Professional Documents
Culture Documents
Logan_Series_70_and_150_Overshots
Logan_Series_70_and_150_Overshots
sales@loganoiltools.com
Texas
101 Commerce Street
Alice, TX 78332
Tel: (361) 396-0139
Fax: (361) 396-0112
Utah
1369 South 1100 East
Vernal, UT 84078
Tel: (435) 781-2856
Fax: (435) 781-2858 www.loganoiltools.com Series 70 and 150 Overshots
Illustrations
Spiral Grapple with Spiral Grapple Control
and Type A Packer........................................................6, 12
Basket Grapple with Basket Grapple Control.......................12
Basket Grapple with Mill Control Packer..........................6, 12
Complete Assemblies and Parts Lists..........................13 – 29
Overshot Accessories
Extension Subs....................................................................30
Oversized Guides.................................................................31
Wallhook Guides..................................................................32
Mill Guides............................................................................33
Mill Control Packer Inner Seals....................................34 – 35
Mill Control Packer Outer Seals...................................36 – 37
Type E Mill Control Packers.........................................38 – 39
High Pressure Mill Control Packers......................................40
High Pressure Pack-off Assemblies.....................................41
Lock Rings and Spacers......................................................42
Calculated Strengths....................................................43 – 45
Logan Series 70 Short Catch & Series 150 Releasing & Circulating Overshots Logan Series 150 Releasing & Circulating Overshots
Series 70 Short Catch Overshots
Top Sub
Bowl
Basket Grapple
MAXIMUM CATCH SIZE (Basket) 1-5/8 2-1/2 2-5/8 3-1/16 3-1/16 3-1/16 * 3-3/8
OVERSHOT O.D. 2-5/16 3-5/8 3-3/4 3-15/16 4-5/8 4-1/8 4-3/8
TYPE SH SH SH SH FS SH SH
COMPLETE ASSEMBLY Logan Part No. 170-231-D 170-363-D 170-375-D 170-394-D 170-463-A 170-413-D 170-438-D
Bowen No. 38506 17615 13535 63892 11290 10434 C-11023
TOP SUB Logan Part No. C1000 C1001 C1002 C10025 C1003 C1004 C10045
Bowen No. 38507 17616 13536 63893 11295 10435 A-11024
BOWL Logan Part No. C2000 C2001 C2002 C20025 C2003 C2004 C20045
Bowen No. 38508 17617 13537 63894 11291 10436 B-11025
BASKET GRAPPLE Logan Part No. C3000 C3001 C3002 C30025 C3003 C3004 C30045
Bowen No. 38509 17618 13538 63895 11292 10437 B-11026
BASKET GRAPPLE CONTROL Logan Part No. C4000 C4001 C4002 C40025 C4003 C4004 C40045
Bowen No. 38510 17619 13539 63896 11294 10438 A-11027
MAXIMUM CATCH SIZE (Basket) 3-21/32 3-21/32 3-3/4 3-3/4 4-1/4 4-3/4 5-1/4
OVERSHOT O.D. 4-11/16 5-5/8 4-3/4 5-1/2 5-3/4 5-7/8 6-1/4
TYPE SH FS SH FS FS SH SH
COMPLETE ASSEMBLY Logan Part No. 170-468-D 170-563-A 170-475-D 170-550-A 170-575-A 170-587-D 170-625-D
Bowen No. 10543 11297 12645 12785 13065 10560 14805
TOP SUB Logan Part No. C1005 C1006 C1005 C1008 C1009 C1010 C10105
Bowen No. 10544 11298 10544 12786 13066 10561 14806
BOWL Logan Part No. C2005 C2006 C2007 C2008 C2009 C2010 C20105
Bowen No. 10545 11299 12646 12787 13067 10562 14807
BASKET GRAPPLE Logan Part No. C3005 C3006 C3007 C3008 C3009 C3010 C30105
Bowen No. 10546 11300 12647 12788 13068 10563 14808
BASKET GRAPPLE CONTROL Logan Part No. C4005 C4006 C4007 C4008 C4009 C4010 C40105
Bowen No. 10547 11301 12648 12789 13069 10564 14809
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Notes: Grapples are available in 1/16" intervals.
Calculated strengths
MAXIMUM CATCH SIZE (Basket) 1-5/8 2-1/2 2-5/8 3-1/16 3-1/16 3-1/16 3-3/8
OVERSHOT O.D. 2-5/16 3-5/8 3-3/4 3-15/16 4-5/8 4-1/8 4-3/8
COMPLETE ASSEMBLY Logan Part No. 170-231-D 170-363-D 170-375-D 170-394-D 170-463-A 170-413-D 170-438-D
Bowen No. 38506 17615 13535 63892 11290 10434 C-11023
BOWL Logan Part No. C2000 C2001 C2002 C20025 C2003 C2004 C20045
Bowen No. 38508 17617 13537 63894 11291 10436 B-11025
BASKET GRAPPLE LOAD CAPACITY @ YIELD POINT (LBS):
MAX. CaPACITY WITH STOP … … 239,800 … 398,100 212,700 …
MIN. CAPACITY Without Stop 85,200 263,600 239,800 224,600 398,100 212,700 250,300
MAX. MAKE-UP TORQUE 50% OF YIELD (FT/LBS) 600 2,550 2,800 … … 4,000 4,600
MAXIMUM CATCH SIZE (Basket) 3-21/32 3-21/32 3-3/4 3-3/4 4-1/4 4-3/4 5-1/4
OVERSHOT O.D. 4-11/16 5-5/8 4-3/4 5-1/2 5-3/4 5-7/8 6-1/4
COMPLETE ASSEMBLY Logan Part No. 170-468-D 170-563-A 170-475-D 170-550-A 170-575-A 170-587-D 170-625-D
Bowen No. 10543 11297 12645 12785 13065 10560 14805
BOWL Logan Part No. C2005 C2006 C2007 C2008 C2009 C2010 C20105
Bowen No. 10545 11299 12646 12787 13067 10562 14807
BASKET GRAPPLE LOAD CAPACITY @ YIELD POINT (LBS):
MAX. CaPACITY WITH STOP 197,600 635,700 267,100 504,500 467,400 306,200 …
MIN. CAPACITY Without Stop 197,600 790,500 267,100 558,100 575,600 348,200 319,700
MAX. MAKE-UP TORQUE 50% OF YIELD (FT/LBS) 5,000 … … … 7,400 … 8,100
Notes:
1) All strengths are calculated theoretical yield points and are accurate within 20%. All strengths assume a straight, steady pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
2) No tong marks should be applied to the bowl. Tong marks and other surface damage to the bowl will also reduce the strength.
