Professional Documents
Culture Documents
LDH__BSOSR6x28_EN
LDH__BSOSR6x28_EN
LDH__BSOSR6x28_EN
SERUM/PLASMA APPLICATION
Linearity : 15 % A 1 B 0
No Lag Time: NO ∇ On-board stability period: 21
Calibration Specific
General ISE
# User defined
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
‡ Refer to IFU for further instruction.
† System Calibrator Cat. No.: 66300
Enzyme BSOSR6x28.03
2012-04
LDH (IFCC), AU600 Serum/Plasma Application
System Reagent: OSR6128 Reagent ID: 028
Sample: Volume 2.3 μL Dilution 0 μL Pre-Dilution Rate: 1 Sample Volume 2.3 μL Dilution 0 μL OD Limit
Pre-Dilution Rate 1 ∇ Min.OD -0.1 Max.OD 1.7
Reagents: R1 Volume 62 μL Dilution 21 μL Min OD Max OD
Rgt. Volume R1(R1-1) 62 μL Dilution 21 μL Reagent OD Limit
R2 Volume 31 μL Dilution 10 μL L -0.1 H 1.7
First Low -0.1 High 0.6
Reagent OD limit:
Last Low -0.1 High 0.6
Wavelength: Pri. 340 ∇ Sec. 660 ∇ First L -0.1 First H 0.6
R2(R2-1) 31 μL Dilution 10 μL
Method: RATE ∇ Last L -0.1 Last H 0.6
Dynamic Range Low 25* High 1200*
Reaction slope: + ∇ Dynamic Range: Common Rgt. Type Noneф Name ф Correlation Factor A 1 B 0
Measuring Point 1: First 15 Last 23 L 25* H 1200* Wavelength Pri 340 ∇nm Sec. 660 ∇nm Factor for Maker A 1 B 0
Measuring Point 2: First Last Correlation Factor: Method RATE ∇
SERUM/PLASMA APPLICATION
Linearity : 15 % A 1 B 0 Reaction Slope + ∇ Onboard Stability Period 21 Day 0 Hour
No Lag Time: NO ∇ On-board stability period: 21 Measuring Point1 First 15 Last 23 LIH Influence Check # ∇
Measuring Point2 First Last Lipemia +++++ ∇
Linearity Limit 15 % Icterus +++++ ∇
Specific Test Parameters Lag Time Check NO ∇ Hemolysis + ∇
General LIH ISE Range
Parameters Specific Test Parameters
Test Name: LDH28 ∇ < > Type: Serum ∇ General LIH ISE HbA1c Calculated Test Range
Value/Flag: # ∇ Level L: # Level H: # Test Name: LDH28 ∇ < > Type: Serum ∇
Normal Ranges: Age L Age H
Sex Year Month Year Month L H Value/Flag: # ∇ Low High
Level # # Panic Value
R 1. # ∇ # # # # # #
Specific Ranges: From To Low High
R 2. # ∇ # # # # # #
Sex Year Month Year Month Low High # #
R 3. # ∇ # # # # # # R 1. # ∇ # # # # # #
R 4. # ∇ # # # # # # R 2. # ∇ # # # # # #
R 5. # ∇ # # # # # # R 3. # ∇ # # # # # #
R 6. # ∇ # # # # # # R 4. # ∇ # # # # # #
7. None Selected # # R 5. # ∇ # # # # # #
8. Out of Range L H # # R 6. # ∇ # # # # # #
Panic Value: # # Unit: U/L* Decimal places: # 7. No demographics # #
8. Not within expected values # #
Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibration Specific
Calibrators Calibration Specific STAT Table Calibration
General ISE
General ISE
Test Name: LDH28 ∇ < > Type Serum ∇ R
Test Name: LDH28 ∇ < > Type Serum ∇ Use Serum Cal.
Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # Process: ∇ Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # ∇
<Calibrator Parameters> Range
Cal. No. OD CONC Factor/OD-L Factor/OD-H Calibrator OD Conc Low High Slope Check None ∇
Point 1: # † §6500* §12100* Point 1: # ∇ † §6500* §12100*
Point 2: Point 2: ∇ Allowance Range Check
Point 3: Point 3: ∇
Point 4: Point 4: ∇ R Reagent Blank
Point 5: Point 5: ∇ R Calibration
Point 6: Point 6: ∇
Point 7: Point 7 ∇ Advanced Calibration
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration: # ∇ Point 8 ∇ Operation # ∇
MB Type Factor: # Calibration Stability Period: ‡ Point 9 ∇
Point 10 ∇ Interval (RB/ACAL) # ∇
<Point Cal. For No. of Correction Points ∇ Use Master Curve ∇ R Lot Calibration
# User defined Master Curve> OD Range
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60 Calibrator OD Conc Low High Stability
‡ Refer to IFU for further instruction. Point-1 ∇ Reagent Blank ‡ Day ‡ Hour
† System Calibrator Cat. No.: 66300 Point-2 ∇ Calibration ‡ Day ‡ Hour
ф AU680 MB Type Factor: # 1-Point Calibration Point ∇ R with Conc-0
Enzyme BSOSR6x28.03
2012-04
LDH (IFCC), AU5800 Serum/Plasma Application
System Reagent: OSR6128 Reagent ID: 028
Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range
SERUM/PLASMA APPLICATION
Reaction Slope + ∇ Onboard Stability Period 21 Day 0 Hour
Measuring Point1 1st 15 Last 23 LIH Influence Check # ∇
Measuring Point2 1st Last Lipemia +++++ ∇
Linearity Limit 15 % Icterus +++++ ∇
Lag Time Check NO ∇ Hemolysis + ∇
Value/Flag: # ∇ .
