Professional Documents
Culture Documents
WSCAD_SUITE_2015_Software_Installation
WSCAD_SUITE_2015_Software_Installation
Software Installation
Table of Contents
General ................................................................................................................................. 1
Introduction ........................................................................................................................ 1
Operating Systems ......................................................................................................... 1
Existing Installations ....................................................................................................... 1
First WSCAD Installation ................................................................................................ 1
CodeMeter® Concept..................................................................................................... 1
System Requirements WSCAD SUITE .............................................................................. 2
WSCAD SUITES ............................................................................................................... 3
Download Tool ...................................................................................................................... 5
WSCAD SUITE Download Tool ......................................................................................... 5
Method to install ............................................................................................................. 5
Single Place .......................................................................................................................... 8
Single Place Installation ..................................................................................................... 8
Start Installation.............................................................................................................. 8
Network ................................................................................................................................16
Network Installation...........................................................................................................16
Server Installation Generally .........................................................................................16
Server Installation with Administrator rights for the domain ...........................................17
CodeMeter Runtime Server Installation............................................................................24
Start Installation.............................................................................................................25
Call Control Center/WebAdmin......................................................................................29
Client Installation with Admin-Rights .................................................................................33
Installation WSCAD SUITE ...........................................................................................33
Installation-Directory......................................................................................................38
Calling Control Center and WebAdmin ..........................................................................39
Client Installation without Admin-Rights ............................................................................39
Installation WSCAD SUITE ...........................................................................................40
CodeMeter Software ............................................................................................................46
CodeMeter Control Center ................................................................................................46
CodeMeter Software .....................................................................................................46
CodeMeter Help Software .............................................................................................46
Menu Bar/Processes .....................................................................................................47
License Tab...................................................................................................................47
CodeMeter WebAdmin......................................................................................................51
CodeMeter User Help-Software.....................................................................................51
Tabs Content/CmContainer ...........................................................................................51
Tabs Content/Licenses ..................................................................................................52
Tab Server ....................................................................................................................53
ii
Table of Contents
iii
General
Introduction
During installation of the SUITE Software it is necessary to note the preconditions of the
installation. These are for example the SUITE CD and the belonging serial number which you
have received from WSCAD.
Operating Systems
The WSCAD-SUITE uses the Microsoft operating systems. Please be aware of the System-
Recommendations which are noticed in the next page.
Existing Installations
In the case of existing installations e.g. WSCAD 5.x the use of the WIBUKEY Software is
necessary.
CodeMeter® Concept
CodeMeter is a mobile all-rounder and an expert of security of WIBU Systems.
State-of-the-art methods are used for the encryption, which assure a maximum of security.
The fact, that the basic features are integrated in the hardware increases the security and
ensures that it will run on all operating systems, which support USB sticks.
1
WSCAD SUITE 2015 Software Installation
2
General
WSCAD SUITES
The WSCAD SUITES supports the following Technologies.
Add-On's are
You can select the individual SUITES freely. However, individual technologies are also
available in their respective version levels.
Other variants will be added in the future. Further information is available on the WSCAD
home page.
3
WSCAD SUITE 2015 Software Installation
Video in German
Hotline
Fon: +49 (0) 8131 / 3627 - 99
Fax: +49 (0) 8131 / 3627 - 51
support@wscad.com
Sales
Fon: +49 (0) 8131 / 3627 - 98
Fax: +49 (0) 8131 / 3627 - 52
sales@wscad.com
Training sessions
Fon: +49 (0) 8131 / 3627 - 90
akademie@wscad.com
4
Download Tool
Method to install
E-Mail
First you will get an E-Mail from WSCAD. There is an ZIP-file enclosure. The file is to save in
your local working area and to unpack.
The unpacked file includes an exe file with the name 'WSCAD.Internet.exe'. This file has to
be started.
WSCAD Download
The wizard for downloading is open now. The size of the program is about 920 MB.
Depending of the computer environment it uses some time to download.
5
WSCAD SUITE 2015 Software Installation
In this case you have to enter the Username and the Password normally.
If you have to set the data for the Proxy server (IP-Adress, Port etc.), please contact
your System administrator to get the settings.
Starting Download
With the OK-Button the Download starts. WSCAD SUITE is located then in the appropriate
folder.
6
Download Tool
Starting Installation
After downloading the installing can be started.
If the Setup is interrupted, it must be started with the 'setup.exe' in the download directory
again.
The dialog WSCAD Install Shield is open now. (see Installation in the next pages)
Target directory
If there is no destination directory selected, the files are copied in the Windows Temp-
Directory
and will be deleted later.
That means not the installation directory. These will be defined in the setup.
With click in the line 'Choose target directory' you can save the software in an desired folder
via the Explorer.
Hint 1
It is to recommend to use an empty folder because you have an mixed with the existing
folders.
Hint 1
If you want to copy on a data media (DVD, Stick etc.) it is to recommend to download on a
local directory and to copy it thereafter.
7
Single Place
The Installation-Software of the CD loads the belonging runtime parts of the dongle
automatically !
