Professional Documents
Culture Documents
LIPASE_BSOSR6x30_EN
LIPASE_BSOSR6x30_EN
System Reagent: OSR6130, OSR6230 Reagent ID: 030 System Reagent: OSR6130, OSR6230 Reagent ID: 030
SERUM/PLASMA APPLICATION
Linearity : 15 % A 1 B 0
No Lag Time: NO ∇ On-board stability period: 21 Linearity Fst 15 % Sec %
No lag time NO ∇ On-board stability period 21
Select using Space key, or select from list displayed by Guide key
Specific Test Parameters
General LIH ISE Range Test No # Test name LIP ∇ Sample type Ser ∇ Page 2/2
Test Name: LIP ∇ < > Type: Serum ∇ Level L Level H
Value/flag # ∇ # #
Value/Flag: # ∇ Level L: # Level H: # Normal range
Normal Ranges: Age L Age H Sex Age L Age H L H
Sex Year Month Year Month L H 1 # ∇ # Y # M # Y # M→ # #
R 1. # ∇ # # # # # # 2 # ∇ # Y # M # Y # M→ # #
R 2. # ∇ # # # # # # 3 # ∇ # Y # M # Y # M→ # #
R 3. # ∇ # # # # # # 4 # ∇ # Y # M # Y # M→ # #
R 4. # ∇ # # # # # # 5 # ∇ # Y # M # Y # M→ # #
R 5. # ∇ # # # # # # 6 # ∇ # Y # M # Y # M→ # #
R 6. # ∇ # # # # # # 7 Non select # #
7. None Selected # # 8 Out of range # #
8. Out of Range L H # # L H
Panic Value: # # Unit: U/L* Decimal places: # Panic value # #
Select the function using the Function key or the Mouse
Calibration specific
Calibration Specific
General ISE Test No # Test name LIP ∇
Test Name: LIP ∇ < > Type Serum ∇ Cal type 8 AB ∇ Count #
Formula 1 Y=AX+B ∇ Process Conc ∇
Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # Process: CONC ∇
Selection calibrator
Cal No OD Conc Factor/OD-L Factor/OD-H
Cal. No. OD CONC Factor/OD-L Factor/OD-H
Point 1 # ∇ † 5000* 10000*
Point 1: # † 5000* 10,000*
Point 2:
Point 2 ∇
Point 3: Point 3 ∇
Point 4: Point 4 ∇
Point 5: Point 5 ∇
Point 6: Point 6 ∇
Point 7: Point 7 ∇
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration: # ∇ 1-point cal. point
MB type factor
MB Type Factor: Calibration Stability Period: 7 Calibrator stability period 7
Select the function using the Function key or the Mouse
# User defined
# User defined ¤ Analyser default value
† For use in AB mode only, refer to IFU for further instructions
† For use in AB mode only, refer to IFU for further instrucation
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
Enzyme BSOSR6x30.02
2011-03
LIPASE, AU2700/AU5400 Serum/Plasma Application LIPASE, AU680/AU480 Serum/Plasma Application
System Reagent: OSR6130, OSR6230 Reagent ID: 030 System Reagent: OSR6130, OSR6230 Reagent ID: 030
Parameters Specific Test Parameters
Specific Test Parameters General LIH ISE HbA1c Calculated Test Range
General LIH ISE Range
Test Name: LIP ∇ < > Type: Serum ∇ Operation Yes ∇
Test Name: LIP ∇ < > Type: Serum ∇ Operation: Yes ∇
Sample: Volume 1.6 μL Dilution 0 μL Pre-Dilution Rate: 1 Sample Volume 1.6 μL Dilution 0 μL OD Limit
Pre-Dilution Rate 1 ∇ Min.OD -0.1 Max.OD 2.5
Reagents: R1 Volume 144 μL Dilution 0 μL Min OD Max OD
Rgt. Volume R1(R1-1) 144 μL Dilution 0 μL Reagent OD Limit
R2 Volume 48 μL Dilution 0 μL L -0.1 H 2.5
First Low -0.1 High 0.15
Reagent OD limit:
Last Low -0.1 High 0.15
Wavelength: Pri. 540 ∇ Sec. 800 ∇ First L -0.1 First H 0.15
R2(R2-1) 48 μL Dilution 0 μL
Method: RATE ∇ Last L -0.1 Last H 0.15
Dynamic Range Low 3* High 600*
Reaction slope: + ∇ Dynamic Range: Common Rgt. Type Noneф Name ф Correlation Factor A 1 B 0
Measuring Point 1: First 17 Last 27 L 3* H 600* Wavelength Pri 540 ∇nm Sec. 800 ∇nm Factor for Maker A 1 B 0
