Professional Documents
Culture Documents
Midea VRF Controller
Midea VRF Controller
Wired controller
Remote controller
Midea VRF Controllers
01 / Individual control
02 / Centralized control
03 / Network control
04 / Accessories
6
Individual Controller
R51
Function:
•Mode Selection: Auto, Cool, Dry, Heat, Fan Only
•Temp. Setting Range: 17℃ To 30℃
•Daily Timer Setting
•Louver Swing
•Fan Speed Control: H/M/L/Auto
•*Eco operation mode
Eco
*The function with the star matches with the corresponding indoor units.
Wireless Remote Controller
RM05
Feature:
•Background light
Function:
• New appearance
• All basic functions is the same as R51/E
• For V4 plus indoor units, can set indoor units address
*The function with the star matches with the corresponding indoor units.
How to address via RM05
• *Address setting:
1.Pull the cover down , then use a pin press the
LOCK button for 5 seconds.
2. Press ON/OFF button one time
3. press up/down button can select the address
code
4. then press the FAN mode button can send the
address code to indoor unit wireless receiver,
and the indoor unit will make a beep sound
5. Press the LOCK button for 5 seconds to exit the
address setting mode
*The function with the star matches with the corresponding indoor units.
Wireless Remote Controller
RM02
Feature:
•Background-light display, compact dimension
Function:
•Mode selection: Auto, Cool, Dry, Heat, Fan only
• Temp. setting range: 17 ℃ to 30 ℃
• Eco operating mode
• One-key 26 ℃
• Keyboard locking
• Address setting( FAN SPEED+ECO for 5s)
• *FOLLOW ME
• **VR4+ auto mode
* Point the RM02 to the IDU to carry on the FOLLOW ME function.
**The function with the double star matches with the corresponding
indoor units.
BriefConclusion:
Brief conclusion
Function RM02 RM05 R51 R06
Time display × √ × ×
Controller lock √ √ √ √
Eco operation √ √ √ ×
Swing function √ √ √ √
Background-light √ √ √ √
Daily timer × × √ √
Address setting √ √ × ×
FOLLOW ME √ × × ×
Mode selection √ √ √ √
Wired Controller
KJR-10B/KJR-12B KJR-90A/ 90A1
Wired Controller
KJR-12B
• FOLLOW ME
KJR-90A/E
Feature:
• All basic function as the same as KJR-10B
• Small size and Easy for installation
• The size is: 90*86*13 mm
98
KJR-90A1/E
Feature:
• Without mode select function
• Cooling only controller
1) Only can select ON/OFF, Temp, Swing, and Timer
2) Avoid mode conflict
• Other functions are the same with KJR-90A/E
Without
Mode
Selection
Wired Controller
KJR-120A/B-E
Feature:
• All basic function as the same as KJR-10B
• Real time display
• Check indoor unit status
• 10℃ heat function
• Cool-only or heat-only mode selection
• Auto mode for the VR4+ units
• Auto restart
• Filter cleaning reminder
Wiring diagram
Wired Controller
KJR-86
Feature:
• All basic control function
• One key 26℃
• Mode button hidden, avoid mode conflict
• Auto restart
• Press UP and DOWN button to select the mode
Wired Controller
KJR-29B
Feature:
• All basic control function
• One key 26℃
• Filter cleaning reminder
• Auto restart
• Wireless signal receiver
• Address setting
How to address via KJR-29B
*Address setting:
1. Press UP and DOWN buttons together for 8
seconds
2. Press ON/OFF button one time
3. press UP/DOWN button can select the address
number
4. Then press the MODE button can send the address
code to indoor unit wireless receiver, and the
indoor unit will make a beep sound
2. Press the OK button to exit the address setting
*The function with the star matches with the corresponding indoor units.
Wired Controller
KJR-29B KJR-29A
Brief Conclusion
Function KJR- KJR- KJR- KJR- KJR- KJR-29 KJR-86
10B 12B 90A 90A1 120A
Time display × √ × × √ √ ×
Controller lock √ √ × × √ √ ×
Eco operation √ √ × × √ × ×
Swing function √ √ √ √ √ √ ×
Error code × × × × √ × ×
display
Background × √ × × √ √ √
light
Daily timer √ × √ √ √ × ×
FOLLOW ME × √ × × × × ×
Fan speed √ √ √ √ √ √ √
control
Mode selection √ √ √ × √ √ ×
Centralized Controller
CCM03
Feature:
• Memory function: It can record the running
parameters (mode/fan speed/temp.) when using the
controller to turn on the indoor units, all the unit will
work as the last setting.
• Automatically record all setting info when lose
power
• RS485 communication
• Clear & bright LCD display screen,
• background light, more parameters display
• Emergency ON/OFF control with simple dry contact
input
Centralized Controller
Old
Under side outlet
Address code: 0 ~ F
220V/AC
F1, F2, E
Emergency stop
(Connect to CCM03 or PC)
Centralized Controller
Lock RC
LOCK (Mode lock, lock remote controller, Increase / Decrease the setting temp. when SET
lock the Keyboard Scroll pages of parameters when QUERY
LOCK (Mode lock, lock remote controller, Increase / Decrease the setting temp. when SET
lock the Keyboard Scroll pages of parameters when QUERY
2 1
LOCK (Mode lock, lock remote controller, Increase / Decrease the setting temp. when SET
lock the Keyboard Scroll pages of parameters when QUERY
2 1
If the air conditioner is running within the set period of the weekly timer and
there is other control device to control the air conditioner, the air-conditioner
will run according to the set parameter of the control devices (such as remote
controller, line controller and weekly-timer central controller) till to the next set
period of the weekly timer.
