Professional Documents
Culture Documents
LSG-E SeriesClamping Force 35 ~ 950Togglels乐星注塑机
LSG-E SeriesClamping Force 35 ~ 950Togglels乐星注塑机
LSG-E SeriesClamping Force 35 ~ 950Togglels乐星注塑机
SERIES
Full-Electric Injection Molding Machine
About LS Mtron
LS Mtron, a subsidiary of the LS Group, a conglomerate based in South Korea, employs over 25,000 people and reports annual
revenues exceeding USD 30 billion, with profits around USD 1 billion. The Injection Molding Machines division of LS Mtron (LS
Integrated ONE Solution
IMM) was established in 1969 by the South Korean tech behemoth LG Corporation, known as one of the largest plastic molders Smart Machine for Industry 4.0
globally. Initially created to meet its demand for injection molded parts for their renowned TVs, appliances, electronics, and
other products, LS IMM now manufactures approximately 3,000 machines annually. These machines cater not only to LS and LG- Delivering Value
related companies but also to a global clientele of molders.
Originating with the invention of Korea's first Injection Molding Machines, LS IMM is celebrated for its commitment to quality,
customer service, and rapid delivery times. Leveraging the collective capabilities of the LS Group's companies, LS IMM addresses
several global supply chain challenges. This synergy enables LS IMM to offer custom molding machines to its customers in North
America within just 100 days from casting to shipment, with the possibility of even quicker delivery times from its pre-stocked
inventory.
Tech Center
Overseas Sales Office
INNOVATIVE
TECHNOLOGY PARTNER
1 3
4
5 6
① Rigid Clamping and Injection ② Extended Tie-Bar Distance ③ Extended Daylight Available ④ Dual-Cylinder Nozzle Touch Force ⑤ Increased Injection Volume ⑥ 11.811in/sec (300mm/sec) Injection Speed
Units (90~440Ton) (90~440 Ton) • Maintain Platen Parallelism • 13% - 27% Increase Compared to • S
trong & Quick AC Servo Motor
• Minimizes Platen Distortion • Standard Wide Platens • Versatile Mold Spacing • Avoid Resin Leaks Previous Models • F
ast Response Time & Increased Speed Control Accuracy
- Improve Uniform Pressure Distribution - Run Bigger Molds in Lower Tonnage
IMM
⑥ Pressure/Speed Priority Option
- Customizable to the Product Being Made
- Pressure Priority Option (Thick-Wall or Cosmetic Parts)
- Speed Priority Option (Thin-Wall Parts)
LS FULL-ELECTRIC INJECTION
MOLDING MACHINE
Series
the best solution for your injection
molding manufacturing
Realize whatever design you want with our high precision technology to meet the customer’s
Provide your end users with high-class value instead of just products.
Provides Maximum Efficiency Through Optimized Able to Handle Various Mold Sizes
5-Point Toggle Design with FEA •Largest In Class: Tie-Bar Distance / Mold Height
Wider Platens
•Improves Productivity
• 5-Point Toggle High-Speed Clamping Unit and High intensity injection mechanism
•H
igh-Speed Injection through High-Response High-Torque Servo Motors
LS Plasticizing
• Part Mass
Mold Build
Full-Electric Close Tonnage Cooling
(Individual/ Cycle Time
Simultaneous 20% ↓
Motion) Injection/
Pressure Mold
Holding
Release Open
Pressure
Injection During Pressure release Mold Opening • Motor Power(W)
Tonnage Buildup before cooling During
Energy
Plasticizing
Consumption • Heating Power(W)
Eject • Energy Per shot
Ejection During Mold
Open
H
igh-Output and Quick-ResponseAC Servo Motors
transformation.
The solution starts with accurate data collection, transforming this data into meaningful information, and using
data processing technology to improve processes through intelligent applications of AI.