3) Maximum recommended makeup torque is 50% of yield. Less torque may be used depending upon the situation.
Top Sub
Type A Packer
Type A Packer
Bowl
Spiral Grapple
Spiral Grapple Control
Standard
Cut-lipped Guide
Spiral Grapple
Top Sub
Bowl
Inner Seal
tured to match a specific basket grapple Overshot Accessories If the upper end of the fish is unengage-
size. One mill control packer should be Logan Series 150 Releasing and Circu- able, install an extension sub (refer to
ordered for each size of basket grapple lating Overshots can be equipped with a page 30) between the top sub and the
that has been ordered. wide range of accessories, including: bowl.
For areas with extreme pressure, refer • Extension Subs (page 30) Connect the overshot to the fishing
to the special Logan Series 150 High • Oversized Guides (page 31) string by the top sub and run it into the
Pressure Mill Control Packers and High • Wallhook Guides (page 32) hole.
Pressure Pack-off Assemblies listed on • Mill Guides (page 33)
The Logan Series 150 Releasing and
pages 40 – 41 for more information. • Inner Seals for Mill Control Packers
Circulating Overshot requires right-
(pages 34 – 35)
hand rotation only, during both engag-
Type R Mill Control Packer • Outer Seals for Mill Control Packers
ing and releasing operations. The right-
When an overshot is dressed with a mill (pages 36 – 37)
hand-only rotation feature eliminates
control packer and pack-off is required, • Type E Mill Control Packers
the possibility of accidental left-hand
a Type R Mill Control Packer is most (pages 38 – 39)
unthreading.
commonly used. The mill control packer • High Pressure Mill Control Packers
is constructed with a molded inner (page 40)
Catching a Fish
seal and a replaceable outer seal that • High Pressure Pack-off Assemblies
pro-vide a positive seal around the fish. (page 41) CAUTION: Always shut off the cir-
Seals may be replaced in the field if • Lock Rings and Spacers (page 42) culating pumps before lowering the
required. (Refer to pages 34 – 37 for overshot over the fish.
Refer to the pages indicated for more
Inner and Outer Seal part numbers.)
detailed information about these parts. Never rotate the fishing string to the
left while the overshot is engaged
OPERATION with a fish unless an upward strain
is maintained.
Properly assemble the overshot and
dress it with the correct size grapple. Slowly rotate the Logan Series 150
Inner Seal
Ensure that all parts are in good, work- Releasing and Circulating Overshot
ing condition. assembly to the right while it is lowered
over the fish. It is important to combine
In fishing operations, the Logan Series
rotation and lowering after the overshot
Outer Seal 150 Releasing and Circulating Overshot
has reached the top of the fish and as
will function in the same manner, wheth-
The plain control packer is used when the fish enters the expandable grapple.
er using a spiral or basket grapple.
the milling operation has preceeded The guide will direct the fish into the
the fishing operation. The mill control Install undersized parts if the fish is overshot. The grapple will expand,
packer should be used when the fish smaller than the maximum outside di- allowing the fish to pass through it and
requires light dressing prior to engage- ameter the overshot can engage. (Refer the pack-off rubber. The fish will stop
ment. Only one control packer can be to tables on pages 13 – 29.) when it makes contact with the pin end
installed in the overshot assembly at of the top sub. If engaging an external
In hole sizes that are significantly larger
one time. upset section with a basket grapple, the
than the fish size, install an oversized
fish will be stopped by the solid metal
guide (refer to page 31) or a wallhook
Type E Control Packer stop in the upper end of the basket
guide (refer to page 32) to prevent the
The Type E Control Packer is con- grapple. With the fish properly posi-
overshot from passing the fish.
structed with a molded inner seal and tioned in the grapple, allow the right-
a replaceable outer seal. They are Replace the standard guide with the hand twist to slack out of the string.
available in two styles: plain and mill. proper mill guide if the top of the fish
Cease rotation and exert an upward
is heavily burred or jagged. (Refer to
Outer seals may be replaced in the pull on the fishing string to fully capture
Mill Guides on page 33.)
field. (Refer to pages 36 – 37 for Outer the fish. The upward pull contracts the
Seal part numbers.) tapers in the bowl, thereby gripping
the fish with the grapple and holding it
secure.
If the fish does not advance, maintain Spiral grapples and type A packers The BOP must have at least two sets
an upward strain on the fishing string should be changed for each size of fish. of rams — a set of lower pipe rams and
and turn on the circulating pumps to They will effectively catch and pack-off set of shear rams above them. Land the
force fluid through the fish. With the fish a worn fish as much as 3/32" under, closest tool joint on the lower pipe rams.
securely positioned, circulation seals and approximately 1/32" over, the catch Close the lower pipe rams to suspend
the pack-off rubber around the fish size of the grapple. and pack-off the string before shear-
to prevent fluid from passing down the ing. Shearing produces flattened, flared
Some overshots, especially Logan Oil
outside. The pumps build pressure ends with protruding ears.
Tools code “D” slim hole (SH) type over-
to force fluid down through the fish.
shots, can effectively catch a fish that The string is retrieved when the rig
is no more than 1/16" under maximum. returns to the well site. The end is
Releasing a Fish
brought to the surface and the sheared
CAUTION: Before beginning releas- Undersized Basket Parts piece is removed. Often large sections
ing operations, always bump down Undersized basket parts (basket grap- of the BOP stack must be brought to the
the full weight of the fishing string. ples and mill control packers) are used surface as well for effective retrieval,
to catch sizes smaller than the “Maxi- making subsea sheared pipe retrieval
A sharp downward force (bump) is ap-
mum Catch Size (Basket).” (Refer to a costly, difficult, and time-consuming
plied to break the hold of the grapple
tables on pages 13 – 29.) Basket grap- task.
within the bowl. The downward force
ples will effectively catch and pack-off a
positions the largest portion of the bowl By removing the standard guide, grap-
worn fish as much as 3/32" under, and
tapers opposite the grapple and breaks ple, and packer, the Logan Series 150
approximately 1/32" over, the maximum
the hold.The Logan Series 150 Releas- Releasing and Circulating Overshot
catch sizes listed.
ing and Circulating Overshot is then can be dressed with a mill extension
rotated to the right and slowly elevated Some overshots, especially Logan Oil and special flat-bottomed guides (refer
to release the grapple from the fish. Tools code “D” slim hole (SH) type over- to Mill Guides on page 33) to retrieve
As the overshot rotates to the right, the shots, can effectively catch a fish that sheared pipe in an economical, simple,
friction of the fish against the grapple is more than 1/32" under size. and time-saving manner.