If the set mode of a period is Off, it means the weekly timer function of this
period is invalid.
CCM09 Wiring
To power
supply
To indoor unit
old
Remote ON/OFF
KJR-90B Feature:
• Centralized Control
Short press :
Only turn ON/OFF the last time operated indoor units.
Long press (3 seconds) :
Can Turn ON/OFF all indoor units.
• Operation Mode Selection Switch (Cooling, Heating)
• Overall/mono-control the indoor units
• Sleep function and memory function
25 seconds after operation, system would enter sleep
Max. 16 units mode, all indicators blink
Press any key to recovery the display.
• Compatible with central control.
Wiring Diagram
Control at most 16 indoor units
Indication A1 A2 A3 A4 B1 B2 B3 B4
Network address 0 1 2 3 4 5 6 7
Indication C1 C2 C3 C4 D1 D2 D3 D4
Network address 8 9 10 11 12 13 14 15
Centralized Controller
KJRF-180A Feature:
• NEWLY deigned Indoor CCM, similar like CCM03
• Max. 16 IDUs (including one of them is Heat pump
water heater) group control
• Easier for installation in the wall. Complete cabinet
at the rear
• Suitable for the home comfort
• Multiple kind of indoor units control integrated
inside
• Auto restart
Centralized Controller
KJR-180A
CCM02
Feature:
• RS485 communication
• Up to 8 systems, max.32 outdoor units can be
centralized monitored
• It can display the operating parameters of outdoor
units
• It can display the error or protection code of outdoor
units
Max. 8 systems
Address setting method
pressing the Address set button repeatedly ,the address will be increased one by one.
When the address is equal MAX.31and you press once more ,the address will restart
from16.
Indicator Display Address code: 16 ~ 31
FOLLOW ME × × × × ×
Fan speed control √ √ × √ ×
Mode selection √ √ √ √ ×
Brief conclusion(continued):
Power
Fire alarm
Compatible with the main BMS systems, such as Johnson Controls, Siemens, Honeywell and
Schneider.
Network monitoring and gateway:
Gateways
Software
CCM07
Feature:
• Cooperated with network software
• Connect Midea A/C system to BMS system
through LonWorks protocol
Available BMS
LonWorks Gateway
System sketch
Indoor side
Control system
Outdoor side
BMS gateway
Indoor side X, Y, E Max. 64 X, Y, E
units
CCM03
F1,F2,E
Max. 16
systems
X, Y, E Max. 64 X, Y, E
units
CCM03
F1,F2,E
PC
Outdoor side
PC
F1,F2,E
O,A,E O,A,E
CCM02
Max. 32
K1, K2, E units K1, K2, E
Max. 16
systems
F1,F2,E
O,A,E O,A,E
CCM02
Max. 32
K1, K2, E units K1, K2, E
Corresponding devices
If you want to connect A/C system to BMS system (Lonworks with CCM07),
you can select:
CCM07 is used together with the above accessories to realize BMS connection.
Gateway
CCM08 Feature:
• BACNET protocol network
• Max connecting 4 group air-conditions(each
group can connect Max.64 indoor units or 32 outdoor
units) directly
• Web Access Function
Available BMS
BACnet Gateway
System sketch
Web access
Change settings
Operation status
Corresponding devices
If you want to connect A/C system to BMS system (BACnet), you can select:
CCM03
*CCM02(necessary if monitoring the ODU
or electricity fee calculation is needed)
*Electricity meter(necessary if the
electricity fee calculation is needed)
*Midea 3rd generation network monitoring
system(compatible with CCM08)
Feature:
• Bridge the Midea AC system to the Modbus BMS
• Compose a Modbus network of up to 1024 IDU
and 64 ODU
• Transfer in the RTU mode
Modbus Gateway
System sketch
Modbus master
Corresponding devices
If you want to connect A/C system to BMS system via the Modbus gate way,
you can select:
CCM03;
CCM02
Gateway
Feature:
• Directly bridge the IDU to the LonWorks network
• One gateway bridge up to 64 IDU
• CCM03 is unnecessary
LonWorks Gateway
(MD-LonGW64/E)
System sketch
X/Y/E
BMS
(LonWorks ……
protocol)
X/Y/E
……
LonWorks bus
Accessories
Feature:
MD-NIM05 • A smart way to save energy and money.
When the Card Key is in place, the air conditioner is
activated.
When the Card Key is removed, the air conditioner
switches off, to avoid cooling an unoccupied room
and save energy.
• Special design for hotel guest room, working
with hotel card system .
• Notice : Suits all wired controller and KJR-10B
/12B / 90A wired controllers.
Hotel inserting card module
Hotel card-key
Hotel card-key
Indoor PCB
Receiver
Cable 1
KJR-10/12B
MD-NIM05
Accessories
Feature:
MD-NIM09 The infrared sensor is suitable to be used
in hotel, office, conference room,
residence, etc.
When someone into the room, air
conditioning automatic startup, no one
activities will be off. It controls the AC’s
on/off by the infrared that our body has
delivered.
Function
KJR-32B
Feature:
• Design for outdoor alarm and monitoring
• Access to network monitoring system
• 220V power input
• 220V AC output for the alarm device
Feature:
• Calculate outdoor unit Electrical charge
• Notice: one outdoor unit cooperate one
digital Kilowatt Hour Meter
• Can be fixed inside the product in our
factory
• *Compatible power: 380V-3N~50Hz,
380V-3N~60Hz,
220V-3N~60Hz
* Different type power meters match different
power forms.
Applications
• We recommend:
CCM03+CCM02+Control Software for whole hotel,
KJR10+NIM05 + (KJR-90A1+KJR90B) for each room