Professional Documents
Culture Documents
Structural Design and Analysis (Deo Lour)
Structural Design and Analysis (Deo Lour)
WITH ROOFDECK
Deo Lour Executive Village, Brgy. Balite, Tagaytay Cavite
A. Applicable Codes
A. Foundation System
B. Superstructure System
The structural system itself shall engage the use of special moment
resisting space frame (SMRF) which is basically a beam, column system.
Two – way and One – way slab system will be employed for the floor
system.
A. Computer Analysis
The lateral load shall employ the computer program for wind, seismic
and gravity loads.
1. Wind Load
The wind forces are based on the provisions of NSCP for a basic
wind velocity of 260 kph. The overall and story drift under wind
load will be limited to 0.0025 H.
Load Combinations :
a) U = 1.2D ± 0.5W
b) U = 1.2D ± 1.0W +0.5L
c) U = 0.9D ± 1.0W
V = Cv I Wd (1/RT)
Where : Cv = Seismic Coefficient
I = Importance Factor
Wd = Total Seismic Dead Load
R= Numerical Coefficient
T= Elastic Fundamental Period
The overall and story drift under static earthquake forces will be
limited to 0.00333 H.
Load Combinations :
1. Concrete
2. Reinforcing Steel
3. Structural Steel
V. LOAD ASSUMPTIONS
1. Dead Loads
A. TYPICAL FLOOR
B. ROOF LOADING
2. Live Loads
1 Structure Data
This chapter provides model geometry information, including items such as story levels, point coordinates, and
element connectivity.
1.2 Mass
2 Properties
This chapter provides property information for materials, frame sections, shell sections, and links.
2.1 Materials
Notional
From Depth Width Rigid Notional Design Area As2
Name Material Auto
File? mm mm Zone? Size Type Type Modifier Modifier
Factor
B250x350>350x475 3000Psi No 475 350 No Auto 1 Beam 1 1
B250x400 3000Psi No 400 250 No Auto 1 Beam 1 1
B250x475 3000Psi No 475 250 No Auto 1 Beam 1 1
C130x350 3000Psi No 350 130 No Auto 1 Column 1 1
C130x350>230x450 3000Psi No 450 230 No Auto 1 Column 1 1
C130x350>230x550 3000Psi No 550 230 No Auto 1 Column 1 1
C130x350>280x450 3000Psi No 450 280 No Auto 1 Column 1 1
C150x300 3000Psi No 300 150 No Auto 1 Column 1 1
C170x300 3000Psi No 300 170 No Auto 1 Column 1 1
C170x300>270x400 3000Psi No 400 270 No Auto 1 Column 1 1
C170x300>300x300 3000Psi No 300 300 No Auto 1 Column 1 1
C180x300 3000Psi No 300 180 No Auto 1 Column 1 1
C200x300 3000Psi No 300 200 No Auto 1 Column 1 1
C250x250 3000Psi No 250 250 No Auto 1 Column 1 1
C250x400 3000Psi No 400 250 No Auto 1 Column 1 1
C260x350 3000Psi No 350 260 No Auto 1 Column 1 1
C300x300 3000Psi No 300 300 No Auto 1 Column 1 1
C300x350 3000Psi No 350 300 No Auto 1 Column 1 1
C310x310 3000Psi No 310 310 No Auto 1 Column 1 1
3 Loads
This chapter provides loading information as applied to the model.
Direction = Multiple
Period Used W V Ft
Direction Vcoeff
(sec) (kN) (kN) (kN)
X 0.1 0.143906 1747.1875 251.4306 0
Y 0.1 0.143906 1747.1875 251.4306 0
X + Ecc. Y 0.1 0.143906 1747.1875 251.4306 0
Y + Ecc. X 0.1 0.143906 1747.1875 251.4306 0
X - Ecc. Y 0.1 0.143906 1747.1875 251.4306 0
Y - Ecc. X 0.1 0.143906 1747.1875 251.4306 0
4 Analysis Results
This chapter provides analysis results.