Hint
The Information about the different variations are in the following chapters.
Start Installation
If the installation does not start automatically, you can start the installation by using Windows
Explorer selecting your CD drive and then select the file Setup.EXE.
8
Single Place
9
WSCAD SUITE 2015 Software Installation
10
Single Place
Hint
If you want install in the same directory you will get warning. It is possible to install a second
installation parallel to the other one.
11
WSCAD SUITE 2015 Software Installation
Selection of features
In this case it is possible to select software components of the suite. The not selected parts
are not overwritten.
The Runtime-Software oft the applied dongle is located on the CD and will be loaded
automatically.
12
Single Place
13
WSCAD SUITE 2015 Software Installation
Status Display
After installing WIBU CodeMeter runtime software WSCAD SUITE follows.
The installation needs some time. It depends of the computer.
14
Single Place
Setup-Program is complete
Select now README file and/or Desktop link.
15
Network
Network Installation
In this case of installation the program files are stored into a common drive of the server. All
WSCAD SUITE users (Clients) can then handle the Software licenses. The single user has a
simply configuration in his local Windows-System.
Hint
Be sure that you have the necessary rights to create folders and copying files !
To be in doubt ask your network administrator.
Second step is the client installation. A setup-file (netsetup.exe) is started from the client.
This setup transfers necessary local files for configuration and OCX-Controls in the local
Windows operating system.
All other files (e.g. libraries, databases ..) remain on the server so that all users have access
to it.
The Server-Installation is independent of the CodeMeter-Dongle.
The installation of the CodeMeter Software can be done separately as described in the
following chapter.
There is one Dongle for all users in the network, which limits the number of users. The
dongle is normally located at the server, it can be placed at the local workstation too.
This setup transfers necessary local files for configuration and OCX-Controls in the local
Windows operating system.
16
Network
17
WSCAD SUITE 2015 Software Installation
License Agreement
The License can be printed too.
18
Network
19
WSCAD SUITE 2015 Software Installation
Use button Browse and select your destination folder at the server.
Hint
The folder should not have any data because they will be overwritten !
20
Network
Start Copying
The current settings are presented. They can be corrected with button Back.
21
WSCAD SUITE 2015 Software Installation
Setup Status
The indication bar shows the progress of the installation.
Hint
The installation depends on the access time of the server. That takes some minutes
sometimes.
22
Network
Setup is finished
You can select the README file if you want.
Sharing a folder !
The appropriate folder of the server has to be released by the administrator. The user needs
the rights for the directory.
Network drive
A network drive can be defined to get an easier access.
Additional Informations
Settings and informations for the CodeMeter can you find in Control Center Help and in the
WebAdmin.
23
WSCAD SUITE 2015 Software Installation
Hint
The CD can be used too.
24
Network
Start Installation
After starting the following display is active.
License Agreement
The License can be printed too.
25
WSCAD SUITE 2015 Software Installation
26
Network
Go on with Next.
27
WSCAD SUITE 2015 Software Installation
Start Installation
Go on with Installation.
28
Network
Complete Setup
Close Setup.
29
WSCAD SUITE 2015 Software Installation
Tab Content/CmContainer
30
Network
Tab Configuration/Server
The option 'Run Network Server' has to be set. The clients uses the server as License
Server.
Hint
To make changing active you have to start and stop the CodeMeter service in the Control
Center.
31
WSCAD SUITE 2015 Software Installation
Important Informations
Additional informations are to find in the Help function of CodeMeter Control Center or
WebAdmin..
32
Network
33
WSCAD SUITE 2015 Software Installation
Information Display
34
Network
35
WSCAD SUITE 2015 Software Installation
Information Display
The CodeMeter Software is installed automatically.
36
Network
Setup Status
Tip
The time to finish needs some minutes. Please wait until the dialog arises.
37
WSCAD SUITE 2015 Software Installation
Installation-Directory
The folder includes some informations and applications.
38
Network
In the Tab Content you can recognize, that no CodeMeter is on the workstation (client).
Important Informations
Additional information are to find in the Help function of CodeMeter Control Center or
WebAdmin.
39
WSCAD SUITE 2015 Software Installation
40
Network
Info-Display
41
WSCAD SUITE 2015 Software Installation
42
Network
Info-Display
CodeMeter-Software is installed automatically.
43
WSCAD SUITE 2015 Software Installation
Status Display
Tip
The time to finish needs some minutes. Please wait until the dialog arises.
44
Network
Installation-Directory
The folder includes some informations and applications.
Important Informations
Additional information are to find in the Help function of CodeMeter Control Center or
WebAdmin..
45
CodeMeter Software
CodeMeter Software
The application of the Control Center is in the appropriate directory.
Quick links
To find basic links there is a list for it.
46
CodeMeter Software
Menu Bar/Processes
Update Time Certificate
Updates the time certificates in the selected CmContainer. All time stamps are refreshed.
Start Stop Service
In some cases the CodeMeter has to be stopped started new. The system shows you in
which case.