causes it to unwind and expand. Con-
Basket grapples and mill control pack- Before installing the overshot on the
tinue simultaneous right-hand rotation
ers should be changed for each size drill string, dress it with a mill extension
while slowly elevating the fishing string
of fish. A plain basket grapple control and a flat-bottomed, long guide. The
until the overshot has cleared the fish.
does not need to be changed to a mill tapered milling ribs of the mill extension
Combined rotation and elevation is very
control packer when using an under- are faced with sintered tungsten carbide
important.
sized basket grapple. on the inner diameter. The overshot is
then lowered into the BOP and over the
Undersized Spiral Parts
Subsea Retrieval end of the drill pipe. Rotation mills down
When a fish is smaller than the speci-
On offshore floating rigs, drill string the flared ends and protruding ears of
fied maximum catch size of the over-
extends hundreds of feet from the rig the sheared pipe. The end of the long
shot, undersized parts are used.
to the wellhead blowout preventer guide (and the short guide) is faced with
Undersized spiral parts (spiral grapples (BOP) on the sea floor. Sometimes it soft metal so it will not damage the BOP
and Type A packers) are used to catch is necessary for the rig to move (in the pipe rams if it inadvertently comes into
fish sizes between the “Maximum Catch event of a blowout, an approaching contact with them.
Size (Spiral)” to the “Maximum Catch storm, or drifting due to loss of anchor)
The long length of the guide also pre-
Size (Basket).” (Refer to tables on from a well site. In these situations, the
vents the mill extension from touching
pages 13 – 29.) drill string can be temporarily severed
and causing damage to the tool joint in
inside the BOP to remove only the up-
the BOP. This is of utmost importance
per end.
as the outer diameter of this joint is
where the string will be engaged.
After milling is completed, The Logan Exert an upward pull on the overshot
Series 150 Releasing and Circulating to ensure enagement. Then retract the
Overshot is elevated to the surface. It BOP pipe rams. Raise the string to the
is then dressed with a flat-bottomed rig floor and remove the severed joint.
short guide, an extension sub, a basket Replace the joint and resume normal
grapple, and a mill control packer sized operations.
to engage the tool joint. The overshot is
Logan Sheared Pipe Retrieval Overshot
lowered again. As the BOP is entered,
assemblies are available for all sizes
the milled flare-end will pass through
of drill pipe and BOPs. Please inquire.
the grapple and the mill control packer.
Once in the extension sub, the grapple
will engage and pack-off the tool joint.
Type A Packer
Bowl
Bowl Bowl
Spiral Grapple with Spiral Grapple Control Basket Grapple Basket Grapple
and Type A Packer with Basket Grapple Control with Mill Control Packer
MAXIMUM CATCH SIZE (Spiral) 2 2-1/8 2-3/8 2-3/8 2-3/8 2-1/2 2-1/2
MAXIMUM CATCH SIZE (Basket) 1-3/4 1-3/4 2 1-7/8 1-7/8 2 2
OVERSHOT O.D. 2-5/16 2-5/8 3-1/8 3-1/2 4-1/8 3-3/8 3-5/8
TYPE SH SH XSH FS FS SH FS
COMPLETE ASSEMBLY Logan Part No. 150-231-D 150-263-D 150-313-E 150-350-A 150-414-A 150-338-D 150-363-A
Bowen No. B-8919 C-10199 9305 C-4741 1443 C-4623 C-5080
TOP SUB Logan Part No. A0950 A1000 A1001 A1002 A10025 A1003 A1004
Bowen No. A-8920 A-10200 9311 B-4742 1445 A-5083 A-5081
BOWL Logan Part No. A1950 A2000 A2001 A2002 A20025 A2003 A2004
Bowen No. B-8921 B-10201 9306 B-4743 1446 B-5088 B-5082
STANDARD GUIDE (CUT-LIPPED) Logan Part No. B7008 A3000 A3001 A3002 A30025 A3003 A3004
Bowen No. 9404 A-10206 9312 A-4745 1450 A-5093 A-5087
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 2-7/8 3-1/16 3-1/8 2-7/8 2-7/8 3-1/16 3-1/16
MAXIMUM CATCH SIZE (Basket) 2-1/2 2-11/16 2-5/8 2-3/8 2-3/8 2-9/16 2-9/16
OVERSHOT O.D. 3-5/8 3-3/4 3-7/8 3-3/4 4 3-15/16 4-3/16
TYPE XSH SH SH SH FS SH FS
COMPLETE ASSEMBLY Logan Part No. 150-363-E 150-375-D 150-388-D 150-376-D 150-400-A 150-393-D 150-419-A
Bowen No. 9270 37585 C-1835 C-1827 C-4736 C-5101 C-5098
TOP SUB Logan Part No. A1005 A10055 A10056 A10057 A1006 A1007 A1008
Bowen No. 9276 37586 A-1842 A-1834 A-4737 A-5102 A-5099
BOWL Logan Part No. A2005 A20055 A20056 A20057 A2006 A2007 A2008
Bowen No. 9271 37587 B-1836 B-1828 B-4738 B-5103 B-5100
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3005 A30055 A30056 A30057 A3006 A3007 A3008
Bowen No. 9275 37592 A-1841 A-1833 A-4740 A-3598 A-4405
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 3-1/8 3-1/8 3-1/8 3-1/8 3-1/4 3-1/4 3-1/4
