Professional Documents
Culture Documents
2.2.9 KaMOS® Patented BX Gasket dimension for all available size
2.2.9 KaMOS® Patented BX Gasket dimension for all available size
Centerline
Type 6BX flanges are of the ring joint type and are designed with a
B
raised face. Depending on tolerances, the connection make-up bolting
force may react to the raised face of the flange when the gasket has
been properly seated. This support prevents damage to the flange or
gasket from excessive bolt torque. Therefore one of the flanges in a
6BX connection shall have a raised face. The type 6BX flange shall
D
be on the through-bolted or studded design. A
C = approx 50 mm
KaMOS® BX Gaskets height is modified to fulfill requirements of distance between flanges for pressure pipe
KaMOS® BX Gasket: H = 5 mm higher than standard
Pressure class rating MPa (psi) Outside dia. KaMOS® Width Approx
Hole size
of ring height of ring of ring Weight
34,5 69 103,5 138
Ring no.
(5000) (10 000) (15 000) (20 000) OD H A D Kg
Nominal pipe size (inches) Dimensions in millimeters
NOTE: Face to face contact is not necessary for the proper functioning of the type 6BX flanges
Patented
Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2019 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.