Professional Documents
Culture Documents
REAR DIFFERENTIAL MOUNT RUBBER REMOVAL INSTALLATION
REAR DIFFERENTIAL MOUNT RUBBER REMOVAL INSTALLATION
REAR DIFFERENTIAL MOUNT RUBBER REMOVAL INSTALLATION
id031400803000
id031400803000
1.Remove the fuel tank. (See FUEL TANK REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITH
CYLINDER DEACTIVATION)].) (See FUEL TANK REMOVAL/INSTALLATION [SKYACTIV-G 2.0,
SKYACTIV-G 2.5 (WITHOUT CYLINDER DEACTIVATION)].) (See FUEL TANK
REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
ac5uuw00009363
3.Place alignment marks on the rear crossmember and rear differential mount rubber as shown in the
figure.
ac9uuw00008078
5.Install in the reverse order of removal. (See Rear Differential Mount Rubber, Bolt Installation Note.)
1.Align the alignment marks on the rear crossmember and rear differential mount rubber, and install the
rear differential mount rubber.
Note
• When newly replacing the rear differential mount rubber, place alignment marks on the new part in
the same positions as the removed rear differential mount rubber.
ac9uuw00008080
4.Shake the rear differential forward and back/left and right to improve the installation fit of the rear
differential.
Tightening torque