MAXIMUM CATCH SIZE (Basket) 2-5/8 2-5/8 2-5/8 2-5/8 2-3/4 2-3/4 2-3/4
OVERSHOT O.D. 4 4-1/8 4-1/8 4-1/4 4-1/8 4-3/8 4-3/8
TYPE SH FS FS FS SH FS FS
COMPLETE ASSEMBLY Logan Part No. 150-400-D 150-413-A 150-412-A 150-425-A 150-413-D 150-437-A 150-438-A
Bowen No. C-5104 9105 8220 C-4822 C-5115 9630 C-5112
TOP SUB Logan Part No. A1009 A1010 A10105 A1011 A1012 A10125 A1013
Bowen No. A-5105 9106 8221 A-4823 A-5116 9631 A-5113
BOWL Logan Part No. A2009 A2010 A20105 A2011 A2012 A20125 A2013
Bowen No. B-5106 9107 8223 B-4824 B-5117 9632 B-5114
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3009 A3010 A3010 A3011 A3012 A30125 A3013
Bowen No. A-5111 1746 1746 A-793 A-5122 1519 A-3207
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 3-3/8 3-3/8 3-3/8 3-3/8 3-1/2 3-1/2 3-1/2
MAXIMUM CATCH SIZE (Basket) 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8
OVERSHOT O.D. 3-7/8 4-1/4 4-3/8 4-1/2 4-3/8 4-13/16 4-1/2
TYPE XSH SH FS FS SH FS SH
COMPLETE ASSEMBLY Logan Part No. 150-388-E 150-425-D 150-4375-A 150-450-A 150-438-D 150-482-A 150-451-D
Bowen No. 21300 C-5126 9635 C-5123 C-4619 C-4732 C-3793
TOP SUB Logan Part No. A10135 A1014 A10145 A1015 A1016 A1017 A10161
Bowen No. 21301 A-5127 9636 A-5124 A-4620 A-4733 A-3794
BOWL Logan Part No. A20135 A2014 A20145 A2015 A2016 A2017 A20161
Bowen No. 21302 B-5128 9637 B-5125 B-4621 B-4734 A-3795
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A30135 A3014 A30145 A3015 A3016 A3017 A30161
Bowen No. 21307 A-4629 4197 A-3361 A-4622 A-4735 A-3609
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 3-21/32 3-21/32 3-21/32 3-21/32 3-3/4 3-3/4 3-13/16
MAXIMUM CATCH SIZE (Basket) 3-1/8 3-1/8 3.220 3-1/8 3-7/32 3-1/4 3-5/16
OVERSHOT O.D. 4-17/32 4-9/16 4-11/16 5 4-5/8 4-11/16 4-7/16
TYPE SH SH SFS FS SH SFS SH
COMPLETE ASSEMBLY Logan Part No. 150-450-D 150-456-D 150-469-C 150-500-A 150-463-D 150-468-C 150-444-D
Bowen No. 17201 C-5151 9109 C-5148 C-5129 9120 C-9773
TOP SUB Logan Part No. A10175 A1018 A1019 A1020 A1021 A1019 A10217
Bowen No. 17202 A-5152 9110 A-5149 A-5130 9110 A-9774
BOWL Logan Part No. A20175 A2018 A2019 A2020 A2021 A20215 A20217
Bowen No. 17203 B-5153 9111 B-5150 B-5131 9121 B-9775
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A30175 A3018 A3019 A3020 A3021 A30215 A30217
Bowen No. 17204 A-4341 6667 A-4412 A-5135 9125 A-9779
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 4-1/4 4-1/4 4-1/4 4-1/4 4-1/2 4-1/2 4-5/8
MAXIMUM CATCH SIZE (Basket) 3-3/4 3-3/4 3-11/16 3-11/16 3-7/8 3-7/8 4-1/8
OVERSHOT O.D. 5-1/8 5-1/8 5-9/16 5-9/16 5-3/8 5-13/16 5-1/2
TYPE SH SH FS FS SH FS SH
COMPLETE ASSEMBLY Logan Part No. 150-513-D 150-512-D 150-556-A 150-555-A 150-538-D 150-581-A 150-550-D
Bowen No. C-5162 4716 5896 C-4819 C-5165 C-4814 C-4969
TOP SUB Logan Part No. A1028 A10285 A1029 A10295 A1030 A1031 A10315
Bowen No. A-5163 4718 5897 A-4820 A-5166 A-4815 A-4970
BOWL Logan Part No. A2028 A20285 A2029 A20295 A2030 A2031 A20315
Bowen No. B-5164 4717 5898 B-4821 B-5167 B-4816 B-4971
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3028 A30285 A3029 A30295 A3030 A3031 A30315
Bowen No. A-4676 4719 187 L-187 B-2491 B-1989 M-1138
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 4-5/8 4-5/8 4-3/4 4-3/4 4-3/4 4-7/8 4-7/8
MAXIMUM CATCH SIZE (Basket) 4-1/8 4 4-1/4 4-1/4 4-1/8 4-1/4 4-1/4
OVERSHOT O.D. 5-5/8 5-15/16 5-5/8 5-3/4 6-1/16 5-3/4 6-1/8
TYPE FS FS SH FS FS SH FS
COMPLETE ASSEMBLY Logan Part No. 150-563-A 150-594-A 150-563-D 150-575-A 150-606-A 150-575-D 150-613-A
Bowen No. 5698 5737 C-5168 8975 C-4829 C-7096 912
TOP SUB Logan Part No. A1032 A1033 A1034 A1035 A1036 A1037 A10375
Bowen No. 5699 5738 A-5169 8976 A-4830 A-7097 908
BOWL Logan Part No. A2032 A2033 A2034 A2035 A2036 A2037 A20375
Bowen No. 5700 5735 B-5170 8977 B-4831 B-7098 905
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3032 A3033 A3034 A3035 A3036 A3037 A30375
Bowen No. 1143 192 B-2203 6121 B-2366 A-6391 1186
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 5-1/2 5-1/2 5-3/4 5-3/4 6 6-1/8 6-1/8
MAXIMUM CATCH SIZE (Basket) 4-7/8 4-3/4 5-1/8 5 5-1/4 5-1/2 5-3/8
OVERSHOT O.D. 6-5/8 7-1/8 6-7/8 7-3/8 7-5/8 7-1/4 7-3/4
TYPE SH FS SH FS FS SH FS
COMPLETE ASSEMBLY Logan Part No. 150-663-D 150-713-A 150-688-D 150-738-A 150-763-A 150-725-D 150-775-A
Bowen No. 8625 C-5176 8978 C-4689 7572 C-5206 C-5204
TOP SUB Logan Part No. A1041 A1042 A1043 A1044 A1045 A1046 A1047
Bowen No. 8626 A-5177 8979 A-4690 7573 A-5207 A-5205
BOWL Logan Part No. A2041 A2042 A2043 A2044 A2045 A2046 A2047
Bowen No. 8617 B-2791 8980 B-3522 7574 B-5208 B-4218
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3041 A3042 A3043 A3044 A3045 A3046 A3047
