Professional Documents
Culture Documents
TDS-EN-Constrip 2_rev 008-Sep 21
TDS-EN-Constrip 2_rev 008-Sep 21
PROPERTIES DISCLAIMER
Appearance: Milky white liquid Performance data is achieved testing in accordance
Specific Gravity: 0.99 + 0.01kg/litre with International Standards. Testing by others may
result in different results from those published as a
PREPARATION OF USED MOULDS result of external factors such as poor sampling,
Moulds must be free of all foreign matter prior to the incorrect mixing, varying temperatures, curing, crushing
application of Constrip 2. After use the mould should be procedures etc.
immediately washed with clean water to remove any Cormix does not take responsibility nor need to defend
foreign matter. If after washing foreign matter still exits others testing that does not achieve the published data.
use of an industrial detergent and stiff brush followed The user must test the products suitability for the
by through rinsing with clean water if necessary. intended application and purpose. Cormix reserves the
right to change the properties of the product.
APPLICATION Site conditions and differences in materials are such
that no warranty or fitness for a particular purpose, nor
Constrip 2 is ready to use and should be applied by
liability can be inferred from the published data sheet,
spray or roller in a thin, even film. If ponding on mould
written recommendations or from other advise offered.
oil occurs it should be removed by sponge before
mould is used.
CONTACT DETAILS
COVERAGE RATES
Cormix International Limited
35 - 40 m2 per litre depending on type of form-work. 89 Romklao Rd., Sansab, Minburi, Bangkok 10510
Tel. (66 2) 917 3955-8
PACKAGING Fax. (66 2) 917 3959
200 litre drums or 1,000 litre bulks. http://www.cormix.com
E-mail: info@cormix.com
STORAGE & SHELF LIFE
Store in original unopened packaging and in
conventional warehouse away from direct sunlight.
The shelf life is 9 months in original sealed containers.