Smart Monitoring 24/7 Mobile Access From Anywhere
Smart Production Control Real-Time Monitoring Control
Smart Mold Recongnition RFID check and Immediate Upload of Molding Parameters via QR Code
Smart Equipment Control Real-time Monitoring
Smart Data interface Data Transfer to Customer Monitoring Systems
AI
AI Injection System
AI Molding Assistant
AI Weight Control
Smart Injection Molding Machine
Calculation Information:
•Operating Hours: 7200h/year
•Water Fee : 0.34 USD/ton
•Oil price : 1.61 USD/ℓ (단위(단위
(단위
: 천원)
: :천원)
천원)
1,702
1,702
1,702
Data 1,611
1,820
1,820
1,820
40.4
45.745.7
45.7 42.1
47.647.6
47.6
1,506
1,611 33.533.5
33.5
15,109 28.1
31.831.8
31.8
23.726.8
26.8 26.8
29.6
21,1
23.823.8
23.8 17.820.1
20.1 20.1
11.913.4
13.4 13.4
369 14.1
15.915.9
15.9
5.9
6.7 6.7
6.7
5,558 15,857 10,957 Year
1년 1년11년 Year
2년 22년
2년 Year 33년 Year
3년 3년 4년44년
4년 Year
5년 55년
5년
LS전동
LS전동
LS전동 하이브리드
하이브리드
하이브리드 유압일반
유압일반
유압일반
LSLSElectric
전동식 HYD
유압식일반 HYBRID
하이브리드
LS Electric HYBRID HYD
(단위 : 백만원)
98.8
16 | LS Injection Molding Machines LS Mtron | 17
79.3
70.4
59.9 56.3
Full-Electric Injection Molding Machine
Screw Type A B Y A B Y A B Y A B Y A B Y A B Y A B Y A B Y A B
in 0.63 0.71 0.71 0.79 0.87 0.87 0.98 1.10 0.71 0.79 0.87 0.87 0.98 1.10 0.98 1.10 1.26 0.87 0.98 1.10 0.98 1.10 1.26 1.10 1.26 1.42
Screw Diameter
mm 16 18 18 20 22 22 25 28 18 20 22 22 25 28 25 28 32 22 25 28 25 28 32 28 32 36
Screw Stroke in 2.28 2.28 3.27 3.27 3.27 4.25 4.65 4.65 3.27 3.27 3.27 4.25 4.65 4.65 5.43 5.43 5.43 4.25 4.65 4.65 5.43 5.43 5.43 5.43 6.22 6.22
in³ 0.71 0.90 1.29 1.59 1.93 2.51 3.53 4.43 1.29 1.59 1.93 2.51 3.53 4.43 4.13 5.19 6.77 2.51 3.53 4.43 4.13 5.19 6.77 5.19 7.75 9.81
Calculated Injection
Volume
cm³ 11.66 14.76 21.12 26.08 31.55 41.05 57.92 72.66 21.12 26.08 31.55 41.05 57.92 72.66 67.74 84.97 110.99 41.05 57.92 72.66 67.74 84.97 110.99 84.97 127.07 160.82
oz 0.39 0.49 0.67 0.85 1.02 1.34 1.87 2.36 0.67 0.85 1.02 1.34 1.87 2.36 2.19 2.75 3.60 1.34 1.87 2.36 2.19 2.75 3.60 2.75 4.13 5.22
Injection
PS
Capacity
g 10.73 13.58 19.43 23.99 29.03 37.77 53.29 66.85 19.43 23.99 29.03 37.77 53.29 66.85 62.32 78.18 102.11 37.77 53.29 66.85 62.32 78.18 102.11 78.18 116.91 147.96
Injection Unit
Psi 38,403 30,338 35,132 28,447 23,469 36,696 28,447 27,167 35,132 28,447 23,469 36,696 28,447 27,167 35,701 28,447 21,762 36,696 28,447 27,167 35,701 28,447 21,762 34,278 26,313 20,766
Injection Pressure
Mpa 265 209 242 196 162 253 196 187 242 196 162 253 196 187 246 196 150 253 196 187 246 196 150 236 181 143
Psi 30,722 24,271 28,105 22,757 18,775 29,357 22,757 21,733 28,105 22,757 18,775 29,357 22,757 21,733 28,560 22,757 17,409 29,357 22,757 21,733 28,560 22,757 17,409 27,423 21,051 16,613
Holding Pressure
Mpa 212 167 194 157 129 202 157 150 194 157 129 202 157 150 197 157 120 202 157 150 197 157 120 189 145 115
Injection Rate in³/sec 6.13 7.76 7.76 9.59 11.60 6.96 8.99 11.27 7.76 9.59 11.60 6.96 8.99 11.27 8.99 11.27 14.72 6.96 8.99 11.27 8.99 11.27 14.72 11.27 14.72 18.63
STDA
Injection Speed in/sec 19.69 19.69 11.81 19.69 11.81 11.81 11.81 11.81 11.81
Injection Rate in³/sec 11.60 14.98 18.79 11.60 14.98 18.79 14.98 18.79 24.54 11.60 14.98 18.79 14.98 18.79 24.54 18.79 24.54 31.06
High
Speed
Injection Speed in/sec 19.69 19.69 19.69 19.69 19.69 19.69
oz/sec 0.13 0.17 0.17 0.22 0.29 0.29 0.43 0.56 0.17 0.22 0.29 0.29 0.43 0.56 0.34 0.45 0.68 0.29 0.43 0.56 0.34 0.45 0.68 0.45 0.68 0.95
Plasticizing
PS
Capacity
g/sec 3.7 4.8 4.8 6.3 8.2 8.2 12.1 16.0 4.8 6.3 8.2 8.2 12.1 16.0 9.7 12.8 19.2 8.2 12.1 16.0 9.7 12.8 19.2 12.8 19.2 27.0
Screw Speed rpm ~500 ~500 ~500 ~500 ~500 ~400 ~500 ~400 ~400
