the numbers 23.023, 0.0003 and 2.| x10 are (n) 4, 4, 2 (b) 5. 1, 2 () 5, 1, 5 (d) 5, 5, 2 |AlEEE 2010) (C) 3.6/ mm gauge gives the following reading 14. Ascrew wire. a when used to measure the diameter of Main scale reading:0 mm Circular scale reading : 52 divisions Given that 1 mm on main scale corresponds to wire 100divisions of the circular scale. The diameter of 2]21 fromn the above data is m (a) 0.52 cm (b)0.052 cm (c) 0.026 cm (d) 0.005 cm [AIEEE 2011] to (c) 0.59 cm (d) 0.52 cm JEE Main 15 Online] 13. Two full turns of the circular scale of a screw scale. The gauge cover a distance of 1mm on its main total number of divisions on the circular scale is 50. Further, it is found that the screw gauge has a zero error of - 0.03 mm. While measuring the diameter of a J thin wire, a student notes the main scale reading of 3 mm andthe number of circular scale divisions in line with the main scale is 35. The diameter of the wire is (a) 3.32 mm (b) 3.73mm (c) 3.67 mm (d)3.38 mm [AIEEE O8] 21. A Ncrew guge witha pitch of 05 nm d circular scale with 50 divisions is used to me the thickness of athin shect of Aluminum Betoe starn the measurement, it is toundthat when the Iwojawh of the sereW gauge are brought in contat, the 19th divisioncoincides with the main cale limeand thatthe Zero of the main scale is barely visible. What is w thickness of the sheet if the main scale readp 0.5 mm and the25th division coincides with the main scale line ? (a) 0.80 mm (b) 0.70 mm (c) 0.50 mm (d) 0.75 mm IJEE Main 16] 16. In all Cxpeithent the algles Jre required to be 1
edusing an instrument. 29 divISIOns of themain
ale eXactly coinde with the 30 divisions of the vernier scale lf the smallest division of the main wale s half-a-degree (05). then the least count of the nstrument is
()one minute (b) halt minute
(d) half degree (AIEEE O9] ()one degre foll 15. A student measured the length of a rod and wrote it as 3.50 cm. Which instrument did he use to measure it ?
(a) A meter scale
(b) A vernier callipers where the 10 divisions in vernier scale match with 9 divisions in main scale and main scale has 10 divisions in 1cm. (c) A screw gauge having 100 divisions in the circular scale and pitch as 1 mm. (d) A screw gauge having 50 divisions in the circular scale and pitch as 1mm. |JEE Main 14| terrnS Of L, and v. (AlIMS 18| A 25. What are he dirnensi ns ot in the relation B F-Avr + B, where F is the torce, t is distance and t Is time ?
(a) [ML'T 2) (b)|L T'|
(c)[LT'1 |AIIMS 18| (d) work and torque 21. If the energy, E=G'Hd, where G is the universal gravitational constant, h is the Planck's constant and cis the velocityof light, then thevalues of P, q and rare, respectively (a) -1/2, 1/2 and 5/2 (b) 1/2, -1/2 and-5/2 ()-1/2, 1/2 and 3/2 d) 1/2, -1/2 and -3/2 [AIIMS 2010] 28.The density of a material in CGS system of units is 4g/cm.In asystem of units in which unit of length is 10cm and unit of mass is 100g, the value of density S of material will be V
la)400 (b) 0.04
lo 04 (dy 40 [CBSE Final 2011| 40. Planck'sconstant (h). speed of light in vacuum () and Newton's gravitational constant (G) are thre fundamental constants Which of the following combinations of these has the dimernsion of length ? hc Gc (a) (b) G