Professional Documents
Culture Documents
Atlantis Cafe Mini
Atlantis Cafe Mini
Name of Purchaser :
Date of Purchase :
Manufactured by:
THE VENDING COMPANY
PLOT NO - 28, SECTOR- 4,
IIE, SIDCUL, PANTNAGAR,
RUDRAPUR, UTTARAKHAND CUSTOMER COPY
INDIA - 263153
Model :
Name of Purchaser :
Date of Purchase :
Manufactured by:
THE VENDING COMPANY
PLOT NO - 28, SECTOR- 4, Please read the instructions carefully prior to using the product.
IIE, SIDCUL, PANTNAGAR, Actual design and color may vary from the images shown.
The pictures are used for representation purposes only.
RUDRAPUR, UTTARAKHAND MERCHANT COPY Note:- The machine specications are subject to change without notice.
INDIA - 263153
USER’S MANUAL HOT BEVERAGE DISPENSER
Only trained service technician are authorised service/dismantle any component Operating Voltage 24 V DC 24 V DC 24 V DC
of the m/c. Start Up Time 8 Minutes 8 Minutes 8 Minutes
Appropriate ELCB is be provided by the outlet before installation of the m/c. Premix Canister /Capacity 2 Nos. of 1.2 Kg. each 3 Nos. of 1.2 Kg. each 4 Nos. of 1.2 Kg. each
Dispensing Rate 4 cups per minutes 4 cups per minutes 4 cups per minutes
Proper earthing is must with 3 pin, 15A supply socket at the outlet.
Front Door ABS Moulded ABS Moulded ABS Moulded
Switch off the power supply and unplug the main supply cord before carrying Steam Dispersion
out any cleaning and maintenance operations. Exhaust Fan Exhaust Fan Exhaust Fan
Hot Water Tank Material/Capacity SS 304 Stainless Steel SS 304 Stainless Steel SS 304 Stainless Steel
Do not touch the machine with wet or humid hands.
3.0 Ltr. 3.0 Ltr. 3.0 Ltr.
Do not unplug the machine from the source by pulling the power supply cable.
* Actual design, colour and specications may very from the images shown.
Do not allow children or untrained people to play with machine.
1 2
PARTS IDENTIFICATION
59
60 49 64 65 66 67 68 69 70 71 72
61 62 63 48
USER’S MANUAL
47
46
45
50 51 52 53 54 55 56 57 58
31
36 37 38 39 40 41 42 43 44
30
35
29
34 28
27
33
26
32
25
24
23
22
1
21
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
3
PART IDENTIFICATION
4
USER’S MANUAL HOT BEVERAGE DISPENSER
PLEASE NOTE THAT THE MACHINE ARRIVES WITH DEFAULT SETTINGS Press HALF and the display would show PREMIX2 3.75. This refers to the quantity
OF 12.7 GMS OF PREMIX AND 90 ml OF WATER. YOU CAN CUSTOMIZE of tea powder dispensed. Changes can be made as above. .
T H E S A M E T O Y O U R TA S T E B Y F O L L O W I N G T H E S I M P L E
INSTRUCTIONS BELOW. . Press HALF again for WATER 2 (water from the tea side). Make changes as above.
Note that the setting for WATER would always be 1.0 sec more than the respective
For half cup, please press the HALF switch and then your choice of either premix. This would ensure that the water would always flow more than powder and
COFFEE or TEA. . not allow accumulation of powder in the mixing bowl. .
Similarly for just hot water, press HOT WATER followed by COFFEE or TEA.
This feature can also be used for flushing out the system at the beginning of the Press HALF button again and the display shows HOT WATER 5.0. This is the
day for cleaning purposes. . quantity of water which is dispensed when we push the HOT WATER button .
The STOP switch is used when an incorrect choice has been made and we would The quantity can be adjusted by using the COFFEE and TEA buttons and saved by
like to abort the operation midway . pressing the HALF button as above. .
In case the temperature of the water is less than 10 degree C, of set temperature
the machine would not dispense any premix or water . Press HALF again and the display shows TEMP 85. Again this can be adjusted (to a
In case the water level in the container is low, the display would show maximum of 89 degree) by using the coffee and tea (up and down) switches.
WATER LEVEL LOW and the buzzer would sound. The machine would not
dispense in this mode. THE DEFAULT PASSWORD IS CURRENTLY ENTERED BY PRESSING HALF 5
TIMES. NO NUMBER NEEDS TO BE ENTERED. .
Press HALF again and the display would show ENABLE COIN. Only applicable
to coin operated machine. Using the COFFEE and TEA we can enable – YES or
disable the coin mechanism - NO. .
5 6
USER’S MANUAL HOT BEVERAGE DISPENSER
Press Half again and we now enter the SET FLUSH mode. Here we have the following TROUBLESHOOT
options (all available using the COFFEE/TEA switches). If we want to flush the machine
at regular intervals, specially when not in use, then we should enable – YES, this option.
Specific fault message will be displayed when the m/c stops dispensing.
We recommend this as well, because it not only cleans the water pathways, but also keeps
List of fault messages, their possible cause and remedial action are listed blow.
them warm. If you choose YES, then you can set the flush time interval to 10/ 30/60/90 mins
depending upon usage of the machine. If the machine is used extensively, then a higher
interval is recommended. .
Next mode on pressing HALF is the SET DEFAULT option. In you enable the same 1. If display show “Heating....” 1. Check heater fuse. If fuse has blown off, replace it.
by imputing YES, then all settings of water, powder, temp etc would be restored to the for more than 10 minutes 2. Check loose connections continuity at heater/
factory settings. . fuse/holder/relay/terminals
3. Check loose connections at main PCB connector
Press HALF and the screen would show CNTR RESET. Pressing TEA would show and rectify.
