathan O’Brien Jonathan.OBrien@parker.com +1 623 872-6603 +1 623 872-8595
Warranty
Technical Support
Kurt Howard kbhoward@parker.com +1 623 872-6841 +1 623 872-8595
& Publications
Website www.advancedatomization.com
36
CFM International
General Contact Information
e-mail Telephone Fax
Customer Support
AOG Hotline
SAE: snecma.csc@snecma.fr
AMM Spare Parts
+ 33 (0)1.64.14.88.66 + 33 (0)1.64.14.84.00
Warranty
Technical Support
GEAE:aviation.fleetsupport@ge.com
& Publications
Website https://mycfmportal.com
38
General Contact Information
Contact Name e-mail Telephone Cell Fax
Matt Floor Matt.Floor@baesystems.com + 1.260-434-5605 - + 1.260-434-5616
Customer
Support emmanuelle.perruzza-
Emmanuelle Perruzza-Aubourg +33 1 58 11 79 31 +33 6 49 08 95 13 + 33 1 58 11 93 18
aubourg2@safrangroup.com
FADEC.csc@safrangroup.com + 1.260-438-5600 - -
AOG Hotline AOG Desk
(Safran location only) + 33 1 64 14 83 31 - -
AMM Spare Aftermarket Asset Team Spares.enginecontrols@baesystems.com + 1.260-438-5600 -
+ 1.260-434-5616
Parts Customer Support Center laurent.charpentier@safrangroup.com +33 1 58 11 92 79 -
Warranty E-mail Box baefwaservctr@baesystems.com - - -
Warranty
Customer Support Center laurent.charpentier@safrangroup.com + 33 1 58 11 92 79 - -
Technical Nathan Bauer nathan.nd.bauer@baesystems.com + 1.260-434-5289 + 1.260-409-6514 -
Support Darrell Coon darrell.h.coon@baesystems.com + 1.607-770-2844 + 1.607-727-0184 -
& Publications Stephane Laidet stephane.laidet@safrangroup.com + 33 1 58 11 92 03 + 33 6 07 94 24 33 -
Honeywell Internal
General Contact Information
Contact Name e-mail Telephone Cell Fax
+1-201 461-0900
Customer Support Joseph Carnevale CustomerService@kulite.com N/A +1-201-461-0990
Ext. 219
AOG Hotline Kellstrom Materials AOG@kellstrommaterials.com +1-847-233-5800 +1-847-233-5800 N/A
Spare Parts EU & China Walter Buser walter.buser@kellstrommaterials.com +1-631-962-1517 N/A N/A
+1-201 461-0900
Warranty & Tech Sup. Andrew McLaren andrewmc@kulite.com N/A +1-201-461-0990
Ext. 294
Website http://www.kulite.com
44