Level Low # High #
Specific Ranges: From To
Sex Year Month Year Month Low High
R 1. # ∇ # # # # # #
R 2. # ∇ # # # # # #
R 3. # ∇ # # # # # #
R 4. # ∇ # # # # # #
R 5. # ∇ # # # # # #
R 6. # ∇ # # # # # #
7. Standard demographics # #
8. Not within expected values # #
Panic Value Low # High # Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibrators Calibration Specific
General ISE
Enzyme BSOSR6x28.03
2012-04
LDH (IFCC), AU400/AU640 Paediatric Application LDH (IFCC), AU600 Paediatric Application
System Reagent: OSR6128 Reagent ID: 028 System Reagent: OSR6128 Reagent ID: 028
PAEDIATRIC APPLICATION
No lag time NO ∇ On-board stability period 21
Select using Space key, or select from list displayed by Guide key
Specific Test Parameters
General LIH ISE Range Test No # Test name LD28P ∇ Sample type Ser ∇ Page 2/2
Test Name: LD28P ∇ < > Type: Serum ∇ Level L Level H
Value/flag # ∇ # #
Value/Flag: # ∇ Level L: # Level H: # Normal range
Normal Ranges: Age L Age H Sex Age L Age H L H
Sex Year Month Year Month L H 1 # ∇ # Y # M # Y # M→ # #
R 1. # ∇ # # # # # # 2 # ∇ # Y # M # Y # M→ # #
R 2. # ∇ # # # # # # 3 # ∇ # Y # M # Y # M→ # #
R 3. # ∇ # # # # # # 4 # ∇ # Y # M # Y # M→ # #
R 4. # ∇ # # # # # # 5 # ∇ # Y # M # Y # M→ # #
R 5. # ∇ # # # # # # 6 # ∇ # Y # M # Y # M→ # #
R 6. # ∇ # # # # # # 7 Non select # #
7. None Selected # # 8 Out of range # #
8. Out of Range L H # # L H
Panic Value: # # Unit: U/L* Decimal places: # Panic value # #
Select the function using the Function key or the Mouse
Calibration specific
Calibration Specific
General ISE Test No # Test name LD28P ∇
Test Name: LD28P ∇ < > Type Serum ∇ Cal type 1 AB ∇ Count #
Formula 1 Y=AX+B ∇ Process ∇
Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # Process: ∇
Selection calibrator
Cal No OD Conc Factor/OD-L Factor/OD-H
Cal. No. OD CONC Factor/OD-L Factor/OD-H
Point 1 # ∇ † §8400* §15600*
Point 1: # † §8400* §15600*
Point 2:
Point 2 ∇
Point 3: Point 3 ∇
Point 4: Point 4 ∇
Point 5: Point 5 ∇
Point 6: Point 6 ∇
Point 7: Point 7 ∇
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration: # ∇ 1-point cal. point
MB type factor #
MB Type Factor: # Calibration Stability Period: ‡
Calibrator stability period ‡
Select the function using the Function key or the Mouse
# User defined
# User defined ¤ Analyser default value
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
‡ Refer to IFU for further instruction.
‡ Refer to IFU for further instruction.