Bowen No. 8621 A-761 6701 L-120 218 A-5213 A-2065
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 6-1/4 6-1/4 6-1/4 6-1/4 6-1/4 6-3/8 6-3/8
MAXIMUM CATCH SIZE (Basket) 5-5/8 5-9/16 5-9/16 5-9/16 5-1/2 5-3/4 5-5/8
OVERSHOT O.D. 7-3/8 7-5/8 7-5/8 7-7/8 7-7/8 7-1/2 7-3/4
TYPE SH SFS SFS FS FS SH SFS
COMPLETE ASSEMBLY Logan Part No. 150-738-D 150-762-C 150-763-C 150-777-A 150-788-A 150-750-D 150-775-C
Bowen No. 9692 1873 8741 7791 C-2108 9009 9163
TOP SUB Logan Part No. A1048 A10485 A1049 A10495 A1050 A1051 A1052
Bowen No. 9693 118 8742 7793 B-2106 9010 9165
BOWL Logan Part No. A2048 A20485 A2049 A20495 A2050 A2051 A2052
Bowen No. 9694 1875 1641 1657 B-2109 9011 9164
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3048 A3049 A3049 A30495 A3050 A3051 A3052
Bowen No. 9691 5525 5525 1493 A-2075 9007 5506
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 6-1/2 6-1/2 6-5/8 6-5/8 6-3/4 6-3/4 6-7/8
MAXIMUM CATCH SIZE (Basket) 5-7/8 5-3/4 6 5-7/8 6-1/8 6 6-1/4
OVERSHOT O.D. 7-5/8 8-1/8 7-3/4 8-1/4 7-7/8 8-3/8 8
TYPE SH FS SH FS SH FS SH
COMPLETE ASSEMBLY Logan Part No. 150-763-D 150-813-A 150-775-D 150-825-A 150-788-D 150-838-A 150-800-D
Bowen No. 9860 C-5342 4785 C-3032 C-5222 275 N-8995
TOP SUB Logan Part No. A1053 A1054 A1055 A1056 A1057 A1058 A10587
Bowen No. 9861 A-5343 9133 A-3033 A-5223 276 L-8996
BOWL Logan Part No. A2053 A2054 A2055 A2056 A2057 A2058 A20587
Bowen No. 9862 B-3711 9134 B-3034 B-5224 277 M-8997
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3053 A3054 A3055 A3056 A3057 A3058 A30587
Bowen No. 9867 A-2376 9139 A-1818 A-5229 205 L-8989
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 7-1/4 7-3/8 7-3/8 7-1/2 7-1/2 7-5/8 7-5/8
MAXIMUM CATCH SIZE (Basket) 6-1/2 6-3/4 6-5/8 6-7/8 6-3/4 7 6-7/8
OVERSHOT O.D. 8-7/8 8-1/2 9 8-5/8 9-1/8 8-3/4 9-1/4
TYPE FS SH FS SH FS SH FS
COMPLETE ASSEMBLY Logan Part No. 150-888-A 150-850-D 150-900-A 150-863-D 150-913-A 150-875-D 150-762-A
Bowen No. C-5352 4793 C-5230 C-7101 C-7099 4796 C-5241
TOP SUB Logan Part No. A1062 A1063 A1064 A1065 A1066 A1067 A10675
Bowen No. A-5353 4794 A-5231 A-7102 A-7100 4797 A-5242
BOWL Logan Part No. A2062 A2063 A2064 A2065 A2066 A2067 A20675
Bowen No. M-1026-1 9233 B-5232 B-7103 B-4516 9239 B-5243
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3062 A3063 A3064 A3065 A3066 A3067 A30675
Bowen No. M-1029 4795 A-4158 A-7108 A-3456 4798 A-5248
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
MAXIMUM CATCH SIZE (Spiral) 8-3/8 8-1/2 8-1/2 8-5/8 8-7/8 9 9-5/8
MAXIMUM CATCH SIZE (Basket) 7-5/8 7-7/8 7-3/4 7-7/8 8-1/8 8-1/4 8-7/8
OVERSHOT O.D. 10-1/16 9-5/8 10-1/8 10-1/4 10-1/2 10-5/8 11-1/4
TYPE FS SH FS SH FS FS FS
COMPLETE ASSEMBLY Logan Part No. 150-1006-A 150-963-D 150-1013-A 150-1025-D 150-1050-A 150-1063-A 150-1125-A
Bowen No. C-1230 C-5284 8960 C-5297 C-5305 C-5321 C-12822
TOP SUB Logan Part No. A1074 A1075 A1076 A1077 A1078 A1079 A1080
Bowen No. B-1235 A-5285 8961 A-5298 A-5306 A-5322 A-12823
BOWL Logan Part No. A2074 A2075 A2076 A2077 A2078 A2079 A2080
Bowen No. B-1231 B-5286 8962 B-5299 B-5307 B-5323 B-12824
STANDARD GUIDE (CUT-LIPPED) Logan Part No. A3074 A3075 A3076 A3077 A3078 A3079 A3080
Bowen No. B-1236 A-5291 8959 A-5304 A-5312 A-5328 A-12829
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
OVERVIEW
LENGTHS
EXTENSION SUB OD (INCHES) 24" Long 30" Long 36" Long 42" Long 48" Long 54" Long 60" Long
2 to 2-1/2 Weight … … … … … … …
Over 2-1/2 to 3 Weight … … … … … … …
Over 3 to 3-1/2 Weight … … … … … … …
Over 3-1/2 to 4 Weight … … … … … … …
Over 4 to 4-1/2 Weight 53 64 75 86 97 108 119
Over 4-1/2 to 5 Weight 59 72 84 97 109 122 135
Over 5 to 5-1/2 Weight 66 80 94 108 122 136 150
Over 5-1/2 to 6 Weight 73 88 103 119 134 150 166
Over 6 to 6 1/2 Weight 90 109 128 147 166 185 204
Over 6-1/2 to 7 Weight 102 124 146 168 190 212 234
Over 7 to 7-1/2 Weight 122 148 174 200 226 252 276
Over 7-1/2 to 8 Weight 127 154 181 209 236 263 290
Over 8 to 8-1/2 Weight 140 170 200 230 260 290 320
Over 8-1/2 to 9 Weight 150 182 214 246 278 310 342
Over 9 to 9-1/2 Weight 178 212 246 280 314 348 382
Over 9-1/2 to 10 Weight 166 202 238 274 310 346 382
Over 10 to 10-1/2 Weight 176 214 252 290 328 366 404
Over 10-1/2 to 11 Weight 184 224 264 304 344 384 424
Over 11 to 11-1/2 Weight 207 253 298 343 388 433 478
Over 11-1/2 to 12 Weight 218 266 314 362 410 458 516
Over 12 to 12-1/2 Weight 230 280 330 380 430 480 530
Over 12-1/2 to 13 Weight 245 300 355 410 465 520 575
Logan Oil Tools reserves the right to change or discontinue designs without notice.
OVERVIEW
Logan Oil Tools reserves the right to change or discontinue designs without notice.