Step X Y Z
Story Output Case Case Type Direction Drift Label
Type m m m
2ND 1.2D+1.6Lr+0.5L Combination X 0.000267 15 11.49 -2.83 3
2ND 1.2D+1.6Lr+0.5L Combination Y 0.000238 2 0 6.5 3
2ND 1.2D+1.6Lr+0.5W Combination X 0.000234 15 11.49 -2.83 3
2ND 1.2D+1.6Lr+0.5W Combination Y 0.000202 2 0 6.5 3
2ND 1.2D+W+0.5L+0.5Lr Combination X 0.000257 15 11.49 -2.83 3
2ND 1.2D+W+0.5L+0.5Lr Combination Y 0.000231 2 0 6.5 3
2ND 1.44D+E+0.5L Combination Max X 0.006166 13 6.49 -2.83 3
2ND 1.44D+E+0.5L Combination Max Y 0.005603 2 0 6.5 3
2ND 1.44D+E+0.5L Combination Min X 0.006785 15 11.49 -2.83 3
2ND 1.44D+E+0.5L Combination Min Y 0.005212 14 2.5 0 3
2ND 0.9D+W Combination X 0.000168 15 11.49 -2.83 3
2ND 0.9D+W Combination Y 0.000146 2 0 6.5 3
2ND 0.655D+E Combination Max X 0.006347 15 11.49 -2.83 3
2ND 0.655D+E Combination Max Y 0.005437 2 0 6.5 3
2ND 0.655D+E Combination Min X 0.006603 15 11.49 -2.83 3
2ND 0.655D+E Combination Min Y 0.005217 3 0 2.5 3
Step P VX VY T MX
Story Location Output Case Case Type
Type kN kN kN kN-m kN-m
RDECK Top 1.44D+E+0.5L Combination Min 1628.5099 -180.6844 -180.1173 -969.4845 6076.7182
RDECK Bottom 1.44D+E+0.5L Combination Min 1786.231 -180.6844 -180.1173 -969.4845 6161.1829
RDECK Top 0.9D+W Combination 756.8693 0.1083 -0.0613 -0.5451 2780.6329
RDECK Bottom 0.9D+W Combination 855.1311 0.1083 -0.0613 -0.5451 3169.5869
RDECK Top 0.655D+E Combination Max 663.3477 180.9713 179.935 967.9403 2454.3197
RDECK Bottom 0.655D+E Combination Max 734.9041 180.9713 179.935 967.9403 3277.5321
RDECK Top 0.655D+E Combination Min 663.3477 -180.8043 -180.0338 -968.7967 2452.676
RDECK Bottom 0.655D+E Combination Min 734.9041 -180.8043 -180.0338 -968.7967 2195.9821
2ND Top Seismic LinStatic Max 0 -0.138 -0.1625 1036.4519 540.775
2ND Bottom Seismic LinStatic Max 0 -0.138 -0.1625 1036.4519 1318.2191
2ND Top Seismic LinStatic Min 0 -260.9993 -259.148 -1446.3583 0.2955
2ND Bottom Seismic LinStatic Min 0 -260.9993 -259.148 -1446.3583 0.783
2ND Top 1.4D Combination 2539.6517 0.2474 -0.1605 -0.9244 9999.0972
2ND Bottom 1.4D Combination 2726.1515 0.2474 -0.1605 -0.9244 10681.859
2ND Top 1.2D+1.6L+0.5Lr Combination 3046.2297 0.2936 -0.2521 -1.4237 12176.7893
2ND Bottom 1.2D+1.6L+0.5Lr Combination 3206.0866 0.2936 -0.2521 -1.4237 12762.3573
2ND Top 1.2D+1.6Lr+0.5L Combination 2528.5919 0.2418 -0.1771 -1.0101 10003.4694
2ND Bottom 1.2D+1.6Lr+0.5L Combination 2688.4488 0.2418 -0.1771 -1.0101 10588.8125
2ND Top 1.2D+1.6Lr+0.5W Combination 2188.5517 0.2126 -0.1381 -0.7953 8615.3844
2ND Bottom 1.2D+1.6Lr+0.5W Combination 2348.4086 0.2126 -0.1381 -0.7953 9200.6104
2ND Top 1.2D+W+0.5L+0.5Lr Combination 2313.5458 0.2303 -0.167 -0.9552 9181.857
2ND Bottom 1.2D+W+0.5L+0.5Lr Combination 2473.4027 0.2303 -0.167 -0.9552 9767.1695
2ND Top 1.44D+E+0.5L Combination Max 2883.5757 261.2796 258.9471 1445.2093 11952.2261
2ND Bottom 1.44D+E+0.5L Combination Max 3076.0168 261.2796 258.9471 1445.2093 13434.289
2ND Top 1.44D+E+0.5L Combination Min 2883.5757 -260.719 -259.349 -1447.5073 10870.6761
2ND Bottom 1.44D+E+0.5L Combination Min 3076.0168 -260.719 -259.349 -1447.5073 10797.8508
2ND Top 0.9D+W Combination 1478.5888 0.1508 -0.0959 -0.5549 5839.4435