Measuring Point 2: First Last Correlation Factor: Method RATE ∇
Linearity : 15 % A 1 B 0
SERUM/PLASMA APPLICATION
Reaction Slope + ∇ Onboard Stability Period 21 Day 0 Hour
No Lag Time: NO ∇ On-board stability period: 21 Measuring Point1 First 17 Last 27 LIH Influence Check # ∇
Measuring Point2 First Last Lipemia + ∇
Linearity Limit 15 % Icterus +++ ∇
Specific Test Parameters Lag Time Check NO ∇ Hemolysis +++++ ∇
General LIH ISE Range
Parameters Specific Test Parameters
Test Name: LIP ∇ < > Type: Serum ∇ General LIH ISE HbA1c Calculated Test Range
Value/Flag: # ∇ Level L: # Level H: # Test Name: LIP ∇ < > Type: Serum ∇
Normal Ranges: Age L Age H
Sex Year Month Year Month L H Value/Flag: # ∇ Low High
R 1. # ∇ # # # # # # Level # # Panic Value
Specific Ranges: From To Low High
R 2. # ∇ # # # # # #
Sex Year Month Year Month Low High # #
R 3. # ∇ # # # # # # R 1. # ∇ # # # # # #
R 4. # ∇ # # # # # # R 2. # ∇ # # # # # #
R 5. # ∇ # # # # # # R 3. # ∇ # # # # # #
R 6. # ∇ # # # # # # R 4. # ∇ # # # # # #
7. None Selected # # R 5. # ∇ # # # # # #
8. Out of Range L H # # R 6. # ∇ # # # # # #
Panic Value: # # Unit: U/L* Decimal places: # 7. No demographics # #
8. Not within expected values # #
Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibration Specific
Calibrators Calibration Specific STAT Table Calibration
General ISE
General ISE
Test Name: LIP ∇ < > Type Serum ∇ R
Test Name: LIP ∇ < > Type Serum ∇ Use Serum Cal.
Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # Process: CONC ∇ Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # ∇
<Calibrator Parameters> Factor Range
Cal. No. OD CONC Factor/OD-L Factor/OD-H Calibrator OD Conc Low High Slope Check None ∇
Point 1: # † 5000* 10000* Point 1: # ∇ † 5000* 10000*
Point 2: Point 2: ∇ Allowance Range Check
Point 3: Point 3: ∇
Point 4: Point 4: ∇ R Reagent Blank
Point 5: Point 5: ∇ R Calibration
Point 6: Point 6: ∇
Point 7: Point 7 ∇ Advanced Calibration
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration: # ∇ Point 8 ∇ Operation # ∇
MB Type Factor: ICF: Calibration Stability Period: 7
Point 9 ∇
Point 10 ∇ Interval (RB/ACAL) # ∇
<Point Cal. For No. of Correction Points ∇ Use Master Curve ∇ R Lot Calibration
# User defined Master Curve> OD Range
† For use in AB mode only, refer to IFU for further instructions Calibrator OD Conc Low High Stability
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60 Point-1 ∇ Reagent Blank 7 Day 0 Hour
ф AU680 Point-2 ∇ Calibration 7 Day 0 Hour
MB Type Factor: 1-Point Calibration Point ∇ R with Conc-0
Enzyme BSOSR6x30.02
2011-03
LIPASE, AU5800 Serum/Plasma Application
System Reagent: OSR6130, OSR6230 Reagent ID: 030
Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range
SERUM/PLASMA
Reaction Slope + ∇ Onboard Stability Period 21 Day 0 Hour
Measuring Point1 1st 17 Last 27 LIH Influence Check # ∇
Measuring Point2 1st Last Lipemia + ∇
SERUM/PLASMA
Linearity Limit 15 % Icterus +++ ∇
Lag Time Check NO ∇ Hemolysis +++++ ∇
Value/Flag: # ∇ .
Level Low # High #
Specific Ranges: From To
Sex Year Month Year Month Low High
R 1. # ∇ # # # # # #
R 2. # ∇ # # # # # #
APPLICATION
R 3. # ∇ # # # # # #
R 4. # ∇ # # # # # #
APPLICATION
R 5. # ∇ # # # # # #
R 6. # ∇ # # # # # #
7. Standard demographics # #
8. Not within expected values # #
Panic Value Low # High # Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibrators Calibration Specific
General ISE
Enzyme BSOSR6x30.02
2011-03