OVERVIEW
OD (INCHES) WEIGHTS: 30" Long 36" Long 42" Long 48" Long
Over 5 to 5-1/2 66 94 110 116
Over 5-1/2 to 6 73 102 117 127
Over 6 to 6-1/2 80 110 126 138
Over 6-1/2 to 7 86 117 134 148
Over 7 to 7-1/2 93 126 144 159
Over 7-1/2 to 8 100 135 155 170
Over 8 to 8-1/2 106 145 166 188
Over 8-1/2 to 9 113 155 177 198
Over 9 to 9-1/2 … 166 191 213
Over 9-1/2 to 10 … 177 204 228
Over 10 to 10-1/2 … 189 244 273
Over 10-1/2 to 11 … 201 285 318
Over 11 to 11-1/2 … 214 299 333
Over 11-1/2 to 12 … 227 312 348
Over 12 to 12-1/2 … … 327 366
Over 12-1/2 to 13 … … 343 383
Over 13 to 13-1/2 … … 360 402
Over 13-1/2 to 14 … … 377 421
Over 14 to 14-1/2 … … 391 436
Over 14-1/2 to 15 … … 404 451
Over 15 to 15-1/2 … … 419 467
Over 15-1/2 to 16 … … 433 483
Over 16 to 16-1/2 … … 448 500
Over 16-1/2 to 17 … … 462 516
Over 17 to 17-1/2 … … 479 535
Over 17-1/2 to 18 … … 496 554
Logan Oil Tools reserves the right to change or discontinue designs without notice.
OVERVIEW
TYPE A — Machine cut carburized teeth to mill burrs off tool joints and drill collars
GUIDE O.D. NOT OVER (inches) 3-1/2 4 4-1/2 5 5-1/2 6 6-1/2
Approximate Length of Guide (inches) 8 8 8 8 8 12 1
TYPE B — Fluted with end teeth tapered and straight inside teeth to mill over pipe, upset section, or tool joint that the overshot catches
GUIDE O.D. NOT OVER (inches) 4-1/4 5-1/2 6 7 7-1/2 8 8-1/2
Approximate Length of Guide (inches) 8 8 12 12 12 12 16
TYPE C — Tungsten carbide tapered and straight ID to mill over pipe, upset section, or tool joint that the overshot catches
GUIDE O.D. NOT OVER (inches) 3-1/2 4 4-1/2 5 5-1/2 6 6-1/2
Approximate Length of Guide (inches) 8 8 8 8 8 12 12
GUIDE O.D. NOT OVER (inches) 7 7-1/2 8 8-1/2 9 9-1/2 10
Approximate Length of Guide (inches) 12 12 12 16 16 16 16
Logan Oil Tools reserves the right to change or discontinue designs without notice.
STANDARD – TYPE R
FISH SIZE (inches) 3/4 7/8 1 1-1/8 1-1/4 1-5/16 1.315
Inner Seal L13591 L66814 L12470 L12471 L12472 L14187 L12280
FISH SIZE (inches) 2-1/16 2-1/8 2-1/4 2-5/16 2-3/8 2-1/2 2-5/8
Inner Seal L218114-66 L10805 L10806 L218114-74 L10807 L10808 L10809
FISH SIZE (inches) 2.702 2-3/4 2-13/16 2-7/8 2-7/8 2-7/8 2.900
Inner Seal L10994 L10810 L218114-90 L10811 L10811-100 L10811SH L218114-2.900
FISH SIZE (inches) 3-5/16 3-3/8 3-7/16 3-1/2 3-5/8 3-21/32 3-3/4
Inner Seal L218114-106 L10815 L218114-110 L10816 L10817 L218114-117 L10819
FISH SIZE (inches) 4-1/8 4-1/4 4-1/4 4-3/8 4-1/2 4-5/8 4-5/8
Inner Seal L10822SH L10823 L10823SH L10824 L10825 L10826 L10826SH
Logan Oil Tools reserves the right to change or discontinue designs without notice.
STANDARD – TYPE R
FISH SIZE (inches) 5-5/8 5-3/4 5-7/8 6 6-1/8 6-1/4 6-3/8
Inner Seal L10834 L10835 L10836 L10837 L10838 L10839 L10840
PACKOFF PIPE SIZE 1-1/4 1-1/2 2-1/16 2-3/8 2-3/8 2-7/8 2-7/8
PASS UPSET SIZE 1-13/16 1.900 2.330 2-19/32 2-21/32 3-3/32 3-7/32
Inner Seal L13366 L13317 L13285 L11690 L11690 L11691 L11692
Logan Oil Tools reserves the right to change or discontinue designs without notice.
PACKER Logan Part No. A9950 A9000 A9001 A9002 A90025 A9003 A9004
Bowen No. 9407M B-10202-R 9309-R L-1453-R 1453-R B-5089-R B-3395-R
Outer Seal 568-032 568-226 568-228 568-228 568-228 568-229 568-230
PACKER Logan Part No. A9005 A90055 A90056 A90057 A9006 A9007 A9009
Bowen No. 8550-R 37588-R B-1839-R A-1831-R L-809-RS B-3594-R B-5107-R
Outer Seal 568-233 568-234 568-235 568-233 568-233 568-234 568-234
PACKER Logan Part No. A9010 A9011 A9012 A90125 A9013 A90135 A9014
Bowen No. 809-R L-7090-R B-5118-R 1517-R L-1517-R 21303-R B-4625-R
Outer Seal 568-234 568-235 568-235 568-236 568-236 568-236 568-237
PACKER Logan Part No. A90145 A9015 A9016 A90165 A9017 A9018 A9019
Bowen No. 4185-R L-6515-R L-7065-R 1253-R L-168-R L-6665-R 6665-R
Outer Seal 568-237 568-237 568-238 568-239 568-239 568-239 568-239
PACKER Logan Part No. A9020 A9021 A90215 A90217 A9022 A9023 A90235
Bowen No. B-3219-R B-5538-R 9122-R L-6163-R 811-R 856-R 60947R
Outer Seal 568-239 568-240 568-239 568-238 568-240 568-241 568-241
PACKER Logan Part No. A9024 A9025 A9026 A9027 A90285 A9029 A9030
Bowen No. B-5157-R A-1508-R B-4895-R L-1867-R B-4672-R 169-R B-2487-R
Outer Seal 568-242 568-243 568-242 568-243 568-244 568-244 568-246
PACKER Logan Part No. A9031 A9032 A9033 A9034 A9035 A9036 A9037
Bowen No. B-2199-1R 1140-R 195-R B-2199-R 6114-R B-2362-R B-6387-R
Outer Seal 568-248 568-247 568-349 568-248 568-247 568-248 568-249
PACKER Logan Part No. A90375 A9038 A9039 A90395 A9040 A90402 A90405
Bowen No. 1189-R B-2455-R L-5950-R 5950-R M-4505-RS 11826-R 4505-R
Outer Seal 568-250 568-249 568-250 568-250 568-252 568-251 568-252
Logan Oil Tools reserves the right to change or discontinue designs without notice.