(H x V)
mm 380 x 400 470 x 480 615 x 555
Ejector Force US Ton (kN) 0.88 (7.85) 2.2 (19.61) 2.2 (19.61)
Barrel Heating Capacity kW 3.0 3.0 3.0 3.4 3.7 3.7 5.7 6.4 3.0 3.4 3.7 3.7 5.7 6.4 5.7 6.4 8.2 3.7 5.7 6.4 5.7 6.4 8.2 6.4 8.2 9.1
STDA 10.2 10.2 10.2 10.4 10.6 10.6 11.6 11.9 12.2 12.4 12.6 12.6 13.6 13.9 13.6 13.9 14.8 20.1 21.1 21.4 21.1 21.4 22.3 21.4 22.3 22.8
Electrical
kVA
Capacity High
24.7 24.7 24.7 24.9 25.1 25.1 26.1 26.4 34.7 34.9 35.1 35.1 36.1 36.4 36.1 36.4 37.3 35.1 36.1 36.4 36.1 36.4 37.3 36.4 37.3 37.8
Speed
General
ft 11.25 x 3.08 x 4.72 12.43 x 3.44 x 4.95 14.01 x 3.67 x 5.35 15.65 x 3.67 x 5.35
Machine Dimensions
(L x W x H)
m 3.43 x 0.94 x 1.44 3.79 x 1.05 x 1.51 4.27 x 1.12 x 1.63 4.77 x 1.12 x 1.63
US Ton (TTL) 2.4 2.6 2.9 3.1 3.3 4.2 4.4 4.6
Machine Weight
Ton (TTL) 2.2 2.4 2.6 2.8 3.0 3.8 4.0 4.2
in 0.87 0.98 1.10 0.98 1.10 1.26 0.87 0.98 1.10 1.26 1.42 1.26 1.42 1.57 0.98 1.10 1.26 1.10 1.26 1.42 1.10 1.26 1.42 1.57 1.77 1.42 1.57 1.77 1.10 1.26 1.42 1.26 1.42 1.57 1.26 1.42 1.57 1.77 1.57 1.77 1.97 1.97 2.17 2.36
Screw Diameter
mm 22 25 28 25 28 32 22 25 28 32 36 32 36 40 25 28 32 28 32 36 28 32 36 40 45 36 40 45 28 32 36 32 36 40 32 36 40 45 40 45 50 50 55 60
Screw Stroke in 4.25 4.65 4.65 5.43 5.43 5.43 4.25 5.43 5.43 6.22 6.22 6.22 7.01 7.01 5.43 5.43 5.43 5.43 6.22 6.22 5.43 6.22 7.01 7.01 7.01 7.01 8.58 8.58 5.43 6.22 6.22 6.22 7.01 7.01 6.22 7.01 8.58 8.58 9.37 9.37 9.37 10.47 10.47 10.47
in³ 2.51 3.53 4.43 4.13 5.19 6.77 2.51 4.13 5.19 7.75 9.81 7.75 11.06 13.65 4.13 5.19 6.77 5.19 7.75 9.81 5.19 7.75 11.06 13.65 17.28 11.06 16.72 21.16 5.19 7.75 9.81 7.75 11.06 13.65 7.75 11.06 16.72 21.16 18.25 23.10 28.52 33.31 40.30 47.97
Calculated Injection
Volume
cm³ 41.05 57.92 72.66 67.74 84.97 110.99 41.05 67.74 84.97 127.07 160.82 127.07 181.18223.68 67.74 84.97 110.99 84.97 127.07 160.82 84.97 127.07 181.18 223.68 283.10 181.18 273.95 346.71 84.97 127.07 160.82 127.07 181.18 223.68 127.07 181.18 273.95 346.71 299.08 378.52 467.31 545.85 660.48 786.03
oz 1.34 1.87 2.36 2.19 2.75 3.60 1.34 2.19 2.75 4.13 5.22 4.13 5.89 7.27 2.19 2.75 3.60 2.75 4.13 5.22 2.75 4.13 5.89 7.27 9.17 5.89 8.89 11.25 2.75 4.13 5.89 4.13 5.89 7.27 4.13 5.89 8.89 11.25 9.70 12.28 15.17 17.71 21.45 25.68
Injection
PS
Capacity
g 37.77 53.29 66.85 62.32 78.18 102.11 37.77 62.32 78.18 116.91 147.96 116.91 166.69205.79 62.32 78.18 102.11 78.18 116.91 147.96 78.18 116.91 166.69 205.79 260.45 166.69 252.03 318.98 78.18 116.91 147.96 116.91 166.69 205.79 116.91 166.69 252.03 318.98 275.15 348.24 429.93 502.18 607.64 723.14
Injection Unit
Psi 36,69628,447 27,167 35,701 28,447 21,762 42,670 39,825 34,278 26,313 20,766 35,132 27,73622,473 35,70128,447 21,762 34,278 26,313 20,766 35,132 35,132 27,736 22,473 23,611 36,838 29,869 23,611 34,278 26,313 20,766 35,132 27,736 22,473 42,670 36,838 29,869 23,611 39,825 32,003 26,313 35,558 29,869 24,891
Injection Pressure
Mpa 253 196 187 246 196 150 294 275 236 181 143 242 191 155 246 196 150 236 181 143 242 242 191 155 163 254 206 163 236 181 143 242 191 155 294 254 206 163 275 221 181 245 206 172
Psi 29,35722,757 21,733 28,560 22,757 17,409 34,136 31,860 27,423 21,051 16,613 28,105 22,18817,978 28,56022,757 17,409 27,423 21,051 16,613 28,105 28,105 22,188 17,978 18,889 29,471 23,895 18,889 27,423 21,051 16,613 28,105 22,188 17,978 34,136 29,471 23,895 18,889 31,860 25,602 21,051 28,447 23,895 19,913
Holding Pressure
Mpa 202 157 150 197 157 120 235 220 189 145 115 194 153 124 197 157 120 189 145 115 194 194 153 124 130 203 165 130 189 145 115 194 153 124 235 203 165 130 220 177 145 196 165 137
