Professional Documents
Culture Documents
9 - Leaky Feeder Cable MSHA
9 - Leaky Feeder Cable MSHA
PBE’s Leaky Feeder Cable is Part of the PBE Leaky Feeder System
which provides a highly effective and safe underground communication system
a b c d e
The image above shows a stripped Leaky Feeder cable with: a) Outer sheath; b) Fire retardant sheath;
c) Foam dielectric; d) 16 Helical wound copper strands; e) Center conductor
PBE’s Leaky Feeder cable has a foam dielectric, which not only
makes the cable more robust, it prevents water from entering
the inner core of the cable. Air dielectric leaky feeder cables
ENG_TS-0009-001_PBE Leaky Feeder Cable_Let
S PECIFICATIO NS
Impedance: 75 ohm ±3
Acceptance: “FT-1” fire test in accordance with CSA C22.2 No. 0.3-M1985. Under EMR Certificate No. 903 is deemed to comply
with the relevant provisions of CSA Standard C22.2 No. 157-M1987 “Intrinisically Safe and Non-Incendive equipment for use in
hazardous locations.” BS 4066: Part 1: 1980/IEC 322-1: 1979/UNE 20-432-82 Part 1. Test on electric cables under fire conditions.
Method of test on a single vertical insulated wire or cable. UL 1581 VW-1 (vertical-Wire) flame test.
MSHA schedule 2 G (30 CFR, Part 12) and is printed with the approval number P-117-16 MSHA.
www.pbegrp.com