PACKER Logan Part No. A90407 A9041 A9042 A9043 A9044 A9045 A9046
Bowen No. 9209-R L-8618-R A-756-R 6697-R L-110-R 223-R B-5209-R
Outer Seal 568-252 568-253 568-254 568-255 568-359 568-437 568-259
PACKER Logan Part No. A9047 A9048 A9049 A90495 A9050 A9051 A9052
Bowen No. L-1642-R 9689-R 1642-R 1680-R L-1680-R 9005-R 5508-R
Outer Seal 568-259 568-258 568-259 568-438 568-438 568-259 568-260
PACKER Logan Part No. A9053 A9054 A9055 A90555 A9056 A9057 A9058
Bowen No. 9865-R L-6635-R 9136-R 1634-R A-1814-R B-5225-R 207-R
Outer Seal 568-259 568-439 568-260 568-260 568-260 568-261 568-261
PACKER Logan Part No. A90587 A9059 A90595 A9060 A90605 A9061 A9062
Bowen No. L-8985-R 9224-R L-6310-R L-111-R 9231-R B-5357-R L-1025-R
Outer Seal 568-261 568-261 568-262 568-441 568-262 568-263 568-263
PACKER Logan Part No. A9063 A9064 A9065 A9066 A9067 A90675 A9068
Bowen No. 9237-R B-4154-R B-7104-R M-98-RS 9243-R B-5244-R 9855-R
Outer Seal 568-263 568-263 568-264 568-264 568-263 568-264 568-264
PACKER Logan Part No. A9069 A90695 A9070 A9071 A9072 A9073 A9074
Bowen No. B-5260-R 98-R L-98-R B-5268-R 235-R 9055-R L-1060-R
Outer Seal 568-265 568-265 568-265 568-266 568-445 568-267 568-268
PACKER Logan Part No. A9075 A9076 A9077 A9078 A9079 A9080 A9081
Bowen No. B-5287-R 8956-R B-5300-R B-5308-R B-5324-R B-12825-R 26260-R
Outer Seal 568-266 568-268 568-269 568-270 568-269 568-271 568-273
PACKER Logan Part No. A9082 A9083 A9084 A9085 A9086 A9087
Bowen No. 5332-R 15805-R 33011-R 68031-R 64556-R 31656-R
Outer Seal 568-274 568-451 568-453 568-279 568-458 568-463
Logan Oil Tools reserves the right to change or discontinue designs without notice.
PACKER Logan Part No. A9950E A9000E A9001E A9002E A90025E A9003E A9004E
Bowen No. 9407E B-10202-E 9309-E L-1453-E 1453-E B-5089-E B-3395-E
Outer Seal 568-032 568-226 568-228 568-228 568-228 568-229 568-230
PACKER Logan Part No. A9005E A90055E A90056E A90057E A9006E A9007E A9009E
Bowen No. 8550-E 37588-E B-1839-E A-1831-E L-809-ES B-3594-E B-5107-E
Outer Seal 568-233 568-234 568-235 568-233 568-233 568-234 568-234
PACKER Logan Part No. A9010E A9011E A9012E A90125E A9013E A90135E A9014E
Bowen No. 809-E L-7090-E B-5118-E 1517-E L-1517-E 21303-E B-4625-E
Outer Seal 568-234 568-235 568-235 568-236 568-236 568-236 568-237
PACKER Logan Part No. A90145E A9015E A9016E A90165E A9017E A9018E A9019E
Bowen No. 4185-E L-6515-E L-7065-E 1253-E L-168-E L-6665-E 6665-E
Outer Seal 568-237 568-237 568-238 568-239 568-239 568-239 568-239
PACKER Logan Part No. A9020E A9021E A90215E A90217E A9022E A9023E A90235E
Bowen No. B-3219-R B-5538-R 9122-R L-6163-R 811-R 856-R 60947R
Outer Seal 568-239 568-240 568-239 568-238 568-240 568-241 568-241
PACKER Logan Part No. A9024E A9025E A9026E A9027E A90285E A9029E A9030E
Bowen No. B-5157-E A-1508-E B-4895-E L-1867-E B-4672-E 169-E B-2487-E
Outer Seal 568-242 568-243 568-242 568-243 568-244 568-244 568-246
PACKER Logan Part No. A9031E A9032E A9033E A9034E A9035E A9036E A9037E
Bowen No. B-2199-1E 1140-E 195-E B-2199-E 6114-E B-2362-E B-6387-E
Outer Seal 568-248 568-247 568-349 568-248 568-247 568-248 568-249
PACKER Logan Part No. A90375E A9038E A9039E A90395E A9040E A90402E A90405E
Bowen No. 1189-E B-2455-E L-5950-E 5950-E M-4505-ES 11826-E 4505-E
Outer Seal 568-250 568-249 568-250 568-250 568-252 568-251 568-252
Logan Oil Tools reserves the right to change or discontinue designs without notice.
PACKER Logan Part No. A90407E A9041E A9042E A9043E A9044E A9045E A9046E
Bowen No. 9209-E L-8618-E A-756-E 6697-E L-110-E 223-E B-5209-E
Outer Seal 568-252 568-253 568-254 568-255 568-359 568-437 568-259
PACKER Logan Part No. A9047E A9048E A9049E A90495E A9050E A9051E A9052E
Bowen No. L-1642-E 9689-E 1642-E 1680-E L-1680-E 9005-E 5508-E
Outer Seal 568-259 568-258 568-259 568-438 568-438 568-259 568-260
PACKER Logan Part No. A9053E A9054E A9055E A90555E A9056E A9057E A9058E
Bowen No. 9865-E L-6635-E 9136-E 1634-E A-1814-E B-5225-E 207-E
Outer Seal 568-259 568-439 568-260 568-260 568-260 568-261 568-261
PACKER Logan Part No. A90587E A9059E A90595E A9060E A90605E A9061E A9062E
Bowen No. L-8985-E 9224-E L-6310-E L-111-E 9231-E B-5357-E L-1025-E
Outer Seal 568-261 568-261 568-262 568-441 568-262 568-263 568-263
PACKER Logan Part No. A9063E A9064E A9065E A9066E A9067E A90675E A9068E
Bowen No. 9237-E B-4154-E B-7104-E M-98-ES 9243-E B-5244-E 9855-E
Outer Seal 568-263 568-263 568-264 568-264 568-263 568-264 568-264
PACKER Logan Part No. A9069E A90695E A9070E A9071E A9072E A9073E A9074E
Bowen No. B-5260-E 98-E L-98-E B-5268-E 235-E 9055-E L-1060-E
Outer Seal 568-265 568-265 568-265 568-266 568-445 568-267 568-268
PACKER Logan Part No. A9075E A9076E A9077E A9078E A9079E A9080E A9081E
Bowen No. B-5287-E 8956-E B-5300-E B-5308-E B-5324-E B-12825-E 26260-E
Outer Seal 568-266 568-268 568-269 568-270 568-269 568-271 568-273
PACKER Logan Part No. A9082E A9083E A9084E A9085E A9086E A9087E
Bowen No. 5332-E 15805-E 33011-E 68031-E 64556-E 31656-E
Outer Seal 568-274 568-451 568-453 568-457 568-458 568-463
Logan Oil Tools reserves the right to change or discontinue designs without notice.