Injection Rate in³/sec 6.96 8.99 11.27 8.99 11.27 14.72 6.96 8.99 11.27 14.72 18.63 14.72 18.63 23.01 8.99 11.27 14.72 11.27 14.72 18.63 11.27 14.72 18.63 23.01 18.63 23.01 29.12 11.27 14.72 18.63 14.72 18.63 23.01 14.72 18.63 23.01 29.12 23.01 29.12 35.95 23.96 29.00 34.51
STDA
Injection Speed in/sec 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 7.87
Injection Rate in³/sec 11.60 14.98 18.79 14.98 18.79 24.54 11.60 14.98 18.79 24.54 31.06 24.54 31.06 38.34 14.98 18.79 24.54 18.79 24.54 31.06 18.79 24.54 31.06 38.34 48.53 31.06 38.34 48.53 18.79 24.54 31.06 0.00 0.00 0.00 24.54 31.06 38.34 48.53 38.34 48.53 59.91 35.95 43.49 51.76
High
Speed
Injection Speed in/sec 19.69 19.69 19.69 19.69 19.69 19.69 19.69 19.69 19.69 19.69 19.69 11.81
oz/sec 0.29 0.43 0.56 0.34 0.45 0.68 0.23 0.34 0.45 0.68 0.95 0.59 0.83 1.11 0.34 0.45 0.68 0.45 0.68 0.95 0.40 0.59 0.83 1.11 1.53 0.71 0.95 1.31 0.45 0.68 0.95 0.59 0.83 1.11 0.51 0.71 0.95 1.55 0.79 1.29 1.44 1.44 1.93 2.37
Plasticizing
PS
Capacity
g/sec 8.2 12.1 16.0 9.7 12.8 19.2 6.5 9.7 12.8 19.2 27.0 16.8 23.6 31.5 9.7 12.8 19.2 12.8 19.2 27.0 11.2 16.8 23.6 31.5 43.3 20.3 27.0 37.2 12.8 19.2 0.95 16.8 23.6 31.5 14.4 20.3 27.0 44.0 22.5 36.7 40.9 40.9 54.8 67.1
Screw Speed rpm ~500 ~400 ~400 ~350 ~400 ~400 ~350 ~300 ~400 ~300 ~250 ~250
Clamping Force US Ton (kN) 121 (1,080) 187 (1,666) 243 (2,156)
(H x V)
mm 680 x 630 840 x 790 920 x 920
Ejector Force US Ton (kN) 2.76 (24.52) 3.86 (34.32) 5.51 (45.11)
Barrel Heating Capacity kW 3.7 5.7 6.4 5.7 6.4 8.2 3.7 5.7 6.4 8.2 9.1 8.2 9.1 13.3 5.7 6.4 8.2 6.4 8.2 9.1 6.4 8.2 9.1 13.3 13.3 9.1 13.3 15.1 6.4 8.2 9.1 8.2 9.1 13.3 8.2 9.1 13.3 15.1 13.3 15.1 16.3 16.3 18.5 20.3
STDA 20.1 21.1 21.4 21.1 21.4 22.3 20.1 21.1 21.4 22.3 22.8 22.3 22.8 24.9 28.1 28.4 29.3 28.4 29.3 29.8 28.4 29.3 29.8 31.9 31.9 29.8 31.9 32.8 36.4 37.3 37.8 37.3 37.8 39.9 37.3 37.8 39.9 40.8 39.9 40.8 41.4 41.4 42.5 43.4
Electrical
kVA
Capacity High
35.1 36.1 36.4 36.1 36.4 37.3 35.1 36.1 36.4 37.3 37.8 37.3 37.8 39.9 66.1 66.4 67.3 66.4 67.3 67.8 66.4 67.3 67.8 69.9 69.9 67.8 69.9 70.8 66.4 67.3 67.8 67.3 67.8 69.9 67.3 67.8 69.9 70.8 69.9 70.8 71.4 71.4 72.5 73.4
Speed
General
ft 16.14 x 4.13 x 5.54 16.8 x 4.13 x 5.54 17.78 x 4.72 x 6.07 19.13 x 4.72 x 6.07 20.6 x 5.22 x 6.56 22.52 x 5.22 x 6.56 22.51 x 5.22 x 6.56
Machine Dimensions
(L x W x H)
m 4.92 x 1.26 x 1.69 5.12 x 1.26 x 1.69 5.42 x 1.44 x 1.85 5.83 x 1.44 x 1.85 6.28 x 1.59 x 2.00 6.56 x 1.59 x 2.00 6.86 x 1.59 x 2.00
US Ton (TTL) 5.6 5.8 6.1 6.3 7.8 8.0 8.3 8.5 11.1 11.4 11.6 11.7 11.9
Machine Weight
Ton (TTL) 5.1 5.3 5.5 5.7 7.1 7.3 7.5 7.7 10.1 10.3 10.5 10.6 10.8
Screw Type Y A B Y A B Y A B C Y A B Y A B Y A B Y A B Y A B Y A B C Y A B Y A B Y A B C
in 1.26 1.42 1.57 1.42 1.57 1.77 1.57 1.77 1.97 2.17 1.97 2.17 2.36 2.17 2.36 2.56 1.42 1.57 1.77 1.57 1.77 1.97 1.97 2.17 2.36 2.17 2.36 2.56 2.76 1.57 1.77 1.97 1.97 2.17 2.36 2.17 2.36 2.56 2.76
Screw Diameter
mm 32 36 40 36 40 45 40 45 50 55 50 55 60 55 60 65 36 40 45 40 45 50 50 55 60 55 60 65 70 40 45 50 50 55 60 55 60 65 70
Screw Stroke in 6.22 7.01 7.01 7.01 8.58 8.58 9.37 9.37 9.37 9.37 10.47 10.47 10.47 10.55 10.55 10.55 7.01 8.58 8.58 9.37 9.37 9.37 10.47 10.47 10.47 10.55 10.55 10.55 10.55 9.37 9.37 9.37 10.47 10.47 10.47 10.55 10.55 10.55 10.55
in³ 7.75 11.06 13.65 11.06 16.72 21.16 18.25 23.10 28.52 34.51 31.87 38.57 45.90 38.86 46.24 54.27 11.06 16.72 21.16 18.25 23.10 28.52 31.87 38.57 45.90 38.86 46.24 54.27 62.94 18.25 23.10 28.52 31.87 38.57 45.90 38.86 46.24 54.27 62.94
Calculated Injection
Volume
