Professional Documents
Culture Documents
Engineering Drawing n2 Test 2
Engineering Drawing n2 Test 2
N2
ENGINEERING DRAWING
ICASS TEST 1
2021
LECTURER: MR CHRIS
MODERATOR: MISS VALENTINE
MARKS: 60
DURATION: 3 HOURS
ID NUMBER
INSTRUCTIONS:
Answer all questions
Read all the questions carefully before attempting to answer.
Number your answers as it is in the question paper.
Write neatly and legibly.
Use a pencil to sketch all drawings
1|Page
QUESTION 1: WELDING, COMPUTER AIDED DRAUGHTING, FASTENERS AND
FITTINGS
1.2.1 T-joist
1.2.2 Keyway
1.2.4 Hexagon
1.3 Name FOUR types of storing devices you can use on a computer. (4)
[13]
FIGURE 1 shows a machined pulling spindle. Draw the given view to a scale of 1 : 1.
Provide part A with a left-hand square thread and part B with a right-hand square
thread with a pitch of 16 mm. (12)
[12]
FIGURE 2 shows an outside front view and an outside left view of a chain lug.
Draw to scale 1 : 1 and in first angle orthographic projection the following views:
3.4 Draw the following title and scale beneath the layout:
CHAIN LUG
Scale 1 : 1 (2)
2|Page
3.5 Draw the symbol for first angle orthographic projection beneath the layout. (1)
[23]
QUESTION 4: ISOMETRIC
FIGURE 3 shows two views of a work piece in first angle orthographic projection.
Do not redraw the given views, but draw to scale 1 : 1 an isometric view of the work
piece.
3|Page