When ordering, please specify:
(1) Specify catch size
Retainer Ring
Inner Seal
Mill Control
OVERVIEW
The Logan High Pressure Mill Control Packer (U.S. Patent 6-425-615)
is designed for use with Logan Series 150 Releasing and Circulating Over-
shots and has been successfully field tested and proven to 4,700 psi. The
unique design utilizes a steel retainer ring that can be easily installed and
removed with an adjustable spanner wrench to compress the inner seal.
(Inner Seals are listed on pages 34 – 35.) The steel retainer ring is also
machined with left-hand threads to prevent back-off. The body of the
Mill Control Packer and the steel retainer ring are machined with a series
of grooves to ensure maximum positive retention of the inner seal during
high pressure operations. Correct steel retainer ring installation and proper
inner seal squeeze are accurately defined when the retainer ring is flush
with the top of the Mill Control Packer body.
OVERVIEW
The Logan Series 150 High Pressure
Pack-off Assembly is for use in areas
with extreme pressure. They are avail-
able in 5,000 and 10,000 psi. Special
pressure packoffs are available upon
request. The assemblies listed below
are installed between the top sub and
Standard
bowl of the overshot. High Pressure
Top Sub Pack-off Assemblies for use between
the bowl and guide of the overshot, and
for overshots not listed, are available
upon request.
Special Notes:
(1) High Pressure Pack-off Assemblies
Retainer Ring
are used between the top sub and
bowl.
Removable (2) High Pressure Pack-off Assemblies
Inner Seal
for use between the bowl and guide
are available upon request.
Outer Seal
Packer Body (3) High Pressure Pack-off Assemblies
Guide Ring
Packer Assembly
for overshots not listed are available
Four (4) Required upon request.
(U.S. Patent 6-425-615) (4) Bi-Directional High Pressure Pack-
High Pressure off Assemblies are available upon
Pack-off Bushing request. (seals both internal and
external pressure)
Logan Oil Tools reserves the right to change or discontinue designs without notice. When ordering, please specify:
(1) Overshot assembly to be used with
* Includes O-ring, Inner Seal, and Retainer Ring
(2) O.D. of tubing or pipe size to pack-off
** Optional Spacer Ring for Bi-Directional Pack-off
Bowl
Spiral Grapple
Spacer Ring
(only used with Spiral Grapples
and Type A Packers)
OVERVIEW DISASSEMBLY
Logan Lock Rings provide a posi- The pitch of the cam-teeth is greater A special breakout clamp is required
tive means for locking and releasing than the thread pitch of the bowl. When when unthreading is desired. Slight
straight-threaded, shouldered joints reverse rotation is applied, the cam- right-hand torque may be needed to
that will not back off. Lock Rings are toothed edges will wedge against each align the breakout grooves so they may
installed between the top sub and the other to effectively lock the top sub to receive the clamp. The breakout clamp
bowl, and are designed to keep the top the bowl. consists of two keys that fit into the lock
sub from inadvertently unthreading from ring grooves — a lower key seat and
ASSEMBLY
the bowl. Lock Rings are typically used a movable key seat that is attached to
when a significant amount of torque is Position the rings together so the break- a bracket guide and a screw handle.
being applied through the overshot to out grooves align and the cam-teeth A linked chain is attached at one end
the fish (such as encountered during are intermeshed. Place the lock rings to the bracket guide.
back-off operations). Excessive torque on the top sub. As the bowl is threaded
and the tool joint made-up, the knurled Back out the screw handle as far as
is not necessary when Lock Rings are
faces opposite the cam-teeth will grip it will go. Position the breakout clamp
used. Lock Rngs eliminate the hazard-
the shoulders. by placing the keys in the ring grooves
ous practices of using steel straps or
opposite each other. Insert one end
install-ing set screws to secure the bowl Heavy make-up torque is not necces- of the linked chain into the hole in the
to the top sub. Lock Rings can be used sary. Joints are properly made up when lower key seat. Pull the chain around
with either a basket or spiral grapples. reverse rotation is applied and the cam- the rings and remove all slack. Slip
CONSTRUCTION teeth shoulders slightly separate. the chain pin closest to the pin slot onto
Logan Lock Rings are precision ma- A spacer is required if the overshot is the bracket. Tighten the screw handle
chined from strees relieved, heat-treat- dressed with a spiral grapple and a to force both keys into the breakout
ed alloy steel. Lock Rings are used in type A packer. The spacer is installed grooves. When the grip is broken, the
pairs and consist of two identical rings into the bowl and on top of the Type A keys will hold the cam-teeth together
with cam-teeth on one face, knurls on packer. The spacer fills the void pro- and allow the shoulders to back away
the other, and two break-out grooves duced by the extra standoff caused by from the knurled faces.
on the edges. the top sub and lock rings. A spacer When ordering, please specify:
is not required when a type A packer (1) Part number of the complete
is not used. assembly for selected overshot
42 • Logan Series 150 Releasing & Circulating Overshots
Calculated Strengths
NOTES:
1) All strengths are calculated theoretical yield points and are accurate within 20%. All strengths assume a straight, steady pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
2) No tong marks should be applied to the bowl. Tong marks and other surface damage to the bowl will also reduce the strength.
NOTES:
1) All strengths are calculated theoretical yield points and are accurate within 20%. All strengths assume a straight, steady pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
2) No tong marks should be applied to the bowl. Tong marks and other surface damage to the bowl will also reduce the strength.
NOTES:
1) All strengths are calculated theoretical yield points and are accurate within 20%. All strengths assume a straight, steady pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
2) No tong marks should be applied to the bowl. Tong marks and other surface damage to the bowl will also reduce the strength.
sales@loganoiltools.com
Texas
101 Commerce Street
Alice, TX 78332
Tel: (361) 396-0139
Fax: (361) 396-0112
Utah
1369 South 1100 East
Vernal, UT 84078
Tel: (435) 781-2856
Fax: (435) 781-2858 www.loganoiltools.com Series 70 and 150 Overshots