Professional Documents
Culture Documents
6
6
6
155
136 0.90m
110 183mm
19.6
150mm 50mm
VARIES
19.6
0.15
0.9m DIAMETER CONC. PAD IN
GRAVEL OR DIRT ROADWAYS & AND COVER MARKED "W"
OUTSIDE OF TRAVELED
77.71
W ROADWAYS
27.9
150mm PVC CLASS
0.15
150 WATER PIPE
68
PVC PIPE
9.5
INSTALLATION
14
50
3" &
PIPE DIAMETER in. 4'' 6" 8" 10" 12" 14" 16" 18" 20" 24"
under
13 13
10 163 10
6. WRENCH NUT mm.
75mm
100 150 200 250 300 350 400 450 500 600
&under
5. STEM
MINIMUM "W" 0.20 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.90
3. PACKING BOX MAXIMUM "W" 0.30 0.70 0.75 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.20
VALVE BOX & COVER DETAIL 7. O-RING
2. BONNET
NOTES:
8. SEAL
1. Design of Gate Valve in conformance with AWWA C-509 1. BODY
Specifications. LEGEND:
2. The Valve shall be Non-Rising Stem with a minimum of RECOMMEND MATERIAL SPECIFICATIONS
9. BOLT PART NAME
two (2) NBR 'O' Ring Seals.
3. The Valve shall have a 2" Square Operating Nut with a 1. BODY DUCTILE IRON
cast arrow mark opening. 2. BONNET DUCTILE IRON
4. Counterclockwise opening direction.
3. PACKING BOX/PACKING GLANDS DUCTILE IRON & GRADE A, B, C, D, OR E
5. External and Internal Body Coating shall be
electrostatically applied Epoxy Resin. 4. WEDGE RESILIENT WEDGE MADE OF DUCTILE IRON CORE FULLY
4. WEDGE ENCAPSULATED W/ EPDM RUBBER W/ INTEGRAL WEDGE
6. Rate working pressure shall be 200 psi.
NUT OR DESINFICIFICATION RESISTANT BRASS
7. All valves must conform to DCWD Standards and
Specifications.
5. STEM STAINLESS STEEL
8. Prior to the pipe laying; material testing must be 6. WRENCH NUT DUCTILE IRON OR STAINLESS STEEL
conducted and a Certification from the DCWD Materials 7. O-RING NBR ASTM D-2000
and Quality Control Inspector will be secured. 8. SEAL NBR ASTM D-2000
9. All things must be Ductile Iron in accordance to DCWD
9. BOLTS STAINLESS STEEL
Standards and Specifications.
PROJECT TITLE: PREPARED BY: CHECKED BY: REVIEWED BY: SUBMITTED BY: RECOMMENDING APPROVAL: APPROVED BY: SHEET NO.