cm³ 127.07 181.18 223.68 181.18 273.95 346.71 299.08 378.52 467.31 565.45 522.29 631.97 752.10 636.72 757.75 889.31 181.18 273.95 346.71 299.08 378.52 467.31 522.29 631.97 752.10 636.72 757.75 889.31 1,031.38 299.08 378.52 467.31 522.29 631.97 752.10 636.72 757.75 889.31 1,031.38
oz 4.13 5.89 7.27 5.89 8.89 11.25 9.70 12.28 15.17 18.34 16.97 20.49 24.41 20.67 24.59 28.85 5.89 8.89 11.25 9.70 12.28 15.17 16.97 20.49 24.41 20.67 24.59 28.85 33.47 9.70 12.28 15.17 16.97 20.49 24.41 20.67 24.59 28.85 33.47
Injection
PS
Capacity
g 116.91 166.69 205.79 166.69 252.03 318.98 275.15 348.24 429.93 520.21 480.51 581.41 691.93 585.78 697.13 818.16 166.69 252.03 318.98 275.15 348.24 429.93 480.51 581.41 691.93 585.78 697.13 818.16 948.87 275.15 348.24 429.93 480.51 581.41 691.93 585.78 697.13 818.16 948.87
Injection Unit
Psi 35,132 27,736 22,473 36,838 29,869 23,611 39,825 32,003 26,313 23,469 35,558 29,869 24,891 36,981 31,291 26,313 36,838 29,869 23,611 39,825 32,003 26,313 35,558 29,869 24,891 36,981 31,291 26,313 21,335 39,825 32,003 26,313 35,558 29,869 24,891 36,981 31,291 26,313 21,335
Injection Pressure
Mpa 242 191 155 254 206 163 275 221 181 162 245 206 172 255 216 181 254 206 163 275 221 181 245 206 172 255 216 181 147 275 221 181 245 206 172 255 216 181 147
Psi 28,105 22,188 17,978 29,471 23,895 18,889 31,860 25,602 21,051 18,775 28,447 23,895 19,913 29,585 25,033 21,051 29,471 23,895 18,889 31,860 25,602 21,051 28,447 23,895 19,913 29,585 25,033 21,051 17,068 31,860 25,602 21,051 28,447 23,895 19,913 29,585 25,033 21,051 17,068
Holding Pressure
Mpa 194 153 124 203 165 130 220 177 145 129 196 165 137 204 173 145 203 165 130 220 177 145 196 165 137 204 173 145 118 220 177 145 196 165 137 204 173 145 118
Injection Rate in³/sec 14.72 18.63 23.01 18.63 23.01 29.12 23.01 29.12 35.95 43.49 23.96 29.00 34.51 24.65 29.33 34.42 18.63 23.01 29.12 23.01 29.12 35.95 23.96 29.00 34.51 24.65 29.33 34.42 23.01 29.12 35.95 23.96 29.00 34.51 24.65 29.33 34.42
STDA
Injection Speed in/sec 11.81 11.81 11.81 7.87 6.69 11.81 11.81 7.87 6.69 11.81 7.87 6.69
Injection Rate in³/sec 24.54 31.06 38.34 31.06 38.34 48.53 38.34 48.53 59.91 72.49 35.95 43.49 51.76 43.49 51.76 60.75 31.06 38.34 48.53 38.34 48.53 59.91 35.95 43.49 51.76 43.49 51.76 60.75 38.34 48.53 59.91 35.95 43.49 51.76 43.49 51.76 60.75
High
Speed
Injection Speed in/sec 19.69 19.69 19.69 11.81 11.81 19.69 19.69 11.81 11.81 19.69 11.81 11.81
oz/sec 0.59 0.83 1.11 0.71 0.95 1.55 0.79 1.29 1.44 1.93 1.44 1.93 2.37 1.70 2.08 2.54 0.71 0.95 1.55 0.79 1.29 1.44 1.44 1.93 2.37 1.70 2.08 2.54 3.18 0.79 1.29 1.44 1.44 1.93 2.37 1.70 2.08 2.54 3.18
Plasticizing
PS
Capacity
g/sec 16.8 23.6 31.5 20.3 27.0 44.0 22.5 36.7 40.9 54.8 40.9 54.8 67.1 48.3 59.0 72.1 20.3 27.0 44.0 22.5 36.7 40.9 40.9 54.8 67.1 48.3 59.0 72.1 90.3 22.5 36.7 40.9 40.9 54.8 67.1 48.3 59.0 72.1 90.3
Screw Speed rpm ~350 ~300 ~250 ~250 ~220 ~300 ~250 ~250 ~220 ~250 ~250 ~220
Clamping Force US Ton (kN) 309 (2,744) 386 (3,430) 441 (3,927)
(H x V)
mm 1,040 x 1,040 1,150 x 1,150 1,150 x 1,150
Ejector Force US Ton (kN) 6.83 (45.11) 6.83 (60.8) 8.82 (78.45)
Barrel Heating Capacity kW 8.2 9.1 13.3 9.1 13.3 15.1 13.3 15.1 16.3 18.5 16.3 18.5 20.3 22.3 9.1 13.3 15.1 13.3 15.1 16.3 16.3 18.5 20.3 22.3 28.1 13.3 15.1 16.3 16.3 18.5 20.3 22.3 28.1
STDA 52.3 52.8 54.9 52.8 54.9 55.8 54.9 55.8 56.4 57.5 56.4 57.5 58.4 59.4 59.4 59.4 62.8 64.9 65.8 64.9 65.8 66.4 66.4 67.5 68.4 69.4 69.4 69.4 72.3 64.9 65.8 66.4 66.4 67.5 68.4 69.4 69.4 69.4 72.3
Electrical
kVA
Capacity High
115.3 115.8 117.9 115.8 117.9 118.8 117.9 118.8 119.4 120.5 119.4 120.5 121.4 122.4 122.4 122.4 167.8 169.9 170.8 169.9 170.8 171.4 171.4 172.5 173.4 174.4 174.4 174.4 177.3 169.9 170.8 171.4 171.4 172.5 173.4 174.4 174.4 174.4 177.3