† System Calibrator Cat. No.: 66300
† System Calibrator Cat. No.: 66300
Enzyme BSOSR6x28.03
2012-04
LDH (IFCC), AU2700/AU5400 Paediatric Application LDH (IFCC), AU680/AU480 Paediatric Application
System Reagent: OSR6128 Reagent ID: 028 System Reagent: OSR6128 Reagent ID: 028
Parameters Specific Test Parameters
Specific Test Parameters General LIH ISE HbA1c Calculated Test Range
General LIH ISE Range
Test Name: LD28P ∇ < > Type: Serum ∇ Operation Yes ∇
Test Name: LD28P ∇ < > Type: Serum ∇ Operation: Yes ∇
Sample: Volume 2.3 μL Dilution 10 μL Pre-Dilution Rate: 1 Sample Volume 2.3 μL Dilution 10 μL OD Limit
Pre-Dilution Rate 1 ∇ Min.OD -0.1 Max.OD 1.7
Reagents: R1 Volume 62 μL Dilution 11 μL Min OD Max OD
Rgt. Volume R1(R1-1) 62 μL Dilution 11 μL Reagent OD Limit
R2 Volume 31 μL Dilution 10 μL L -0.1 H 1.7
First Low -0.1 High 0.6
Reagent OD limit:
Last Low -0.1 High 0.6
Wavelength: Pri. 340 ∇ Sec. 660 ∇ First L -0.1 First H 0.6
R2(R2-1) 31 μL Dilution 10 μL
Method: RATE ∇ Last L -0.1 Last H 0.6
Dynamic Range Low 25* High 1200*
Reaction slope: + ∇ Dynamic Range: Common Rgt. Type Noneф Name ф Correlation Factor A 1 B 0
Measuring Point 1: First 15 Last 23 L 25* H 1200* Wavelength Pri 340 ∇nm Sec. 660 ∇nm Factor for Maker A 1 B 0
Measuring Point 2: First Last Correlation Factor: Method RATE ∇
Linearity : 15 % A 1 B 0 Reaction Slope + ∇ Onboard Stability Period 21 Day 0 Hour
No Lag Time: NO ∇ On-board stability period: 21
PAEDIATRIC APPLICATION
Measuring Point1 First 15 Last 23 LIH Influence Check # ∇
Measuring Point2 First Last Lipemia +++++ ∇
Linearity Limit 15 % Icterus +++++ ∇
Specific Test Parameters Lag Time Check NO ∇ Hemolysis + ∇
General LIH ISE Range
Parameters Specific Test Parameters
Test Name: LD28P ∇ < > Type: Serum ∇ General LIH ISE HbA1c Calculated Test Range
Value/Flag: # ∇ Level L: # Level H: # Test Name: LD28P ∇ < > Type: Serum ∇
Normal Ranges: Age L Age H
Sex Year Month Year Month L H Value/Flag: # ∇ Low High
Level # # Panic Value
R 1. # ∇ # # # # # #
Specific Ranges: From To Low High
R 2. # ∇ # # # # # #
Sex Year Month Year Month Low High # #
R 3. # ∇ # # # # # # R 1. # ∇ # # # # # #
R 4. # ∇ # # # # # # R 2. # ∇ # # # # # #
R 5. # ∇ # # # # # # R 3. # ∇ # # # # # #
R 6. # ∇ # # # # # # R 4. # ∇ # # # # # #
7. None Selected # # R 5. # ∇ # # # # # #
8. Out of Range L H # # R 6. # ∇ # # # # # #
Panic Value: # # Unit: U/L* Decimal places: # 7. No demographics # #
8. Not within expected values # #
Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibration Specific
Calibrators Calibration Specific STAT Table Calibration
General ISE
General ISE
Test Name: LD28P ∇ < > Type Serum ∇ R
Test Name: LD28P ∇ < > Type Serum ∇ Use Serum Cal.
Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # Process: ∇ Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # ∇
<Calibrator Parameters> Range
Cal. No. OD CONC Factor/OD-L Factor/OD-H Calibrator OD Conc Low High Slope Check None ∇
Point 1: # † §6500* §12100* Point 1: # ∇ † §6500* §12100*
Point 2: Point 2: ∇ Allowance Range Check
Point 3: Point 3: ∇
Point 4: Point 4: ∇ R Reagent Blank
Point 5: Point 5: ∇ R Calibration
Point 6: Point 6: ∇
Point 7: Point 7 ∇ Advanced Calibration
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration: # ∇ Point 8 ∇ Operation # ∇
MB Type Factor: # Calibration Stability Period: ‡ Point 9 ∇
Point 10 ∇ Interval (RB/ACAL) # ∇
<Point Cal. For No. of Correction Points ∇ Use Master Curve ∇ R Lot Calibration
Master Curve> OD Range
# User defined Calibrator OD Conc Low High Stability
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60 Point-1 ∇ Reagent Blank ‡ Day ‡ Hour
‡ Refer to IFU for further instruction. Point-2 ∇ Calibration ‡ Day ‡ Hour
† System Calibrator Cat. No.: 66300
ф AU680 MB Type Factor: # 1-Point Calibration Point ∇ R with Conc-0
Enzyme BSOSR6x28.03
2012-04
LDH (IFCC), AU5800 Paediatric Application
System Reagent: OSR6128 Reagent ID: 028
Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range
PAEDIATRIC APPLICATION
Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range
Value/Flag: # ∇ .
Level Low # High #
Specific Ranges: From To
Sex Year Month Year Month Low High
R 1. # ∇ # # # # # #
R 2. # ∇ # # # # # #
R 3. # ∇ # # # # # #
R 4. # ∇ # # # # # #
R 5. # ∇ # # # # # #
R 6. # ∇ # # # # # #
7. Standard demographics # #
8. Not within expected values # #
Panic Value Low # High # Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibrators Calibration Specific
General ISE
Enzyme BSOSR6x28.03
2012-04