License Tab
The "License" Tab shows you information on connected CmContainer and provides some
options to configure connected CmContainer. Moreover, you are able to update licenses
located in your CmContainer using the CmFAS Assistant.
47
WSCAD SUITE 2015 Software Installation
Firmware Update
Click this button to request new, or update existing licenses for selected CmContainer. The
CodeMeter Field Activation Service (CmFAS) Assistant opens.
License Assistant
An Internet connection is necessary to launch the assistant because an access to
WSCAD-License Server has to be done.
48
CodeMeter Software
The starting dialog prompts you to proceed. There you select from creating a license request,
import a license update you received from the software vendor, or, optionally, create a
receipt after an update to send it to the software vendor.
49
WSCAD SUITE 2015 Software Installation
Borrowing Tab
This tab informs on borrowable licenses as a feature of CodeMeter license borrowing.
Then licenses can also be used when the access to license information does not require to
be connected to the license server.
Hint
You can toggle the view of this tab using the "View/Borrow visible" menu item.
50
CodeMeter Software
CodeMeter WebAdmin
An active internet connection is necessary to use the WebAdmin.
In the WebAdmin there are a lot of functions and informations about the CodeMeter Dongle.
Additional the user Help Software of the WebAdmin.
Tabs Content/CmContainer
All important Infos are to see here.
51
WSCAD SUITE 2015 Software Installation
Tabs Content/Licenses
The installed Licenses and the Product Codes can be displayed here.
52
CodeMeter Software
Tab Server
The installed Licenses on the server and the Product Codes can be displayed here.
Tabs Configuration/Network
Use a Server Search List to define access to and order of CodeMeter network LAN and WAN
(Wide Area Network) servers.
Tips
For another Configurations and Informations look at the User Help for CodeMeter
WebAdmin.
53
WSCAD SUITE 2015 Software Installation
Tabs Configuration/Server
Important is the option ´Run Network Server´. In this case the server is the base for the
WSCAD-Clients and serves the licences.
Tip
Changes only take effect after restarting CodeMeter.
54
CodeMeter Software
Tabs Configuration/WebAdmin
In this tab the Language can be changed.
Tip
Changes only take effect after restarting CodeMeter.
Another Tabs
For more informations about single tabs please use the extensive User Help-Software for
WebAdmin.
55
WibuKey Software
Hint
The CodeMeter Dongle shall not be adapted.
56
WibuKey Software
Language
Choose you preferred Language.
Info-Display
The Settings of the installation are shown.
57
WSCAD SUITE 2015 Software Installation
Finishing Installation
You can select the information text if you like.
58
WibuKey Software
Precondition of WkLAN)
The settings of the WibuKey driver can you find in the system settings of server and clients.
59
WSCAD SUITE 2015 Software Installation
Server Settings
Select Expert modus via the icon menu and expand the additional settings.
60
WibuKey Software
Open tab Server WkNet and control setting of Active. It is not set.
Tip
It is important that the server service is running. This can be controlled via system
settings in the menu Organization/Service !
61
WSCAD SUITE 2015 Software Installation
Client Settings
Open the dialog like before and select Network tab.
Select Subsystem WkLAN and activate button Search to find and set the appropriate server.
It is possible to set a sequence of the server how the searching should be done. Put your
desired server in the first row.
With Apply and/or OK the settings are saved and the process client server should be run.
Hint
If the WibuKey Server should be run as client too, the settings of the server must be done as
in the clients.
62
License Update
In this case the CodeMeter has a WSCAD SUITE 2012 license only and needs the WSCAD
SUITE 2015 variation additionally.
This can be done via WIBU Ticketing System automatically. This must be done for every
CodeMeter Dongle
Hint
The CodeMeter driver must no more installed because that has to be done in 2012
installation.
CodeMeter Update
The CodeMeter has to plugged in the appropriate workstation which carry out the update.
If you start the WSCAD SUITE 2015 the License Update file opens automatically.
A connection check to the License service via Internet is now carried out.
63
WSCAD SUITE 2015 Software Installation
The Product key in the WIBU Ticket Service has been checked.
64
License Update
With Apply the licence is transferred in the dongle. The operation can not be redone.
65
WSCAD SUITE 2015 Software Installation
66
License Update
WSCAD SUITE 2014 can be started with the selected option at once.
67
WSCAD SUITE 2015 Software Installation
If you start the WSCAD SUITE 2014 the License Update file opens automatically.
A connection check to the License service via Internet is now carried out.
68
License Update
Go on with Apply.
69
WSCAD SUITE 2015 Software Installation
With button Update the CodeMeter are reread and the file data updated.
70
License Update
With Apply the next dialog is open and the updated file is to save.
This file can you copy e.g. in a stick and send it per Email via a workstation with internet. The
file is in the appendix then.
The Email is then passed to Wibu Ticket System via WSCAD. The updated file is then
returned to you automatically in a short time.
The Extension of the file is now ....WibuCmRaU.
Please copy the file in the appropriate workstation, where the CodeMeter is located, and start
the application with double click.
71
WSCAD SUITE 2015 Software Installation
72