Speed
General
ft 22.57 x 5.77 x 6.89 23.16 x 5.77 x 6.89 24.44 x 6.1 x 7.25 24.44 x 6.1 x 7.25
Machine Dimensions
(L x W x H)
m 6.88 x 1.76 x 2.10 7.06 x 1.76 x 2.10 7.56 x 1.86 x 2.21 7.56 x 1.86 x 2.21
US Ton (TTL) 15.5 15.8 16.0 16.2 16.4 18.8 19.1 19.3 19.5 19.1 19.3 19.5
Machine Weight
Ton (TTL) 14.1 14.3 14.5 14.7 14.9 17.1 17.3 17.5 17.7 17.3 17.5 17.7
Screw Type Y A B C Y A B Y A B C Y A B Y A B C Y A B Y A B C Y A B Y A B Y A B C Y A B Y A B
in 2.17 2.36 2.56 2.76 2.56 2.76 3.15 2.76 2.95 3.35 3.54 2.56 2.76 3.15 2.76 2.95 3.35 3.54 3.35 3.54 3.94 2.76 2.95 3.35 3.54 3.35 3.54 3.94 3.94 4.13 4.53 2.76 2.95 3.35 3.54 3.35 3.54 3.94 3.94 4.13 4.53
Screw Diameter
mm 55 60 65 70 65 70 80 70 75 85 90 65 70 80 70 75 85 90 85 90 100 70 75 85 90 85 90 100 100 105 115 70 75 85 90 85 90 100 100 105 115
Screw Stroke in 10.55 10.55 10.55 10.55 15.16 15.16 15.16 16.54 16.54 16.54 16.54 15.16 15.16 15.16 16.54 16.54 16.54 16.54 19.69 19.69 19.69 16.54 16.54 16.54 16.54 19.69 19.69 19.69 20.87 20.87 20.87 16.54 16.54 16.54 16.54 19.69 19.69 19.69 20.87 20.87 20.87
in³ 38.86 46.24 54.27 62.94 77.96 90.42 118.09 98.64 113.23 145.44 163.05 77.96 90.42 118.09 98.64 113.23 145.44 163.05 173.14 194.11 239.64 98.64 113.23 145.44 163.05 173.14 194.11 239.64 254.02 280.05 335.94 98.64 113.23 145.44 163.05 173.14 194.11 239.64 254.02 280.05 335.94
Calculated Injection
Volume
cm³ 636.72 757.75 889.31 1,031.38 1,277.55 1,481.65 1,935.22 1,616.35 1,855.50 2,383.29 2,671.92 1,277.551,481.65 1,935.22 1,616.35 1,855.50 2,383.29 2,671.92 2,837.25 3,180.863,926.99 1,616.351,855.50 2,383.29 2,671.92 2,837.25 3,180.86 3,926.99 4,162.61 4,589.285,505.05 1,616.351,855.50 2,383.29 2,671.92 2,837.25 3,180.86 3,926.99 4,162.61 4,589.28 5,505.05
oz 20.67 24.59 28.85 33.47 41.45 48.08 62.79 52.45 60.21 77.36 87.66 41.45 48.08 62.79 52.45 60.21 77.36 87.66 92.07 103.21 127.44 52.45 60.21 77.36 87.66 92.07 103.21 127.44 135.10 148.93 178.66 52.45 60.21 77.36 87.66 92.07 103.21 127.44 135.10 148.93 178.66
Injection
PS
Capacity
g 585.78 697.13 818.16 948.87 1,175.34 1,363.12 1,780.40 1,487.04 1,707.06 2,192.63 2,458.17 1,175.341,363.12 1,780.40 1,487.04 1,707.06 2,192.63 2,458.17 2,610.27 2,926.393,612.83 1,487.041,707.06 2,192.63 2,458.17 2,610.27 2,926.39 3,612.83 3,829.60 4,222.135,064.65 1,487.041,707.06 2,192.63 2,458.17 2,610.27 2,926.39 3,612.83 3,829.60 4,222.13 5,064.65
Injection Unit
Psi 36,981 31,291 26,313 21,335 30,580 26,598 20,339 32,714 28,447 22,757 24,180 30,580 26,598 20,339 32,714 28,447 22,757 24,180 32,714 28,447 22,757 32,714 28,447 22,757 24,180 32,714 28,447 22,757 28,447 25,602 21,335 32,714 28,447 22,757 24,180 32,714 28,447 22,757 28,447 25,602 21,335
Injection Pressure
Mpa 255 216 181 147 211 183 140 226 196 157 167 211 183 140 226 196 157 167 226 196 157 226 196 157 167 226 196 157 196 177 147 226 196 157 167 226 196 157 196 177 147
Psi 29,585 25,033 21,051 17,068 24,464 21,278 16,272 26,171 22,757 18,206 19,344 24,464 21,278 16,272 26,171 22,757 18,206 19,344 26,171 22,757 18,206 26,171 22,757 18,206 19,344 26,171 22,757 18,206 22,757 20,482 17,068 26,171 22,757 18,206 19,344 26,171 22,757 18,206 22,757 20,482 17,068
Holding Pressure
Mpa 204 173 145 118 169 147 112 180 157 126 133 169 147 112 180 157 126 133 180 157 126 180 157 126 133 180 157 126 157 141 118 180 157 126 133 180 157 126 157 141 118
Injection Rate in³/sec 24.65 29.33 34.42 32.40 37.58 49.08 37.58 43.14 55.40 32.40 37.58 49.08 37.58 43.14 55.40 69.26 77.64 95.86 37.58 43.14 55.40 69.26 77.64 95.86 95.86 105.68126.77 37.58 43.14 55.40 69.26 77.64 95.86 95.86 105.68 126.77