2ND Bottom 0.9D+W Combination 1598.4814 0.1508 -0.0959 -0.5549 6278.3399
2ND Top 0.655D+E Combination Max 1188.9198 261.1151 259.0729 1445.9255 5221.7809
2ND Bottom 0.655D+E Combination Max 1276.2283 261.1151 259.0729 1445.9255 6318.8551
2ND Top 0.655D+E Combination Min 1188.9198 -260.8835 -259.2232 -1446.7911 4140.231
2ND Bottom 0.655D+E Combination Min 1276.2283 -260.8835 -259.2232 -1446.7911 3682.4169
MY
Story Location
kN-m
RDECK Top -0.0011
RDECK Bottom -0.2019
RDECK Top -1.0844
RDECK Bottom -543.7478
RDECK Top -8218.1049
RDECK Bottom -9204.4198
RDECK Top -10250.8846
RDECK Bottom -11096.108
RDECK Top -8714.5831
RDECK Bottom -9559.9268
RDECK Top -7141.8217
RDECK Bottom -7987.233
RDECK Top -6919.404
RDECK Bottom -7764.7742
RDECK Top -9408.6148
RDECK Bottom -9883.6293
RDECK Top -9410.7835
RDECK Bottom -10971.1249
RDECK Top -3997.1225
RDECK Bottom -4631.2011
RDECK Top -3846.1627
RDECK Bottom -3765.2356
RDECK Top -3848.3315
RDECK Bottom -4852.7311
2ND Top -0.2019
2ND Bottom -0.616
2ND Top -543.7478
2ND Bottom -1326.7457
2ND Top -14999.4524
2ND Bottom -16234.9018
2ND Top -17939.4549
2ND Bottom -18998.1667
2ND Top -15113.4027
2ND Bottom -16172.27
2ND Top -12954.4038
2ND Bottom -14013.3586
2ND Top -13318.2501
2ND Bottom -14377.1517
2ND Top -16449.5802
2ND Bottom -16941.3144
2ND Top -17537.0757
2ND Bottom -19594.8058
2ND Top -8356.5792
2ND Bottom -9150.8213
2ND Top -6478.1387
2ND Bottom -6273.5076
2ND Top -7565.6343
2ND Bottom -8926.999
Material Properties:
f'c = 15.00 MPa Concrete Compressive Strength
fy = 230.00 MPa Reinforcing Bar Yield Strength
fyt = 230.00 MPa Temperature Bar Yield Strength
Slab Properties:
L = 3.40 m Span length
h = 90 mm Slab thickness
dbm = 10 mm Main reinforcing bar diameter
dbt 10 mm Temperature bar diameter
Loading Data:
DL = 2.12 kPa Dead Load (Self Weight)
SD = 2.88 kPa Super Imposed Dead Load
LL = 1.92 kPa L
Support Condition:
One end continuous
Output:
1. Minimum slab thickness
ACI 318-05 Sec. 9.5.2.1:
Minimum thickness for one-way construction not supporting or
attached to partitions or other construction likely to be damaged
by large deflections: For fy other than 415 MPa, multiply values
by (0.4 + fy/700).
L/20 x (0.4 + fy/700), for Simply supported
hmin = L/24 x (0.4 + fy/700), for One end continuous
L/28 x (0.4 + fy/700), for Both ends continuous
L/10 x (0.4 + fy/700), for Cantilever
Wu = 9.07 kPa
4. Flexural design
a. @ Discontinuous end c. @ Continuous edge
Mu = 4.37 kN-m Mu = 10.49 kN-m
d = 65.00 mm d = 65.00 mm
Rn = 1.15 Mpa Rn = 2.76 Mpa
r = 0.0052 r = 0.0137
r(gross) = 0.0038 r(gross) = 0.0099
r(min) = 0.0018 r(min) = 0.0000
As = 340.82 mm2 As = 888.94 mm2
Sp = 200.00 mm.o.c. Sp = 75.00 mm.o.c.
fVc > Vu, ok for shear. NOTE: AS PER EXISTING, CONTINUOUS EDGE & MIDSPAN FAILED
BY TECHNICAL CALCULATION
SLAB RETROFITTING DESIGN
SLAB RETROFITTING
DESIGN OF
BEAMS
Project: RENOVATION OF TWO STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Location: DEO LOUR EXECUTIVE VILLAGE, BRGY. BALITE, TAGAYTAY CAVITE
Owner: MR. MICHAEL PETE CABELLO
Job no.: Design By: Check By:
Subject: BEAM SUMMARY Date: Jun-9-23 Revision:
BEAM ANALYSIS SUMMARY