YES. Then you have to enter the password and the counters of coffee and tea would 4. Check 230 volt AC supply across heater terminal,
be reset to 0. . if power supply not detected replace heater.
Press HALF again and we have the USER MESSAGE change option. Using the 5. If power supply not detected, check DC signal
COFFEE TEA and HALF buttons (for saving) you can actually change the name on the across relay terminals.
display to your choice. A unique feature only on ATLANTIS machines. a.) If power supply not detected replace relay.
Lastly pressing HALF would show CHANGE PASSWORD. Press TEA and the YES b.) If power supply not detected, then replace PCB.
option appears. Press HALF again and ENTER the old password followed by the new
password twice. .
Press HALF again and the machine display shows “returns to the regular MAKE 2. If display shows 1. Check water level in bottle top
YOUR CHOICE mode. “Water tank empty” 2. Check continuity of sensor wire from PCB to tank
PROGRAMMING INSTRUCTIONS – CAFÉ PLUS 3. Overheating in boiler tank 1. check loose connection of temperature sensor on
the boiler.
The 3 and 4 lane machines are programmed in a very similar manner to the Café mini. 2. Check DC signal across heater relay terminal
The main differences have been highlighted . a) If power supply not detected, replace repay.
The five buttons are named BEV 1, BEV 2, BEV 3, BEV 4, STOP. . b) if power supply not detected, replace
BEV 1 and BEV 2 buttons does the same function as the COFFEE button to temperature sensor.
increase/decrease time and toggle to enable or disable functions. BEV 3 is the
4. Electric shock 1. Check earthing / polarity in supply socket.
equivalent of the HOT WATER button in the 2 lane Café mini and is primarily for
2. Check water leaking inside the machine and
saving and moving on to next mode. .
rectify it.
IN the Café Plus, to get hot water or half cup, just press the STOP button once and
3. Ch loose connection of earthing wire with
then the BEV button of your choice to get hot water/half cup of drink from that lane.
machine body.
A longer press of the STOP button and you can enter the MENU mode and follow the
4. check continuity between machine body & earth
same instructions as the Café Mini programming. .
pin on 15 Amp power plug. if continuity is not there
NOTE THAT THE ATLANTIS MACHINES HAVE A LOT OF OTHER FEATURES replace power cord
LIKE LANGUAGE CHANGE AND CALIBRATION WHICH CAN BE ENABLED
UNDER SUPERVISION OF AN AUTHORISED ENGINEER FROM THE COMPANY. 5. As soon as machine is 1. Check correct rating of MCB.
switched on power supply
trips. 2. Remove 15 Amp fuse & switch on. If it is tripping
again, reconnect the same & if it not tripping,
replace heater.
7 8
USER’S MANUAL HOT BEVERAGE DISPENSER
4. The warranty is void if : .
3. Remove SMPS AC supply connector & switch on. a) It is found that the unit has been subject of unauthorized installation or repair.
If it is tripping, reconnect the same & if it is not b) The voltage of the power supply is not within the specified limited .
(230 V 50Hz + _ 10%) .
tripping, replace SMPS.
c) The damage is caused during transit, due to accident, flood, fire, other natural
4. Remove Exhaust fan wire & switch on. If it is not hazards, neglect of misuse.
tripping, replace exhaust fan. 5. Any liquid except water in the container.
6. machine is shipped (out side premises) without prior information.
6. Bubble top is full, no 1. Check loose connection & continuity between WARRANTY INSTRUCTIONS FOR USER
dispensation of water while main PCB & water level sensor.
1. This warranty card has 2 parts. kindly ensure that the Merchant fills all parts correctly
pressing dispensing button 2. Replace level sensor. 2. Part A is the customer’s copy. It should be retained by you for your record.
only premix is dispensing 3. Replace main board 3. Part B must be torn and mailed to the company’s address (mentioned there itself.)
4. In the event of a defect developing in the product, contact the Merchant. .
7. Variation in end cup volume 1. Check scaling in value & clean it. of company for obtaining warranty service by informing defect, Model & Serial No.
2. replace dispense valve. 5. On your loading a complaint, trained technician will call on your promptly. In the
unlikely event of the technician deciding that the product requires attention at
8. Premix clotting in canister 1. Check exhaust fan whether working or not. customer care center, kindly arrange to deliver the Machine to the customer care
elbow 2. If exhaust fan working, check exhaust pipe center for further action.
connected properly between fan & duct. Connect
it properly. If it is not working, check loose
connections at exhaust fan.
3. Replace exhaust fan.
9. Variation in end cup taste 1. Check level of ingredient inside the canister.
Rell if it is below minimum level.
2. Check whipper motor whether working or not.
If it is not working, check the voltage across
motor terminal.
a) If power supply detected, replace whipper motor.
b) If power supply not detected, check loose connection.
c) Replace main board.
WARRANTY CONDITIONS
This product is covered under a one year warranty to be free from defects is
workmanship and material under normal use and service for a period of 12 months
from the date of purchase.
1. The guarantee extended herein is limited to the repair and/or replacement of defective
part (s), and the manufacturer would not be responsible for any consequential liability/
damage/ loss arising due to such defects .
2. Warranty card duly filled in and stamped by the dealer, along with a copy of the invoice
should be produced for and warranty claims. All expenses incurred in sending and
collecting the unit or part thereof from the authorized service center will be payable
by the customer .
3. This warranty dose not cover accessories such as main cord, relay, membrane
switch, funnel and plastic parts. .
9 10