STDA
Injection Speed in/sec 6.69 6.30 6.30 6.30 6.30 7.87 6.30 7.87 7.87 6.30 7.87 7.87
Injection Rate in³/sec 43.49 51.76 60.75 50.62 58.71 76.68 58.71 67.40 86.57 50.62 58.71 76.68 58.71 67.40 86.57 58.71 67.40 86.57 58.71 67.40 86.57
High
Speed
Injection Speed in/sec 11.81 9.84 9.84 9.84 9.84 9.84 9.84
oz/sec 1.70 2.08 2.54 3.18 2.31 2.89 4.06 2.89 3.44 4.74 5.72 2.31 2.89 4.06 2.89 3.44 4.74 5.72 3.55 4.29 5.40 2.89 3.44 4.74 5.72 3.55 4.29 5.40 5.40 6.20 7.86 2.89 3.44 4.74 5.72 3.55 4.29 5.40 5.40 6.20 7.86
Plasticizing
PS
Capacity
g/sec 48.3 59.0 72.1 90.3 65.6 82.1 115.0 82.1 97.7 134.3 162.1 65.6 82.1 115.0 82.1 97.7 134.3 162.1 100.7 121.6 153.2 82.1 97.7 134.3 162.1 100.7 121.6 153.2 153.2 175.6 222.8 82.1 97.7 134.3 162.1 100.7 121.6 153.2 153.2 175.6 222.8
Screw Speed rpm ~220 ~200 ~200 ~200 ~200 ~150 ~200 ~150 ~150 ~200 ~150 ~150
Clamping Force US Ton (kN) 496 (4,420) 606 (5,390) 717 (6,374) 937 (8,336)
(H x V)
mm 1270 x 1270 1,400 x 1,400 1,500 x 1,400 1,870 x 1,670
Daylight in (mm) 62.01 (1575) 66.93 (1700) 82.68 (2100) 98.43 (2500)
Min in (mm) 13.7 (350) 15.7 (400) 17.7 (450) 19.6 (500)
Mold Height
Max in (mm) 29.5 (750) 31.5 (800) 43.3 (1100) 51.2 (1300)
Ejector Force US Ton (kN) 11.0 (98.07) 14.3 (127.49) 19.8 (176.52) 26.4 (235.36)
Ejector Stroke in (mm) 7.09 (180) 7.87 (200) 8.66 (220) 9.45 (240)
Barrel Heating Capacity kW 22.3 28.1 23.3 26.6 38.2 23.3 26.6 38.2 47.4 26.6 38.2 47.4 65.3 26.6 38.2 47.4 65.3
STDA 58.4 58.4 58.4 61.3 58.9 58.9 58.9 60.5 60.5 60.5 66.3 74.9 74.9 74.9 76.5 76.5 76.5 82.3 86.9 86.9 86.9 90.5 90.5 90.5 96.3 100.9 100.9 100.9 109.9 109.9 109.9 106.5 106.5 106.5 112.3 116.9 116.9 116.9 125.9 125.9 125.9
Electrical
kVA
Capacity High
74.4 74.4 74.4 77.3 74.9 74.9 74.9 76.5 76.5 76.5 82.3 88.9 88.9 88.9 90.5 90.5 90.5 96.3 100.9 100.9 100.9 106.5 106.5 106.5 112.3 116.9 116.9 116.9 125.9 125.9 125.9 126.5 126.5 126.5 132.3 136.9 136.9 136.9 145.9 145.9 145.9
Speed
General
28.71 x 7.19
ft 27.07 x 7.19 x 7.58 28.38 x 7.19 x 7.58 32.84 x 7.81 x 7.12 33.83 x 7.81 x 7.12 35.07 x 8.14 x 7.19 36.78 x 9.65 x 7.94
Machine Dimensions x 7.58
(L x W x H) 8.75 x 2.19 x
m 8.25 x 2.19 x 2.31 8.65 x 2.19 x 2.31 10.01 x 2.38 x 2.17 10.31 x 2.38 x 2.17 10.69 x 2.48 x 2.19 11.21 x 2.94 x 2.42
2.31
US Ton (TTL) 29.8 30.9 31.4158635 31.7465568 34.2 34.7227965 35.0534898 36.4 44.1 44.4 45.7 46.1 63.9 64.3 65.6 65.9
Machine Weight
Ton (TTL) 27.0 28.0 28.5 28.8 31.0 31.5 31.8 33.0 40.0 40.3 41.5 41.8 58.0 58.3 59.5 59.8
C
B
C
General Layout Drawing
B
A M(Nozzle Stroke)
L
A
V
X
V W
X
K
U
W
R
Q
P P
U
R
S-T O N O Hopper mounting surface
Q
P P
Detail of take-out Robot (Ejector Stroke)J
S-T O N O Hopper mounting surface
Hopper Mounting Pattern Robotinstallation
Mounting seatPattern (Clamping Stroke)H G(Mold Thickness)
Detail of take-out Robot
E F I(Daylight)
installation seat
D
E F
D
A B C D E F G H I J K L M N O P Q R S T U V W X
LSG 35E 128 43.3 53.8 37.1 19.2 19.2 4.7 ~ 5.9 9.1 18.9 2.4 4" 2 9.1 3.9 - - 1.8 1.6 4 M10 6.7 3.5 1.6" M10
LSG 55E 144.5 45.1 58 41.6 22.5 19.1 5.9 ~ 13.8 10.6 23.2 2.8 4" 2 9.8 3.9 - - 2.2 1.6 4 M10 6.7 3.5 1.6" M10
LSG 90E 164.3 47.2 64.3 46.4 24.3 22.1 5.9 ~ 13.8 12.6 26.4 2.8 4" 2 13.8 11 4.1 - 1.4 2.8 8 M16 6.7 3.5 1.6" M10
LSG 120E 193.6 47.4 66.2 51.7 26.9 24.8 7.9 ~ 16.1 16.1 29.9 4.7 4" 2 15 13.8 4.1 - 1.4 2.8 8 M16 6.7 3.5 2.1" M10
LSG 190E 213.5 50.3 73 59 31.6 27.4 9.8 ~ 19.7 19.7 37.8 4.7 4" 2 15 16.5 5.5 - 1.4 5.5 8 M20 6.7 3.5 2.1" M10
LSG 240E 247.2 51.1 74.1 67.1 36.8 30.3 10.6 ~ 21.7 21.7 43.3 5.1 4" 2 18.1 22 5.5 - 1.4 5.5 8 M20 6.7 3.5 2.5" M10
LSG 310E 270.7 54.3 80.2 73.4 39.6 33.7 11.8 ~ 24.8 24.8 49.2 5.5 4" 2 22.8 27.6 5.5 - 1.4 5.5 8 M20 6.7 3.5 2.5" M10
LSG 390E 297 56.9 86.7 76.9 41.5 35.4 13.8 ~ 27.6 27.6 55.9 5.9 4" 2 22.8 27.6 5.5 - 1.4 5.5 8 M20 6.7 3.5 2.5" M10
LSG 440E 299 56.9 86.7 76.9 41.5 35.4 13.8 ~ 29.5 27.6 59.8 5.9 4" 2 22.8 27.6 5.5 - 1.4 5.5 8 M20 6.7 3.5 2.5" M10
LSG 500E 340.4 59.6 90.7 84.8 44.2 40.6 13.8~29.5 32.5 62.0 7.1 4" 2.0 32.7 27.6 5.5 7.9 2.8 9.8 8 M20 11 7.5 2.7" M16
LSG 610E 394 54.7 88.2 94.2 47.9 46.2 15.7 ~ 31.5 31.5 66.9 7.9 4" 2 32.7 - - 7.9 2.8 9.8 8 M20 11 7.5 2.9" M16
LSG 720E 420.7 53.5 86.2 97.8 48.9 48.9 17.7 ~ 43.3 43.3 82.7 8.7 4.7" 2 32.7 - - 22 2.8 4.1/4.1 9 M24 11 7.5 2.9" M16
LSG 950E 439.9 58.3 95.1 115.9 57.9 57.9 19.7 ~ 51.2 51.2 98.4 9.4 4.7" 2 32.7 - 11 22 2.8 4.1/4.1 15 M24 11 7.5 2.9" M16
• Closed Loop Control for Injection Process • Feed Throat Temperature Control Device • Euromap 73 (Safety Fence Interface) • Uninterrupted Power Supply (UPS) for Controller
• Ceramic Heater Bands for Barrel • Nozzle Retract Sensor • Robot Interface E12 • Additional Programmable I/O
• Cable Heater for Nozzle Zone • LM Guides for Injection Unit and Carriage • Interface for Additional Valve Gates • CE Marking
• Pre-Heating Temperature Control • Screw 1st and 2nd Retract • Integrated Hot Runner System • UL/CSA Certified Electric Parts
• Removable Nozzle Tip (R1/2" x D7/32" x L100mm) with
• Heater Thermocouples (J-Type) • Air Conditioning Unit In Control Cabinet • Safety Label Language (Spanish/French/etc.)
7/8-14 Thread
• Nozzle Retract Timing Selector (Sprue Break) • Injection Unit Dual Pull-In Cylinders (LSG-55E~950E) • Additional Single-Phase Outlets (110V) • RFID Passkey System for Security Login
• Screw Back Pressure Regulator • Barrel Support (LSG-720E~950E) • Additional Three-Phase Outlets (240V, 480V) • Barcode Scanning System for Mold Data Retrieval
• Screw Cold Start Prevention • Injection Compression (Coining) General
• Screw Tip (for General Resins, Non-Return Valve Type) • Mold Open and Close During Screw Recovery • Spare Parts Package
• Leveling Pads (Screw Tip, Heater Bands, Thermocouples)
Control System
• Basic Tool Kit Package
• Main Power 480V / 3P / 60Hz • USB Port (Molding Data Transfer, Screen Shot, etc.)
• Closed Loop Control System • KEBA 18.5" Touchscreen Controller
• PID Temperature Control • MIOSHA 2nd Power Disconnect
• Graphs for Injection Speed & Pressure • Dual 110V Convenience Outlet at Operator Station (Single Phase)
• Automatic Motor Power Off • Internal Lights for Control Cabinet & Cabinet Door Hinges
• Automatic Purging Program • Programmable I/O (8 Inputs / 8 Outputs)
• Back Pressure Relief Circuit • Valve Gate (Interface Only / 1 Zone DC24V or AC220V)
• Emergency Stop Switches • Ethernet Port for Remote Monitoring
• Three-Color Alarm Light & Buzzer • Wi-Fi Router for Remote Service
• Robot Interface E67 • Barrel Cover
• Core Pull or Eject During Mold Open • Pre-Heating Control for Barrel
• ANSI Safety Standard • Automatic Power Shut-Down Circuit
• Motion/No Motion Key Switch • Production Counter Integrated ONE Solution
Smart Machine for Industry 4.0
• Nozzle Safety Cover with Interlock
General
• Leveling Pads
• Spare Parts Package
• Basic Tool Kit Package
Delivering value
(Screw Tip, Heater Bands, Thermocouples)
Headquarters
Seoul, South Korea
USA Headquarters
Duluth, Georgia
Tel : +1 (470) 347 3862
US service : +1 (800) 843 1672
Email : sales@lsinjectionusa.com
Midwest Tech Center
Chicago, Illinois
Tel : +1 (800) 843-1672
Email : sales@lsinjectionusa.com
West Coast Tech Center
Anaheim, California
Tel : +1 (714) 743-0906
Home Page
USA